)]}'
{
  "commit": "fa48d8fee9d14efc5801394f02df8c213b7589e5",
  "tree": "b247a83704ebc137c140282834d6c77225c6e513",
  "parents": [
    "43d80c37ea5b52ebdf9888454820aa38f80d3e1a"
  ],
  "author": {
    "name": "pigweed-roller",
    "email": "pigweed-roller@pigweed.infra.roller.pigweed-service-accounts.iam.gserviceaccount.com",
    "time": "Mon Jun 02 01:37:00 2025 -0700"
  },
  "committer": {
    "name": "CQ Bot Account",
    "email": "pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com",
    "time": "Mon Jun 02 01:37:00 2025 -0700"
  },
  "message": "roll: third_party/pigweed roll: zephyr\n\ncf6170c doc: build: dts: api: document the zephyr,camera chosen node\nc00015d samples: drivers: video: tcpserversink: add _dev suffix to variable\nbe5df19 samples: drivers: video: tcpserversink: sort header alphabetically\n1b3f96c samples: drivers: video: convert to new LOG_MODULE_REGISTER() syntax\na3465f8 drivers: video: sw_generator: convert to use the devicetree\ncc66467 samples: drivers: video: fix board definitions\n5fa26d9 video: gc2145: use VGA resolution as default\n79e218a video: gc2145: add CSI mode of the GC2145 sensor\n979d8ff video: gc2145: avoid default DVP enabling\neeab052 video: st_mipid02: addition of ST MIPID02 CSI bridge\nb0432a8 video: add LINK_FREQ ctrl and a helper to retrieve it\nb5d8aee video: common: addition of INTEGER_MENU control type\na459f1d video: addition of CSI2 standard data-type defines\n450345a ci: move weekly build back to sunday night\n8c7417a drivers: i3c: fix adv_info_get ret code\n8286b0e doc: coding guidelines: clarify severity\nff3d5f8 drivers: pwm: pwm_nrf_sw: use shutdown task if available\n240b560 drivers: ssp: unify clock selection flow across ACE platforms\naf1ba95 drivers: i3c: cdns: add busy status\nbb797ab cmake: Fix compilation options for kobject_hash*.c\ne87e054 drivers: spi_bitbang: Increase supported word size to 32 bits\nc8c0c29 arch: arm: cortex_a_r: use correct name for TLB Conflict Abort\n5ab74ff doc: arm: cortex_m: Update PACBTI support\nc6d1932 doc: arm: cortex_m: Update feature table\n35b5fb3 arch: arm: cortex_m: Add support for PACBTI flags\ne7dd7ab drivers: i2c: Add support for clock stretching in the i2c-gpio module.\nd3a7b7d drivers: i3c: cdns: fix ibi length with no payload\na673871 drivers: sensor: Remove broken reset from apds9306 driver\n62ea066 scripts: west_commands: simulate: Fix linter issues\nb9fb5d7 scripts: west_commands: robot: Fix linter issues\n359a0c2 scripts: west_commands: flash: Fix linter issues\n5321c14 scripts: west_commands: debug: Fix linter issues\nd9d4daa scripts: west_commands: build_helpers: Fix linter issues\n166fd3e scripts: west_commands: build: Fix linter issues\n2dc9c2b samples: subsys: nvs: add testcase for MCXN947 internal flash\nbb7f776 boards: nxp: frdm_mcxn947 and mcx_n9xx_evk: enable clock for FMU\n1fd24fb soc: nxp: mcx: MCXNx4x: update SOC to use flash_k4 driver\n6681f8d soc: nxp: s32k3: configure missing mpu regions\n63ebf4d Revert \"arch: arm: mpu: fix erratum 1013783-B\"\ndb726c4 sw_isr_table: Add spaces to fix compiler warning\nae114f1 tests: modem_ubx: Fix clang failure by removing static keyword\n923fedb arch/x86/core: Use CONFIG_QEMU_TARGET for QEMU specific code\nd54c308 docs: fix typo in vendor-prefixes for Digilent Inc.\ndbb3243 samples: sensor: accel_trig: add fixture for shield-tap\n66d90e7 soc: nxp_kinetis: Mark  __kinetis_flash_config  with __used attribute\n481711e tests: spi_loopback: Fix fail handle of thread test\nc10c13b tests: spi_loopback: Handle overflow of print latency\neb5014f soc: imxrt: add mimxrt1052/1062 flashing configuration\ndf65918 drivers: spi: spi_context.h: remove multithreading dependency\n7af5523 driver: sensor: aosong,dht: fix sensor protocol broken since change #83192\n1fb86e1 doc: release: update/consolidate LTS information\n36e0b3d modules: optional: rust: Update to latest development\nc6a41a4 tests: boot: Update imgtool path in west_sign_wrapper\nf5d1803 tests: drivers: build_all: stepper: add uart configuration for tmc51xx\n358907b drivers: stepper: adi_tmc: tmc51xx uart support\na66d064 drivers: stepper: adi_tmc: extend rampstat mask range\nb914537 drivers: stepper: adi_tmc: extend to support uart\n6cc860d drivers: stepper: adi_tmc: bus: abstraction layer for bus\nbceeb76 dts: bindings: stepper: adi: tmc51xx uart support\n94a7f02 ubx: Refactor codebase in order to improve usability\nf1df212 soc: rw: Enable flexcomm wakeup/sleep clocking\ne5a35e6 drivers: uart_mcux_flexcomm: Enable as wakeup src\n4598c18 soc: rw: Switch main clock on PM2 to LPOSC\n6bd6e50 pm: Add API to check if a state disables a device\n65ebecb pm: refactor policy_device_ get/put\n481a2fa uart_mcux_flexcomm: Fix TX garbage char bug in PM\na550c74 doc: document `WIFI_USAGE_MODE`\n3aa61a9 tests: wifi: nrf_wifi: reduce config overrides\n3d7979e drivers: wifi: nxp: auto `NXP_WIFI_SOFTAP_SUPPORT`\n53cf5ff drivers: wifi: esp32: auto `ESP32_WIFI_AP_STA_MODE`\n90a2d0e drivers: wifi: nrf_wifi: operation mode from application request\n7dbd36a drivers: wifi: options for application usage of Wi-Fi\n5cffb8e modules: lvgl: Register print callback after lv_init\n3d24070 kernel: work: add k_work_queue_run()\n2c69e7c dts: vendor: nordic: Fix wrong GPREGRET addresses\ne04f679 openthread: Add Kconfigs for packet TX time and carrier functions\n0336721 led: fix up the ENOSYS condition to pass coverity\naf43487 tests: boards: nrf: i2s: i2s_divider: Confirm CLK divider value\nb991632 tests: drivers: i2s: i2s_speed: Fix typo in Kconfig file\n801107e drivers: firmware: add IRONside boot report\n588c2e6 soc: esp32c6: Fix sleep routine\n5712c96 west.yml: hal_espressif: Fix ESP32-C6 sleep routine\n8951711 drivers: uhc: udc: use DYNAMIC_INTERRUPTS for KHCI and EHCI\ne98cfa4 boards: nxp: add uhc support for mimxrt1050_evk\na8796ca boards: nxp: add uhc support for frdm_k22f, rt1060, lpc55s69 and lpc55s28\nabfa945 drivers: uhc: implement nxp mcux uhc driver\n7bbb834 Revert \"posix: rwlock: Refactor locking using k_timepoint_t\"\n0a6e579 Revert \"posix: net: move static inline gethostname() to lib definition\"\na649b31 Revert \"posix: device_io: mark pwrite() buf as const\"\nda48a04 Revert \"posix: sysconf: match _SC* defines with newlib/picolib\"\na098f5c Revert \"posix: move PTHREAD_STACK_MIN to posix_features\"\nd410b2c samples: counter: alarm: undef redefined TIMER for ambiq\nd5931ba net: lib: coap: Return an error on removing a non-existing observer\n39ae9c3 samples: drivers: counter: alarm: support nrf54h and nrf54l\nc0c1b0a drivers: flash: Align NXP flash drivers on parameter checking\n298f6d8 drivers: flash: Add documentation on read API\n73faf5c doc: doxygen: Add openthread module header to INPUT\n47f39a1 net: openthread: Remove OpenThread module API from net header\n201d928 openthread: Add header for OpenThread module\n463f518 drivers: Update dtc transfer info alignment\n\nRoll-Count: 1\nGitWatcher: ignore\nOriginal-Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/295405\nBot-Commit: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\nOriginal-Revision: c40a7a1128aeddfabc61e129f3d47ef225dbe8de\n\nRolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed\nRolled-Commits: a1e8863cfc6d7a..c40a7a1128aedd\nRoll-Count: 1\nRoller-URL: https://cr-buildbucket.appspot.com/build/8713188602466236609\nGitWatcher: ignore\nCQ-Do-Not-Cancel-Tryjobs: true\nChange-Id: I99037a8ea561662f7b1c107b37ecedf155852c4f\nReviewed-on: https://pigweed-review.googlesource.com/c/pigweed/experimental/+/295533\nLint: Lint 🤖 \u003candroid-build-ayeaye@system.gserviceaccount.com\u003e\nBot-Commit: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\nCommit-Queue: Pigweed Roller \u003cpigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "a1e8863cfc6d7a7398eb8bc31898154f0dde6fd8",
      "old_mode": 57344,
      "old_path": "third_party/pigweed",
      "new_id": "c40a7a1128aeddfabc61e129f3d47ef225dbe8de",
      "new_mode": 57344,
      "new_path": "third_party/pigweed"
    }
  ]
}
