# 32Blit Firmware

This repository includes firmware for the 32Blit that lets you manage games on SD card, and copy or flash games via USB serial.

In order to use it, you will need to:

1. Build and install the 32Blit firmware (if you don't have it already)
2. [Build the flash loader](32Blit-Loader.md) tool in `tools/src`
3. Flash the firmware to your 32Blit

You must make sure you have an ARM GCC cross-compile environment set up on your computer, refer to the relevant documentation below:

* [Windows](Windows-WSL.md)
* [Linux](Linux.md)
* [macOS](macOS.md)
* [ChromeOS](ChromeOS.md)

These instructions assume that you will create build directories in the *root* of this repository.

# Building & Flashing The 32Blit Firmware

## Building The Firmware

From the root of the repository prepare cmake to target 32Blit if you haven't already:

```
mkdir build.stm32
cd build.stm32
cmake .. -DCMAKE_TOOLCHAIN_FILE=../32blit.toolchain
```

Now build the firmware binary and dfu files (for Linux/macOS and Windows flashing respectively):

```
make flash-loader
```

## Flashing The Firmware To Your 32Blit

### Prepare the device

To enter DFU mode either hold the X & Y buttons and press the reset button or select `dfu mode` from the on device menu. The screen will go dark, this is normal.

### Linux and macOS

Install `dfu-util` from your package manager then enter:

```
sudo dfu-util -a 0 -s 0x08000000 -D firmware/flash-loader/flash-loader.bin
```

### Windows

You will need [DfuSe Demonstration from st.com](https://www.st.com/en/development-tools/stsw-stm32080.html)) to flash `flash-loader.dfu` to your device.

Once installed you should be able, from the `build.stm32` directory you created earlier, to flash 32Blit's firmware by running:

```
../tools/wsl-flash firmware/flash-loader/flash-loader.dfu
```

Note: `wsl-flash` uses a hard-coded path to DfuSe 3.0.6 in `c:\Program Files (x86)`

If this fails you can run the `DfusSeDemo` application and pick your 32Blit (it should be "STM Device in DFU Mode") from the "Available USB Devices" drop down.

In the "Upload Action" section hit "Choose" and select the `flash-loader.dfu` file you built earlier. (It should be in `build.stm32/firmware/flash-loader/flash-loader.dfu`) and finally hit "Upgrade" to flash the file.

## Troubleshooting

### Finding The Right DFU Device

If you have more than one device in DFU mode connected to your computer then find the 32blit using `lsusb` and add `-d vid:pid` to the dfu-util command. Replace `vid:pid` with the 4 character ID strings to target the correct device.