blob: e758aa2b6a252d25f34881cf993c13fe8a3c0e48 [file] [log] [blame]
/*
* Copyright 2020 The Pigweed Authors
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
/* This relatively simplified linker script will work with many ARMv7-M cores
* that have on-board memory-mapped RAM and FLASH. For more complex projects and
* devices, it's possible this linker script will not be sufficient as-is.
*
* This linker script is likely not suitable for a project with a bootloader.
*/
/* Provide useful error messages when required configurations are not set. */
#ifndef PW_BOOT_VECTOR_TABLE_BEGIN
#error "PW_BOOT_VECTOR_TABLE_BEGIN is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_VECTOR_TABLE_BEGIN
#ifndef PW_BOOT_VECTOR_TABLE_SIZE
#error "PW_BOOT_VECTOR_TABLE_SIZE is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_VECTOR_TABLE_SIZE
#ifndef PW_BOOT_FLASH_BEGIN
#error "PW_BOOT_FLASH_BEGIN is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_FLASH_BEGIN
#ifndef PW_BOOT_FLASH_SIZE
#error "PW_BOOT_FLASH_SIZE is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_FLASH_SIZE
#ifndef PW_BOOT_RAM_BEGIN
#error "PW_BOOT_RAM_BEGIN is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_RAM_BEGIN
#ifndef PW_BOOT_RAM_SIZE
#error "PW_BOOT_RAM_SIZE is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_RAM_SIZE
#ifndef PW_BOOT_HEAP_SIZE
#error "PW_BOOT_HEAP_SIZE is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_HEAP_SIZE
#ifndef PW_BOOT_MIN_STACK_SIZE
#error "PW_BOOT_MIN_STACK_SIZE is not defined, and is required to use pw_boot_armv7m"
#endif // PW_BOOT_MIN_STACK_SIZE
/* Note: This technically doesn't set the firmware's entry point. Setting the
* firmware entry point is done by setting vector_table[1]
* (Reset_Handler). However, this DOES tell the compiler how to optimize
* when --gc-sections is enabled.
*/
ENTRY(pw_boot_Entry)
MEMORY
{
/* TODO(pwbug/57): Make it possible for projects to freely customize
* memory regions.
*/
/* Vector Table (typically in flash) */
VECTOR_TABLE(rx) : \
ORIGIN = PW_BOOT_VECTOR_TABLE_BEGIN, \
LENGTH = PW_BOOT_VECTOR_TABLE_SIZE
/* Internal Flash */
FLASH(rx) : \
ORIGIN = PW_BOOT_FLASH_BEGIN, \
LENGTH = PW_BOOT_FLASH_SIZE
/* Internal SRAM */
RAM(rwx) : \
ORIGIN = PW_BOOT_RAM_BEGIN, \
LENGTH = PW_BOOT_RAM_SIZE
}
SECTIONS
{
/* This is the link-time vector table. If used, the VTOR (Vector Table Offset
* Register) MUST point to this memory location in order to be used. This can
* be done by ensuring this section exists at the default location of the VTOR
* so it's used on reset, or by explicitly setting the VTOR in a bootloader
* manually to point to &pw_boot_vector_table_addr before interrupts are enabled.
*/
.vector_table : ALIGN(512)
{
pw_boot_vector_table_addr = .;
KEEP(*(.vector_table))
} >VECTOR_TABLE
/* Main executable code. */
.code : ALIGN(8)
{
. = ALIGN(8);
/* Application code. */
*(.text)
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
. = ALIGN(8);
/* Constants.*/
*(.rodata)
*(.rodata*)
/* .preinit_array, .init_array, .fini_array are used by libc.
* Each section is a list of function pointers that are called pre-main and
* post-exit for object initialization and tear-down.
* Since the region isn't explicitly referenced, specify KEEP to prevent
* link-time garbage collection. SORT is used for sections that have strict
* init/de-init ordering requirements. */
. = ALIGN(8);
PROVIDE_HIDDEN(__preinit_array_start = .);
KEEP(*(.preinit_array*))
PROVIDE_HIDDEN(__preinit_array_end = .);
PROVIDE_HIDDEN(__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array*))
PROVIDE_HIDDEN(__init_array_end = .);
PROVIDE_HIDDEN(__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array*))
PROVIDE_HIDDEN(__fini_array_end = .);
} >FLASH
/* Used by unwind-arm/ */
.ARM : ALIGN(8) {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
/* Explicitly initialized global and static data. (.data)*/
.static_init_ram : ALIGN(8)
{
*(.data)
*(.data*)
. = ALIGN(8);
} >RAM AT> FLASH
/* Zero initialized global/static data. (.bss)
* This section is zero initialized in pw_boot_Entry(). */
.zero_init_ram : ALIGN(8)
{
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(8);
} >RAM
.heap : ALIGN(8)
{
pw_boot_heap_low_addr = .;
. = . + PW_BOOT_HEAP_SIZE;
. = ALIGN(8);
pw_boot_heap_high_addr = .;
} >RAM
/* Link-time check for stack overlaps. */
.stack (NOLOAD) : ALIGN(8)
{
/* Set the address that the main stack pointer should be initialized to. */
pw_boot_stack_low_addr = .;
HIDDEN(_stack_size = ORIGIN(RAM) + LENGTH(RAM) - .);
/* Align the stack to a lower address to ensure it isn't out of range. */
HIDDEN(_stack_high = (. + _stack_size) & ~0x7);
ASSERT(_stack_high - . >= PW_BOOT_MIN_STACK_SIZE,
"Error: Not enough RAM for desired minimum stack size.");
. = _stack_high;
pw_boot_stack_high_addr = .;
} >RAM
/* Discard unwind info. */
.ARM.extab 0x0 (INFO) :
{
KEEP(*(.ARM.extab*))
}
}
/* Symbols used by core_init.c: */
/* Start of .static_init_ram in FLASH. */
_pw_static_init_flash_start = LOADADDR(.static_init_ram);
/* Region of .static_init_ram in RAM. */
_pw_static_init_ram_start = ADDR(.static_init_ram);
_pw_static_init_ram_end = _pw_static_init_ram_start + SIZEOF(.static_init_ram);
/* Region of .zero_init_ram. */
_pw_zero_init_ram_start = ADDR(.zero_init_ram);
_pw_zero_init_ram_end = _pw_zero_init_ram_start + SIZEOF(.zero_init_ram);
/* arm-none-eabi expects `end` symbol to point to start of heap for sbrk. */
PROVIDE(end = _pw_zero_init_ram_end);