commit | 31dadc1411a6803c2ab66b95f2f8d850601ed7f4 | [log] [tgz] |
---|---|---|
author | pigweed-roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com> | Fri Apr 12 09:10:53 2024 +0000 |
committer | CQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com> | Fri Apr 12 09:10:53 2024 +0000 |
tree | 4e443fb5e31a8a7bd3a63230866110d69f7caae9 | |
parent | 0c509100fe45dcbb9fb4cfb47fe7afa4f63be448 [diff] |
[third_party/pigweed] Roll 6 commits 23691711b80943a pw_sensor: Update validator schema to JSON schema ef95198f19c71b6 pw_bluetooth: Add EventMask and temp field in SetE 54c7a6dbc4ad7fc pw_build: Collect wheel fix c1e0bee4e3ec707 pw_sensor: Provide a validator 4a9b1e019b19eb4 pw_bluetooth: Store length max in virtual field d8c170bbb03c587 pw_sensor: Add module stub https://pigweed.googlesource.com/pigweed/pigweed third_party/pigweed Rolled-Commits: e79414ec1071a38..23691711b80943a Roller-URL: https://ci.chromium.org/b/8750874622812975537 GitWatcher: ignore CQ-Do-Not-Cancel-Tryjobs: true Change-Id: Iecc80c6ec98c2070b9b63cdfbb57899d675307d4 Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/kudzu/+/203110 Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com> Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Make sure you've set up Pigweed's prerequisites.
If you're on Windows, you can automate the initial setup by downloading the first-time setup script from cmd.exe:
curl https://pigweed.googlesource.com/pigweed/sample_project/+/main/tools/setup_windows_prerequisites.bat?format=TEXT > setup_pigweed_prerequisites.b64 && certutil -decode -f setup_pigweed_prerequisites.b64 setup_pigweed_prerequisites.bat && del setup_pigweed_prerequisites.b64
Then you can run the script with the following command in cmd.exe:
setup_pigweed_prerequisites.bat
Note: You may see a few UAC prompts as the script installs Git, Python, and enables developer mode.
Once that is done, you can clone this project with the following command:
git clone https://pigweed.googlesource.com/pigweed/kudzu
Pigweed uses a local development environment for most of its tools. This means tools are not installed to your machine, and are instead stored in a directory inside your project (Note: git ignores this directory). The tools are temporarily added to the PATH of the current shell session.
To make sure the latest tooling has been fetched and set up, run the bootstrap command for your operating system:
Windows
bootstrap.bat
Linux & Mac
source ./bootstrap.sh
After tooling updates, you might need to run bootstrap again to ensure the latest tools.
After the initial bootstrap, you can use use the activate
scripts to configure the current shell for development without doing a full update.
Windows
activate.bat
Linux & Mac
source ./activate.sh
Install the pico SDK and tool to flash the device.
pw package install pico_sdk
pw package install picotool
These packages will be built and added to the path automatically. There is no need to add these to the gn arguments.
Install the GLFW OpenGL library
sudo apt install libglfw3-dev libglfw3
Put the following into /usr/lib/udev/rules.d/49-picoprobe.rules
# Pico app mode SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666", SYMLINK+="rp2040" # RP2 Boot SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666", SYMLINK+="rp2040" # Picoprobe SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666", SYMLINK+="picoprobe"
This will also symlink /dev/picoprobe
and /dev/rp2040
to the respective vendor and product ids.
Apply the above rules with:
sudo udevadm control --reload-rules sudo udevadm trigger
pw build
Run the host app and connect to it via pw console
:
./out/gn/host_device_simulator.speed_optimized/obj/applications/badge/bin/badge & \ pw console --socket-addr default ; \ killall badge
export ELF=./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf picotool reboot -f -u && \ sleep 3 && \ picotool load -x $ELF
Connect with pw console
:
pw console --verbose \ --baudrate 115200 \ --token-databases ./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf \ --device /dev/rp2040
From Python Repl window you can issue RPCs interactively:
>>> device.rpcs.kudzu.rpc.Kudzu.PackageTemp() (Status.OK, kudzu.rpc.PackageTempResponse(temp=27.60657501220703))