// Copyright 2021 The Pigweed Authors
//
// Licensed under the Apache License, Version 2.0 (the "License"); you may not
// use this file except in compliance with the License. You may obtain a copy of
// the License at
//
//     https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
// License for the specific language governing permissions and limitations under
// the License.

#include "pw_boot_armv7m/boot.h"

#include "pw_malloc/malloc.h"
#include "pw_preprocessor/compiler.h"
#include "pw_sys_io_stm32cubef4/init.h"
#include "stm32f4xx.h"

void pw_boot_PreStaticMemoryInit() { SystemInit(); }

void pw_boot_PreStaticConstructorInit() {
#if PW_MALLOC_ACTIVE
  pw_MallocInit();
#endif  // PW_MALLOC_ACTIVE
}

// Initializes clock to its max, 180Mhz
static void ClockInit() {
  RCC_OscInitTypeDef RCC_OscInitStruct = {};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {};

  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 4;
  RCC_OscInitStruct.PLL.PLLN = 180;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 8;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
    pw_boot_PostMain();
  }

  // OverDrive required for operation > 168Mhz
  if (HAL_PWREx_EnableOverDrive() != HAL_OK) {
    pw_boot_PostMain();
  }

  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
                                RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
    pw_boot_PostMain();
  }
}

void pw_boot_PreMainInit() {
  HAL_Init();
  ClockInit();
  pw_sys_io_Init();
}

PW_NO_RETURN void pw_boot_PostMain() {
  // In case main() returns, just sit here until the device is reset.
  while (true) {
  }
  PW_UNREACHABLE;
}