| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). */ |
| |
| #include <assert.h> |
| #include <limits.h> |
| #include <stdio.h> |
| #include <string.h> |
| |
| #include <openssl/buf.h> |
| #include <openssl/err.h> |
| #include <openssl/evp.h> |
| #include <openssl/mem.h> |
| #include <openssl/rand.h> |
| |
| #include "internal.h" |
| |
| |
| static int do_ssl3_write(SSL *s, int type, const uint8_t *buf, unsigned int len, |
| char fragment); |
| static int ssl3_get_record(SSL *s); |
| |
| int ssl3_read_n(SSL *s, int n, int extend) { |
| /* If |extend| is 0, obtain new n-byte packet; |
| * if |extend| is 1, increase packet by another n bytes. |
| * |
| * The packet will be in the sub-array of |s->s3->rbuf.buf| specified by |
| * |s->packet| and |s->packet_length|. (If |s->read_ahead| is set and |extend| |
| * is 0, additional bytes may be read into |rbuf|, up to the size of the |
| * buffer.) */ |
| int i, len, left; |
| uintptr_t align = 0; |
| uint8_t *pkt; |
| SSL3_BUFFER *rb; |
| |
| if (n <= 0) { |
| return n; |
| } |
| |
| rb = &s->s3->rbuf; |
| if (rb->buf == NULL && !ssl3_setup_read_buffer(s)) { |
| return -1; |
| } |
| |
| left = rb->left; |
| |
| align = (uintptr_t)rb->buf + SSL3_RT_HEADER_LENGTH; |
| align = (0 - align) & (SSL3_ALIGN_PAYLOAD - 1); |
| |
| if (!extend) { |
| /* start with empty packet ... */ |
| if (left == 0) { |
| rb->offset = align; |
| } else if (align != 0 && left >= SSL3_RT_HEADER_LENGTH) { |
| /* check if next packet length is large enough to justify payload |
| * alignment... */ |
| pkt = rb->buf + rb->offset; |
| if (pkt[0] == SSL3_RT_APPLICATION_DATA && (pkt[3] << 8 | pkt[4]) >= 128) { |
| /* Note that even if packet is corrupted and its length field is |
| * insane, we can only be led to wrong decision about whether memmove |
| * will occur or not. Header values has no effect on memmove arguments |
| * and therefore no buffer overrun can be triggered. */ |
| memmove(rb->buf + align, pkt, left); |
| rb->offset = align; |
| } |
| } |
| s->packet = rb->buf + rb->offset; |
| s->packet_length = 0; |
| /* ... now we can act as if 'extend' was set */ |
| } |
| |
| /* For DTLS/UDP reads should not span multiple packets because the read |
| * operation returns the whole packet at once (as long as it fits into the |
| * buffer). */ |
| if (SSL_IS_DTLS(s) && left > 0 && n > left) { |
| n = left; |
| } |
| |
| /* if there is enough in the buffer from a previous read, take some */ |
| if (left >= n) { |
| s->packet_length += n; |
| rb->left = left - n; |
| rb->offset += n; |
| return n; |
| } |
| |
| /* else we need to read more data */ |
| |
| len = s->packet_length; |
| pkt = rb->buf + align; |
| /* Move any available bytes to front of buffer: |len| bytes already pointed |
| * to by |packet|, |left| extra ones at the end. */ |
| if (s->packet != pkt) { |
| /* len > 0 */ |
| memmove(pkt, s->packet, len + left); |
| s->packet = pkt; |
| rb->offset = len + align; |
| } |
| |
| if (n > (int)(rb->len - rb->offset)) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_n, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| |
| int max = n; |
| if (s->read_ahead && !extend) { |
| max = rb->len - rb->offset; |
| } |
| |
| while (left < n) { |
| /* Now we have len+left bytes at the front of s->s3->rbuf.buf and need to |
| * read in more until we have len+n (up to len+max if possible). */ |
| ERR_clear_system_error(); |
| if (s->rbio != NULL) { |
| s->rwstate = SSL_READING; |
| i = BIO_read(s->rbio, pkt + len + left, max - left); |
| } else { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_n, SSL_R_READ_BIO_NOT_SET); |
| i = -1; |
| } |
| |
| if (i <= 0) { |
| rb->left = left; |
| if (len + left == 0) { |
| ssl3_release_read_buffer(s); |
| } |
| return i; |
| } |
| left += i; |
| /* reads should *never* span multiple packets for DTLS because the |
| * underlying transport protocol is message oriented as opposed to byte |
| * oriented as in the TLS case. */ |
| if (SSL_IS_DTLS(s) && n > left) { |
| n = left; /* makes the while condition false */ |
| } |
| } |
| |
| /* done reading, now the book-keeping */ |
| rb->offset += n; |
| rb->left = left - n; |
| s->packet_length += n; |
| s->rwstate = SSL_NOTHING; |
| |
| return n; |
| } |
| |
| /* MAX_EMPTY_RECORDS defines the number of consecutive, empty records that will |
| * be processed per call to ssl3_get_record. Without this limit an attacker |
| * could send empty records at a faster rate than we can process and cause |
| * ssl3_get_record to loop forever. */ |
| #define MAX_EMPTY_RECORDS 32 |
| |
| /* Call this to get a new input record. It will return <= 0 if more data is |
| * needed, normally due to an error or non-blocking IO. When it finishes, one |
| * packet has been decoded and can be found in |
| * ssl->s3->rrec.type - is the type of record |
| * ssl->s3->rrec.data - data |
| * ssl->s3->rrec.length - number of bytes */ |
| /* used only by ssl3_read_bytes */ |
| static int ssl3_get_record(SSL *s) { |
| int ssl_major, ssl_minor, al; |
| int n, i, ret = -1; |
| SSL3_RECORD *rr; |
| uint8_t *p; |
| short version; |
| size_t extra; |
| unsigned empty_record_count = 0; |
| |
| rr = &s->s3->rrec; |
| |
| if (s->options & SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER) { |
| extra = SSL3_RT_MAX_EXTRA; |
| } else { |
| extra = 0; |
| } |
| |
| if (extra && !s->s3->init_extra) { |
| /* An application error: SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER set after |
| * ssl3_setup_buffers() was done */ |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| |
| again: |
| /* check if we have the header */ |
| if (s->rstate != SSL_ST_READ_BODY || |
| s->packet_length < SSL3_RT_HEADER_LENGTH) { |
| n = ssl3_read_n(s, SSL3_RT_HEADER_LENGTH, 0); |
| if (n <= 0) { |
| return n; /* error or non-blocking */ |
| } |
| s->rstate = SSL_ST_READ_BODY; |
| |
| p = s->packet; |
| if (s->msg_callback) { |
| s->msg_callback(0, 0, SSL3_RT_HEADER, p, 5, s, s->msg_callback_arg); |
| } |
| |
| /* Pull apart the header into the SSL3_RECORD */ |
| rr->type = *(p++); |
| ssl_major = *(p++); |
| ssl_minor = *(p++); |
| version = (ssl_major << 8) | ssl_minor; |
| n2s(p, rr->length); |
| |
| if (s->s3->have_version && version != s->version) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, SSL_R_WRONG_VERSION_NUMBER); |
| al = SSL_AD_PROTOCOL_VERSION; |
| goto f_err; |
| } |
| |
| if ((version >> 8) != SSL3_VERSION_MAJOR) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, SSL_R_WRONG_VERSION_NUMBER); |
| goto err; |
| } |
| |
| if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH + extra) { |
| al = SSL_AD_RECORD_OVERFLOW; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, SSL_R_ENCRYPTED_LENGTH_TOO_LONG); |
| goto f_err; |
| } |
| |
| /* now s->rstate == SSL_ST_READ_BODY */ |
| } |
| |
| /* s->rstate == SSL_ST_READ_BODY, get and decode the data */ |
| |
| if (rr->length > s->packet_length - SSL3_RT_HEADER_LENGTH) { |
| /* now s->packet_length == SSL3_RT_HEADER_LENGTH */ |
| i = rr->length; |
| n = ssl3_read_n(s, i, 1); |
| if (n <= 0) { |
| /* Error or non-blocking IO. Now |n| == |rr->length|, and |
| * |s->packet_length| == |SSL3_RT_HEADER_LENGTH| + |rr->length|. */ |
| return n; |
| } |
| } |
| |
| s->rstate = SSL_ST_READ_HEADER; /* set state for later operations */ |
| |
| /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length, and |
| * we have that many bytes in s->packet. */ |
| rr->input = &s->packet[SSL3_RT_HEADER_LENGTH]; |
| |
| /* ok, we can now read from |s->packet| data into |rr|. |rr->input| points at |
| * |rr->length| bytes, which need to be copied into |rr->data| by decryption. |
| * When the data is 'copied' into the |rr->data| buffer, |rr->input| will be |
| * pointed at the new buffer. */ |
| |
| /* We now have - encrypted [ MAC [ compressed [ plain ] ] ] |
| * rr->length bytes of encrypted compressed stuff. */ |
| |
| /* decrypt in place in 'rr->input' */ |
| rr->data = rr->input; |
| |
| if (!s->enc_method->enc(s, 0)) { |
| al = SSL_AD_BAD_RECORD_MAC; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, |
| SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC); |
| goto f_err; |
| } |
| |
| if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH + extra) { |
| al = SSL_AD_RECORD_OVERFLOW; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, SSL_R_DATA_LENGTH_TOO_LONG); |
| goto f_err; |
| } |
| |
| rr->off = 0; |
| /* So at this point the following is true: |
| * ssl->s3->rrec.type is the type of record; |
| * ssl->s3->rrec.length is the number of bytes in the record; |
| * ssl->s3->rrec.off is the offset to first valid byte; |
| * ssl->s3->rrec.data is where to take bytes from (increment after use). */ |
| |
| /* we have pulled in a full packet so zero things */ |
| s->packet_length = 0; |
| |
| /* just read a 0 length packet */ |
| if (rr->length == 0) { |
| empty_record_count++; |
| if (empty_record_count > MAX_EMPTY_RECORDS) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_get_record, SSL_R_TOO_MANY_EMPTY_FRAGMENTS); |
| goto f_err; |
| } |
| goto again; |
| } |
| |
| return 1; |
| |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| err: |
| return ret; |
| } |
| |
| /* Call this to write data in records of type |type|. It will return <= 0 if |
| * not all data has been sent or non-blocking IO. */ |
| int ssl3_write_bytes(SSL *s, int type, const void *buf_, int len) { |
| const uint8_t *buf = buf_; |
| unsigned int tot, n, nw; |
| int i; |
| |
| s->rwstate = SSL_NOTHING; |
| assert(s->s3->wnum <= INT_MAX); |
| tot = s->s3->wnum; |
| s->s3->wnum = 0; |
| |
| if (!s->in_handshake && SSL_in_init(s) && !SSL_in_false_start(s)) { |
| i = s->handshake_func(s); |
| if (i < 0) { |
| return i; |
| } |
| if (i == 0) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_write_bytes, SSL_R_SSL_HANDSHAKE_FAILURE); |
| return -1; |
| } |
| } |
| |
| /* Ensure that if we end up with a smaller value of data to write out than |
| * the the original len from a write which didn't complete for non-blocking |
| * I/O and also somehow ended up avoiding the check for this in |
| * ssl3_write_pending/SSL_R_BAD_WRITE_RETRY as it must never be possible to |
| * end up with (len-tot) as a large number that will then promptly send |
| * beyond the end of the users buffer ... so we trap and report the error in |
| * a way the user will notice. */ |
| if (len < 0 || (size_t)len < tot) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_write_bytes, SSL_R_BAD_LENGTH); |
| return -1; |
| } |
| |
| int record_split_done = 0; |
| n = (len - tot); |
| for (;;) { |
| /* max contains the maximum number of bytes that we can put into a |
| * record. */ |
| unsigned max = s->max_send_fragment; |
| /* fragment is true if do_ssl3_write should send the first byte in its own |
| * record in order to randomise a CBC IV. */ |
| int fragment = 0; |
| if (!record_split_done && s->s3->need_record_splitting && |
| type == SSL3_RT_APPLICATION_DATA) { |
| /* Only the the first record per write call needs to be split. The |
| * remaining plaintext was determined before the IV was randomized. */ |
| fragment = 1; |
| record_split_done = 1; |
| } |
| if (n > max) { |
| nw = max; |
| } else { |
| nw = n; |
| } |
| |
| i = do_ssl3_write(s, type, &buf[tot], nw, fragment); |
| if (i <= 0) { |
| s->s3->wnum = tot; |
| return i; |
| } |
| |
| if (i == (int)n || (type == SSL3_RT_APPLICATION_DATA && |
| (s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))) { |
| return tot + i; |
| } |
| |
| n -= i; |
| tot += i; |
| } |
| } |
| |
| /* ssl3_seal_record seals a new record of type |type| and plaintext |in| and |
| * writes it to |out|. At most |max_out| bytes will be written. It returns one |
| * on success and zero on error. On success, |s->s3->wrec| is updated to include |
| * the new record. */ |
| static int ssl3_seal_record(SSL *s, uint8_t *out, size_t *out_len, |
| size_t max_out, uint8_t type, const uint8_t *in, |
| size_t in_len) { |
| if (max_out < SSL3_RT_HEADER_LENGTH) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_seal_record, SSL_R_BUFFER_TOO_SMALL); |
| return 0; |
| } |
| |
| out[0] = type; |
| |
| /* Some servers hang if initial ClientHello is larger than 256 bytes and |
| * record version number > TLS 1.0. */ |
| if (!s->s3->have_version && s->version > SSL3_VERSION) { |
| out[1] = TLS1_VERSION >> 8; |
| out[2] = TLS1_VERSION & 0xff; |
| } else { |
| out[1] = s->version >> 8; |
| out[2] = s->version & 0xff; |
| } |
| |
| size_t explicit_nonce_len = 0; |
| if (s->aead_write_ctx != NULL && |
| s->aead_write_ctx->variable_nonce_included_in_record) { |
| explicit_nonce_len = s->aead_write_ctx->variable_nonce_len; |
| } |
| size_t max_overhead = 0; |
| if (s->aead_write_ctx != NULL) { |
| max_overhead = s->aead_write_ctx->tag_len; |
| } |
| |
| /* Assemble the input for |s->enc_method->enc|. The input is the plaintext |
| * with |explicit_nonce_len| bytes of space prepended for the explicit |
| * nonce. The input is copied into |out| and then encrypted in-place to take |
| * advantage of alignment. |
| * |
| * TODO(davidben): |tls1_enc| should accept its inputs and outputs directly |
| * rather than looking up in |wrec| and friends. The |max_overhead| bounds |
| * check would also be unnecessary if |max_out| were passed down. */ |
| SSL3_RECORD *wr = &s->s3->wrec; |
| size_t plaintext_len = in_len + explicit_nonce_len; |
| if (plaintext_len < in_len || plaintext_len > INT_MAX || |
| plaintext_len + max_overhead < plaintext_len) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_seal_record, ERR_R_OVERFLOW); |
| return 0; |
| } |
| if (max_out - SSL3_RT_HEADER_LENGTH < plaintext_len + max_overhead) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_seal_record, SSL_R_BUFFER_TOO_SMALL); |
| return 0; |
| } |
| wr->type = type; |
| wr->input = out + SSL3_RT_HEADER_LENGTH; |
| wr->data = wr->input; |
| wr->length = plaintext_len; |
| memcpy(wr->input + explicit_nonce_len, in, in_len); |
| |
| if (!s->enc_method->enc(s, 1)) { |
| return 0; |
| } |
| |
| /* |wr->length| has now been set to the ciphertext length. */ |
| if (wr->length >= 1 << 16) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_seal_record, ERR_R_OVERFLOW); |
| return 0; |
| } |
| out[3] = wr->length >> 8; |
| out[4] = wr->length & 0xff; |
| *out_len = SSL3_RT_HEADER_LENGTH + (size_t)wr->length; |
| |
| if (s->msg_callback) { |
| s->msg_callback(1 /* write */, 0, SSL3_RT_HEADER, out, SSL3_RT_HEADER_LENGTH, |
| s, s->msg_callback_arg); |
| } |
| |
| return 1; |
| } |
| |
| /* do_ssl3_write writes an SSL record of the given type. If |fragment| is 1 |
| * then it splits the record into a one byte record and a record with the rest |
| * of the data in order to randomise a CBC IV. */ |
| static int do_ssl3_write(SSL *s, int type, const uint8_t *buf, unsigned int len, |
| char fragment) { |
| SSL3_BUFFER *wb = &s->s3->wbuf; |
| |
| /* first check if there is a SSL3_BUFFER still being written out. This will |
| * happen with non blocking IO */ |
| if (wb->left != 0) { |
| return ssl3_write_pending(s, type, buf, len); |
| } |
| |
| /* If we have an alert to send, lets send it */ |
| if (s->s3->alert_dispatch) { |
| int ret = s->method->ssl_dispatch_alert(s); |
| if (ret <= 0) { |
| return ret; |
| } |
| /* if it went, fall through and send more stuff */ |
| } |
| |
| if (wb->buf == NULL && !ssl3_setup_write_buffer(s)) { |
| return -1; |
| } |
| |
| if (len == 0) { |
| return 0; |
| } |
| if (len == 1) { |
| /* No sense in fragmenting a one-byte record. */ |
| fragment = 0; |
| } |
| |
| /* Align the output so the ciphertext is aligned to |SSL3_ALIGN_PAYLOAD|. */ |
| uintptr_t align; |
| if (fragment) { |
| /* Only CBC-mode ciphers require fragmenting. CBC-mode ciphertext is a |
| * multiple of the block size which we may assume is aligned. Thus we only |
| * need to account for a second copy of the record header. */ |
| align = (uintptr_t)wb->buf + 2 * SSL3_RT_HEADER_LENGTH; |
| } else { |
| align = (uintptr_t)wb->buf + SSL3_RT_HEADER_LENGTH; |
| } |
| align = (0 - align) & (SSL3_ALIGN_PAYLOAD - 1); |
| uint8_t *out = wb->buf + align; |
| wb->offset = align; |
| size_t max_out = wb->len - wb->offset; |
| |
| const uint8_t *orig_buf = buf; |
| unsigned int orig_len = len; |
| size_t fragment_len = 0; |
| if (fragment) { |
| /* Write the first byte in its own record as a countermeasure against |
| * known-IV weaknesses in CBC ciphersuites. (See |
| * http://www.openssl.org/~bodo/tls-cbc.txt.) */ |
| if (!ssl3_seal_record(s, out, &fragment_len, max_out, type, buf, 1)) { |
| return -1; |
| } |
| out += fragment_len; |
| max_out -= fragment_len; |
| buf++; |
| len--; |
| } |
| |
| assert((((uintptr_t)out + SSL3_RT_HEADER_LENGTH) & (SSL3_ALIGN_PAYLOAD - 1)) |
| == 0); |
| size_t ciphertext_len; |
| if (!ssl3_seal_record(s, out, &ciphertext_len, max_out, type, buf, len)) { |
| return -1; |
| } |
| ciphertext_len += fragment_len; |
| |
| /* now let's set up wb */ |
| wb->left = ciphertext_len; |
| |
| /* memorize arguments so that ssl3_write_pending can detect bad write retries |
| * later */ |
| s->s3->wpend_tot = orig_len; |
| s->s3->wpend_buf = orig_buf; |
| s->s3->wpend_type = type; |
| s->s3->wpend_ret = orig_len; |
| |
| /* we now just need to write the buffer */ |
| return ssl3_write_pending(s, type, orig_buf, orig_len); |
| } |
| |
| /* if s->s3->wbuf.left != 0, we need to call this */ |
| int ssl3_write_pending(SSL *s, int type, const uint8_t *buf, unsigned int len) { |
| int i; |
| SSL3_BUFFER *wb = &(s->s3->wbuf); |
| |
| if (s->s3->wpend_tot > (int)len || |
| (s->s3->wpend_buf != buf && |
| !(s->mode & SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER)) || |
| s->s3->wpend_type != type) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_write_pending, SSL_R_BAD_WRITE_RETRY); |
| return -1; |
| } |
| |
| for (;;) { |
| ERR_clear_system_error(); |
| if (s->wbio != NULL) { |
| s->rwstate = SSL_WRITING; |
| i = BIO_write(s->wbio, (char *)&(wb->buf[wb->offset]), |
| (unsigned int)wb->left); |
| } else { |
| OPENSSL_PUT_ERROR(SSL, ssl3_write_pending, SSL_R_BIO_NOT_SET); |
| i = -1; |
| } |
| if (i == wb->left) { |
| wb->left = 0; |
| wb->offset += i; |
| ssl3_release_write_buffer(s); |
| s->rwstate = SSL_NOTHING; |
| return s->s3->wpend_ret; |
| } else if (i <= 0) { |
| if (SSL_IS_DTLS(s)) { |
| /* For DTLS, just drop it. That's kind of the whole point in |
| * using a datagram service */ |
| wb->left = 0; |
| } |
| return i; |
| } |
| /* TODO(davidben): This codepath is used in DTLS, but the write |
| * payload may not split across packets. */ |
| wb->offset += i; |
| wb->left -= i; |
| } |
| } |
| |
| /* ssl3_expect_change_cipher_spec informs the record layer that a |
| * ChangeCipherSpec record is required at this point. If a Handshake record is |
| * received before ChangeCipherSpec, the connection will fail. Moreover, if |
| * there are unprocessed handshake bytes, the handshake will also fail and the |
| * function returns zero. Otherwise, the function returns one. */ |
| int ssl3_expect_change_cipher_spec(SSL *s) { |
| if (s->s3->handshake_fragment_len > 0 || s->s3->tmp.reuse_message) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_expect_change_cipher_spec, |
| SSL_R_UNPROCESSED_HANDSHAKE_DATA); |
| return 0; |
| } |
| |
| s->s3->flags |= SSL3_FLAGS_EXPECT_CCS; |
| return 1; |
| } |
| |
| /* Return up to 'len' payload bytes received in 'type' records. |
| * 'type' is one of the following: |
| * |
| * - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us) |
| * - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us) |
| * - 0 (during a shutdown, no data has to be returned) |
| * |
| * If we don't have stored data to work from, read a SSL/TLS record first |
| * (possibly multiple records if we still don't have anything to return). |
| * |
| * This function must handle any surprises the peer may have for us, such as |
| * Alert records (e.g. close_notify), ChangeCipherSpec records (not really |
| * a surprise, but handled as if it were), or renegotiation requests. |
| * Also if record payloads contain fragments too small to process, we store |
| * them until there is enough for the respective protocol (the record protocol |
| * may use arbitrary fragmentation and even interleaving): |
| * Change cipher spec protocol |
| * just 1 byte needed, no need for keeping anything stored |
| * Alert protocol |
| * 2 bytes needed (AlertLevel, AlertDescription) |
| * Handshake protocol |
| * 4 bytes needed (HandshakeType, uint24 length) -- we just have |
| * to detect unexpected Client Hello and Hello Request messages |
| * here, anything else is handled by higher layers |
| * Application data protocol |
| * none of our business |
| */ |
| int ssl3_read_bytes(SSL *s, int type, uint8_t *buf, int len, int peek) { |
| int al, i, ret; |
| unsigned int n; |
| SSL3_RECORD *rr; |
| void (*cb)(const SSL *ssl, int type2, int val) = NULL; |
| |
| if ((type && type != SSL3_RT_APPLICATION_DATA && type != SSL3_RT_HANDSHAKE) || |
| (peek && type != SSL3_RT_APPLICATION_DATA)) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, ERR_R_INTERNAL_ERROR); |
| return -1; |
| } |
| |
| if (type == SSL3_RT_HANDSHAKE && s->s3->handshake_fragment_len > 0) { |
| /* (partially) satisfy request from storage */ |
| uint8_t *src = s->s3->handshake_fragment; |
| uint8_t *dst = buf; |
| unsigned int k; |
| |
| /* peek == 0 */ |
| n = 0; |
| while (len > 0 && s->s3->handshake_fragment_len > 0) { |
| *dst++ = *src++; |
| len--; |
| s->s3->handshake_fragment_len--; |
| n++; |
| } |
| /* move any remaining fragment bytes: */ |
| for (k = 0; k < s->s3->handshake_fragment_len; k++) { |
| s->s3->handshake_fragment[k] = *src++; |
| } |
| return n; |
| } |
| |
| /* Now s->s3->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */ |
| |
| /* This may require multiple iterations. False Start will cause |
| * |s->handshake_func| to signal success one step early, but the handshake |
| * must be completely finished before other modes are accepted. |
| * |
| * TODO(davidben): Move this check up to a higher level. */ |
| while (!s->in_handshake && SSL_in_init(s)) { |
| assert(type == SSL3_RT_APPLICATION_DATA); |
| i = s->handshake_func(s); |
| if (i < 0) { |
| return i; |
| } |
| if (i == 0) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_SSL_HANDSHAKE_FAILURE); |
| return -1; |
| } |
| } |
| |
| if (s->s3->rbuf.buf == NULL && !ssl3_setup_read_buffer(s)) { |
| /* TODO(davidben): Is this redundant with the calls in the handshake? */ |
| return -1; |
| } |
| |
| start: |
| s->rwstate = SSL_NOTHING; |
| |
| /* s->s3->rrec.type - is the type of record |
| * s->s3->rrec.data - data |
| * s->s3->rrec.off - offset into 'data' for next read |
| * s->s3->rrec.length - number of bytes. */ |
| rr = &s->s3->rrec; |
| |
| /* get new packet if necessary */ |
| if (rr->length == 0 || s->rstate == SSL_ST_READ_BODY) { |
| ret = ssl3_get_record(s); |
| if (ret <= 0) { |
| return ret; |
| } |
| } |
| |
| /* we now have a packet which can be read and processed */ |
| |
| /* |change_cipher_spec is set when we receive a ChangeCipherSpec and reset by |
| * ssl3_get_finished. */ |
| if (s->s3->change_cipher_spec && rr->type != SSL3_RT_HANDSHAKE && |
| rr->type != SSL3_RT_ALERT) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, |
| SSL_R_DATA_BETWEEN_CCS_AND_FINISHED); |
| goto f_err; |
| } |
| |
| /* If we are expecting a ChangeCipherSpec, it is illegal to receive a |
| * Handshake record. */ |
| if (rr->type == SSL3_RT_HANDSHAKE && (s->s3->flags & SSL3_FLAGS_EXPECT_CCS)) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_HANDSHAKE_RECORD_BEFORE_CCS); |
| goto f_err; |
| } |
| |
| /* If the other end has shut down, throw anything we read away (even in |
| * 'peek' mode) */ |
| if (s->shutdown & SSL_RECEIVED_SHUTDOWN) { |
| rr->length = 0; |
| s->rwstate = SSL_NOTHING; |
| return 0; |
| } |
| |
| if (type == rr->type) { |
| /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */ |
| /* make sure that we are not getting application data when we are doing a |
| * handshake for the first time */ |
| if (SSL_in_init(s) && type == SSL3_RT_APPLICATION_DATA && |
| s->aead_read_ctx == NULL) { |
| /* TODO(davidben): Is this check redundant with the handshake_func |
| * check? */ |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_APP_DATA_IN_HANDSHAKE); |
| goto f_err; |
| } |
| |
| if (len <= 0) { |
| return len; |
| } |
| |
| if ((unsigned int)len > rr->length) { |
| n = rr->length; |
| } else { |
| n = (unsigned int)len; |
| } |
| |
| memcpy(buf, &(rr->data[rr->off]), n); |
| if (!peek) { |
| rr->length -= n; |
| rr->off += n; |
| if (rr->length == 0) { |
| s->rstate = SSL_ST_READ_HEADER; |
| rr->off = 0; |
| if (s->s3->rbuf.left == 0) { |
| ssl3_release_read_buffer(s); |
| } |
| } |
| } |
| |
| return n; |
| } |
| |
| |
| /* If we get here, then type != rr->type; if we have a handshake message, |
| * then it was unexpected (Hello Request or Client Hello). */ |
| |
| /* In case of record types for which we have 'fragment' storage, fill that so |
| * that we can process the data at a fixed place. */ |
| |
| if (rr->type == SSL3_RT_HANDSHAKE) { |
| /* If peer renegotiations are disabled, all out-of-order handshake records |
| * are fatal. */ |
| if (s->reject_peer_renegotiations) { |
| al = SSL_AD_NO_RENEGOTIATION; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_NO_RENEGOTIATION); |
| goto f_err; |
| } |
| |
| const size_t size = sizeof(s->s3->handshake_fragment); |
| const size_t avail = size - s->s3->handshake_fragment_len; |
| const size_t todo = (rr->length < avail) ? rr->length : avail; |
| memcpy(s->s3->handshake_fragment + s->s3->handshake_fragment_len, |
| &rr->data[rr->off], todo); |
| rr->off += todo; |
| rr->length -= todo; |
| s->s3->handshake_fragment_len += todo; |
| if (s->s3->handshake_fragment_len < size) { |
| goto start; /* fragment was too small */ |
| } |
| } |
| |
| /* s->s3->handshake_fragment_len == 4 iff rr->type == SSL3_RT_HANDSHAKE; |
| * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */ |
| |
| /* If we are a client, check for an incoming 'Hello Request': */ |
| if (!s->server && s->s3->handshake_fragment_len >= 4 && |
| s->s3->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST && |
| s->session != NULL && s->session->cipher != NULL) { |
| s->s3->handshake_fragment_len = 0; |
| |
| if (s->s3->handshake_fragment[1] != 0 || |
| s->s3->handshake_fragment[2] != 0 || |
| s->s3->handshake_fragment[3] != 0) { |
| al = SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_BAD_HELLO_REQUEST); |
| goto f_err; |
| } |
| |
| if (s->msg_callback) { |
| s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, |
| s->s3->handshake_fragment, 4, s, s->msg_callback_arg); |
| } |
| |
| if (SSL_is_init_finished(s) && !s->s3->renegotiate) { |
| ssl3_renegotiate(s); |
| if (ssl3_renegotiate_check(s)) { |
| i = s->handshake_func(s); |
| if (i < 0) { |
| return i; |
| } |
| if (i == 0) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_SSL_HANDSHAKE_FAILURE); |
| return -1; |
| } |
| } |
| } |
| /* we either finished a handshake or ignored the request, now try again to |
| * obtain the (application) data we were asked for */ |
| goto start; |
| } |
| |
| /* If an alert record, process one alert out of the record. Note that we allow |
| * a single record to contain multiple alerts. */ |
| if (rr->type == SSL3_RT_ALERT) { |
| /* Alerts may not be fragmented. */ |
| if (rr->length < 2) { |
| al = SSL_AD_DECODE_ERROR; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_BAD_ALERT); |
| goto f_err; |
| } |
| |
| if (s->msg_callback) { |
| s->msg_callback(0, s->version, SSL3_RT_ALERT, &rr->data[rr->off], 2, s, |
| s->msg_callback_arg); |
| } |
| const uint8_t alert_level = rr->data[rr->off++]; |
| const uint8_t alert_descr = rr->data[rr->off++]; |
| rr->length -= 2; |
| |
| if (s->info_callback != NULL) { |
| cb = s->info_callback; |
| } else if (s->ctx->info_callback != NULL) { |
| cb = s->ctx->info_callback; |
| } |
| |
| if (cb != NULL) { |
| uint16_t alert = (alert_level << 8) | alert_descr; |
| cb(s, SSL_CB_READ_ALERT, alert); |
| } |
| |
| if (alert_level == SSL3_AL_WARNING) { |
| s->s3->warn_alert = alert_descr; |
| if (alert_descr == SSL_AD_CLOSE_NOTIFY) { |
| s->shutdown |= SSL_RECEIVED_SHUTDOWN; |
| return 0; |
| } |
| |
| /* This is a warning but we receive it if we requested renegotiation and |
| * the peer denied it. Terminate with a fatal alert because if |
| * application tried to renegotiatie it presumably had a good reason and |
| * expects it to succeed. |
| * |
| * In future we might have a renegotiation where we don't care if the |
| * peer refused it where we carry on. */ |
| else if (alert_descr == SSL_AD_NO_RENEGOTIATION) { |
| al = SSL_AD_HANDSHAKE_FAILURE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_NO_RENEGOTIATION); |
| goto f_err; |
| } |
| } else if (alert_level == SSL3_AL_FATAL) { |
| char tmp[16]; |
| |
| s->rwstate = SSL_NOTHING; |
| s->s3->fatal_alert = alert_descr; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, |
| SSL_AD_REASON_OFFSET + alert_descr); |
| BIO_snprintf(tmp, sizeof(tmp), "%d", alert_descr); |
| ERR_add_error_data(2, "SSL alert number ", tmp); |
| s->shutdown |= SSL_RECEIVED_SHUTDOWN; |
| SSL_CTX_remove_session(s->ctx, s->session); |
| return 0; |
| } else { |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_UNKNOWN_ALERT_TYPE); |
| goto f_err; |
| } |
| |
| goto start; |
| } |
| |
| if (s->shutdown & SSL_SENT_SHUTDOWN) { |
| /* but we have not received a shutdown */ |
| s->rwstate = SSL_NOTHING; |
| rr->length = 0; |
| return 0; |
| } |
| |
| if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) { |
| /* 'Change Cipher Spec' is just a single byte, so we know exactly what the |
| * record payload has to look like */ |
| if (rr->length != 1 || rr->off != 0 || rr->data[0] != SSL3_MT_CCS) { |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_BAD_CHANGE_CIPHER_SPEC); |
| goto f_err; |
| } |
| |
| /* Check we have a cipher to change to */ |
| if (s->s3->tmp.new_cipher == NULL) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_CCS_RECEIVED_EARLY); |
| goto f_err; |
| } |
| |
| if (!(s->s3->flags & SSL3_FLAGS_EXPECT_CCS)) { |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_CCS_RECEIVED_EARLY); |
| goto f_err; |
| } |
| |
| s->s3->flags &= ~SSL3_FLAGS_EXPECT_CCS; |
| |
| rr->length = 0; |
| |
| if (s->msg_callback) { |
| s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data, 1, s, |
| s->msg_callback_arg); |
| } |
| |
| s->s3->change_cipher_spec = 1; |
| if (!ssl3_do_change_cipher_spec(s)) { |
| goto err; |
| } else { |
| goto start; |
| } |
| } |
| |
| /* Unexpected handshake message (Client Hello, or protocol violation) */ |
| if (s->s3->handshake_fragment_len >= 4 && !s->in_handshake) { |
| if ((s->state & SSL_ST_MASK) == SSL_ST_OK) { |
| s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT; |
| s->renegotiate = 1; |
| s->new_session = 1; |
| } |
| i = s->handshake_func(s); |
| if (i < 0) { |
| return i; |
| } |
| if (i == 0) { |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_SSL_HANDSHAKE_FAILURE); |
| return -1; |
| } |
| |
| goto start; |
| } |
| |
| /* We already handled these. */ |
| assert(rr->type != SSL3_RT_CHANGE_CIPHER_SPEC && rr->type != SSL3_RT_ALERT && |
| rr->type != SSL3_RT_HANDSHAKE); |
| |
| al = SSL_AD_UNEXPECTED_MESSAGE; |
| OPENSSL_PUT_ERROR(SSL, ssl3_read_bytes, SSL_R_UNEXPECTED_RECORD); |
| |
| f_err: |
| ssl3_send_alert(s, SSL3_AL_FATAL, al); |
| err: |
| return -1; |
| } |
| |
| int ssl3_do_change_cipher_spec(SSL *s) { |
| int i; |
| |
| if (s->state & SSL_ST_ACCEPT) { |
| i = SSL3_CHANGE_CIPHER_SERVER_READ; |
| } else { |
| i = SSL3_CHANGE_CIPHER_CLIENT_READ; |
| } |
| |
| if (s->s3->tmp.key_block == NULL) { |
| if (s->session == NULL || s->session->master_key_length == 0) { |
| /* might happen if dtls1_read_bytes() calls this */ |
| OPENSSL_PUT_ERROR(SSL, ssl3_do_change_cipher_spec, |
| SSL_R_CCS_RECEIVED_EARLY); |
| return 0; |
| } |
| |
| s->session->cipher = s->s3->tmp.new_cipher; |
| if (!s->enc_method->setup_key_block(s)) { |
| return 0; |
| } |
| } |
| |
| if (!s->enc_method->change_cipher_state(s, i)) { |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int ssl3_send_alert(SSL *s, int level, int desc) { |
| /* Map tls/ssl alert value to correct one */ |
| desc = s->enc_method->alert_value(desc); |
| if (s->version == SSL3_VERSION && desc == SSL_AD_PROTOCOL_VERSION) { |
| /* SSL 3.0 does not have protocol_version alerts */ |
| desc = SSL_AD_HANDSHAKE_FAILURE; |
| } |
| if (desc < 0) { |
| return -1; |
| } |
| |
| /* If a fatal one, remove from cache */ |
| if (level == 2 && s->session != NULL) { |
| SSL_CTX_remove_session(s->ctx, s->session); |
| } |
| |
| s->s3->alert_dispatch = 1; |
| s->s3->send_alert[0] = level; |
| s->s3->send_alert[1] = desc; |
| if (s->s3->wbuf.left == 0) { |
| /* data is still being written out. */ |
| return s->method->ssl_dispatch_alert(s); |
| } |
| |
| /* else data is still being written out, we will get written some time in the |
| * future */ |
| return -1; |
| } |
| |
| int ssl3_dispatch_alert(SSL *s) { |
| int i, j; |
| void (*cb)(const SSL *ssl, int type, int val) = NULL; |
| |
| s->s3->alert_dispatch = 0; |
| i = do_ssl3_write(s, SSL3_RT_ALERT, &s->s3->send_alert[0], 2, 0); |
| if (i <= 0) { |
| s->s3->alert_dispatch = 1; |
| } else { |
| /* Alert sent to BIO. If it is important, flush it now. If the message |
| * does not get sent due to non-blocking IO, we will not worry too much. */ |
| if (s->s3->send_alert[0] == SSL3_AL_FATAL) { |
| BIO_flush(s->wbio); |
| } |
| |
| if (s->msg_callback) { |
| s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, 2, s, |
| s->msg_callback_arg); |
| } |
| |
| if (s->info_callback != NULL) { |
| cb = s->info_callback; |
| } else if (s->ctx->info_callback != NULL) { |
| cb = s->ctx->info_callback; |
| } |
| |
| if (cb != NULL) { |
| j = (s->s3->send_alert[0] << 8) | s->s3->send_alert[1]; |
| cb(s, SSL_CB_WRITE_ALERT, j); |
| } |
| } |
| |
| return i; |
| } |