| // Copyright 2021 The Pigweed Authors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); you may not |
| // use this file except in compliance with the License. You may obtain a copy of |
| // the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| // WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| // License for the specific language governing permissions and limitations under |
| // the License. |
| |
| #include "pw_log_rpc/rpc_log_drain.h" |
| |
| #include <limits> |
| #include <mutex> |
| #include <optional> |
| #include <string_view> |
| |
| #include "pw_assert/check.h" |
| #include "pw_chrono/system_clock.h" |
| #include "pw_log/proto/log.pwpb.h" |
| #include "pw_result/result.h" |
| #include "pw_rpc/raw/server_reader_writer.h" |
| #include "pw_span/span.h" |
| #include "pw_status/status.h" |
| #include "pw_status/try.h" |
| |
| namespace pw::log_rpc { |
| namespace { |
| |
| // Creates an encoded drop message on the provided buffer and adds it to the |
| // bulk log entries. Resets the drop count when successfull. |
| void TryEncodeDropMessage(ByteSpan encoded_drop_message_buffer, |
| std::string_view reason, |
| uint32_t& drop_count, |
| log::LogEntries::MemoryEncoder& entries_encoder) { |
| // Encode drop count and reason, if any, in log proto. |
| log::LogEntry::MemoryEncoder encoder(encoded_drop_message_buffer); |
| if (!reason.empty()) { |
| encoder.WriteMessage(as_bytes(span<const char>(reason))).IgnoreError(); |
| } |
| encoder.WriteDropped(drop_count).IgnoreError(); |
| if (!encoder.status().ok()) { |
| return; |
| } |
| // Add encoded drop messsage if fits in buffer. |
| ConstByteSpan drop_message(encoder); |
| if (drop_message.size() + RpcLogDrain::kLogEntriesEncodeFrameSize < |
| entries_encoder.ConservativeWriteLimit()) { |
| PW_CHECK_OK(entries_encoder.WriteBytes( |
| static_cast<uint32_t>(log::LogEntries::Fields::ENTRIES), drop_message)); |
| drop_count = 0; |
| } |
| } |
| |
| } // namespace |
| |
| Status RpcLogDrain::Open(rpc::RawServerWriter& writer) { |
| if (!writer.active()) { |
| return Status::FailedPrecondition(); |
| } |
| std::lock_guard lock(mutex_); |
| if (server_writer_.active()) { |
| return Status::AlreadyExists(); |
| } |
| server_writer_ = std::move(writer); |
| if (on_open_callback_ != nullptr) { |
| on_open_callback_(); |
| } |
| return OkStatus(); |
| } |
| |
| Status RpcLogDrain::Flush(ByteSpan encoding_buffer) { |
| Status status; |
| SendLogs(std::numeric_limits<size_t>::max(), encoding_buffer, status); |
| return status; |
| } |
| |
| std::optional<chrono::SystemClock::duration> RpcLogDrain::Trickle( |
| ByteSpan encoding_buffer) { |
| chrono::SystemClock::time_point now = chrono::SystemClock::now(); |
| // Called before drain is ready to send more logs. Ignore this request and |
| // remind the caller how much longer they'll need to wait. |
| if (no_writes_until_ > now) { |
| return no_writes_until_ - now; |
| } |
| |
| Status encoding_status; |
| if (SendLogs(max_bundles_per_trickle_, encoding_buffer, encoding_status) == |
| LogDrainState::kCaughtUp) { |
| return std::nullopt; |
| } |
| |
| no_writes_until_ = chrono::SystemClock::TimePointAfterAtLeast(trickle_delay_); |
| return trickle_delay_; |
| } |
| |
| RpcLogDrain::LogDrainState RpcLogDrain::SendLogs(size_t max_num_bundles, |
| ByteSpan encoding_buffer, |
| Status& encoding_status_out) { |
| PW_CHECK_NOTNULL(multisink_); |
| |
| LogDrainState log_sink_state = LogDrainState::kMoreEntriesRemaining; |
| std::lock_guard lock(mutex_); |
| size_t sent_bundle_count = 0; |
| while (sent_bundle_count < max_num_bundles && |
| log_sink_state != LogDrainState::kCaughtUp) { |
| if (!server_writer_.active()) { |
| encoding_status_out = Status::Unavailable(); |
| // No reason to keep polling this drain until the writer is opened. |
| return LogDrainState::kCaughtUp; |
| } |
| log::LogEntries::MemoryEncoder encoder(encoding_buffer); |
| uint32_t packed_entry_count = 0; |
| log_sink_state = EncodeOutgoingPacket(encoder, packed_entry_count); |
| |
| // Avoid sending empty packets. |
| if (encoder.size() == 0) { |
| continue; |
| } |
| |
| encoder.WriteFirstEntrySequenceId(sequence_id_) |
| .IgnoreError(); // TODO(b/242598609): Handle Status properly |
| sequence_id_ += packed_entry_count; |
| const Status status = server_writer_.Write(encoder); |
| sent_bundle_count++; |
| |
| if (!status.ok() && |
| error_handling_ == LogDrainErrorHandling::kCloseStreamOnWriterError) { |
| // Only update this drop count when writer errors are not ignored. |
| drop_count_writer_error_ += packed_entry_count; |
| server_writer_.Finish().IgnoreError(); |
| encoding_status_out = Status::Aborted(); |
| return log_sink_state; |
| } |
| } |
| return log_sink_state; |
| } |
| |
| RpcLogDrain::LogDrainState RpcLogDrain::EncodeOutgoingPacket( |
| log::LogEntries::MemoryEncoder& encoder, uint32_t& packed_entry_count_out) { |
| const size_t total_buffer_size = encoder.ConservativeWriteLimit(); |
| do { |
| // Peek entry and get drop count from multisink. |
| uint32_t drop_count = 0; |
| uint32_t ingress_drop_count = 0; |
| Result<multisink::MultiSink::Drain::PeekedEntry> possible_entry = |
| PeekEntry(log_entry_buffer_, drop_count, ingress_drop_count); |
| drop_count_ingress_error_ += ingress_drop_count; |
| |
| // Check if the entry fits in the entry buffer. |
| if (possible_entry.status().IsResourceExhausted()) { |
| ++drop_count_small_stack_buffer_; |
| continue; |
| } |
| |
| // Check if there are any entries left. |
| if (possible_entry.status().IsOutOfRange()) { |
| // Stash multisink's reported drop count that will be reported later with |
| // any other drop counts. |
| drop_count_slow_drain_ += drop_count; |
| return LogDrainState::kCaughtUp; // There are no more entries. |
| } |
| |
| // At this point all expected errors have been handled. |
| PW_CHECK_OK(possible_entry.status()); |
| |
| // Check if the entry passes any set filter rules. |
| if (filter_ != nullptr && |
| filter_->ShouldDropLog(possible_entry.value().entry())) { |
| // Add the drop count from the multisink peek, stored in `drop_count`, to |
| // the total drop count. Then drop the entry without counting it towards |
| // the total drop count. Drops will be reported later all together. |
| drop_count_slow_drain_ += drop_count; |
| PW_CHECK_OK(PopEntry(possible_entry.value())); |
| continue; |
| } |
| |
| // Check if the entry fits in the encoder buffer by itself. |
| const size_t encoded_entry_size = |
| possible_entry.value().entry().size() + kLogEntriesEncodeFrameSize; |
| if (encoded_entry_size + kLogEntriesEncodeFrameSize > total_buffer_size) { |
| // Entry is larger than the entire available buffer. |
| ++drop_count_small_outbound_buffer_; |
| PW_CHECK_OK(PopEntry(possible_entry.value())); |
| continue; |
| } |
| |
| // At this point, we have a valid entry that may fit in the encode buffer. |
| // Report any drop counts combined reusing the log_entry_buffer_ to encode a |
| // drop message. |
| drop_count_slow_drain_ += drop_count; |
| // Account for dropped entries too large for stack buffer, which PeekEntry() |
| // also reports. |
| drop_count_slow_drain_ -= drop_count_small_stack_buffer_; |
| bool log_entry_buffer_has_valid_entry = possible_entry.ok(); |
| if (drop_count_slow_drain_ > 0) { |
| TryEncodeDropMessage(log_entry_buffer_, |
| std::string_view(kSlowDrainErrorMessage), |
| drop_count_slow_drain_, |
| encoder); |
| log_entry_buffer_has_valid_entry = false; |
| } |
| if (drop_count_ingress_error_ > 0) { |
| TryEncodeDropMessage(log_entry_buffer_, |
| std::string_view(kIngressErrorMessage), |
| drop_count_ingress_error_, |
| encoder); |
| log_entry_buffer_has_valid_entry = false; |
| } |
| if (drop_count_small_stack_buffer_ > 0) { |
| TryEncodeDropMessage(log_entry_buffer_, |
| std::string_view(kSmallStackBufferErrorMessage), |
| drop_count_small_stack_buffer_, |
| encoder); |
| log_entry_buffer_has_valid_entry = false; |
| } |
| if (drop_count_small_outbound_buffer_ > 0) { |
| TryEncodeDropMessage(log_entry_buffer_, |
| std::string_view(kSmallOutboundBufferErrorMessage), |
| drop_count_small_outbound_buffer_, |
| encoder); |
| log_entry_buffer_has_valid_entry = false; |
| } |
| if (drop_count_writer_error_ > 0) { |
| TryEncodeDropMessage(log_entry_buffer_, |
| std::string_view(kWriterErrorMessage), |
| drop_count_writer_error_, |
| encoder); |
| log_entry_buffer_has_valid_entry = false; |
| } |
| if (possible_entry.ok() && !log_entry_buffer_has_valid_entry) { |
| PW_CHECK_OK(PeekEntry(log_entry_buffer_, drop_count, ingress_drop_count) |
| .status()); |
| } |
| |
| // Check if the entry fits in the partially filled encoder buffer. |
| if (encoded_entry_size > encoder.ConservativeWriteLimit()) { |
| // Notify the caller there are more entries to send. |
| return LogDrainState::kMoreEntriesRemaining; |
| } |
| |
| // Encode the entry and remove it from multisink. |
| PW_CHECK_OK(encoder.WriteBytes( |
| static_cast<uint32_t>(log::LogEntries::Fields::ENTRIES), |
| possible_entry.value().entry())); |
| PW_CHECK_OK(PopEntry(possible_entry.value())); |
| ++packed_entry_count_out; |
| } while (true); |
| } |
| |
| Status RpcLogDrain::Close() { |
| std::lock_guard lock(mutex_); |
| return server_writer_.Finish(); |
| } |
| |
| } // namespace pw::log_rpc |