blob: a04933021c4bb7dded39cbf6adefc7d8e927e9fa [file] [log] [blame]
/**
* \file ctr_drbg.h
*
* \brief CTR_DRBG based on AES-256 (NIST SP 800-90)
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CTR_DRBG_H
#define MBEDTLS_CTR_DRBG_H
#include "aes.h"
#if defined(MBEDTLS_THREADING_C)
#include "mbedtls/threading.h"
#endif
#define MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED -0x0034 /**< The entropy source failed. */
#define MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG -0x0036 /**< Too many random requested in single call. */
#define MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG -0x0038 /**< Input too large (Entropy + additional). */
#define MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR -0x003A /**< Read/write error in file. */
#define MBEDTLS_CTR_DRBG_BLOCKSIZE 16 /**< Block size used by the cipher */
#define MBEDTLS_CTR_DRBG_KEYSIZE 32 /**< Key size used by the cipher */
#define MBEDTLS_CTR_DRBG_KEYBITS ( MBEDTLS_CTR_DRBG_KEYSIZE * 8 )
#define MBEDTLS_CTR_DRBG_SEEDLEN ( MBEDTLS_CTR_DRBG_KEYSIZE + MBEDTLS_CTR_DRBG_BLOCKSIZE )
/**< The seed length (counter + AES key) */
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them on the compiler command line.
* \{
*/
#if !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN)
#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
#else
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 32 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
#endif
#endif
#if !defined(MBEDTLS_CTR_DRBG_RESEED_INTERVAL)
#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_REQUEST)
#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
#endif
#if !defined(MBEDTLS_CTR_DRBG_MAX_SEED_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
#endif
/* \} name SECTION: Module settings */
#define MBEDTLS_CTR_DRBG_PR_OFF 0 /**< No prediction resistance */
#define MBEDTLS_CTR_DRBG_PR_ON 1 /**< Prediction resistance enabled */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief CTR_DRBG context structure
*/
typedef struct
{
unsigned char counter[16]; /*!< counter (V) */
int reseed_counter; /*!< reseed counter */
int prediction_resistance; /*!< enable prediction resistance (Automatic
reseed before every random generation) */
size_t entropy_len; /*!< amount of entropy grabbed on each
(re)seed */
int reseed_interval; /*!< reseed interval */
mbedtls_aes_context aes_ctx; /*!< AES context */
/*
* Callbacks (Entropy)
*/
int (*f_entropy)(void *, unsigned char *, size_t);
void *p_entropy; /*!< context for the entropy function */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex;
#endif
}
mbedtls_ctr_drbg_context;
/**
* \brief CTR_DRBG context initialization
* Makes the context ready for mbetls_ctr_drbg_seed() or
* mbedtls_ctr_drbg_free().
*
* \param ctx CTR_DRBG context to be initialized
*/
void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx );
/**
* \brief CTR_DRBG initial seeding
* Seed and setup entropy source for future reseeds.
*
* Note: Personalization data can be provided in addition to the more generic
* entropy source to make this instantiation as unique as possible.
*
* \param ctx CTR_DRBG context to be seeded
* \param f_entropy Entropy callback (p_entropy, buffer to fill, buffer
* length)
* \param p_entropy Entropy context
* \param custom Personalization data (Device specific identifiers)
* (Can be NULL)
* \param len Length of personalization data
*
* \return 0 if successful, or
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED
*/
int mbedtls_ctr_drbg_seed( mbedtls_ctr_drbg_context *ctx,
int (*f_entropy)(void *, unsigned char *, size_t),
void *p_entropy,
const unsigned char *custom,
size_t len );
/**
* \brief Clear CTR_CRBG context data
*
* \param ctx CTR_DRBG context to clear
*/
void mbedtls_ctr_drbg_free( mbedtls_ctr_drbg_context *ctx );
/**
* \brief Enable / disable prediction resistance (Default: Off)
*
* Note: If enabled, entropy is used for ctx->entropy_len before each call!
* Only use this if you have ample supply of good entropy!
*
* \param ctx CTR_DRBG context
* \param resistance MBEDTLS_CTR_DRBG_PR_ON or MBEDTLS_CTR_DRBG_PR_OFF
*/
void mbedtls_ctr_drbg_set_prediction_resistance( mbedtls_ctr_drbg_context *ctx,
int resistance );
/**
* \brief Set the amount of entropy grabbed on each (re)seed
* (Default: MBEDTLS_CTR_DRBG_ENTROPY_LEN)
*
* \param ctx CTR_DRBG context
* \param len Amount of entropy to grab
*/
void mbedtls_ctr_drbg_set_entropy_len( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief Set the reseed interval
* (Default: MBEDTLS_CTR_DRBG_RESEED_INTERVAL)
*
* \param ctx CTR_DRBG context
* \param interval Reseed interval
*/
void mbedtls_ctr_drbg_set_reseed_interval( mbedtls_ctr_drbg_context *ctx,
int interval );
/**
* \brief CTR_DRBG reseeding (extracts data from entropy source)
*
* \param ctx CTR_DRBG context
* \param additional Additional data to add to state (Can be NULL)
* \param len Length of additional data
*
* \return 0 if successful, or
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED
*/
int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional, size_t len );
/**
* \brief CTR_DRBG update state
*
* \param ctx CTR_DRBG context
* \param additional Additional data to update state with
* \param add_len Length of additional data
*
* \note If add_len is greater than MBEDTLS_CTR_DRBG_MAX_SEED_INPUT,
* only the first MBEDTLS_CTR_DRBG_MAX_SEED_INPUT bytes are used,
* the remaining ones are silently discarded.
*/
void mbedtls_ctr_drbg_update( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional, size_t add_len );
/**
* \brief CTR_DRBG generate random with additional update input
*
* Note: Automatically reseeds if reseed_counter is reached.
*
* \param p_rng CTR_DRBG context
* \param output Buffer to fill
* \param output_len Length of the buffer
* \param additional Additional data to update with (Can be NULL)
* \param add_len Length of additional data
*
* \return 0 if successful, or
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED, or
* MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG
*/
int mbedtls_ctr_drbg_random_with_add( void *p_rng,
unsigned char *output, size_t output_len,
const unsigned char *additional, size_t add_len );
/**
* \brief CTR_DRBG generate random
*
* Note: Automatically reseeds if reseed_counter is reached.
*
* \param p_rng CTR_DRBG context
* \param output Buffer to fill
* \param output_len Length of the buffer
*
* \return 0 if successful, or
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED, or
* MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG
*/
int mbedtls_ctr_drbg_random( void *p_rng,
unsigned char *output, size_t output_len );
#if defined(MBEDTLS_FS_IO)
/**
* \brief Write a seed file
*
* \param ctx CTR_DRBG context
* \param path Name of the file
*
* \return 0 if successful,
* MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error, or
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED
*/
int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
/**
* \brief Read and update a seed file. Seed is added to this
* instance
*
* \param ctx CTR_DRBG context
* \param path Name of the file
*
* \return 0 if successful,
* MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error,
* MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
* MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG
*/
int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_ctr_drbg_self_test( int verbose );
/* Internal functions (do not call directly) */
int mbedtls_ctr_drbg_seed_entropy_len( mbedtls_ctr_drbg_context *,
int (*)(void *, unsigned char *, size_t), void *,
const unsigned char *, size_t, size_t );
#ifdef __cplusplus
}
#endif
#endif /* ctr_drbg.h */