| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). */ |
| |
| #include <stdio.h> |
| |
| #include <openssl/buf.h> |
| #include <openssl/err.h> |
| #include <openssl/evp.h> |
| #include <openssl/mem.h> |
| #include <openssl/obj.h> |
| #include <openssl/rand.h> |
| |
| #include "ssl_locl.h" |
| |
| static const SSL_METHOD *ssl23_get_server_method(int ver); |
| int ssl23_get_client_hello(SSL *s); |
| static const SSL_METHOD *ssl23_get_server_method(int ver) |
| { |
| if (ver == SSL3_VERSION) |
| return(SSLv3_server_method()); |
| else if (ver == TLS1_VERSION) |
| return(TLSv1_server_method()); |
| else if (ver == TLS1_1_VERSION) |
| return(TLSv1_1_server_method()); |
| else if (ver == TLS1_2_VERSION) |
| return(TLSv1_2_server_method()); |
| else |
| return(NULL); |
| } |
| |
| IMPLEMENT_ssl23_meth_func(SSLv23_server_method, |
| ssl23_accept, |
| ssl_undefined_function, |
| ssl23_get_server_method) |
| |
| int ssl23_accept(SSL *s) |
| { |
| BUF_MEM *buf; |
| void (*cb)(const SSL *ssl,int type,int val)=NULL; |
| int ret= -1; |
| int new_state,state; |
| |
| ERR_clear_error(); |
| ERR_clear_system_error(); |
| |
| if (s->info_callback != NULL) |
| cb=s->info_callback; |
| else if (s->ctx->info_callback != NULL) |
| cb=s->ctx->info_callback; |
| |
| s->in_handshake++; |
| if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s); |
| |
| for (;;) |
| { |
| state=s->state; |
| |
| switch(s->state) |
| { |
| case SSL_ST_BEFORE: |
| case SSL_ST_ACCEPT: |
| case SSL_ST_BEFORE|SSL_ST_ACCEPT: |
| case SSL_ST_OK|SSL_ST_ACCEPT: |
| |
| s->server=1; |
| if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1); |
| |
| /* s->version=SSL3_VERSION; */ |
| s->type=SSL_ST_ACCEPT; |
| |
| if (s->init_buf == NULL) |
| { |
| if ((buf=BUF_MEM_new()) == NULL) |
| { |
| ret= -1; |
| goto end; |
| } |
| if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) |
| { |
| ret= -1; |
| goto end; |
| } |
| s->init_buf=buf; |
| } |
| |
| ssl3_init_finished_mac(s); |
| |
| s->state=SSL23_ST_SR_CLNT_HELLO_A; |
| s->ctx->stats.sess_accept++; |
| s->init_num=0; |
| break; |
| |
| case SSL23_ST_SR_CLNT_HELLO_A: |
| case SSL23_ST_SR_CLNT_HELLO_B: |
| |
| s->shutdown=0; |
| ret=ssl23_get_client_hello(s); |
| if (ret >= 0) cb=NULL; |
| goto end; |
| /* break; */ |
| |
| default: |
| OPENSSL_PUT_ERROR(SSL, ssl23_accept, SSL_R_UNKNOWN_STATE); |
| ret= -1; |
| goto end; |
| /* break; */ |
| } |
| |
| if ((cb != NULL) && (s->state != state)) |
| { |
| new_state=s->state; |
| s->state=state; |
| cb(s,SSL_CB_ACCEPT_LOOP,1); |
| s->state=new_state; |
| } |
| } |
| end: |
| s->in_handshake--; |
| if (cb != NULL) |
| cb(s,SSL_CB_ACCEPT_EXIT,ret); |
| return(ret); |
| } |
| |
| |
| int ssl23_get_client_hello(SSL *s) |
| { |
| char buf_space[11]; /* Request this many bytes in initial read. |
| * We can detect SSL 3.0/TLS 1.0 Client Hellos |
| * ('type == 3') correctly only when the following |
| * is in a single record, which is not guaranteed by |
| * the protocol specification: |
| * Byte Content |
| * 0 type \ |
| * 1/2 version > record header |
| * 3/4 length / |
| * 5 msg_type \ |
| * 6-8 length > Client Hello message |
| * 9/10 client_version / |
| */ |
| char *buf= &(buf_space[0]); |
| unsigned char *p,*d,*d_len,*dd; |
| unsigned int i; |
| unsigned int csl,sil,cl; |
| int n=0,j; |
| int type=0; |
| int v[2]; |
| |
| if (s->state == SSL23_ST_SR_CLNT_HELLO_A) |
| { |
| /* read the initial header */ |
| v[0]=v[1]=0; |
| |
| if (!ssl3_setup_buffers(s)) goto err; |
| |
| n=ssl23_read_bytes(s, sizeof buf_space); |
| if (n != sizeof buf_space) return(n); /* n == -1 || n == 0 */ |
| |
| p=s->packet; |
| |
| memcpy(buf,p,n); |
| |
| if ((p[0] & 0x80) && (p[2] == SSL2_MT_CLIENT_HELLO)) |
| { |
| /* |
| * SSLv2 header |
| */ |
| if ((p[3] == 0x00) && (p[4] == 0x02)) |
| { |
| v[0]=p[3]; v[1]=p[4]; |
| /* SSLv2 */ |
| if (!(s->options & SSL_OP_NO_SSLv2)) |
| type=1; |
| } |
| else if (p[3] == SSL3_VERSION_MAJOR) |
| { |
| v[0]=p[3]; v[1]=p[4]; |
| /* SSLv3/TLSv1 */ |
| if (p[4] >= TLS1_VERSION_MINOR) |
| { |
| if (p[4] >= TLS1_2_VERSION_MINOR && |
| !(s->options & SSL_OP_NO_TLSv1_2)) |
| { |
| s->version=TLS1_2_VERSION; |
| s->state=SSL23_ST_SR_CLNT_HELLO_B; |
| } |
| else if (p[4] >= TLS1_1_VERSION_MINOR && |
| !(s->options & SSL_OP_NO_TLSv1_1)) |
| { |
| s->version=TLS1_1_VERSION; |
| /* type=2; */ /* done later to survive restarts */ |
| s->state=SSL23_ST_SR_CLNT_HELLO_B; |
| } |
| else if (!(s->options & SSL_OP_NO_TLSv1)) |
| { |
| s->version=TLS1_VERSION; |
| /* type=2; */ /* done later to survive restarts */ |
| s->state=SSL23_ST_SR_CLNT_HELLO_B; |
| } |
| else if (!(s->options & SSL_OP_NO_SSLv3)) |
| { |
| s->version=SSL3_VERSION; |
| /* type=2; */ |
| s->state=SSL23_ST_SR_CLNT_HELLO_B; |
| } |
| else if (!(s->options & SSL_OP_NO_SSLv2)) |
| { |
| type=1; |
| } |
| } |
| else if (!(s->options & SSL_OP_NO_SSLv3)) |
| { |
| s->version=SSL3_VERSION; |
| /* type=2; */ |
| s->state=SSL23_ST_SR_CLNT_HELLO_B; |
| } |
| else if (!(s->options & SSL_OP_NO_SSLv2)) |
| type=1; |
| |
| } |
| } |
| else if ((p[0] == SSL3_RT_HANDSHAKE) && |
| (p[1] == SSL3_VERSION_MAJOR) && |
| (p[5] == SSL3_MT_CLIENT_HELLO) && |
| ((p[3] == 0 && p[4] < 5 /* silly record length? */) |
| || (p[9] >= p[1]))) |
| { |
| /* |
| * SSLv3 or tls1 header |
| */ |
| |
| v[0]=p[1]; /* major version (= SSL3_VERSION_MAJOR) */ |
| /* We must look at client_version inside the Client Hello message |
| * to get the correct minor version. |
| * However if we have only a pathologically small fragment of the |
| * Client Hello message, this would be difficult, and we'd have |
| * to read more records to find out. |
| * No known SSL 3.0 client fragments ClientHello like this, |
| * so we simply assume TLS 1.0 to avoid protocol version downgrade |
| * attacks. */ |
| if (p[3] == 0 && p[4] < 6) |
| { |
| #if 0 |
| OPENSSL_PUT_ERROR(SSL, XXX, SSL_R_RECORD_TOO_SMALL); |
| goto err; |
| #else |
| v[1] = TLS1_VERSION_MINOR; |
| #endif |
| } |
| /* if major version number > 3 set minor to a value |
| * which will use the highest version 3 we support. |
| * If TLS 2.0 ever appears we will need to revise |
| * this.... |
| */ |
| else if (p[9] > SSL3_VERSION_MAJOR) |
| v[1]=0xff; |
| else |
| v[1]=p[10]; /* minor version according to client_version */ |
| if (v[1] >= TLS1_VERSION_MINOR) |
| { |
| if (v[1] >= TLS1_2_VERSION_MINOR && |
| !(s->options & SSL_OP_NO_TLSv1_2)) |
| { |
| s->version=TLS1_2_VERSION; |
| type=3; |
| } |
| else if (v[1] >= TLS1_1_VERSION_MINOR && |
| !(s->options & SSL_OP_NO_TLSv1_1)) |
| { |
| s->version=TLS1_1_VERSION; |
| type=3; |
| } |
| else if (!(s->options & SSL_OP_NO_TLSv1)) |
| { |
| s->version=TLS1_VERSION; |
| type=3; |
| } |
| else if (!(s->options & SSL_OP_NO_SSLv3)) |
| { |
| s->version=SSL3_VERSION; |
| type=3; |
| } |
| } |
| else |
| { |
| /* client requests SSL 3.0 */ |
| if (!(s->options & SSL_OP_NO_SSLv3)) |
| { |
| s->version=SSL3_VERSION; |
| type=3; |
| } |
| else if (!(s->options & SSL_OP_NO_TLSv1)) |
| { |
| /* we won't be able to use TLS of course, |
| * but this will send an appropriate alert */ |
| s->version=TLS1_VERSION; |
| type=3; |
| } |
| } |
| } |
| else if ((strncmp("GET ", (char *)p,4) == 0) || |
| (strncmp("POST ",(char *)p,5) == 0) || |
| (strncmp("HEAD ",(char *)p,5) == 0) || |
| (strncmp("PUT ", (char *)p,4) == 0)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_HTTP_REQUEST); |
| goto err; |
| } |
| else if (strncmp("CONNECT",(char *)p,7) == 0) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_HTTPS_PROXY_REQUEST); |
| goto err; |
| } |
| } |
| |
| if (s->version < TLS1_2_VERSION && tls1_suiteb(s)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_ONLY_TLS_1_2_ALLOWED_IN_SUITEB_MODE); |
| goto err; |
| } |
| |
| if (s->state == SSL23_ST_SR_CLNT_HELLO_B) |
| { |
| /* we have SSLv3/TLSv1 in an SSLv2 header |
| * (other cases skip this state) */ |
| |
| type=2; |
| p=s->packet; |
| v[0] = p[3]; /* == SSL3_VERSION_MAJOR */ |
| v[1] = p[4]; |
| |
| n=((p[0]&0x7f)<<8)|p[1]; |
| if (n > (1024*4)) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_RECORD_TOO_LARGE); |
| goto err; |
| } |
| |
| j=ssl23_read_bytes(s,n+2); |
| if (j <= 0) return(j); |
| |
| ssl3_finish_mac(s, s->packet+2, s->packet_length-2); |
| if (s->msg_callback) |
| s->msg_callback(0, SSL2_VERSION, 0, s->packet+2, s->packet_length-2, s, s->msg_callback_arg); /* CLIENT-HELLO */ |
| |
| p=s->packet; |
| p+=5; |
| n2s(p,csl); |
| n2s(p,sil); |
| n2s(p,cl); |
| d=(unsigned char *)s->init_buf->data; |
| if ((csl+sil+cl+11) != s->packet_length) /* We can't have TLS extensions in SSL 2.0 format |
| * Client Hello, can we? Error condition should be |
| * '>' otherweise */ |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_RECORD_LENGTH_MISMATCH); |
| goto err; |
| } |
| |
| /* record header: msg_type ... */ |
| *(d++) = SSL3_MT_CLIENT_HELLO; |
| /* ... and length (actual value will be written later) */ |
| d_len = d; |
| d += 3; |
| |
| /* client_version */ |
| *(d++) = SSL3_VERSION_MAJOR; /* == v[0] */ |
| *(d++) = v[1]; |
| |
| /* lets populate the random area */ |
| /* get the challenge_length */ |
| i=(cl > SSL3_RANDOM_SIZE)?SSL3_RANDOM_SIZE:cl; |
| memset(d,0,SSL3_RANDOM_SIZE); |
| memcpy(&(d[SSL3_RANDOM_SIZE-i]),&(p[csl+sil]),i); |
| d+=SSL3_RANDOM_SIZE; |
| |
| /* no session-id reuse */ |
| *(d++)=0; |
| |
| /* ciphers */ |
| j=0; |
| dd=d; |
| d+=2; |
| for (i=0; i<csl; i+=3) |
| { |
| if (p[i] != 0) continue; |
| *(d++)=p[i+1]; |
| *(d++)=p[i+2]; |
| j+=2; |
| } |
| s2n(j,dd); |
| |
| /* COMPRESSION */ |
| *(d++)=1; |
| *(d++)=0; |
| |
| #if 0 |
| /* copy any remaining data with may be extensions */ |
| p = p+csl+sil+cl; |
| while (p < s->packet+s->packet_length) |
| { |
| *(d++)=*(p++); |
| } |
| #endif |
| |
| i = (d-(unsigned char *)s->init_buf->data) - 4; |
| l2n3((long)i, d_len); |
| |
| /* get the data reused from the init_buf */ |
| s->s3->tmp.reuse_message=1; |
| s->s3->tmp.message_type=SSL3_MT_CLIENT_HELLO; |
| s->s3->tmp.message_size=i; |
| } |
| |
| /* imaginary new state (for program structure): */ |
| /* s->state = SSL23_SR_CLNT_HELLO_C */ |
| |
| if (type == 1) |
| { |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_UNSUPPORTED_PROTOCOL); |
| goto err; |
| } |
| |
| if ((type == 2) || (type == 3)) |
| { |
| /* we have SSLv3/TLSv1 (type 2: SSL2 style, type 3: SSL3/TLS style) */ |
| |
| if (!ssl_init_wbio_buffer(s,1)) goto err; |
| |
| /* we are in this state */ |
| s->state=SSL3_ST_SR_CLNT_HELLO_A; |
| |
| if (type == 3) |
| { |
| /* put the 'n' bytes we have read into the input buffer |
| * for SSLv3 */ |
| s->rstate=SSL_ST_READ_HEADER; |
| s->packet_length=n; |
| if (s->s3->rbuf.buf == NULL) |
| if (!ssl3_setup_read_buffer(s)) |
| goto err; |
| |
| s->packet= &(s->s3->rbuf.buf[0]); |
| memcpy(s->packet,buf,n); |
| s->s3->rbuf.left=n; |
| s->s3->rbuf.offset=0; |
| } |
| else |
| { |
| s->packet_length=0; |
| s->s3->rbuf.left=0; |
| s->s3->rbuf.offset=0; |
| } |
| if (s->version == TLS1_2_VERSION) |
| s->method = TLSv1_2_server_method(); |
| else if (s->version == TLS1_1_VERSION) |
| s->method = TLSv1_1_server_method(); |
| else if (s->version == TLS1_VERSION) |
| s->method = TLSv1_server_method(); |
| else |
| s->method = SSLv3_server_method(); |
| #if 0 /* ssl3_get_client_hello does this */ |
| s->client_version=(v[0]<<8)|v[1]; |
| #endif |
| s->handshake_func=s->method->ssl_accept; |
| } |
| |
| if ((type < 1) || (type > 3)) |
| { |
| /* bad, very bad */ |
| OPENSSL_PUT_ERROR(SSL, ssl23_get_client_hello, SSL_R_UNKNOWN_PROTOCOL); |
| goto err; |
| } |
| s->init_num=0; |
| |
| if (buf != buf_space) OPENSSL_free(buf); |
| return(SSL_accept(s)); |
| err: |
| if (buf != buf_space) OPENSSL_free(buf); |
| return(-1); |
| } |