)]}'
{
  "commit": "3678b68ef27db3b7c6c21f95bdacf9ec7fb01d4d",
  "tree": "d1ecb0bcdf43ee7d8872fa202e223f3dfb8b5780",
  "parents": [
    "96850e30ccf404da801c0afff077756c0950462e"
  ],
  "author": {
    "name": "pigweed-roller",
    "email": "pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com",
    "time": "Mon Oct 13 05:34:31 2025 -0700"
  },
  "committer": {
    "name": "CQ Bot Account",
    "email": "pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com",
    "time": "Mon Oct 13 05:34:31 2025 -0700"
  },
  "message": "roll: third_party/pigweed roll: zephyr\n\n18d885d tests: libc: thread: fix -Wformat errors\necffdac tests: posix: fix -Wformat errors\nba91479 tests: mcumgr: Improve compatibility with 64-bit platforms\na8677f5 tests: drivers: flash: fix test_storage_partition\n5547392 tests: bsim: bluetooth: host: misc: hfc: Enable auto-initated procedures\n87ffb97 samples: subsys: display: add stm32f469_disco conf file\nd3f9893 samples: drivers: display: add stm32f469_disco conf file\nd4a8099 boards: st: add pllsai for ltdc \u0026 mipi-dsi support on stm32f469 disco\na7a751c dts: arm: st: add mipi_dsi node in stm32f469.dtsi\nc3a0daf boards: nordic: Arduino SPI high drive strength\nc9d3a01 arch: arm: specify max MPU regions for CONFIG_ARMV7_M_ARMV8_M_MAINLINE\nb8419e6 dts: rw6xx: Update the power mode exit latency\n7bbecd8 scripts: kconfig: fix dt_nodelabel_int_prop crash if prop doesn\u0027t exist\n48d3aef samples: basic: button: Disable led on xgm240 boards\n3506523 boards: silabs: Add xgm240_rb4316a and xgm240_rb4317a\nf18b433 dts: arm: silabs: Add xgm24 modules\nb6f5b59 boards: silabs: Add xg24_rb4186c board\n4010d39 boards: silabs: Tidy up xg24_rb4187c board definition\n8a9a469 boards: silabs: Move xg24_rb4187c to shared xg24 directory\n41a35de drivers: ethernet: eth_w5500\n0e83446 include: zephyr: drivers: sensor.h: fixed inline code format\n4187375 tests: http_server: remove duplicated CONFIG_ZVFS_OPEN_MAX\n406675d drivers: flash: andes_xip: rename define\nbba57b2 drivers: bluetooth: hci spi: Add missing semicolon\n760d0cd samples: mcumgr: smp_svr: correct overlay-udp.conf to udp.conf\nb69b064 fs: littlefs: add api call for lfs_fs_gc\n3ac4f92 Bluetooth: Classic: OBEX: Optimize MOPL configuration\n26065ec Bluetooth: Classic: GOEP: Support multiple OBEX sessions\nb62be03 drivers: memc: stm32_xspi_psram: fix command size in x8 mode\nc47e606 tests: add kit_pse84_eval overlays for gpio_basic_api testsuite\n1c90409 boards: add support for ifx kit_pse84_eval\nc83c6df drivers: uart: update ifx uart_pdl driver for kit_pse84_eval\n69c6492 drivers: add ifx pinctrl driver updates for kit_pse84_eval\n281e52f drivers: clock_control: add clock_control support for kit_pse84_eval\n5d3741c drivers: clock_control: rename files related to ifx clock_control\n3064c0f dts: add devicetree support for ifx edge devices\n618be35 modules: update hal_infineon module for infineon \"edge\" soc\n03a6bb2 soc: add support for ifx edge socs\n6ef6fcf modules: update revision of hal_infineon module\ne21305e tests: dfu: img_util: Remove overlay from Kconfig files\n6fb7823 samples: mgmt: mcumgr: smp_svr: Remove overlay from Kconfig files\na60ed23 doc: Releases: Add notes about deprecated bt_ctlr_set_public_addr\nb07be64 Bluetooth: Controller: Deprecate bt_ctlr_set_public_addr\n6d77949 Bluetooth: GOEP: Fix L2CAP segmented RX data handling issue\n84c889e soc: ti: cc23x0: drop deprecated CONFIG_BUILD_NO_GAP_FILL option\n02ae404 dts: bindings: sensor: ti,ina226: Removed double enum value entry\n3261569 dfu: Allow to use imgtool-based headers\n14af165 soc: Move to the app-specific partitions\n1609f10 drivers: usb: udc: stm32: configure OTGFS/HS RxFIFO size using Kconfig\n6efa7f3 drivers: usb: udc: stm32: allow EP max packet size up to HW capabilities\nbbb8aba drivers: usb: udc: stm32: accept non-word-aligned MaxPacketSize or FIFOs\nac998f7 drivers: usb: udc: stm32: clean up handling of USB buffer table\n3788b2c drivers: usb: udc: stm32: turn EP0 max packet size into a constant\n9f4d477 west.yml: hal_stm32: Update dts/.../-pinctrl.dtsi\n60c3de2 bluetooth: host: remove useless internal flag BT_ADV_PERSIST\na1dd571 bluetooth: host: remove no longer used internal API bt_le_adv_resume()\n9b5ad2f bluetooth: host: do not attempt to resume terminated advertising sets\n731e581 bluetooth: host: do not resume periodic connectable advertisers\nb3a4ff0 bluetooth: host: do not use freed connection to resume advertising\n5762ff5 bluetooth: host: remove transitional option _BT_LE_ADV_OPT_ONE_TIME\ne24d3b9 bluetooth: host: remove transitional option _BT_LE_ADV_OPT_CONNECTABLE\n4850c0c bluetooth: host: remove API for automatic advertising resumption\n110f4ee tests: kernel: fix -Wformat errors\n7ea8b44 lwm2m: Add missing offset param to write_package_cb calls for SWMGMT\n0c21149 dts: stm32u5: disable otghs-phy by default\n7a41ed3 net: ipv6_nbr: Handle lifetime from RDNSS message\n975635f net: dns_resolve: Remove DNS server by specified address\nebe128e subsys/tracing: Remove retired k_pipe references in SYSVIEW config\na5b2d58 tests/kernel/mem_protect: Fix comment referencing old k_pipe api\n6563445 doc: Removing references to retired k_pipe api.\nd4afa19 Bluetooth: Host: Change WRN-\u003eDBG for not connect for TX\n97a3e9f Revert \"tests: subsys: pm: Use WUT as idle timer for MAX32655 boards\"\n85c0634 soc: adi: max32: Standby lock on boot.\nd24ab25 soc: adi: max32: Remove standby restore delay.\n5d11e40 soc: adi: sleep in idle mode.\n6571f4e kernel: work: work timeout handler uninitialized variables fix\ncbb9889 MAINTAINERS: Add tpambor as collaborator\n557489e doc: releases: migration: 4.3: Add shell_set_bypass update\n4fa4329 shell: Add user data argument to shell_set_bypass\n3d56c2f tests: boards: nrf: coresight_stm: Align test to STM driver\nc1a27a1 doc: release-note-4.3: Add video format estimation helper\n9c9e23d doc: migration-guide-4.3: Mention some changes in video structures\n517e13c drivers: video: st_mipid02: Drop caps\u0027 min_vbuf_count\nade4e05 drivers: video: Set format size\n21fec46 drivers: video: Add helper to estimate format size\nc07d182 scripts: ci: do_not_merge.py: labels starting with \u0027block:\u0027 mean DNM\n86ebdf8 scripts: Use different module IDs per runner module\n6b45182 drivers: i2c_rtio: max32: Fix variable naming in initialization macros\n6720613 doc: hardware: fix cache/guide.rst appearing in two different toctrees\n1d1bf21 audio: midi: do not cast into unsigned long in UMP_* macros\n169cf86 include: doc: fix bad @endcond markers\nc2384c5 wifi: esp32: simplify DHCP4 auto-negotiation Kconfig\n6430ad4 drivers: serial: increase FIFO threshold for BFLB uart driver\nb20d343 drivers: serial: Improve BFLB UART driver: add runtime configuration\na7bf03c drivers: serial: Add De-init to bflb uart driver\n317ae1c Revert \"soc: RT700 add custom MPU regions for non-cache memory\"\n5c8380d samples: video: tcpserversink: Add stm32n6570_dk as integration platform\nadb6e29 dts: arm: st: n6: add venc node\nfd1115d drivers: video: introduction of the stm32 venc driver\n53bcf31 dts-bindings: video: addition of stm32 venc description\na2baa09 doc: release-note-4.3: document size field added to video_format struct\nb69e1d5 include: video: add size field to video_format structure\n09ed77f include: driver: video: add h264 pixel format support\n1f1ea10 samples: tfm_regression_test: Add MAX32657EVKIT regression tests\n428279e cmake: define linker argument for undefined symbol\nd54d084 samples: basic: minimal: add no-sw-isr-table option\n1f294fe drivers: serial: nrfx_uarte: Default DIRECT_ISR if MULTITHREADING\u003dn\nad46777 tests: lib: json: Add test case test for encoded_obj array\ne4bd3cf lib: utils: json: Fix encoded_obj element size\n298ebb7 drivers: espi: npcx: add espi taf support for npck3\nee48cca drivers: espi: npcx: add espi support for npck3\n18423de drivers: espi: npcx: update OOB maximum payload size\n5549f5e drivers: espi: npcx: add support for SLP_LAN and SLP_WLAN VW signals\nc4aaf61 soc: nuvoton: npcx: update register name\naccd3df dts: espi: npcx: update device tree style\n9de7d61 modem: cmux: Implement DM and NSC responses\nf5dddbf soc: xlnx: zynqmp: enable RPU MPU by default\n0438b9f arch: arm: start threads on privileged stack\nb827253 doc: tf-m: fix link to documentation\n6a62950 dt-bindings: riscv: Add fine-grained IO memory PMP attributes\ne97d651 west.yml: Update hal_bouffalolab\n41db28e tracing: Remove superfluous inclusion of kernel.h\nfc05ff1 drv: ft8xx: refactor coprocessor driver\n22471f1 drivers: sensor: tdk: redefine trigger as ptr to make use of CONTAINER_OF\nd3e645e doc: release: Add a release entry\na855c61 scripts: Add __deprecated_version to the checkpatch checklist\n1f6bfff toolchain: iar: Add the __deprecated_version macro\n012b46b toolchain: gcc: Add the __deprecated_version macro\n98f8704 drivers: gpio: silabs: add lookup table documentation\nd58e6ef shell: mqtt: cancel disconnect work on connect event\nc2835ab drivers: adc: silabs: unify silabs adc kconfig\nee760b3 tests: adc: add configuration and overlay for DMA support on Silabs IADC\nbe9df47 drivers: adc: add DMA support for Silabs IADC\n93241cc samples/tests: adc: silabs: add multiple device overlays.\n8df78c0 samples: adc_sequence: differential mode handling in ADC conversion\n073745e samples: adc_sequence: add oversampling configuration option\n56198dd boards: silabs: add ADC io-channels on multiples boards\n4d3b459 drivers: adc: silabs: removed the old IADC driver\nf964ee4 dts: arm: silabs: update IADC driver binding for all series 2 board\n766dbf7 drivers: adc: add IADC support for silabs series 2 boards\nf954105 drivers: adc: enhance millivolt conversion with 64-bit support\n528e732 Bluetooth: Shell: BR: Add SDP discovery support for AVRCP CT/TG\nb6cf827 doc: Update CPU Frequency Scaling for SMP\n50f90d2 MAINTAINERS: Initialize entries for Performance States\nb24fa39 tests: samples: Extend cpu_freq tests and samples\nec9a7f8 cpu_freq: Add SMP support\n6136537 cpu_freq: Add new policy APIs\n63748db cpu_freq: Add default stub for cpu_freq_pstate_set()\n69d1f28 dts: bindings: Add generic P-state binding\n87570ba cpu_load: Make cpu_load_get() SMP safe\nea52403 cpu_freq: Update cpu_freq API documentation\n014a1e6 doc: Standardize on P-state\nac7799f tests: adc: enable adc_api tests for esp32\n4dd6976 tests: drivers: build_all: add st7567 mipi-dbi\n77c078b drivers: display: Update ST7567 to use MIPI-DBI\n9b26e96 Bluetooth: Controller: nRF54L: Fix to improve decryption speed\na5e1f59 Bluetooth: Controller: Revert relaxed radio packet assignment deadline\n1fe79a6 Bluetooth: Controller: Use CONFIG_SOC_COMPATIBLE_NRF5340_CPUNET\n233637f drivers: video: shell: fix control name lookup\ncc32112 tests: arch: commoon: stack_unwind: disable fpv_baser_aemv8r\n7d259c3 dts: arm: imx95: fix unit address and the first reg mismatch warning\nb8ae573 tests: arch: arm: fix -Wformat error\na1369d5 scripts: list_boards: drop HWMv1 code\nec59f15 scripts: west_commands: don\u0027t search for HWMv1 boards\n56843f8 samples/boards/nordic: align nrf54h20dk overlay\n230b74d boards/nordic/nrf54h20dk: Add button/LED aliases\n93464d0 arch: riscv: Use CONFIG_PMP_SLOTS for PMP array sizing\na2af19b bluetooth: hci: userchan: Improve RX allocation handling\n7f4f94e bluetooth: hci: Add data fields to event and meta event structs\n0a8a8a6 soc: nordic: nrf54h: Disable code relocation for MCUBOOT\neb5566d samples/subsys/instrumentation: add missing `sample.yaml`\n2093263 drivers: nrf: Add missing SoC header includes to adc and i2s\n9c49eaf doc: release-notes-4.3: Add entry about CoAP client payload callback\n85c49d8 net: coap_client: Document payload callback\ncea1651 samples: net: sockets: Add CoAP Upload sample\nfa22fa3 net: coap_client: Add optional payload callback for uploads\na6560c1 net: coap_client: Handle block size negotiation on upload\n74d715c pm: Remove \"power state consistency\" check\n371f30d dts: bindings: zephyr,power-state: Clarify min-residency-us\n37cc1ff samples: net: openthread: border_router: Enable OT network diagnostics\n1a7e0dc modules: openthread: Enable configuration for network diagnostics\n1476fcb Devicetree: remove deprecated ok state\n0d97390 tests: uart: async: esp32h2: Add config\n4c55e8f drivers: uart: esp32h2: Add ASYNC support\n293b16d west.yml: hal_espressif: Update for UART async\n0ab3085 modem: backends: isr: notify remaining RX bytes\n12d21df twister: scripts: add missing failure reason in Robot test runner\n1f35b83 doc: change \u0027defined be\u0027 to \u0027be defined\u0027\nc8d9103 soc: bflb: Enable bflb,l1c cache management for BL60x and BL70x\ne6ad1da drivers: cache: Introduce bflb L1C cache driver\n63a5205 dts: bflb: Add bflb,l1c to bl60x and bl70x\ndfd5a60 dts: cache: Add bflb,l1c binding\n3c1bb43 boards: adi: Enable hwinfo support for missed MAX32 boards\n1ec463e drivers: hwinfo: Memoize the USN fetched on MAX32\n91ab372 samples: i2s_codec: Refine sample for samll RAM platforms\n9fd1e28 boards: nxp: imx95_evk_15x15: flexcan2: add pinctrl node\n03d1054 boards: nxp: imx95_evk_15x15: add pinctrl for enetc_psi0\n20eac0e boards: nxp: imx95_evk: flexcan2: add pinctrl node\n1b53332 samples: i2s: output: add nucleo_l552ze_q\ne892deb drivers: i2s: stm32 sai add support for stm32l5xx series\n694459e dts: st: l5: add sai1 nodes\n49dedb0 dt-bindings: clock: add stm32l5_clock\nec4f8ac soc: renesas: Retrieve SYS_CLOCK_HW_CYCLES_PER_SEC from dts\n4009fb1 dts: renesas: Add Clock Control support for RZ/A3UL, V2L\nf85cedd drivers: clock control: Add Clock Control support for RZ/A3UL, V2L\n7ec5d95 manifest: Update commit id for hal_renesas\nffb91a2 drivers: sdmmc_stm32: Fix bus width initialization sequence\n57df5ab tests: build_all: display: Add st730x\nd6d21ec drivers: display: Introduce st730x display controller\nfa7f1b1 tests: llext: Improve compatibility with 64-bit platforms\nccd5112 tests: shell: Improve compatibility with 64-bit platforms\n4b306d2 MAINTANERS: Update hal_renesas collaborator\n0abb23f Bluetooth: ISO: rm extra log statements in chan_send\n55af38c samples: move pmci samples into samples/subsys/pmci\n4f3d385 soc: bflb: Enable xuantie arch support for bl61x\n1afca03 arch: riscv: Add support for Xuantie CPUs\n45d4d4f samples: Bluetooth: Fix BAP unicast client and server buffer counts\n7fd5dea Bluetooth: Controller: Cosmetic changes to Link Layer interface\n47e68be samples: video: tcpserversink: add stm32n6570_dk support\n9497b60 samples: video: tcpserversink: video compression support\naeb41fa samples: video: tcpserversink: N-buffering configuration\n92eaf08 samples: video: tcpserversink: sync with capture sample\nf40e031 samples: video: tcpserversink: change printk to LOG_\n2654845 snippets: stm32: addition of video-stm32-venc\n926aac9 doc: build: dts: api: document the zephyr,videoenc chosen node\n8e799c4 boards: intel: btl: Added revisions to support Hybrid and 12P\n750092d modules: mbedtls: Add security warning\n4040a1e drivers: modem: Extract common dts bindings\n8eae0bf Bluetooth: Controller: Fix single switch timer use in ISO Sync\n60058d7 boards: disco_l475_iot1 update openocd.cfg\nce1235d tests: drivers: build_all: cover uc8151d\n5b595e3 drivers: display: uc8151d: Add UC8151D display controller support\n5a70c3d soc: silabs: siwx91x: enable BLE stack bypass for host-driven operation\n6467e99 boards: arm: max32: enable mpu by default on MAX32xxx boards.\ne46510b ci: doc: bump sphinx-sitemap in /doc in the doc-deps group\n472c29a ci: github: bump the actions-deps group with 4 updates\ndba0a28 samples: subsys: usb: midi: fix compilation warning\nf7ccc6b lib: midi2: fix const-incorrect ump_stream_responder_cfg\n8d202cb doc: coding style: Introduce a naming conventions section\ne8c6695 drivers: adc: esp32: split adc_esp32.c between 2 files\na96e18d drivers: adc: esp32: enable adc dma on non gdma socs\naa5b476 drivers: timer: nrf_grtc_timer: use a function for cc enable check\nb24f3f3 boards: nxp: mcxw23: Add support for BLE apps\n4d90bca soc: nxp: mcxw: Add BLE support to MCXW2XX soc\n7f621c4 soc: nxp: mcxw: Isolate MCXW7xx-specific config from MCXW2xx\n4bffa64 dts: arm: nxp: mcxw23x: Add BLE dts information\n2ac238c drivers: sensor: ds18b20: Fix temperature calculation for ds18s20\nf56f196 drivers: uart_mcux_lpuart: Handle multiple uart case\n6ca6037 boards: adi: max32675evkit: Enable watchdog support\n5d15574 boards: adi: max32680evkit: Enable RTC counter support\n63194b8 MAINTAINERS: Add myself as Renesas RZ Platforms collaborator\n3168f06 drivers: rtc: rv3032: fix clang error label followed by a declaration\n3d5e9cd board: Add \u0027egis_et171\u0027 dev board\n83afba8 driver: Reuse andes_cache driver for compatible MCUs\n9cde077 soc: Add Egis et171\n8760db3 drivers: flash: flexspi_mx25um51345g: fix erase chip lut entry\n6a714d5 drivers: flash: flexspi_mx25um51345g: get max speed from dts\ne774d82 drivers: flash: flexspi_mx25um51345g: fix DDR dummy cycles\n424459d tests: drivers: flash: Fix fixture assignment for the supply-gpios test\n2eff0fd audio: dmic: Uniform indentation\n45aea48 boards: st: nucleo_l552ze_q: correct ns variant RAM info\nc5bacb3 boards: st: nucleo_l552ze_q: remove ns variant useless configuration\na69ed69 boards: st: b_u585i_iot02a: correct ns variant RAM info\n31aea40 boards: st: b_u585_iot02a: remove ns variant useless configuration\n9f65833 boards: st: b_u585_iot02a: correct ns variant YAML flash size tag\n4c77ea9 boards: st: stm32l562e_dk: correct ns variant RAM info\n3529306 boards: st: stm32l562e_dk: remove ns variant useless configuration\n76fcbe2 boards: st: stm32l562e_dk: correct ns variant YAML flash size tag\n0255129 tests: kernel: device: add missing node in hifive board overlays\na360cca dts: arm: st: u5: add st,stm32-qdec child nodes (disabled)\nddb3b76 dts: arm: st: l5: add st,stm32-qdec child nodes (disabled)\n9b9033a dts: arm: st: l4: add st,stm32-qdec child nodes (disabled)\n615554c dts: arm: st: l1: add st,stm32-qdec child nodes (disabled)\n9ba0694 dts: arm: st: l0: add st,stm32-qdec child node (disabled)\n3a5b7e5 dts: arm: st: h7: add st,stm32-qdec child nodes (disabled)\n7a92818 dts: arm: st: g4: add st,stm32-qdec child nodes (disabled)\n0f325c8 dts: arm: st: g0: add st,stm32-qdec child nodes (disabled)\n5df57ff dts: arm: st: f7: add st,stm32-qdec child nodes (disabled)\n3281e77 dts: arm: st: f4: clean QDEC node properties\nbfbb0c6 dts: arm: st: f3: add st,stm32-qdec child node (disabled)\n61f9837 dts: arm: st: f2: clean QDEC node properties\n784a8cb dts: arm: st: f1: add st,stm32-qdec child nodes (disabled)\n8fb6ea2 tests: mbox: Add support for nRF54LM20A\n8c13c07 tests: bluetooth: tester: Fix extra newline in logs\ne0a9a16 tests: drivers: uart: uart_async_api: Enable test on nrf54h20 PPR XIP\nafc6552 retention: remove unused API struct\n1e436f4 tests: Bluetooth: PACS: Modify unittests to native_sim\naf00bc5 tests: Bluetooth: Codec: Modify unittests to native_sim\n1384818 boards: shields: add Mikroe RTC 18 Click shield\n15d398d tests: rtc: add microcrystal,rv3032 to build_all test suite\n5a01837 drivers: rtc: microcrystal rv3032 driver introduced\n494d443 dts: bindings: microcrystal,rv3032 binding introduced\nb5c7a67 drivers: i3c: stm32: Fix issue with DAA command\na50dc9f boards: nordic: nrf54h20dk: ETM in JLinkScript\n0b5bb3c snippets: nordic-log-stm-tpiu-dict: Added\n24353a8 drivers: misc: nordic_vpr_launcher: Init order\n02fb6fa snippets: nordic-log-stm: Updated for coresight\n6066a42 drivers: debub: coresight: Added coresight_nrf\n85363f9 drivers: pinctrl_nrf: Add coresight tpiu pins\n925451e doc: migration-guide: Moved nrf_etr\nd833556 drivers: debug: Moved nrf_etr from misc\n7a1e82a boards: qemu/xtensa: ignore FPU and SMP testing tags\nadba712 boards: arduino: use common usb_cdc_acm serial on all STM32H747 boards\nbc2c089 samples: drivers: adc: enhance test scenarios filtering\nbf34921 tests: drivers: adc: enhance test scenarios filtering\nfed89a0 scripts: pylib: twister: expr_parser: add dt_node_has_prop expression\nd93b59b openthread: platform: radio_spinel: Spinel variables on global memory\n0154240 scripts: utils: migrate_mcumgr_kconfigs: Remove old Kconfigs\ne9a6799 drivers: i2c: minor update to Infineon driver\n35a4613 tests: Bluetooth: Controller: Fix bad string formats\n4b9bc7d Bluetooth: Controller: Fix return types for ll_length\nf8f87c0 boards: nrf9280pdk: Fix LED pins for rev. 0.2.0 with IronSide\n863a766 drivers: adc: ad599x: Fix async logic error and driver breakdown\nd9a691c tests: Bluetooth: BAP: Modify BASE unittests to native_sim\n7781f95 samples: subsys: mgmt: mcumgr: smp-svr: Enable for BeagleConnect Freedom\nffb132e boards: nuvoton: numaker: Guide VS Code pack in doc\n98917a0 tracing: Remove retired k_pipe tracing api\n6deb989 boards: renesas: ek_ra8p1: enable ArduCam CU450 OV5640 shield\n710b460 boards: shields: add ArduCam CU450 OV5640 DVP shield\nfa8ea53 dts: bindings: gpio: add ArduCam FFC-40 pin connector binding\n3813919 dts: renesas: add CEU node for RA8P1 SoCs\nca48a14 boards: arduino: use shared QSPI partition configs\n3c50822 samples: net: midi2: new sample\n38b1a9c boards: shields: olimex_shield_midi: new shield\nb0fa1be net: lib: midi2: new Network MIDI 2.0 host stack\nb1d6252 samples: subsys: usb: midi: demonstrate usage of UMP Stream responder\n5d71669 usb: device_next: usbd_midi: mark UMP group as 31.25kb/s from devicetree\n5e83d22 lib: midi2: new UMP Stream responder library\n4b04b74 audio: midi: improve API documentation\nf5e70d5 fs: ext2: Explicit int cast ret assignment in ext2_init_storage\n9ada047 boards: st: nucleo_c071rb: Add pull-up to user button\ncc90cfe tests: logging: Improve compatibility with 64-bit platforms\ncea6bc4 tests: drivers: uart: Improve compatibility with 64-bit platforms\nfeb3d54 tests: drivers: flash: Improve compatibility with 64-bit platforms\nc78e45a drivers: counter/lptmr: Enable lptmr get_freq feature\ne3c8230 soc: silabs: siwx91x: Add firmware version check of NWP\n972d5e3 Revert \"tests native_sim reset_hw_info: Skip by now\"\n320496d boards native_sim: reboot: Do not close descriptors manually\n06f9155 drivers: i3c: dw: fix bus free timing for pure bus\n65bf8f9 drivers: video: ctrls: correct assertion in video_cluster_ctrl\n6f431a4 drivers: video: ov5640: support DVP bus-width and data-shift from DTS\n804f893 drivers: video: ov5640: Use CCI API helpers for register access\nea1a839 soc: intel: common: Replace printk with LOG_ERR\n709f453 drivers: gpio: Enable support for latest GINF method\n69826c5 lib: acpi: Enable support for ACPI_RESOURCE_TYPE_ADDRESS64\n4b71cf9 lib: smf: add API to get the current leaf and executing state\naf6f88b lib: smf: add const qualifier to ctx arg\nec049bd doc: update migration guide for Nordic comparator changes\n6d7f429 tests: comparator: nordic: Align boards overlays for changed input types\ne5ecbd2 drivers comparator: nordic: Align drivers to changed analog input types\nd85bdb7 dts: bindings: comparator: nordic: Change inputs type to int\n7ee9ee8 soc: renesas: Retrieve SYS_CLOCK_HW_CYCLES_PER_SEC from dts\n2d87535 dts: renesas: Add Clock Control support for RZ/N2L, T2M\n77c1aed drivers: clock control: Add Clock Control support for RZ/N2L, T2M\n5197129 manifest: Update commit id for hal_renesas\n08e26c1 tests: build_all: Add ssd1357 build test\na9b9416 drivers: display: Introduce SSD1357\n7c47371 samples: display: add stm32h7s78_dk board dedicated conf\ndce6752 boards: st: enable ltdc/display in stm32h7s78_dk\n0cbe3c6 boards: st: stm32h7s78_dk: enable MEMC \u0026 SMH for display\n7610d21 dts: arm: st: add ltdc node into stm32h7rs.dtsi\n3226cf5 soc: stm32: stm32h7rsx: add MPU region #0 disabling all accesses\n866dff0 drivers: flash: stm32g0: Implement set|get_rdp_level API\nfaf661e drivers: flash: stm32g0: Implement option_bytes_write|read API\n50ac559 drivers: wifi: Add WLAN wakeup for MIMXRT1060-EVK\nbf82f7f copyrights: fix copyright line\ne5838ff dts: arm: adi: Proper MAX32690 sram7 size\n31a94a8 dts: arm: adi: Proper MAX32690 flash1 settings\n2140b55 Bluetooth: BAP: Shell: 0-init some global variables\n5bf4af9 doc: develop: manifests: external: add mender-mcu\n58a7119 mgmt: ec_host_cmd: usb: fix double free\n6fd7280 net: openthread: Expand OpenThread features\nea072d3 drivers/sensor/: lis2dux12/lsm6dsv16x: use helpers\n2a1444e modules: mcuboot: Fix missing chosen node lookup\n491498a boards: nordic: nrf54lm20dk: remove support for wdt from flpr\n655abd8 tests: modem: chat: test `modem_chat_is_running`\n83375a8 modem: chat: add `modem_chat_is_running`\n9d5f94f soc: ironside: add min and max values for update\n93bc73a docs: releases: migration: 4.3: Add note on OS mgmt info change\n9002db0 tests: mgmt: mcumgr: os_mgmt_info: Update to use board target\nb2884ff mgmt: mcumgr: grp: os_mgmt: Use board target for hardware platform\n0520dfe Bluetooth: Tester: Fixed read_multiple_var\neb931d4 kernel/Kconfig.init: update description of SOC_RESET_HOOK\n418eed0 arch/arm: introduce the pre-stack/RAM init hook\n3d12e18 tests: arch: arm: irq_vector_table: don\u0027t printk from ISRs\n66998ef west.yml: update hal_stm32 revision for LL lib url update\nc64fc89 tests: drivers: counter: esp32: Add RTC counter support\n674fd64 tests: drivers: counter: Configurable ticks tolerance\n1d2f012 drivers: counter: rtc: esp32: Add LP TIMER support\n01d4308 drivers: counter: rtc: esp32: Fix cancel alarm condition\n1663233 drivers: counter: rtc: esp32: Fix overflow case\na71f2ba dts: bindings: counter: esp32: Fix compatible name\n35909d7 Bluetooth: CAP: Mark err used for assert as __maybe_unused\nf6905b7 tests: Bluetooth: Shell: Add bluetooth.shell.audio.no_assert\n5fa605a drivers: modem: cellular: nRF91: Remove periodic chat script\n637e07d test: rtc: add nxp,pcf85063a to build_all test suite\nbae6e35 drivers: rtc: Add nxp,pcf85063a driver\nd1493b6 driver: i2s: fix nxp i2s fifo combine values\nf430d38 doc: releases: 4.3: Add CoAP client callback data migration and notes\n6a4b5cd net: lib: coap: Add packet pointer to client response callback data\ncbef867 net: lib: coap: Convert client response callback arguments to struct\nc0a421c drivers: i2c_dw: Avoid spamming NACK error messages\n1f3ce81 bluetooth: controller: ll_sw: nordic: constant latency req\n75cb327 samples: nordic: nrf_sys_event: test `SOC_NRF_FORCE_CONSTLAT`\n169957f soc: nordic: common: `CONFIG_SOC_NRF_FORCE_CONSTLAT`\nadecb09 modem: select `UART_USE_RUNTIME_CONFIGURE`\n2bfd764 net: ip: account for the size in the inet_ntop code path\na8aa8af net: dns: fix the inet_ntop buffer size mismatch with a sizeof\n1a5bef6 tests: flash: Fix disable_spi_nor case\n66a0f82 tests: drivers: comparator: stm32 comparator support\n7eb3b41 drivers: comparator: implement stm32 comparator driver\n5c9a2de dts: arm: st: add comparator to h7 and g4\nf5270c5 dts: bindings: comparator: add STM32 COMP device driver\ne361323 samples: subsys: Fix ESP32 SoCs support\n9ae10ea boards: frdm_imx93: enable watchdog on the board\nee28ac2 boards: imx93_evk: enable watchdog on the board\ndc1dffb dts: arm64: imx93: add watchdog device nodes\n8e0486d drivers: watchdog: wdog32: add imx9352 support\n9f6a745 drivers: watchdog: wdog32: add MMIO mapping support\n708ffa3 modules: hal_nxp: disable quick access\n11a2ec4 west.yml: depend on hal_nxp pr 605\n9f382d6 boards: mimxrt700_evk: Make linkserver the default runner\nc123d98 include: kernel: doc: improve slab API \"isr-ok\" documentation\n0a7d6bc doc: releases: Add note about CONFIG_BT_BUF_ACL_RX_COUNT\n6c870b0 Bluetooth: Remove CONFIG_BT_BUF_ACL_RX_COUNT\ne7c8ecf shields: arduino: Add support for Arduino Modulino Thermo\n9b25d8a tests: mem_protect/mem_map: remove intel_adsp test case\n35b26e9 tests: mem_protect/mem_map: fix mapped code execution test\na9849a7 soc: intel_adsp/ace: add snippets-text-sections.ld\n36413cd arm: linker: add snippets-text-sections.ld to cortex_a_r, arm64\n55a9048 x86: linker: add snippets-text-sections.ld\ne8a66d5 linker: add a way to add snippets to text section\n98168eb shields: arduino: Add support for Arduino Modulino Movement\nc8e22ec tests: posix: signals: adjust expectations for real-time signals\n6862856 west.yml: espressif: use Zephyr utils for MIN/MAX\nca85e76 MAINTAINERS: Add self as collaborator\nbe0e983 drivers: sensor: st: lis2du12: add SENSOR_TRIG_DELTA support\n58b2153 MAINTAINERS: Add area for NVMEM\n44158c4 doc: releases: 4.3: Add NVMEM entry\nc8477e3 doc: services: Add NVMEM subsystem\n6c83f86 tests: lib: devicetree: api: Add NVMEM test cases\n3577eed tests: nvmem: api: Add test suite for NVMEM API\n05a6050 nvmem: Introduce new subsystem for Non-Volatile Memory layer\n5d49dcc dts: bindings: nvmem: Add fixed-layout\nf4b3d39 devicetree: Add nvmem-consumer\nf460b59 boards: stm32n6570_dk: Configure i3c1\n9ed3ead dts: arm: stm32n6: Add i3c nodes\n482d183 tests: Update smp test to support 12 CPUs\ndaab73d MAINTAINERS: add Instrumentation Subsystem\nf5a349f scripts: move zaru.py to a separate directory\n8f60b74 boards: aesc: ElemRV-N: Add GPIO Controller\n15aa152 dts: riscv: aesc: elemrv-n: Add GPIO Controller\n15d2990 drivers: gpio: Add driver for Aesc Silicon\n8cd010b drivers: mbox: imx_mu: return early in ISR when done\n13e0588 drivers: mbox: imx_mu: change order of interrupt handling\n3c80b15 drivers: mbox: imx_mu: handle all interrupts for a channel\n593e2b5 drivers: mbox: imx_mu: Remove extra interrupt handler layer\n04778ff drivers: mbox: imx_mu: ignore TriggerInterrupt failures\nb365311 boards: espressif: esp32s3_mini_n8: fix psram size\nf796999 boards: add WeAct Studio ESP32-S3-B board support\n5a588f1 tests: boards: nrf: dmm: Skip stress test for empty memory region\n92d5b46 soc: nordic: common: dmm: Fix allocation algorithm\n60af28e drivers: timer: nrf_grtc: Move GRTC initialization to early init\n7faf692 manifest: Update hal_silabs to include wiseconnect 3.5.2\n9de8947 native_simulator: Get latest from upstream\nf289613 net_buf: do not assert on buffer reset when flags are set\n6685acc tests: modem: modem_chat: test dedicated workqueue\n761961f modem: optional dedicated workqueue\nb3ef646 doc: releases: Add note for bt_le_set_auto_conn\n360880b Bluetooth: Host: Remove bt_le_set_auto_conn\n47a7038 samples: esp32: deep_sleep: Internal pull support\n73e882f soc: esp32h2: Fix LP SRAM size\nbbc5a83 soc: esp32h2: Power management support\n1f91cfe dts: pm: esp32h2: Add power states\nda21bee west.yml: hal_espressif: Update for ESP32-H2 pm support\n7c1721d tests: boot: Fix bootloader.mcuboot boot loop for nrf platforms\n79bfd95 drivers: sdhc: mcux_sdif: report 4 bit bus support\n1264a92 net: mqtt_sn: udp: Adapt to new zsock_recvfrom() api.\n37ff1b2 tracing: ctf: Fix arguments socket tracing functions\n65e099b tests: net: socket: udp: Fix type of pointer\n61e12a4 drivers: wifi: eswifi: Fix callback prototype\nd4094d4 net: dns: dispatcher: Fix type of pointer\n16f4d6c tests: net: ipv6: Fix printf modifier\nffb1e63 tests: net: socketpair: Fix zassert_not_equal call\n96dff2f tests: net: dhcpv6: Fix zassert_ok check\ne0c74b2 doc: migration-guide: Mention socklen_t changes\nc546c1c net: socket: Change socklen_t to be 4 bytes long\nb28b570 soc: nordic: uicr: fix SPIM CSN CTRLSEL values\nf047a41 modem: cmux: auto calculate work buffer sizes\n4b39be6 cellular: extend registration status definitions\ne15a65c cellular: update access technologies\nbc12672 tests: stepper: deprecate drv84xx_api test suite\n215df9f tests: stepper_api: check is_moving in stepper_api tests\n5117b77 tests: drv84xx: drop duplicate tests\nee909ef tests: stepper_api: drop test_run_zero_step_interval_correct_position\n7b3ac52 doc: releases: 4.3: add formatting options for log backend\nf7412dc logging: allow simplified logging of backend\n345121a systemview: Systemview section move to .dtcm_bss\n69548c6 documentation: unit tests: extend description\n6693923 net: wifi: mgmt: Remove extraneous newlines from logs\nce45f4c net: lib: wifi: mgmt: Fix memory leaks\n7eba25f include: zephyr: toolchain: Introduce macros to ignore -Wcast-qual\n730efd9 MAINTAINERS: Add one collaborator for Bluetooth Classic\ncaead9f tests: drivers: Add PTL-h overlays to support two applications\ne200719 dts: x86: intel: panther_lake: Update RTC to support MFD method\n5d02fac samples: instrumentation: Add a sample for instrumentation subsys\n9f402bd scripts: zaru: Add instrumentation CLI tool\nd569a17 cmake: emu: Allow QEMU to serve serial on a TCP/IP port\n139407f instrumentation: Add instrumentation subsystem\n217bb19 toolchain: gcc: Add __no_instrumentation__ definition\n03fcfcd cmake: compiler: Add func_instrumentation flag\n9005f86 arch: arm: aarch32: Refresh CORTEX_M_DWT in menuconfig\nd185f8e testsuite: optional limiting of coverage dumps\n1beee4f tests: ram_context_for_isr: exclude frdm_k32l2b3/k32l2b31a.\nf53ab27 scripts: set_assignee: add tests as a meta area\ne9abaf4 scripts: compliance: Add basic cmake style checks\n28ac3b5 ci: set two more ccache-cache-key false flags\n4ef1163 samples: tracing: fix missing k_event funcs for UART test\nea499ca sys: cbprintf: logging: fix equivalent branches in argify macro\n4ba658d west.yml: Update west to point to the recent changes for hal_stm32\n20a1ea7 boards: st: nucleo_wb09ke: Optimize power consumption\n51fc440 drivers: bluetooth: hci: Add PM support to the STM32WB0x HCI driver\ne4a8b27 drivers: serial: Enable UART wake-up line in STM32\n85318a9 soc: st: stm32: Provide PM support for STM32WB0x\nbdb41c0 drivers: timer: Enable STM32WB0_RADIO_TIMER Kconfig parameter\n84f7098 drivers: timer: Provide radio timer driver for STM32WB0x SoCs\nf965565 drivers: Fix the improper use of CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC\n8f34d0f boards: seeed: xiao_nrf54l15: enable ceramic antenna\n2d1cfe8 include: util: Applied clang-formatting\nd906376 sys: util: add Z_INTERNAL_MAX and Z_INTERNAL_MIN\n7e0d8f9 sys: util: add min3 and max3 single evaluation macros\nc576b09 sys: util: add support for nested min/max\n37717b2 sys: util: rename Z_MIN Z_MAX Z_CLAMP to min max and clamp\n056f3b0 west.yml: update few modules to pickup min/max define guards\n25578a0 sys: util: move Z_MIN, Z_MAX, Z_CLAMP into util.h\na0b6ec6 modules: hal_silabs: Add shim for sl_memory_manager_pool APIs\n0dddf35 drivers: mfd: axp192 fix EXTEN switch control  value\n3165d3c ci: github: bump the actions-deps group with 2 updates\n02c1293 soc: st: st: h7: Add missing definition for STM32H742xx\n86a63fa tests: build_all: led_strip: split uart test case\nb966871 driver: led_strip: do not set uart supported\nccef0cf drivers: pinctrl: nrf: use HAL defines\nf5a783c net: mqtt: Remove misleading comment\ne09a13d dts: arm: silabs: Clean up xg22 dts files\n0ee07b4 dts: arm: silabs: Clean up xg23 dts files\n3ee0de4 dts: arm: silabs: Clean up xg24 dts files\n9d199d8 dts: arm: silabs: Clean up xg28 dts files\nb4491eb dts: arm: silabs: Clean up xg29 dts files\n33a7b65 scripts: ci: check_compliance: use correct error when author didn\u0027t sign\n82fd615 scripts: ci: check_compliance: fix potential unbound variable access\n5454543 drivers: sai: Fix compile time error with clang\nabd0919 samples: modules: lvgl: demos: Increase memory pool on native\ne05a272 samples: modules: lvgl: demos: Increase main stack to fix crash\n0907a05 scripts: dts: fix CMake DT API helper for compatible properties\ne88be20 sd: sdmmc: only with to 4 bit, if supported by host\ncd2a38c logging: Fixes #96880\n6a3ccab linker: nxp: imxrt6xx: hifi4: add missing include\n590b6ae boards: st: nucleo_g431kb: fix lptim1 domain clock\ne9e6b81 doc: fix peripheral to peripheral_hr\nc44cb73 ci: Switch to CI image v0.28.6\n3d7aa4a ci: errno: use action-zephyr-setup action\n36bc2f3 ci: Switch to CI image v0.28.5\n9a440ec drivers: bluetooth: hci: Introduce bt_spi_close to support bt_disable\n27b0e47 drivers: hwspinlock: sqn: add reg-width dts property\n2c86e65 drivers: hwspinlock: sqn: use cluster id instead of core mpidr\nddc3779 doc: peripherals: add hwspinlock documentation\n7678c85 drivers: hwspinlock: update default init priority\n176e2a4 drivers: hwspinlock: add zephyr spinlock per hwspinlock\n36e5672 devicetree: add hwspinlock helpers\n8f83b38 dts: bindings: add hwspinlock common bindings\n403b4ef drivers: hwspinlock: remove syscall support\n3cd292a west.yml: MCUboot synchronization from upstream\n53b67d6 modules: mcuboot: Add Kconfig option for BOOT_MAX_ALIGN\n6664958 drivers: flash: npcx: support GDMA operation for NPCXn and NPCKn\nc6b2d00 boards: nuvoton: npck3m8k_evb: remove QSPI flash configuration\n3cb6ff5 dts: nuvoton: npcx: add support for GDMA and driver enable options\n97d8aa3 soc: npcx: update npck register structure checks for consistency\nf0c6168 tests: Bluetooth: CAP: Update unicast audio start unittests\n5d8170b Bluetooth: BAP: Add conn check assert in bt_bap_iso_bind_ep\n1dc98dd Bluetooth: BAP: Add check to verify that eps have correct iso\n4f2ef51 Bluetooth: BAP: UC: Move iso_bind_ep to config instead of QoS\n50eb0fb drivers: gpio: renesas: Fix fail case pin_get_config\n03897f8 boards: nxp: add imx91_qsb support\na3e9b59 drivers: pinctrl_imx: add mimx9111 support\nd84317f drivers: clock: ccm_rev2: add mimx9111 support\n531ea30 soc: nxp: imx91: add MIMX9111 support\n801690d west.yml: depends on hal_nxp PR\nb88e615 sysbuild: support application CMakePresets.json files with sysbuild\n98c92d3 soc: st: stm32u0: enable flash instruction cache\nb564878 soc: st: stm32: use CONFIG_STM32_FLASH_PREFETCH where applicable\n7c47bc9 soc: st: stm32u3: add flash prefetch\ne29c414 drivers: rtc: modify Nuvoton numaker driver for compatibility\ncbe94ca scripts: twister: coverage: do not fail when suspicious_hits are detected.\nb7a7314 manifest: Move to latest hal_adi\nb5177b1 modem: modem_cellular: assert reset pin for duration\n54088f6 modem: modem_cellular: prioritise reset pin on failure\n131bec5 modem: modem_cellular: delay after reset de-assert\n0ba20dd modem: modem_cellular: revert baudrate on reset\ne662d77 cmake: add net_socket_service_desc to common-rom.cmake\nc0c3fee boards: st: stm32n6 boards: Add netif:eth twister support\n47ed50c drivers: ethernet: stm32n6: Use zephyr symbol for alignment attribute\n36192a4 drivers: ethernet: stm32n6: Remove attributes from extern definitions\n4a875c0 drivers: ethernet: stm32n6: Fix phy modes declarations\n727c15a doc: release notes: add LVGL zephyr regions options\nfebf4e8 shell: fix app version sub commands\n896bdce subsys/tracing/tracing_backend_posix: Set file to be closed on exec\nd83ebce drivers/serial/uart_native_tty: Set TTY to be closed on exec\n07987cc drivers/serial/uart_native_pty: Set PTY to be closed on exec\nb850715 drivers/net/nsos: Set socket to be closed on exec\n19b181e drivers/input/linux_evdev: Close input file on exec\ne5d6e0c drivers flash_simulator_native: Set flash file to close on exec\n9f00584 drivers eth_native_tap: Set socket to be closed on exec\nd91565c drivers eeprom_simulator_native: Set EEPROM file to close on exec\n01118e2 drivers can_native_linux: Set socket to be closed on exec\na8f10c9 docs native_sim: Fix drivers table entry for hwinfo\n7c1193c udc_dwc2: fix off-by-one in TX FIFO unset check\n30092cf drivers: virtio: virtio_pci: fix virtqueue overallocation\na0dbd67 fs: virtiofs: fix off-by-one in virtqueue initialization\nd76e000 drivers: pwm: stm32: kconfig: remove ll_tim selection\n1d2029a drivers: counter: stm32: kconfig: remove ll_tim selection\na02e1c7 drivers: counter: stm32: rtc: remove init struct\nbb2eb4e drivers: rtc: stm32: remove calls from ll source file\nddb9e3f cmake: use zephyr_file_copy(...) instead of file(COPY_FILE ...)\n78b8950 net: http_server: Fix crash when cb refuses new websocket connection\nd6e940e dts: vendor: nordic: nrf54h: move adc and comp to gdpwr_slow_main\n5fd26a6 drivers: adc: nrfx_saadc: implement PM device runtime\ne5c37d4 littlefs: boards: delete frdm_mcxa156 configuration\n92d06ac soc: nxp: imx: add resource table section for Cortex-A\na00577c samples: net: wifi: nxp: fix PEAP-TLS connection failure\nf7dfcfb spi: lpspi: Add include guards to common header file\n97eb3eb spi: lpspi: Extract FIFO length query helpers to common header file\ndf7b1a1 spi: lpspi: rtio: Re-introduce native RTIO support\n9304035 net: bridge: support DSA port\n98a20b2 ci: set various ccache-cache-key parameters for the setup action\nb27ab80 modbus: support UART ASYNC API in modbus serial\nc77e5a6 soc: nordic: common: mram_latency: Fix returning uninitialized value\n9985a09 bluetooth: hci: userchan: Implement close callback\ndcc61ae drivers: clock_control: Set maximum frequencies for CONFIG_SOC_STM32H742XX\n804134f soc: nordic: nrf54h: increase default log stack size if CONFIG_PM\u003dy\nf53c283 opamp: introduce new mode\n783d4a1 opamp: adjust modes enum to avoid clash with STM32 HAL macros\n181082e drivers: i2s: i2s_ll_stm32: add support for IO swap\nefe5a30 samples: fs_sample: add native_sim board support\nc457eba boards: st: Set csbounds explicitly instead of relying on default value\nd1ea753 drivers: memc: stm32_ospi_psram: make NCS boundary configurable in dt\n1e966ba drivers: memc: stm32_xspi_psram: make NCS boundary configurable in dt\n53f91ea drivers: spi: spi_ll_stm32: add support for IO swap\ne7aa49c drivers: video: dcmi: correct clock_control_subsys_t cast\nc3995b6 drivers: usb: udc: stm32: avoid unnecessary clock_control_subsys_t cast\n00fd580 drivers: mbox: stm32-hsem: correct clock_control_subsys_t cast\nc927d9e video: stm32: dcmipp: correct clock_control_subsys_t cast\n8fa7cbc samples: i2s: output: add nucleo_g431kb\n5a0d4e1 drivers: i2s: stm32_sai: add support for stm32g4xx series\n4dced47 dts: st: g4: add sai node for stm32g4xx\nf042a1c drivers: spi: mchp_mss: Avoid sending extra bytes\na522062 drivers: spi: mchp_mss: Handle NULL buffers better\nb398769 drivers: spi: mchp_mss: Make more universal\n9ee617a soc: silabs: siwx91x: Expose firmware upgrade API\nb781386 soc: silabs: siwx91x: Implement sys_reset()\n3fd5cc0 manifest: Update hal_silabs\nace1371 samples: tflite_ethosu: support numaker_m55m1\n9f58227 samples: tflite_ethosu: fix unsafe thread stack allocation\ndd9eb37 include: arch: arm: cortex_m: Move ITCM before .text\nc63ec6b tests: Bluetooth: Audio: Fix uninitalized value\n5eed3a9 drivers: sensor: explorir_m: fix variable mix-up\ne3a3fca boards: nordic: nrf54h20dk: fix flashing for xip variants\n9041793 Revert \"ztest: Add validation of zassert strings\"\n2d72d86 serial: rts5912: implement power management\n3372459 serial: uart_ns16550: add uart_ns16550_get_port() function\n5bca309 gpio: rts5912: implement power management\n75c4be1 soc: realtek: ec: Implement power saving\n83e350b sensor: rts5912: reduce Tachometer wake up frequency\ne213815 tests: ram_context_for_isr: fix format specifier for addresses\n5b01615 tests: zdsp: Correct format specifier in assert_strings\nef73155 ztest: Add validation of zassert strings\ne3c5bdf boards: Add secondary_app_partition alias\nf89c004 soc: raspberrypi: rpi_pico: Add RP2 bootloader support\n6c01157 kernel: dynamic: update storage size for pool of dynamic thread stacks\n4c221ac drivers: disk: sdmmc_stm32: fix compilation error for SDMMC_STM32_EMMC\nf07f0d2 net: mqtt_sn: Implement updating will topic and message\nd4fddc2 shields: st_stm32f4dis_cam: add a stm32h747i_disco//m7 overlay\n04c1bf6 shields: weact_ov2640_cam_module: use MCO macro from stm32 bindings\n23bb046 shields: st_stm32f4dis_cam: add stm32l4r9i_disco specific overlay\nc4285ef shields: st_b_cams_omv_mb1683: remove i2c/dcmi/dmamux nodes from overlay\n5006c83 boards: st: stm32h7b3i_dk: add dcmi pinctrl and remove duplicated i2c4\n2c131a6 boards: st: stm32h747i_disco: add camera support\nc2da6de include: zephyr: dt-bindings: clock: h7: add MCO SEL/PRE macros\n6b13cc8 include: zephyr: dt-bindings: clock: l4: add MCO SEL/PRE macros\ne944957 dma: stm32: removal of unused stm32_dma_config_channel_function\na09fc06 dma: stm32: dma_stm32_slot_to_channel is only applicable on STM32Fx\n002d954 dts: st: l4: fix dcmi dma stream id\nc6bbf4d tests: counter: Handle zero tick_us for very short timer ticks\n34d863a samples: drivers: counter: Add Counter support for Renesas RZ/V2L, A3UL\n2854797 tests: drivers: counter: Add Counter support for Renesas RZ/V2L, A3UL\n05fd05d boards: renesas: Add Counter support for Renesas RZ/V2L, A3UL\n34d764e dts: renesas: Add Counter support for Renesas RZ/V2L, A3UL\n424a124 drivers: counter: Add Counter support for Renesas RZV2L, A3UL\n0ab4091 drivers: i2c_sedi: add API to retrieve current configuration\n0a9c763 ci: workflows: doc: use self-hosted runner\nfea720c doc: requirements: regen pinned dependencies\n27330f6 scripts: requirements-actions: regen pinned dependencies\nbbe4a06 tests: drivers: build_all: sensor: add omron d6f\n29d0173 drivers: sensor: omron: add d6f driver\n5001535 dts: bindings: vendor-prefixes: Add omron prefix\nf8a952f include: drivers: sensor: add flow rate channel\ne8e4d21 mcux: wifi_nxp: Enable IMU IRQ after event initialized\n4925e3a drivers: sensor: voltage_divider: Use k_timepoint_t for absolute time\nb4d5cd3 tests: drivers: pwm: pwm_api: Add Kconfig options for test values\n3855d18 tests: drivers: pwm: pwm_api: Add pwm-test alias for pwm device node\na6500f1 drivers: sensor: voltage-divider: Add skip-calibration property\n0025751 modem: cmux: Rework the drop handling\n2d151b2 lib: smf: remove unreachable case in get_lca_of()\nca641d8 llext: only build fs_loader.c if file-systems are enabled\n7a6c7ea drivers: serial: nrfx_uarte: Remove redundant pinctrl call\ne8548e6 net: sockets: Reserve a default heap space for getaddrinfo\nfd8035e drivers: clock_control: stm32: replace pllsai1m with pllsaim\ne8a51e0 MAINTAINERS: Add op amp maintainers\n3b44da6 tests: posix: temporarily exclude two platforms failing in CI\n6bb4cb5 samples: usb: uac2: explicit: Fix SOF offset integer conversion glitch\nff50dfb samples: usb: uac2: Support High-Speed operation\nba8b36c boards: nordic: nrf54h20dk: Add SPI to supported features on PPR XIP\nbc2c95c tests: drivers: spi: spi_error_cases: Extend platform_allow list\n6d76a71 tests: drivers: spi: spi_loopback: Run test on nrf54h20 PPR XIP\nc180420 drivers: udc_dwc2: Fix memory leak on subsequent bus resets\n134042c tests,samples: boards: espressif: add missing psram0 node\n2948bc7 boards: espressif: esp32s3: No PSRAM in default board\n8d94c3b drivers: wifi: nrf_wifi: Set device config pointer to NULL\nca1ee72 drivers: Fix deprecated SPI_DT_SPEC_INST_GET usage\n0dfef14 include: drivers: spi.h: Fix deprecation support for SPI_DT_IODEV_DEFINE\ne3f3b6d drivers: sensor: Fix deprecated SPI_DT_IODEV_DEFINE usage\n48a9b04 tests: spi_loopback: Add timing params to RT1050 overlay\n82b882f drivers: spi: nxp_lpspi: Use spi_config timing params\n1154c96 include: drivers: spi.h: Get params from DT\n570b445 drivers: Convert to use SPI macro without delay parameters\na60f93d include: drivers: spi.h: Get CS delay parameters from DT\n186ce62 dts: bindings: spi-device: Add parameters for spi peripherals\nbee81df tests: drivers: flash: Test newly introduced MSPI driver features\n07809ad boards: st: nucleo_h753zi: update nucleo_h753zi.yaml\nf749b77 tests: drivers: watchdog: wdt_basic_api: add support for nucleo_h753zi\n6e0efe3 tests: drivers: uart: uart_basic_api: add support for nucleo_h753zi\nf84d4d5 tests: drivers: uart: uart_async_api: add support for nucleo_h753zi\n9067290 tests: drivers: rtc: rtc_api: add support for nucleo_h753zi\n9444db8 tests: drivers: pwm: pwm_loopback: add support for nucleo_h753zi\ne0c7679 tests: drivers: pwm: pwm_api: add support for nucleo_h753zi\n683d597 tests: drivers: i2c_target_api: boards: add support for nucleo_h753zi\n17558ee tests: drivers: flash: stm32: update testcase.yaml\n38771d2 tests: drivers: dma: loop_transfer: add support for nucleo_h753zi\nd8edc07 tests: drivers: dma: chan_blen_transfer: add support for nucleo_h753zi\n0a712d8 tests: drivers: dac: dac_api: add support for nucleo_h753zi\n492d978 tests: drivers: counter: counter_basic_api: boards: add nucleo_h753zi board\ne45786d tests: drivers: stm32_clock_configuration: allow nucleo_h753zi to run in CI\n51af2d7 tests: drivers: adc: adc_api: allow nucleo_h753zi to run in CI\n0336457 samples: net: allow nucleo_h753zi to run in CI\n75e90e5 samples: drivers: watchdog: allow nucleo_h753zi to run in CI\nf37f3fd samples: drivers: adc: adc_dt: allow nucleo_h753zi to run in CI\nb1156d0 tests: drivers: add nucleo_h753zi as integration platform\nfaa9918 boards: st: nucleo_h743zi: doc: add notice about board obsolescence\nca79733 drivers: pinctrl_nrf: Add support for SPIM CSN pin function\n8e07c77 soc: nuvoton: numicro: Disable m48x SPIM cache\n4021dd3 soc: stm32g0: Add configurable FLASH prefetch option for G0B0/G0B1/G0C1\n5cbb2a4 posix: switch to using posix_time.h and posix_signal.h\n882ee96 manifest: update hostap module to correct time.h and signal.h paths\n2feea75 posix: headers: create a more conformant posix_signal.h\n5db2b58 posix: headers: create a more conformant posix_time.h\n9b9e834 tests: net: wifi: configs: add posix tag, since there is a dependency\n745fd00 samples: drivers: spi_bitbang: Enable sample on nrf54h20 PPR core\n799d3cf dts: arm: nordic: Remove superfluous compatible strings\n3b48275 boards: nordic: nrf54l15dk: Fix cpuflpr SRAM address\ne6c2a82 dts: vendor: nordic: Add missing reg parameters\n767c21a drivers: power_domain: nrf_gpio_pad_group: Fix DT macro\n5d05c4b sys: timeutil: Replaced pointer to rvalues\n05b77ec soc: nordic: nrf54h: s2ram: Support disabled MPU\n5dd3bd5 drivers: serial: pl011: only declare ambiq pm action when used\n21da2d0 Bluetooth: Controller: Fix missing null pointer check\neac1175 drivers: sensor: ti: ti-hdc20xx: Fix sensor define\nbaef45f boards: Add Waveshare RP2040-GEEK board\n730a1f6 boards: Add Waveshare RP2040-Keyboard-3 development board\nfbdd3bb boards: Add Adafruit Trinkey QT2040 board\nf05f886 drivers: adc: remove \u0027\u0026\u0027 when assigning `adc_xxx_init`\n61bc445 kernel: essential work queue should not stop\n7d83155 Bluetooth: Host: Add note about recycled for BT_LE_ADV_OPT_CONN\nf068402 net: dns: swallow packets that have no useful records in them\nd64e626 tests: adjust CONFIG_MAX_THREAD_BYTES for some\nf298780 tests: smp_suspend: run only on qemu, native and hardware\n97b31e4 boards: nxp: mimxrt1180_evk: update jlinkscript for cm33/cm7\n3cf2cc0 soc: RT700 DSP Hifi4 enable cache handling\nca359b1 dts: nxp: Fix spi_bus_bridge warning\nb259e39 board: frdm_imx93: enable pcal6408 gpio expander\n9bdad1f drivers: xen: memory: add acquire_resource wrapper\n14ac666 drivers: xen: change gnttab_[get|put]_pages for multi-page support\n40e5f73 boards: nxp: mimxrt1160_evk: improve zephyr,flash location for M4\nddc58c0 boards: nxp: mimxrt1170_evk: improve zephyr,flash location for M4\n6270d29 boards: nxp: mimxrt1170_evk \u0026 rt1160: enable M4 CONFIG_NET_L2_ETHERNET\nca68c77 tests: drivers: build_all: led_strip: Add build test for ws2812-uart driver\neb30d03 dts: bindings: test: Add pin inversion to vnd,serial binding\n7e195a9 drivers: led_strip: Add UART-based driver for WS2812\nba20a37 dts: bindings: led: Add worldsemi,ws2812-uart binding\n1c902e5 adc: rts5912: implement power management\n1856a03 drivers: gpio: shell: fix asan reported oob error\n972b54c kernel: doc: Update thread deadline APIs\n7dea0c4 boards: amd: kv260_r5: Fix i2c ref clock node\n56ce2e3 amd: versalnet_rpu: Fix QEMU_CPU_TYPE for RPUs\ne868e01 sensor: fix: Add missing iodev const on zvrfy handler\n6360c7f drivers: usb: udc: Fix VBUS ready timeout dependency in Kconfig.dwc2\nf395f0e samples: bluetooth: Add testcase for ESP32-H2\n3244055 boards: esp32h2_devkitm: Add BT node\nf4cdf08 drivers: bt: esp32h2: Add support\n18dbda5 soc: esp32h2: Add BT support\n6290121 west.yml: hal_espressif: Update for ESP32-H2 BT support\n110e315 rm3100: decoder: fix missing const while edata buffer casting\nff7a350 rm3100: decoder: fix trigger detection on data-ready\n092a082 drivers: usb: udc: stm32: enhance PHY type \u0026 operating speed determination\ne31ddec drivers: usb: udc: stm32: rework PWR and PHY initialization\n7ec83e5 drivers: usb: udc: stm32: use HAL PCD macros for speed\na7df9e9 drivers: udc_stm32: select Kconfig option UDC_DRIVER_HAS_HIGH_SPEED_SUPPORT\n2b38bcb soc/mediatek/adsp: Add cpuclk driver for mt8188\n96d654b west.yml: Update hal_xtensa revision\na75d6a4 drivers/timer: Fix build error when run by twister\n5960d36 boards/mediatek: Add configs for mt8195, mt818X\nfc8c17f drivers/timer: Fix timer IRQ enable bit on MT818X and MT8195\n87a4497 drivers/timer: Fix timer clock source initialization for MT818X\nd77db24 boards/mediatek: Include AFE dts from the board device tree\nb5adc3d soc/mediatek/adsp: Fix enable/disable timer interrups for MT8188\n35a198c soc/mediatek/adsp: Fix ELF .sof_entry section flags\nb7eec0f cmake: linker: separate toolchain_ld_options() calls for grouped flags\n\nRoll-Count: 1\nGitWatcher: ignore\nOriginal-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/331892\nBot-Commit: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\nOriginal-Revision: 45cfb699172c844fc5c6363d31bbd4a9199d22f7\n\nRolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed\nRolled-Commits: b06cdf7b659664..45cfb699172c84\nRoll-Count: 1\nRoller-URL: https://cr-buildbucket.appspot.com/build/8701124429756246449\nGitWatcher: ignore\nCQ-Do-Not-Cancel-Tryjobs: true\nChange-Id: I92d77c5430b900f6da5f14e1be881d7ab0d07657\nReviewed-on: https://pigweed-review.googlesource.com/c/pigweed/examples/+/331992\nCommit-Queue: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\nBot-Commit: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\nLint: Lint 🤖 \u003candroid-build-ayeaye@system.gserviceaccount.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "b06cdf7b6596645827059ba7e9cb563b8d744942",
      "old_mode": 57344,
      "old_path": "third_party/pigweed",
      "new_id": "45cfb699172c844fc5c6363d31bbd4a9199d22f7",
      "new_mode": 57344,
      "new_path": "third_party/pigweed"
    }
  ]
}