commit | 3fc0a2b9a619f8c40e1a4e88092ef95c12e42f29 | [log] [tgz] |
---|---|---|
author | Chris Mumford <cmumford@google.com> | Thu Nov 17 15:08:21 2022 +0000 |
committer | Copybara-Service <copybara-worker@google.com> | Thu Nov 17 07:09:00 2022 -0800 |
tree | 4ed7947ef11a01cdfc48465a8a4858934abfad6a | |
parent | 0918c1f593af8d7bc25ff26d8205b86f4e19e3dd [diff] |
pw_display_pico_ili9341: minor cleanup Inlined simple accessors and minor improvements to error handling. Bug: none Change-Id: I84ba86e4b7e6d3a00aa4c79c0a13865bc70dc8bb Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/119735 Reviewed-by: Anthony DiGirolamo <tonymd@google.com> Commit-Queue: Chris Mumford <cmumford@google.com> GitOrigin-RevId: 5c99d4714d4e8a702a106643f2f18b41eddb2ba6
This repository contains experimental pigweed modules.
Clone this repo with --recursive
to get all required submodules.
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental
This will pull the Pigweed source repository into third_party/pigweed
. If you already cloned but forgot to --recursive
run git submodule update --init
to pull all submodules.
The //pw_graphics folder contains some libraries for drawing to an RGB565 framebuffer and displaying it on various platforms.
The demo applications that make use of these libraries are:
First time setup:
git clone --recursive https://pigweed.googlesource.com/pigweed/experimental cd experimental . ./bootstrap.sh pw package install imgui pw package install glfw pw package install stm32cube_f4 pw package install pico_sdk
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_stm32cube_f4=\"$PW_PROJECT_ROOT/environment/packages/stm32cube_f4\" " ninja -C out
Flash:
openocd -f third_party/pigweed/targets/stm32f429i_disc1/py/stm32f429i_disc1_utils/openocd_stm32f4xx.cfg -c "program out/stm32f429i_disc1_stm32cube_debug/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit"
Compile:
gn gen out --export-compile-commands --args=" dir_pw_third_party_imgui=\"$PW_PROJECT_ROOT/environment/packages/imgui\" dir_pw_third_party_glfw=\"$PW_PROJECT_ROOT/environment/packages/glfw\" " ninja -C out
Run:
out/host_debug/obj/applications/terminal_display/bin/terminal_demo
Working displays:
Compile:
gn gen out --export-compile-commands --args=" PICO_SRC_DIR=\"$PW_PROJECT_ROOT/environment/packages/pico_sdk\" " ninja -C out
Flash:
Using a uf2 file:
./out/host_debug/obj/targets/rp2040/bin/elf2uf2 ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
Copy ./out/rp2040/obj/applications/terminal_display/bin/terminal_demo.uf2
to your Pi Pico.
Using a Pico Probe and openocd:
This requires installing the Raspberry Pi foundation's OpenOCD fork for the Pico probe. More details including how to connect the two Pico boards is available at Raspberry Pi Pico and RP2040 - C/C++ Part 2: Debugging with VS Code
Install RaspberryPi's OpenOCD Fork:
git clone https://github.com/raspberrypi/openocd.git \ --branch picoprobe \ --depth=1 \ --no-single-branch \ openocd-picoprobe cd openocd-picoprobe ./bootstrap ./configure --enable-picoprobe --prefix=$HOME/apps/openocd --disable-werror make -j2 make install
Setup udev rules (Linux only):
cat <<EOF > 49-picoprobe.rules SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" EOF sudo cp 49-picoprobe.rules /usr/lib/udev/rules.d/49-picoprobe.rules sudo udevadm control --reload-rules
Flash the Pico:
~/apps/openocd/bin/openocd -f ~/apps/openocd/share/openocd/scripts/interface/picoprobe.cfg -f ~/apps/openocd/share/openocd/scripts/target/rp2040.cfg -c 'program out/rp2040/obj/applications/terminal_display/bin/terminal_demo.elf verify reset exit'
Setup NXP SDK:
Compile:
gn gen out --export-compile-commands --args=" pw_MIMXRT595_EVK_SDK=\"//environment/SDK_2_12_1_EVK-MIMXRT595\" pw_target_mimxrt595_evk_MANIFEST=\"//environment/SDK_2_12_1_EVK-MIMXRT595/EVK-MIMXRT595_manifest_v3_10.xml\" pw_third_party_mcuxpresso_SDK=\"//targets/mimxrt595_evk:mimxrt595_sdk\" " ninja -C out
Flash the MIMXRT595-EVK:
Follow the instructions to flash the MIMXRT595-EVK with the SEGGER J-Link firmware and using arm-none-eabi-gdb
at https://pigweed.dev/targets/mimxrt595_evk/target_docs.html#running-and-debugging.