Clone this repo:

Branches

  1. 8ec9c64 github: Add basic on-push workflow by Rob Mohr · 6 months ago main
  2. 63abe91 [third_party/pigweed] Roll 2 commits by pigweed-roller · 6 months ago
  3. cd53970 Update requirements_lock.txt by Rob Mohr · 6 months ago
  4. 0121807 [roll third_party/pigweed] pw_stream_uart_mcuxpresso: Add interrupt safe write-only uart stream by Austin Foxley · 6 months ago
  5. 70a80c8 [roll third_party/pigweed] npm: Update package-lock.json by Armando Montanez · 6 months ago

Pigweed: minimal Bazel example

This repository contains a minimal example of a Bazel-based Pigweed project. It's an echo application for the STM32F429 Discovery Board.

Cloning

git clone --recursive https://pigweed.googlesource.com/pigweed/quickstart/bazel

If you already cloned but forgot to include --recursive, run git submodule update --init to pull all submodules.

TODO: b/300695111 - Don't require submodules for this example.

Building

We‘ll assume you already have Bazel on your system. If you don’t, the recommended way to get it is through Bazelisk.

To build the entire project (including building the application for both the host and the STM32 Discovery Board), run

bazel build //...

To run the application locally on your machine, run,

bazel run //src:echo

Flashing

To flash the firmware to a STM32F429 Discovery Board connected to your machine, run,

bazel run //tools:flash

Note that you don't need to build the firmware first: Bazel knows that the firmware images are needed to flash the board, and will build them for you. And if you edit the source of the firmware or any of its dependencies, it will get rebuilt when you flash.

Communicating

Run,

bazel run //tools:miniterm -- /dev/ttyACM0 --filter=debug

to communicate with the board. When you transmit a character, you should get the same character back!