| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] */ |
| |
| #ifndef OPENSSL_HEADER_EVP_H |
| #define OPENSSL_HEADER_EVP_H |
| |
| #include <openssl/base.h> |
| |
| #include <openssl/thread.h> |
| |
| // OpenSSL included digest and cipher functions in this header so we include |
| // them for users that still expect that. |
| // |
| // TODO(fork): clean up callers so that they include what they use. |
| #include <openssl/aead.h> |
| #include <openssl/base64.h> |
| #include <openssl/cipher.h> |
| #include <openssl/digest.h> |
| #include <openssl/nid.h> |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| |
| // EVP abstracts over public/private key algorithms. |
| |
| |
| // Public key objects. |
| |
| // EVP_PKEY_new creates a new, empty public-key object and returns it or NULL |
| // on allocation failure. |
| OPENSSL_EXPORT EVP_PKEY *EVP_PKEY_new(void); |
| |
| // EVP_PKEY_free frees all data referenced by |pkey| and then frees |pkey| |
| // itself. |
| OPENSSL_EXPORT void EVP_PKEY_free(EVP_PKEY *pkey); |
| |
| // EVP_PKEY_up_ref increments the reference count of |pkey| and returns one. |
| OPENSSL_EXPORT int EVP_PKEY_up_ref(EVP_PKEY *pkey); |
| |
| // EVP_PKEY_is_opaque returns one if |pkey| is opaque. Opaque keys are backed by |
| // custom implementations which do not expose key material and parameters. It is |
| // an error to attempt to duplicate, export, or compare an opaque key. |
| OPENSSL_EXPORT int EVP_PKEY_is_opaque(const EVP_PKEY *pkey); |
| |
| // EVP_PKEY_cmp compares |a| and |b| and returns one if they are equal, zero if |
| // not and a negative number on error. |
| // |
| // WARNING: this differs from the traditional return value of a "cmp" |
| // function. |
| OPENSSL_EXPORT int EVP_PKEY_cmp(const EVP_PKEY *a, const EVP_PKEY *b); |
| |
| // EVP_PKEY_copy_parameters sets the parameters of |to| to equal the parameters |
| // of |from|. It returns one on success and zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_copy_parameters(EVP_PKEY *to, const EVP_PKEY *from); |
| |
| // EVP_PKEY_missing_parameters returns one if |pkey| is missing needed |
| // parameters or zero if not, or if the algorithm doesn't take parameters. |
| OPENSSL_EXPORT int EVP_PKEY_missing_parameters(const EVP_PKEY *pkey); |
| |
| // EVP_PKEY_size returns the maximum size, in bytes, of a signature signed by |
| // |pkey|. For an RSA key, this returns the number of bytes needed to represent |
| // the modulus. For an EC key, this returns the maximum size of a DER-encoded |
| // ECDSA signature. |
| OPENSSL_EXPORT int EVP_PKEY_size(const EVP_PKEY *pkey); |
| |
| // EVP_PKEY_bits returns the "size", in bits, of |pkey|. For an RSA key, this |
| // returns the bit length of the modulus. For an EC key, this returns the bit |
| // length of the group order. |
| OPENSSL_EXPORT int EVP_PKEY_bits(EVP_PKEY *pkey); |
| |
| // EVP_PKEY_id returns the type of |pkey|, which is one of the |EVP_PKEY_*| |
| // values. |
| OPENSSL_EXPORT int EVP_PKEY_id(const EVP_PKEY *pkey); |
| |
| // EVP_PKEY_type returns |nid| if |nid| is a known key type and |NID_undef| |
| // otherwise. |
| OPENSSL_EXPORT int EVP_PKEY_type(int nid); |
| |
| |
| // Getting and setting concrete public key types. |
| // |
| // The following functions get and set the underlying public key in an |
| // |EVP_PKEY| object. The |set1| functions take an additional reference to the |
| // underlying key and return one on success or zero on error. The |assign| |
| // functions adopt the caller's reference. The |get1| functions return a fresh |
| // reference to the underlying object or NULL if |pkey| is not of the correct |
| // type. The |get0| functions behave the same but return a non-owning |
| // pointer. |
| |
| OPENSSL_EXPORT int EVP_PKEY_set1_RSA(EVP_PKEY *pkey, RSA *key); |
| OPENSSL_EXPORT int EVP_PKEY_assign_RSA(EVP_PKEY *pkey, RSA *key); |
| OPENSSL_EXPORT RSA *EVP_PKEY_get0_RSA(EVP_PKEY *pkey); |
| OPENSSL_EXPORT RSA *EVP_PKEY_get1_RSA(EVP_PKEY *pkey); |
| |
| OPENSSL_EXPORT int EVP_PKEY_set1_DSA(EVP_PKEY *pkey, DSA *key); |
| OPENSSL_EXPORT int EVP_PKEY_assign_DSA(EVP_PKEY *pkey, DSA *key); |
| OPENSSL_EXPORT DSA *EVP_PKEY_get0_DSA(EVP_PKEY *pkey); |
| OPENSSL_EXPORT DSA *EVP_PKEY_get1_DSA(EVP_PKEY *pkey); |
| |
| OPENSSL_EXPORT int EVP_PKEY_set1_EC_KEY(EVP_PKEY *pkey, EC_KEY *key); |
| OPENSSL_EXPORT int EVP_PKEY_assign_EC_KEY(EVP_PKEY *pkey, EC_KEY *key); |
| OPENSSL_EXPORT EC_KEY *EVP_PKEY_get0_EC_KEY(EVP_PKEY *pkey); |
| OPENSSL_EXPORT EC_KEY *EVP_PKEY_get1_EC_KEY(EVP_PKEY *pkey); |
| |
| // EVP_PKEY_new_ed25519_public returns a newly allocated |EVP_PKEY| wrapping an |
| // Ed25519 public key, or NULL on allocation error. |
| OPENSSL_EXPORT EVP_PKEY *EVP_PKEY_new_ed25519_public( |
| const uint8_t public_key[32]); |
| |
| // EVP_PKEY_new_ed25519_private returns a newly allocated |EVP_PKEY| wrapping an |
| // Ed25519 private key, or NULL on allocation error. |
| OPENSSL_EXPORT EVP_PKEY *EVP_PKEY_new_ed25519_private( |
| const uint8_t private_key[64]); |
| |
| #define EVP_PKEY_NONE NID_undef |
| #define EVP_PKEY_RSA NID_rsaEncryption |
| #define EVP_PKEY_DSA NID_dsa |
| #define EVP_PKEY_EC NID_X9_62_id_ecPublicKey |
| #define EVP_PKEY_ED25519 NID_ED25519 |
| |
| // EVP_PKEY_assign sets the underlying key of |pkey| to |key|, which must be of |
| // the given type. The |type| argument should be one of the |EVP_PKEY_*| |
| // values. |
| OPENSSL_EXPORT int EVP_PKEY_assign(EVP_PKEY *pkey, int type, void *key); |
| |
| // EVP_PKEY_set_type sets the type of |pkey| to |type|, which should be one of |
| // the |EVP_PKEY_*| values. It returns one if successful or zero otherwise. If |
| // |pkey| is NULL, it simply reports whether the type is known. |
| OPENSSL_EXPORT int EVP_PKEY_set_type(EVP_PKEY *pkey, int type); |
| |
| // EVP_PKEY_cmp_parameters compares the parameters of |a| and |b|. It returns |
| // one if they match, zero if not, or a negative number of on error. |
| // |
| // WARNING: the return value differs from the usual return value convention. |
| OPENSSL_EXPORT int EVP_PKEY_cmp_parameters(const EVP_PKEY *a, |
| const EVP_PKEY *b); |
| |
| |
| // ASN.1 functions |
| |
| // EVP_parse_public_key decodes a DER-encoded SubjectPublicKeyInfo structure |
| // (RFC 5280) from |cbs| and advances |cbs|. It returns a newly-allocated |
| // |EVP_PKEY| or NULL on error. |
| // |
| // The caller must check the type of the parsed public key to ensure it is |
| // suitable and validate other desired key properties such as RSA modulus size |
| // or EC curve. |
| OPENSSL_EXPORT EVP_PKEY *EVP_parse_public_key(CBS *cbs); |
| |
| // EVP_marshal_public_key marshals |key| as a DER-encoded SubjectPublicKeyInfo |
| // structure (RFC 5280) and appends the result to |cbb|. It returns one on |
| // success and zero on error. |
| OPENSSL_EXPORT int EVP_marshal_public_key(CBB *cbb, const EVP_PKEY *key); |
| |
| // EVP_parse_private_key decodes a DER-encoded PrivateKeyInfo structure (RFC |
| // 5208) from |cbs| and advances |cbs|. It returns a newly-allocated |EVP_PKEY| |
| // or NULL on error. |
| // |
| // The caller must check the type of the parsed private key to ensure it is |
| // suitable and validate other desired key properties such as RSA modulus size |
| // or EC curve. |
| // |
| // A PrivateKeyInfo ends with an optional set of attributes. These are not |
| // processed and so this function will silently ignore any trailing data in the |
| // structure. |
| OPENSSL_EXPORT EVP_PKEY *EVP_parse_private_key(CBS *cbs); |
| |
| // EVP_marshal_private_key marshals |key| as a DER-encoded PrivateKeyInfo |
| // structure (RFC 5208) and appends the result to |cbb|. It returns one on |
| // success and zero on error. |
| OPENSSL_EXPORT int EVP_marshal_private_key(CBB *cbb, const EVP_PKEY *key); |
| |
| |
| // Signing |
| |
| // EVP_DigestSignInit sets up |ctx| for a signing operation with |type| and |
| // |pkey|. The |ctx| argument must have been initialised with |
| // |EVP_MD_CTX_init|. If |pctx| is not NULL, the |EVP_PKEY_CTX| of the signing |
| // operation will be written to |*pctx|; this can be used to set alternative |
| // signing options. |
| // |
| // For single-shot signing algorithms which do not use a pre-hash, such as |
| // Ed25519, |type| should be NULL. The |EVP_MD_CTX| itself is unused but is |
| // present so the API is uniform. See |EVP_DigestSign|. |
| // |
| // It returns one on success, or zero on error. |
| OPENSSL_EXPORT int EVP_DigestSignInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, |
| const EVP_MD *type, ENGINE *e, |
| EVP_PKEY *pkey); |
| |
| // EVP_DigestSignUpdate appends |len| bytes from |data| to the data which will |
| // be signed in |EVP_DigestSignFinal|. It returns one. |
| // |
| // This function performs a streaming signing operation and will fail for |
| // signature algorithms which do not support this. Use |EVP_DigestSign| for a |
| // single-shot operation. |
| OPENSSL_EXPORT int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *data, |
| size_t len); |
| |
| // EVP_DigestSignFinal signs the data that has been included by one or more |
| // calls to |EVP_DigestSignUpdate|. If |out_sig| is NULL then |*out_sig_len| is |
| // set to the maximum number of output bytes. Otherwise, on entry, |
| // |*out_sig_len| must contain the length of the |out_sig| buffer. If the call |
| // is successful, the signature is written to |out_sig| and |*out_sig_len| is |
| // set to its length. |
| // |
| // This function performs a streaming signing operation and will fail for |
| // signature algorithms which do not support this. Use |EVP_DigestSign| for a |
| // single-shot operation. |
| // |
| // It returns one on success, or zero on error. |
| OPENSSL_EXPORT int EVP_DigestSignFinal(EVP_MD_CTX *ctx, uint8_t *out_sig, |
| size_t *out_sig_len); |
| |
| // EVP_DigestSign signs |data_len| bytes from |data| using |ctx|. If |out_sig| |
| // is NULL then |*out_sig_len| is set to the maximum number of output |
| // bytes. Otherwise, on entry, |*out_sig_len| must contain the length of the |
| // |out_sig| buffer. If the call is successful, the signature is written to |
| // |out_sig| and |*out_sig_len| is set to its length. |
| // |
| // It returns one on success and zero on error. |
| OPENSSL_EXPORT int EVP_DigestSign(EVP_MD_CTX *ctx, uint8_t *out_sig, |
| size_t *out_sig_len, const uint8_t *data, |
| size_t data_len); |
| |
| |
| // Verifying |
| |
| // EVP_DigestVerifyInit sets up |ctx| for a signature verification operation |
| // with |type| and |pkey|. The |ctx| argument must have been initialised with |
| // |EVP_MD_CTX_init|. If |pctx| is not NULL, the |EVP_PKEY_CTX| of the signing |
| // operation will be written to |*pctx|; this can be used to set alternative |
| // signing options. |
| // |
| // For single-shot signing algorithms which do not use a pre-hash, such as |
| // Ed25519, |type| should be NULL. The |EVP_MD_CTX| itself is unused but is |
| // present so the API is uniform. See |EVP_DigestVerify|. |
| // |
| // It returns one on success, or zero on error. |
| OPENSSL_EXPORT int EVP_DigestVerifyInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, |
| const EVP_MD *type, ENGINE *e, |
| EVP_PKEY *pkey); |
| |
| // EVP_DigestVerifyUpdate appends |len| bytes from |data| to the data which |
| // will be verified by |EVP_DigestVerifyFinal|. It returns one. |
| // |
| // This function performs streaming signature verification and will fail for |
| // signature algorithms which do not support this. Use |EVP_PKEY_verify_message| |
| // for a single-shot verification. |
| OPENSSL_EXPORT int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *data, |
| size_t len); |
| |
| // EVP_DigestVerifyFinal verifies that |sig_len| bytes of |sig| are a valid |
| // signature for the data that has been included by one or more calls to |
| // |EVP_DigestVerifyUpdate|. It returns one on success and zero otherwise. |
| // |
| // This function performs streaming signature verification and will fail for |
| // signature algorithms which do not support this. Use |EVP_PKEY_verify_message| |
| // for a single-shot verification. |
| OPENSSL_EXPORT int EVP_DigestVerifyFinal(EVP_MD_CTX *ctx, const uint8_t *sig, |
| size_t sig_len); |
| |
| // EVP_DigestVerify verifies that |sig_len| bytes from |sig| are a valid |
| // signature for |data|. It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_DigestVerify(EVP_MD_CTX *ctx, const uint8_t *sig, |
| size_t sig_len, const uint8_t *data, |
| size_t len); |
| |
| |
| // Signing (old functions) |
| |
| // EVP_SignInit_ex configures |ctx|, which must already have been initialised, |
| // for a fresh signing operation using the hash function |type|. It returns one |
| // on success and zero otherwise. |
| // |
| // (In order to initialise |ctx|, either obtain it initialised with |
| // |EVP_MD_CTX_create|, or use |EVP_MD_CTX_init|.) |
| OPENSSL_EXPORT int EVP_SignInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, |
| ENGINE *impl); |
| |
| // EVP_SignInit is a deprecated version of |EVP_SignInit_ex|. |
| // |
| // TODO(fork): remove. |
| OPENSSL_EXPORT int EVP_SignInit(EVP_MD_CTX *ctx, const EVP_MD *type); |
| |
| // EVP_SignUpdate appends |len| bytes from |data| to the data which will be |
| // signed in |EVP_SignFinal|. |
| OPENSSL_EXPORT int EVP_SignUpdate(EVP_MD_CTX *ctx, const void *data, |
| size_t len); |
| |
| // EVP_SignFinal signs the data that has been included by one or more calls to |
| // |EVP_SignUpdate|, using the key |pkey|, and writes it to |sig|. On entry, |
| // |sig| must point to at least |EVP_PKEY_size(pkey)| bytes of space. The |
| // actual size of the signature is written to |*out_sig_len|. |
| // |
| // It returns one on success and zero otherwise. |
| // |
| // It does not modify |ctx|, thus it's possible to continue to use |ctx| in |
| // order to sign a longer message. |
| OPENSSL_EXPORT int EVP_SignFinal(const EVP_MD_CTX *ctx, uint8_t *sig, |
| unsigned int *out_sig_len, EVP_PKEY *pkey); |
| |
| |
| // Verifying (old functions) |
| |
| // EVP_VerifyInit_ex configures |ctx|, which must already have been |
| // initialised, for a fresh signature verification operation using the hash |
| // function |type|. It returns one on success and zero otherwise. |
| // |
| // (In order to initialise |ctx|, either obtain it initialised with |
| // |EVP_MD_CTX_create|, or use |EVP_MD_CTX_init|.) |
| OPENSSL_EXPORT int EVP_VerifyInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, |
| ENGINE *impl); |
| |
| // EVP_VerifyInit is a deprecated version of |EVP_VerifyInit_ex|. |
| // |
| // TODO(fork): remove. |
| OPENSSL_EXPORT int EVP_VerifyInit(EVP_MD_CTX *ctx, const EVP_MD *type); |
| |
| // EVP_VerifyUpdate appends |len| bytes from |data| to the data which will be |
| // signed in |EVP_VerifyFinal|. |
| OPENSSL_EXPORT int EVP_VerifyUpdate(EVP_MD_CTX *ctx, const void *data, |
| size_t len); |
| |
| // EVP_VerifyFinal verifies that |sig_len| bytes of |sig| are a valid |
| // signature, by |pkey|, for the data that has been included by one or more |
| // calls to |EVP_VerifyUpdate|. |
| // |
| // It returns one on success and zero otherwise. |
| // |
| // It does not modify |ctx|, thus it's possible to continue to use |ctx| in |
| // order to sign a longer message. |
| OPENSSL_EXPORT int EVP_VerifyFinal(EVP_MD_CTX *ctx, const uint8_t *sig, |
| size_t sig_len, EVP_PKEY *pkey); |
| |
| |
| // Printing |
| |
| // EVP_PKEY_print_public prints a textual representation of the public key in |
| // |pkey| to |out|. Returns one on success or zero otherwise. |
| OPENSSL_EXPORT int EVP_PKEY_print_public(BIO *out, const EVP_PKEY *pkey, |
| int indent, ASN1_PCTX *pctx); |
| |
| // EVP_PKEY_print_private prints a textual representation of the private key in |
| // |pkey| to |out|. Returns one on success or zero otherwise. |
| OPENSSL_EXPORT int EVP_PKEY_print_private(BIO *out, const EVP_PKEY *pkey, |
| int indent, ASN1_PCTX *pctx); |
| |
| // EVP_PKEY_print_params prints a textual representation of the parameters in |
| // |pkey| to |out|. Returns one on success or zero otherwise. |
| OPENSSL_EXPORT int EVP_PKEY_print_params(BIO *out, const EVP_PKEY *pkey, |
| int indent, ASN1_PCTX *pctx); |
| |
| |
| // Password stretching. |
| // |
| // Password stretching functions take a low-entropy password and apply a slow |
| // function that results in a key suitable for use in symmetric |
| // cryptography. |
| |
| // PKCS5_PBKDF2_HMAC computes |iterations| iterations of PBKDF2 of |password| |
| // and |salt|, using |digest|, and outputs |key_len| bytes to |out_key|. It |
| // returns one on success and zero on error. |
| OPENSSL_EXPORT int PKCS5_PBKDF2_HMAC(const char *password, size_t password_len, |
| const uint8_t *salt, size_t salt_len, |
| unsigned iterations, const EVP_MD *digest, |
| size_t key_len, uint8_t *out_key); |
| |
| // PKCS5_PBKDF2_HMAC_SHA1 is the same as PKCS5_PBKDF2_HMAC, but with |digest| |
| // fixed to |EVP_sha1|. |
| OPENSSL_EXPORT int PKCS5_PBKDF2_HMAC_SHA1(const char *password, |
| size_t password_len, |
| const uint8_t *salt, size_t salt_len, |
| unsigned iterations, size_t key_len, |
| uint8_t *out_key); |
| |
| // EVP_PBE_scrypt expands |password| into a secret key of length |key_len| using |
| // scrypt, as described in RFC 7914, and writes the result to |out_key|. It |
| // returns one on success and zero on error. |
| // |
| // |N|, |r|, and |p| are as described in RFC 7914 section 6. They determine the |
| // cost of the operation. If the memory required exceeds |max_mem|, the |
| // operation will fail instead. If |max_mem| is zero, a defult limit of 32MiB |
| // will be used. |
| OPENSSL_EXPORT int EVP_PBE_scrypt(const char *password, size_t password_len, |
| const uint8_t *salt, size_t salt_len, |
| uint64_t N, uint64_t r, uint64_t p, |
| size_t max_mem, uint8_t *out_key, |
| size_t key_len); |
| |
| |
| // Public key contexts. |
| // |
| // |EVP_PKEY_CTX| objects hold the context of an operation (e.g. signing or |
| // encrypting) that uses a public key. |
| |
| // EVP_PKEY_CTX_new allocates a fresh |EVP_PKEY_CTX| for use with |pkey|. It |
| // returns the context or NULL on error. |
| OPENSSL_EXPORT EVP_PKEY_CTX *EVP_PKEY_CTX_new(EVP_PKEY *pkey, ENGINE *e); |
| |
| // EVP_PKEY_CTX_new_id allocates a fresh |EVP_PKEY_CTX| for a key of type |id| |
| // (e.g. |EVP_PKEY_HMAC|). This can be used for key generation where |
| // |EVP_PKEY_CTX_new| can't be used because there isn't an |EVP_PKEY| to pass |
| // it. It returns the context or NULL on error. |
| OPENSSL_EXPORT EVP_PKEY_CTX *EVP_PKEY_CTX_new_id(int id, ENGINE *e); |
| |
| // EVP_PKEY_CTX_free frees |ctx| and the data it owns. |
| OPENSSL_EXPORT void EVP_PKEY_CTX_free(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_CTX_dup allocates a fresh |EVP_PKEY_CTX| and sets it equal to the |
| // state of |ctx|. It returns the fresh |EVP_PKEY_CTX| or NULL on error. |
| OPENSSL_EXPORT EVP_PKEY_CTX *EVP_PKEY_CTX_dup(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_CTX_get0_pkey returns the |EVP_PKEY| associated with |ctx|. |
| OPENSSL_EXPORT EVP_PKEY *EVP_PKEY_CTX_get0_pkey(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_sign_init initialises an |EVP_PKEY_CTX| for a signing operation. It |
| // should be called before |EVP_PKEY_sign|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_sign_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_sign signs |digest_len| bytes from |digest| using |ctx|. If |sig| is |
| // NULL, the maximum size of the signature is written to |
| // |out_sig_len|. Otherwise, |*sig_len| must contain the number of bytes of |
| // space available at |sig|. If sufficient, the signature will be written to |
| // |sig| and |*sig_len| updated with the true length. |
| // |
| // This function expects a pre-hashed input and will fail for signature |
| // algorithms which do not support this. Use |EVP_DigestSignInit| to sign an |
| // unhashed input. |
| // |
| // WARNING: Setting |sig| to NULL only gives the maximum size of the |
| // signature. The actual signature may be smaller. |
| // |
| // It returns one on success or zero on error. (Note: this differs from |
| // OpenSSL, which can also return negative values to indicate an error. ) |
| OPENSSL_EXPORT int EVP_PKEY_sign(EVP_PKEY_CTX *ctx, uint8_t *sig, |
| size_t *sig_len, const uint8_t *digest, |
| size_t digest_len); |
| |
| // EVP_PKEY_verify_init initialises an |EVP_PKEY_CTX| for a signature |
| // verification operation. It should be called before |EVP_PKEY_verify|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_verify_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_verify verifies that |sig_len| bytes from |sig| are a valid |
| // signature for |digest|. |
| // |
| // This function expects a pre-hashed input and will fail for signature |
| // algorithms which do not support this. Use |EVP_DigestVerifyInit| to verify a |
| // signature given the unhashed input. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_verify(EVP_PKEY_CTX *ctx, const uint8_t *sig, |
| size_t sig_len, const uint8_t *digest, |
| size_t digest_len); |
| |
| // EVP_PKEY_encrypt_init initialises an |EVP_PKEY_CTX| for an encryption |
| // operation. It should be called before |EVP_PKEY_encrypt|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_encrypt_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_encrypt encrypts |in_len| bytes from |in|. If |out| is NULL, the |
| // maximum size of the ciphertext is written to |out_len|. Otherwise, |*out_len| |
| // must contain the number of bytes of space available at |out|. If sufficient, |
| // the ciphertext will be written to |out| and |*out_len| updated with the true |
| // length. |
| // |
| // WARNING: Setting |out| to NULL only gives the maximum size of the |
| // ciphertext. The actual ciphertext may be smaller. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_encrypt(EVP_PKEY_CTX *ctx, uint8_t *out, |
| size_t *out_len, const uint8_t *in, |
| size_t in_len); |
| |
| // EVP_PKEY_decrypt_init initialises an |EVP_PKEY_CTX| for a decryption |
| // operation. It should be called before |EVP_PKEY_decrypt|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_decrypt_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_decrypt decrypts |in_len| bytes from |in|. If |out| is NULL, the |
| // maximum size of the plaintext is written to |out_len|. Otherwise, |*out_len| |
| // must contain the number of bytes of space available at |out|. If sufficient, |
| // the ciphertext will be written to |out| and |*out_len| updated with the true |
| // length. |
| // |
| // WARNING: Setting |out| to NULL only gives the maximum size of the |
| // plaintext. The actual plaintext may be smaller. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_decrypt(EVP_PKEY_CTX *ctx, uint8_t *out, |
| size_t *out_len, const uint8_t *in, |
| size_t in_len); |
| |
| // EVP_PKEY_verify_recover_init initialises an |EVP_PKEY_CTX| for a public-key |
| // decryption operation. It should be called before |EVP_PKEY_verify_recover|. |
| // |
| // Public-key decryption is a very obscure operation that is only implemented |
| // by RSA keys. It is effectively a signature verification operation that |
| // returns the signed message directly. It is almost certainly not what you |
| // want. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_verify_recover_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_verify_recover decrypts |sig_len| bytes from |sig|. If |out| is |
| // NULL, the maximum size of the plaintext is written to |out_len|. Otherwise, |
| // |*out_len| must contain the number of bytes of space available at |out|. If |
| // sufficient, the ciphertext will be written to |out| and |*out_len| updated |
| // with the true length. |
| // |
| // WARNING: Setting |out| to NULL only gives the maximum size of the |
| // plaintext. The actual plaintext may be smaller. |
| // |
| // See the warning about this operation in |EVP_PKEY_verify_recover_init|. It |
| // is probably not what you want. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_verify_recover(EVP_PKEY_CTX *ctx, uint8_t *out, |
| size_t *out_len, const uint8_t *sig, |
| size_t siglen); |
| |
| // EVP_PKEY_derive_init initialises an |EVP_PKEY_CTX| for a key derivation |
| // operation. It should be called before |EVP_PKEY_derive_set_peer| and |
| // |EVP_PKEY_derive|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_derive_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_derive_set_peer sets the peer's key to be used for key derivation |
| // by |ctx| to |peer|. It should be called after |EVP_PKEY_derive_init|. (For |
| // example, this is used to set the peer's key in (EC)DH.) It returns one on |
| // success and zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_derive_set_peer(EVP_PKEY_CTX *ctx, EVP_PKEY *peer); |
| |
| // EVP_PKEY_derive derives a shared key between the two keys configured in |
| // |ctx|. If |key| is non-NULL then, on entry, |out_key_len| must contain the |
| // amount of space at |key|. If sufficient then the shared key will be written |
| // to |key| and |*out_key_len| will be set to the length. If |key| is NULL then |
| // |out_key_len| will be set to the maximum length. |
| // |
| // WARNING: Setting |out| to NULL only gives the maximum size of the key. The |
| // actual key may be smaller. |
| // |
| // It returns one on success and zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_derive(EVP_PKEY_CTX *ctx, uint8_t *key, |
| size_t *out_key_len); |
| |
| // EVP_PKEY_keygen_init initialises an |EVP_PKEY_CTX| for a key generation |
| // operation. It should be called before |EVP_PKEY_keygen|. |
| // |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_keygen_init(EVP_PKEY_CTX *ctx); |
| |
| // EVP_PKEY_keygen performs a key generation operation using the values from |
| // |ctx| and sets |*ppkey| to a fresh |EVP_PKEY| containing the resulting key. |
| // It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_keygen(EVP_PKEY_CTX *ctx, EVP_PKEY **ppkey); |
| |
| |
| // Generic control functions. |
| |
| // EVP_PKEY_CTX_set_signature_md sets |md| as the digest to be used in a |
| // signature operation. It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_signature_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD *md); |
| |
| // EVP_PKEY_CTX_get_signature_md sets |*out_md| to the digest to be used in a |
| // signature operation. It returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get_signature_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD **out_md); |
| |
| |
| // RSA specific control functions. |
| |
| // EVP_PKEY_CTX_set_rsa_padding sets the padding type to use. It should be one |
| // of the |RSA_*_PADDING| values. Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_padding(EVP_PKEY_CTX *ctx, int padding); |
| |
| // EVP_PKEY_CTX_get_rsa_padding sets |*out_padding| to the current padding |
| // value, which is one of the |RSA_*_PADDING| values. Returns one on success or |
| // zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get_rsa_padding(EVP_PKEY_CTX *ctx, |
| int *out_padding); |
| |
| // EVP_PKEY_CTX_set_rsa_pss_saltlen sets the length of the salt in a PSS-padded |
| // signature. A value of -1 cause the salt to be the same length as the digest |
| // in the signature. A value of -2 causes the salt to be the maximum length |
| // that will fit when signing and recovered from the signature when verifying. |
| // Otherwise the value gives the size of the salt in bytes. |
| // |
| // If unsure, use -1. |
| // |
| // Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_pss_saltlen(EVP_PKEY_CTX *ctx, |
| int salt_len); |
| |
| // EVP_PKEY_CTX_get_rsa_pss_saltlen sets |*out_salt_len| to the salt length of |
| // a PSS-padded signature. See the documentation for |
| // |EVP_PKEY_CTX_set_rsa_pss_saltlen| for details of the special values that it |
| // can take. |
| // |
| // Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get_rsa_pss_saltlen(EVP_PKEY_CTX *ctx, |
| int *out_salt_len); |
| |
| // EVP_PKEY_CTX_set_rsa_keygen_bits sets the size of the desired RSA modulus, |
| // in bits, for key generation. Returns one on success or zero on |
| // error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_keygen_bits(EVP_PKEY_CTX *ctx, |
| int bits); |
| |
| // EVP_PKEY_CTX_set_rsa_keygen_pubexp sets |e| as the public exponent for key |
| // generation. Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_keygen_pubexp(EVP_PKEY_CTX *ctx, |
| BIGNUM *e); |
| |
| // EVP_PKEY_CTX_set_rsa_oaep_md sets |md| as the digest used in OAEP padding. |
| // Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_oaep_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD *md); |
| |
| // EVP_PKEY_CTX_get_rsa_oaep_md sets |*out_md| to the digest function used in |
| // OAEP padding. Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get_rsa_oaep_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD **out_md); |
| |
| // EVP_PKEY_CTX_set_rsa_mgf1_md sets |md| as the digest used in MGF1. Returns |
| // one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set_rsa_mgf1_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD *md); |
| |
| // EVP_PKEY_CTX_get_rsa_mgf1_md sets |*out_md| to the digest function used in |
| // MGF1. Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get_rsa_mgf1_md(EVP_PKEY_CTX *ctx, |
| const EVP_MD **out_md); |
| |
| // EVP_PKEY_CTX_set0_rsa_oaep_label sets |label_len| bytes from |label| as the |
| // label used in OAEP. DANGER: On success, this call takes ownership of |label| |
| // and will call |OPENSSL_free| on it when |ctx| is destroyed. |
| // |
| // Returns one on success or zero on error. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_set0_rsa_oaep_label(EVP_PKEY_CTX *ctx, |
| uint8_t *label, |
| size_t label_len); |
| |
| // EVP_PKEY_CTX_get0_rsa_oaep_label sets |*out_label| to point to the internal |
| // buffer containing the OAEP label (which may be NULL) and returns the length |
| // of the label or a negative value on error. |
| // |
| // WARNING: the return value differs from the usual return value convention. |
| OPENSSL_EXPORT int EVP_PKEY_CTX_get0_rsa_oaep_label(EVP_PKEY_CTX *ctx, |
| const uint8_t **out_label); |
| |
| |
| // Deprecated functions. |
| |
| // EVP_PKEY_DH is defined for compatibility, but it is impossible to create an |
| // |EVP_PKEY| of that type. |
| #define EVP_PKEY_DH NID_dhKeyAgreement |
| |
| // EVP_PKEY_RSA2 was historically an alternate form for RSA public keys (OID |
| // 2.5.8.1.1), but is no longer accepted. |
| #define EVP_PKEY_RSA2 NID_rsa |
| |
| // OpenSSL_add_all_algorithms does nothing. |
| OPENSSL_EXPORT void OpenSSL_add_all_algorithms(void); |
| |
| // OPENSSL_add_all_algorithms_conf does nothing. |
| OPENSSL_EXPORT void OPENSSL_add_all_algorithms_conf(void); |
| |
| // OpenSSL_add_all_ciphers does nothing. |
| OPENSSL_EXPORT void OpenSSL_add_all_ciphers(void); |
| |
| // OpenSSL_add_all_digests does nothing. |
| OPENSSL_EXPORT void OpenSSL_add_all_digests(void); |
| |
| // EVP_cleanup does nothing. |
| OPENSSL_EXPORT void EVP_cleanup(void); |
| |
| OPENSSL_EXPORT void EVP_CIPHER_do_all_sorted( |
| void (*callback)(const EVP_CIPHER *cipher, const char *name, |
| const char *unused, void *arg), |
| void *arg); |
| |
| OPENSSL_EXPORT void EVP_MD_do_all_sorted(void (*callback)(const EVP_MD *cipher, |
| const char *name, |
| const char *unused, |
| void *arg), |
| void *arg); |
| |
| // i2d_PrivateKey marshals a private key from |key| to an ASN.1, DER |
| // structure. If |outp| is not NULL then the result is written to |*outp| and |
| // |*outp| is advanced just past the output. It returns the number of bytes in |
| // the result, whether written or not, or a negative value on error. |
| // |
| // RSA keys are serialized as a DER-encoded RSAPublicKey (RFC 3447) structure. |
| // EC keys are serialized as a DER-encoded ECPrivateKey (RFC 5915) structure. |
| // |
| // Use |RSA_marshal_private_key| or |EC_KEY_marshal_private_key| instead. |
| OPENSSL_EXPORT int i2d_PrivateKey(const EVP_PKEY *key, uint8_t **outp); |
| |
| // i2d_PublicKey marshals a public key from |key| to a type-specific format. |
| // If |outp| is not NULL then the result is written to |*outp| and |
| // |*outp| is advanced just past the output. It returns the number of bytes in |
| // the result, whether written or not, or a negative value on error. |
| // |
| // RSA keys are serialized as a DER-encoded RSAPublicKey (RFC 3447) structure. |
| // EC keys are serialized as an EC point per SEC 1. |
| // |
| // Use |RSA_marshal_public_key| or |EC_POINT_point2cbb| instead. |
| OPENSSL_EXPORT int i2d_PublicKey(EVP_PKEY *key, uint8_t **outp); |
| |
| // d2i_PrivateKey parses an ASN.1, DER-encoded, private key from |len| bytes at |
| // |*inp|. If |out| is not NULL then, on exit, a pointer to the result is in |
| // |*out|. Note that, even if |*out| is already non-NULL on entry, it will not |
| // be written to. Rather, a fresh |EVP_PKEY| is allocated and the previous one |
| // is freed. On successful exit, |*inp| is advanced past the DER structure. It |
| // returns the result or NULL on error. |
| // |
| // This function tries to detect one of several formats. Instead, use |
| // |EVP_parse_private_key| for a PrivateKeyInfo, |RSA_parse_private_key| for an |
| // RSAPrivateKey, and |EC_parse_private_key| for an ECPrivateKey. |
| OPENSSL_EXPORT EVP_PKEY *d2i_PrivateKey(int type, EVP_PKEY **out, |
| const uint8_t **inp, long len); |
| |
| // d2i_AutoPrivateKey acts the same as |d2i_PrivateKey|, but detects the type |
| // of the private key. |
| // |
| // This function tries to detect one of several formats. Instead, use |
| // |EVP_parse_private_key| for a PrivateKeyInfo, |RSA_parse_private_key| for an |
| // RSAPrivateKey, and |EC_parse_private_key| for an ECPrivateKey. |
| OPENSSL_EXPORT EVP_PKEY *d2i_AutoPrivateKey(EVP_PKEY **out, const uint8_t **inp, |
| long len); |
| |
| // EVP_PKEY_get0_DH returns NULL. |
| OPENSSL_EXPORT DH *EVP_PKEY_get0_DH(EVP_PKEY *pkey); |
| |
| // EVP_PKEY_get1_DH returns NULL. |
| OPENSSL_EXPORT DH *EVP_PKEY_get1_DH(EVP_PKEY *pkey); |
| |
| |
| // Preprocessor compatibility section (hidden). |
| // |
| // Historically, a number of APIs were implemented in OpenSSL as macros and |
| // constants to 'ctrl' functions. To avoid breaking #ifdefs in consumers, this |
| // section defines a number of legacy macros. |
| |
| #define EVP_PKEY_CTX_set_rsa_oaep_md EVP_PKEY_CTX_set_rsa_oaep_md |
| #define EVP_PKEY_CTX_set0_rsa_oaep_label EVP_PKEY_CTX_set0_rsa_oaep_label |
| |
| |
| // Private structures. |
| |
| struct evp_pkey_st { |
| CRYPTO_refcount_t references; |
| |
| // type contains one of the EVP_PKEY_* values or NID_undef and determines |
| // which element (if any) of the |pkey| union is valid. |
| int type; |
| |
| union { |
| void *ptr; |
| RSA *rsa; |
| DSA *dsa; |
| DH *dh; |
| EC_KEY *ec; |
| } pkey; |
| |
| // ameth contains a pointer to a method table that contains many ASN.1 |
| // methods for the key type. |
| const EVP_PKEY_ASN1_METHOD *ameth; |
| } /* EVP_PKEY */; |
| |
| |
| #if defined(__cplusplus) |
| } // extern C |
| |
| extern "C++" { |
| namespace bssl { |
| |
| BORINGSSL_MAKE_DELETER(EVP_PKEY, EVP_PKEY_free) |
| BORINGSSL_MAKE_DELETER(EVP_PKEY_CTX, EVP_PKEY_CTX_free) |
| |
| } // namespace bssl |
| |
| } // extern C++ |
| |
| #endif |
| |
| #define EVP_R_BUFFER_TOO_SMALL 100 |
| #define EVP_R_COMMAND_NOT_SUPPORTED 101 |
| #define EVP_R_DECODE_ERROR 102 |
| #define EVP_R_DIFFERENT_KEY_TYPES 103 |
| #define EVP_R_DIFFERENT_PARAMETERS 104 |
| #define EVP_R_ENCODE_ERROR 105 |
| #define EVP_R_EXPECTING_AN_EC_KEY_KEY 106 |
| #define EVP_R_EXPECTING_AN_RSA_KEY 107 |
| #define EVP_R_EXPECTING_A_DSA_KEY 108 |
| #define EVP_R_ILLEGAL_OR_UNSUPPORTED_PADDING_MODE 109 |
| #define EVP_R_INVALID_DIGEST_LENGTH 110 |
| #define EVP_R_INVALID_DIGEST_TYPE 111 |
| #define EVP_R_INVALID_KEYBITS 112 |
| #define EVP_R_INVALID_MGF1_MD 113 |
| #define EVP_R_INVALID_OPERATION 114 |
| #define EVP_R_INVALID_PADDING_MODE 115 |
| #define EVP_R_INVALID_PSS_SALTLEN 116 |
| #define EVP_R_KEYS_NOT_SET 117 |
| #define EVP_R_MISSING_PARAMETERS 118 |
| #define EVP_R_NO_DEFAULT_DIGEST 119 |
| #define EVP_R_NO_KEY_SET 120 |
| #define EVP_R_NO_MDC2_SUPPORT 121 |
| #define EVP_R_NO_NID_FOR_CURVE 122 |
| #define EVP_R_NO_OPERATION_SET 123 |
| #define EVP_R_NO_PARAMETERS_SET 124 |
| #define EVP_R_OPERATION_NOT_SUPPORTED_FOR_THIS_KEYTYPE 125 |
| #define EVP_R_OPERATON_NOT_INITIALIZED 126 |
| #define EVP_R_UNKNOWN_PUBLIC_KEY_TYPE 127 |
| #define EVP_R_UNSUPPORTED_ALGORITHM 128 |
| #define EVP_R_UNSUPPORTED_PUBLIC_KEY_TYPE 129 |
| #define EVP_R_NOT_A_PRIVATE_KEY 130 |
| #define EVP_R_INVALID_SIGNATURE 131 |
| #define EVP_R_MEMORY_LIMIT_EXCEEDED 132 |
| #define EVP_R_INVALID_PARAMETERS 133 |
| |
| #endif // OPENSSL_HEADER_EVP_H |