| [MASTER] |
| |
| # A comma-separated list of package or module names from where C extensions may |
| # be loaded. Extensions are loading into the active Python interpreter and may |
| # run arbitrary code. |
| extension-pkg-whitelist=mypy |
| |
| # Add files or directories to the blacklist. They should be base names, not |
| # paths. |
| ignore=CVS |
| |
| # Add files or directories matching the regex patterns to the blacklist. The |
| # regex matches against base names, not paths. |
| ignore-patterns= |
| |
| # Python code to execute, usually for sys.path manipulation such as |
| # pygtk.require(). |
| #init-hook= |
| |
| # Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the |
| # number of processors available to use. |
| jobs=0 |
| |
| # Control the amount of potential inferred values when inferring a single |
| # object. This can help the performance when dealing with large functions or |
| # complex, nested conditions. |
| limit-inference-results=100 |
| |
| # List of plugins (as comma separated values of python module names) to load, |
| # usually to register additional checkers. |
| load-plugins= |
| |
| # Pickle collected data for later comparisons. |
| persistent=yes |
| |
| # Specify a configuration file. |
| #rcfile= |
| |
| # When enabled, pylint would attempt to guess common misconfiguration and emit |
| # user-friendly hints instead of false-positive error messages. |
| suggestion-mode=yes |
| |
| # Allow loading of arbitrary C extensions. Extensions are imported into the |
| # active Python interpreter and may run arbitrary code. |
| unsafe-load-any-extension=no |
| |
| |
| [MESSAGES CONTROL] |
| |
| # Only show warnings with the listed confidence levels. Leave empty to show |
| # all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED. |
| confidence= |
| |
| # Disable the message, report, category or checker with the given id(s). You |
| # can either give multiple identifiers separated by comma (,) or put this |
| # option multiple times (only on the command line, not in the configuration |
| # file where it should appear only once). You can also use "--disable=all" to |
| # disable everything first and then reenable specific checks. For example, if |
| # you want to run only the similarities checker, you can use "--disable=all |
| # --enable=similarities". If you want to run only the classes checker, but have |
| # no Warning level messages displayed, use "--disable=all --enable=classes |
| # --disable=W". |
| disable=fixme, |
| subprocess-run-check |
| |
| # Enable the message, report, category or checker with the given id(s). You can |
| # either give multiple identifier separated by comma (,) or put this option |
| # multiple time (only on the command line, not in the configuration file where |
| # it should appear only once). See also the "--disable" option for examples. |
| enable=c-extension-no-member |
| |
| |
| [REPORTS] |
| |
| # Python expression which should return a score less than or equal to 10. You |
| # have access to the variables 'error', 'warning', 'refactor', and 'convention' |
| # which contain the number of messages in each category, as well as 'statement' |
| # which is the total number of statements analyzed. This score is used by the |
| # global evaluation report (RP0004). |
| evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) |
| |
| # Template used to display messages. This is a python new-style format string |
| # used to format the message information. See doc for all details. |
| #msg-template= |
| |
| # Set the output format. Available formats are text, parseable, colorized, json |
| # and msvs (visual studio). You can also give a reporter class, e.g. |
| # mypackage.mymodule.MyReporterClass. |
| output-format=text |
| |
| # Tells whether to display a full report or only the messages. |
| reports=no |
| |
| # Activate the evaluation score. |
| score=no |
| |
| |
| [REFACTORING] |
| |
| # Maximum number of nested blocks for function / method body |
| max-nested-blocks=5 |
| |
| # Complete name of functions that never returns. When checking for |
| # inconsistent-return-statements if a never returning function is called then |
| # it will be considered as an explicit return statement and no message will be |
| # printed. |
| never-returning-functions=sys.exit |
| |
| |
| [FORMAT] |
| |
| # Expected format of line ending, e.g. empty (any line ending), LF or CRLF. |
| expected-line-ending-format=LF |
| |
| # Regexp for a line that is allowed to be longer than the limit. |
| ignore-long-lines=^\s*(# )?<?https?://\S+>?$ |
| |
| # Number of spaces of indent required inside a hanging or continued line. |
| indent-after-paren=4 |
| |
| # String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 |
| # tab). |
| indent-string=' ' |
| |
| # Maximum number of characters on a single line. |
| max-line-length=80 |
| |
| # Maximum number of lines in a module. |
| max-module-lines=9999 |
| |
| # List of optional constructs for which whitespace checking is disabled. `dict- |
| # separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}. |
| # `trailing-comma` allows a space between comma and closing bracket: (a, ). |
| # `empty-line` allows space-only lines. |
| no-space-check=trailing-comma, |
| dict-separator |
| |
| # Allow the body of a class to be on the same line as the declaration if body |
| # contains single statement. |
| single-line-class-stmt=no |
| |
| # Allow the body of an if to be on the same line as the test if there is no |
| # else. |
| single-line-if-stmt=no |
| |
| |
| [VARIABLES] |
| |
| # List of additional names supposed to be defined in builtins. Remember that |
| # you should avoid defining new builtins when possible. |
| additional-builtins= |
| |
| # Tells whether unused global variables should be treated as a violation. |
| allow-global-unused-variables=yes |
| |
| # List of strings which can identify a callback function by name. A callback |
| # name must start or end with one of those strings. |
| callbacks=cb_, |
| _cb |
| |
| # A regular expression matching the name of dummy variables (i.e. expected to |
| # not be used). |
| dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_ |
| |
| # Argument names that match this expression will be ignored. Default to name |
| # with leading underscore. |
| ignored-argument-names=_.*|^ignored_|^unused_ |
| |
| # Tells whether we should check for unused import in __init__ files. |
| init-import=no |
| |
| # List of qualified module names which can have objects that can redefine |
| # builtins. |
| redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io |
| |
| |
| [SPELLING] |
| |
| # Limits count of emitted suggestions for spelling mistakes. |
| max-spelling-suggestions=4 |
| |
| # Spelling dictionary name. Available dictionaries: none. To make it work, |
| # install the python-enchant package. |
| spelling-dict= |
| |
| # List of comma separated words that should not be checked. |
| spelling-ignore-words= |
| |
| # A path to a file that contains the private dictionary; one word per line. |
| spelling-private-dict-file= |
| |
| # Tells whether to store unknown words to the private dictionary (see the |
| # --spelling-private-dict-file option) instead of raising a message. |
| spelling-store-unknown-words=no |
| |
| |
| [LOGGING] |
| |
| # Format style used to check logging format string. `old` means using % |
| # formatting, `new` is for `{}` formatting,and `fstr` is for f-strings. |
| logging-format-style=old |
| |
| # Logging modules to check that the string format arguments are in logging |
| # function parameter format. |
| logging-modules=logging |
| |
| |
| [SIMILARITIES] |
| |
| # Ignore comments when computing similarities. |
| ignore-comments=yes |
| |
| # Ignore docstrings when computing similarities. |
| ignore-docstrings=yes |
| |
| # Ignore imports when computing similarities. |
| ignore-imports=no |
| |
| # Minimum lines number of a similarity. |
| min-similarity-lines=4 |
| |
| |
| [MISCELLANEOUS] |
| |
| # List of note tags to take in consideration, separated by a comma. |
| notes=FIXME, |
| XXX, |
| TODO |
| |
| |
| [STRING] |
| |
| # This flag controls whether the implicit-str-concat-in-sequence should |
| # generate a warning on implicit string concatenation in sequences defined over |
| # several lines. |
| check-str-concat-over-line-jumps=no |
| |
| |
| [BASIC] |
| |
| # Naming style matching correct argument names. |
| argument-naming-style=snake_case |
| |
| # Regular expression matching correct argument names. Overrides argument- |
| # naming-style. |
| #argument-rgx= |
| |
| # Naming style matching correct attribute names. |
| attr-naming-style=snake_case |
| |
| # Regular expression matching correct attribute names. Overrides attr-naming- |
| # style. |
| #attr-rgx= |
| |
| # Bad variable names which should always be refused, separated by a comma. |
| bad-names=foo, |
| bar, |
| baz, |
| toto, |
| tutu, |
| tata |
| |
| # Naming style matching correct class attribute names. |
| class-attribute-naming-style=any |
| |
| # Regular expression matching correct class attribute names. Overrides class- |
| # attribute-naming-style. |
| #class-attribute-rgx= |
| |
| # Naming style matching correct class names. |
| class-naming-style=PascalCase |
| |
| # Regular expression matching correct class names. Overrides class-naming- |
| # style. |
| #class-rgx= |
| |
| # Naming style matching correct constant names. |
| const-naming-style=UPPER_CASE |
| |
| # Regular expression matching correct constant names. Overrides const-naming- |
| # style. |
| const-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$ |
| |
| # Minimum line length for functions/classes that require docstrings, shorter |
| # ones are exempt. |
| docstring-min-length=30 |
| |
| # Naming style matching correct function names. |
| function-naming-style=snake_case |
| |
| # Regular expression matching correct function names. Overrides function- |
| # naming-style. |
| #function-rgx= |
| |
| # Good variable names which should always be accepted, separated by a comma. |
| good-names=i, |
| j, |
| k, |
| db, |
| ex, |
| fd, |
| id, |
| ok, |
| Run, |
| T, |
| _ |
| |
| # Include a hint for the correct naming format with invalid-name. |
| include-naming-hint=no |
| |
| # Naming style matching correct inline iteration names. |
| inlinevar-naming-style=any |
| |
| # Regular expression matching correct inline iteration names. Overrides |
| # inlinevar-naming-style. |
| #inlinevar-rgx= |
| |
| # Naming style matching correct method names. |
| method-naming-style=snake_case |
| |
| # Regular expression matching correct method names. Overrides method-naming- |
| # style. |
| #method-rgx= |
| |
| # Naming style matching correct module names. |
| module-naming-style=snake_case |
| |
| # Regular expression matching correct module names. Overrides module-naming- |
| # style. |
| #module-rgx= |
| |
| # Colon-delimited sets of names that determine each other's naming style when |
| # the name regexes allow several styles. |
| name-group= |
| |
| # Regular expression which should only match function or class names that do |
| # not require a docstring. |
| no-docstring-rgx=^_ |
| |
| # List of decorators that produce properties, such as abc.abstractproperty. Add |
| # to this list to register other decorators that produce valid properties. |
| # These decorators are taken in consideration only for invalid-name. |
| property-classes=abc.abstractproperty |
| |
| # Naming style matching correct variable names. |
| variable-naming-style=snake_case |
| |
| # Regular expression matching correct variable names. Overrides variable- |
| # naming-style. |
| #variable-rgx= |
| |
| |
| [TYPECHECK] |
| |
| # List of decorators that produce context managers, such as |
| # contextlib.contextmanager. Add to this list to register other decorators that |
| # produce valid context managers. |
| contextmanager-decorators=contextlib.contextmanager |
| |
| # List of members which are set dynamically and missed by pylint inference |
| # system, and so shouldn't trigger E1101 when accessed. Python regular |
| # expressions are accepted. |
| generated-members=descriptor_pb2.*,plugin_pb2.* |
| |
| # Tells whether missing members accessed in mixin class should be ignored. A |
| # mixin class is detected if its name ends with "mixin" (case insensitive). |
| ignore-mixin-members=yes |
| |
| # Tells whether to warn about missing members when the owner of the attribute |
| # is inferred to be None. |
| ignore-none=yes |
| |
| # This flag controls whether pylint should warn about no-member and similar |
| # checks whenever an opaque object is returned when inferring. The inference |
| # can return multiple potential results while evaluating a Python object, but |
| # some branches might not be evaluated, which results in partial inference. In |
| # that case, it might be useful to still emit no-member and other checks for |
| # the rest of the inferred objects. |
| ignore-on-opaque-inference=yes |
| |
| # List of class names for which member attributes should not be checked (useful |
| # for classes with dynamically set attributes). This supports the use of |
| # qualified names. |
| ignored-classes=optparse.Values, |
| thread._local, |
| _thread._local, |
| pw_cli.envparse.EnvNamespace, |
| pw_rpc.packet_pb2.RpcPacket |
| |
| # List of module names for which member attributes should not be checked |
| # (useful for modules/projects where namespaces are manipulated during runtime |
| # and thus existing member attributes cannot be deduced by static analysis). It |
| # supports qualified module names, as well as Unix pattern matching. |
| ignored-modules= |
| |
| # Show a hint with possible names when a member name was not found. The aspect |
| # of finding the hint is based on edit distance. |
| missing-member-hint=yes |
| |
| # The minimum edit distance a name should have in order to be considered a |
| # similar match for a missing member name. |
| missing-member-hint-distance=1 |
| |
| # The total number of similar names that should be taken in consideration when |
| # showing a hint for a missing member. |
| missing-member-max-choices=1 |
| |
| # List of decorators that change the signature of a decorated function. |
| signature-mutators= |
| |
| |
| [DESIGN] |
| |
| # Maximum number of arguments for function / method. |
| max-args=10 |
| |
| # Maximum number of attributes for a class (see R0902). |
| max-attributes=11 |
| |
| # Maximum number of boolean expressions in an if statement (see R0916). |
| max-bool-expr=5 |
| |
| # Maximum number of branch for function / method body. |
| max-branches=25 |
| |
| # Maximum number of locals for function / method body. |
| max-locals=25 |
| |
| # Maximum number of parents for a class (see R0901). |
| max-parents=7 |
| |
| # Maximum number of public methods for a class (see R0904). |
| max-public-methods=25 |
| |
| # Maximum number of return / yield for function / method body. |
| max-returns=10 |
| |
| # Maximum number of statements in function / method body. |
| max-statements=100 |
| |
| # Minimum number of public methods for a class (see R0903). |
| min-public-methods=0 |
| |
| |
| [CLASSES] |
| |
| # List of method names used to declare (i.e. assign) instance attributes. |
| defining-attr-methods=__init__, |
| __new__, |
| setUp, |
| __post_init__ |
| |
| # List of member names, which should be excluded from the protected access |
| # warning. |
| exclude-protected=_asdict, |
| _fields, |
| _replace, |
| _source, |
| _make |
| |
| # List of valid names for the first argument in a class method. |
| valid-classmethod-first-arg=cls |
| |
| # List of valid names for the first argument in a metaclass class method. |
| valid-metaclass-classmethod-first-arg=cls |
| |
| |
| [IMPORTS] |
| |
| # List of modules that can be imported at any level, not just the top level |
| # one. |
| allow-any-import-level= |
| |
| # Allow wildcard imports from modules that define __all__. |
| allow-wildcard-with-all=no |
| |
| # Analyse import fallback blocks. This can be used to support both Python 2 and |
| # 3 compatible code, which means that the block might have code that exists |
| # only in one or another interpreter, leading to false positives when analysed. |
| analyse-fallback-blocks=no |
| |
| # Deprecated modules which should not be used, separated by a comma. |
| deprecated-modules=optparse,tkinter.tix |
| |
| # Create a graph of external dependencies in the given file (report RP0402 must |
| # not be disabled). |
| ext-import-graph= |
| |
| # Create a graph of every (i.e. internal and external) dependencies in the |
| # given file (report RP0402 must not be disabled). |
| import-graph= |
| |
| # Create a graph of internal dependencies in the given file (report RP0402 must |
| # not be disabled). |
| int-import-graph= |
| |
| # Force import order to recognize a module as part of the standard |
| # compatibility libraries. |
| known-standard-library= |
| |
| # Force import order to recognize a module as part of a third party library. |
| known-third-party=enchant |
| |
| # Couples of modules and preferred modules, separated by a comma. |
| preferred-modules= |
| |
| |
| [EXCEPTIONS] |
| |
| # Exceptions that will emit a warning when being caught. Defaults to |
| # "BaseException, Exception". |
| overgeneral-exceptions=BaseException, |
| Exception |