Google Git
Sign in
pigweed / pigweed / kudzu / dcef09a327e889c31b00dd075ae92e6cb4111ffb
commitdcef09a327e889c31b00dd075ae92e6cb4111ffb[log] [tgz]
authorpigweed-roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>Mon May 19 18:29:18 2025 -0700
committerCQ Bot Account <pigweed-scoped@luci-project-accounts.iam.gserviceaccount.com>Mon May 19 18:29:18 2025 -0700
tree3c5d2013b4057ca966c90d8dc6371596d9cc5b02
parent915659e714b41d4b5461add8ff26f0126b737233 [diff]
roll: third_party/pigweed 43202d4..d375fc0 (5 commits)

d375fc0:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/291638 pw_ide: Disable failing unit test
2a8bcd7:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/284192 pw_build: Remove remaining instances of dir_pw_third_party
5c59576:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/292257 pw_kernel: Add userspace demo to qemu_virt_riscv32 target
309b306:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/292072 pw_kernel: Add userspace demo to pw-rp2350 target
e329109:https://pigweed-review.googlesource.com/c/pigweed/pigweed/+/292262 pw_thread_threadx: Allow minimum priority preemption threshold

Rolled-Repo: https://pigweed.googlesource.com/pigweed/pigweed
Rolled-Commits: 43202d41d49cdb..d375fc0decc0d5
Roll-Count: 1
Roller-URL: https://cr-buildbucket.appspot.com/build/8714393115744935585
GitWatcher: ignore
CQ-Do-Not-Cancel-Tryjobs: true
Change-Id: I9f61596b6297fc37a3f818d86c2df9d1801120e6
Reviewed-on: https://pigweed-review.googlesource.com/c/pigweed/kudzu/+/292798
Bot-Commit: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Commit-Queue: Pigweed Roller <pigweed-roller@pigweed-service-accounts.iam.gserviceaccount.com>
Lint: Lint 🤖 <android-build-ayeaye@system.gserviceaccount.com>
1 file changed
tree: 3c5d2013b4057ca966c90d8dc6371596d9cc5b02
  1. applications/
  2. build_overrides/
  3. lib/
  4. pcb/
  5. targets/
  6. third_party/
  7. tools/
  8. .clang-format ⇨ third_party/pigweed/.clang-format
  9. activate.fish ⇨ bootstrap.fish
  10. activate.sh ⇨ bootstrap.sh
  11. .bazelignore
  12. .bazelrc
  13. .bazelversion
  14. .gitignore
  15. .gitmodules
  16. .gn
  17. activate.bat
  18. banner.txt
  19. bootstrap.bat
  20. bootstrap.fish
  21. bootstrap.sh
  22. BUILD.gn
  23. BUILDCONFIG.gn
  24. OWNERS
  25. pigweed.json
  26. README.md
  27. WORKSPACE
README.md

Kudzu

Getting Started

Make sure you've set up Pigweed's prerequisites.

If you're on Windows, you can automate the initial setup by downloading the first-time setup script from cmd.exe:

curl https://pigweed.googlesource.com/pigweed/sample_project/+/main/tools/setup_windows_prerequisites.bat?format=TEXT > setup_pigweed_prerequisites.b64 && certutil -decode -f setup_pigweed_prerequisites.b64 setup_pigweed_prerequisites.bat && del setup_pigweed_prerequisites.b64

Then you can run the script with the following command in cmd.exe:

setup_pigweed_prerequisites.bat

Note: You may see a few UAC prompts as the script installs Git, Python, and enables developer mode.

Once that is done, you can clone this project with the following command:

git clone https://pigweed.googlesource.com/pigweed/kudzu

Environment setup

Pigweed uses a local development environment for most of its tools. This means tools are not installed to your machine, and are instead stored in a directory inside your project (Note: git ignores this directory). The tools are temporarily added to the PATH of the current shell session.

To make sure the latest tooling has been fetched and set up, run the bootstrap command for your operating system:

Windows

bootstrap.bat

Linux & Mac

source ./bootstrap.sh

After tooling updates, you might need to run bootstrap again to ensure the latest tools.

After the initial bootstrap, you can use use the activate scripts to configure the current shell for development without doing a full update.

Windows

activate.bat

Linux & Mac

source ./activate.sh

Device tools setup

Install the pico SDK and tool to flash the device.

pw package install pico_sdk
pw package install picotool

These packages will be built and added to the path automatically. There is no need to add these to the gn arguments.

Linux Setup

GLFW Dependency:

Install the GLFW OpenGL library

sudo apt install libglfw3-dev libglfw3

Udev Rules:

Put the following into /usr/lib/udev/rules.d/49-picoprobe.rules

# Pico app mode
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="000a", MODE:="0666", SYMLINK+="rp2040"

# RP2 Boot
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0003", MODE:="0666", SYMLINK+="rp2040"

# Picoprobe
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="0004", MODE:="0666", SYMLINK+="picoprobe"

This will also symlink /dev/picoprobe and /dev/rp2040 to the respective vendor and product ids.

Apply the above rules with:

sudo udevadm control --reload-rules
sudo udevadm trigger

Compile:

pw build

Run:

Host

Run the host app and connect to it via pw console:

./out/gn/host_device_simulator.speed_optimized/obj/applications/badge/bin/badge & \
  pw console --socket-addr default ; \
  killall badge

Kudzu

export ELF=./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf

picotool reboot -f -u && \
  sleep 3 && \
  picotool load -x $ELF

Connect with pw console:

pw console --verbose \
  --baudrate 115200 \
  --token-databases ./out/gn/rp2040.size_optimized/obj/applications/badge/bin/badge.elf \
  --device /dev/rp2040

From Python Repl window you can issue RPCs interactively:

>>> device.rpcs.kudzu.rpc.Kudzu.PackageTemp()
(Status.OK, kudzu.rpc.PackageTempResponse(temp=27.60657501220703))