| /** |
| * \file chacha20.h |
| * |
| * \brief This file contains ChaCha20 definitions and functions. |
| * |
| * ChaCha20 is a stream cipher that can encrypt and decrypt |
| * information. ChaCha was created by Daniel Bernstein as a variant of |
| * its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf |
| * ChaCha20 is the variant with 20 rounds, that was also standardized |
| * in RFC 7539. |
| * |
| * \author Daniel King <damaki.gh@gmail.com> |
| */ |
| |
| /* |
| * Copyright The Mbed TLS Contributors |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef MBEDTLS_CHACHA20_H |
| #define MBEDTLS_CHACHA20_H |
| #include "mbedtls/private_access.h" |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "mbedtls/config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include <stdint.h> |
| #include <stddef.h> |
| |
| #define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /**< Invalid input parameter(s). */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if !defined(MBEDTLS_CHACHA20_ALT) |
| |
| typedef struct mbedtls_chacha20_context |
| { |
| uint32_t MBEDTLS_PRIVATE(state)[16]; /*! The state (before round operations). */ |
| uint8_t MBEDTLS_PRIVATE(keystream8)[64]; /*! Leftover keystream bytes. */ |
| size_t MBEDTLS_PRIVATE(keystream_bytes_used); /*! Number of keystream bytes already used. */ |
| } |
| mbedtls_chacha20_context; |
| |
| #else /* MBEDTLS_CHACHA20_ALT */ |
| #include "chacha20_alt.h" |
| #endif /* MBEDTLS_CHACHA20_ALT */ |
| |
| /** |
| * \brief This function initializes the specified ChaCha20 context. |
| * |
| * It must be the first API called before using |
| * the context. |
| * |
| * It is usually followed by calls to |
| * \c mbedtls_chacha20_setkey() and |
| * \c mbedtls_chacha20_starts(), then one or more calls to |
| * to \c mbedtls_chacha20_update(), and finally to |
| * \c mbedtls_chacha20_free(). |
| * |
| * \param ctx The ChaCha20 context to initialize. |
| * This must not be \c NULL. |
| */ |
| void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx ); |
| |
| /** |
| * \brief This function releases and clears the specified |
| * ChaCha20 context. |
| * |
| * \param ctx The ChaCha20 context to clear. This may be \c NULL, |
| * in which case this function is a no-op. If it is not |
| * \c NULL, it must point to an initialized context. |
| * |
| */ |
| void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx ); |
| |
| /** |
| * \brief This function sets the encryption/decryption key. |
| * |
| * \note After using this function, you must also call |
| * \c mbedtls_chacha20_starts() to set a nonce before you |
| * start encrypting/decrypting data with |
| * \c mbedtls_chacha_update(). |
| * |
| * \param ctx The ChaCha20 context to which the key should be bound. |
| * It must be initialized. |
| * \param key The encryption/decryption key. This must be \c 32 Bytes |
| * in length. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL. |
| */ |
| int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx, |
| const unsigned char key[32] ); |
| |
| /** |
| * \brief This function sets the nonce and initial counter value. |
| * |
| * \note A ChaCha20 context can be re-used with the same key by |
| * calling this function to change the nonce. |
| * |
| * \warning You must never use the same nonce twice with the same key. |
| * This would void any confidentiality guarantees for the |
| * messages encrypted with the same nonce and key. |
| * |
| * \param ctx The ChaCha20 context to which the nonce should be bound. |
| * It must be initialized and bound to a key. |
| * \param nonce The nonce. This must be \c 12 Bytes in size. |
| * \param counter The initial counter value. This is usually \c 0. |
| * |
| * \return \c 0 on success. |
| * \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is |
| * NULL. |
| */ |
| int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx, |
| const unsigned char nonce[12], |
| uint32_t counter ); |
| |
| /** |
| * \brief This function encrypts or decrypts data. |
| * |
| * Since ChaCha20 is a stream cipher, the same operation is |
| * used for encrypting and decrypting data. |
| * |
| * \note The \p input and \p output pointers must either be equal or |
| * point to non-overlapping buffers. |
| * |
| * \note \c mbedtls_chacha20_setkey() and |
| * \c mbedtls_chacha20_starts() must be called at least once |
| * to setup the context before this function can be called. |
| * |
| * \note This function can be called multiple times in a row in |
| * order to encrypt of decrypt data piecewise with the same |
| * key and nonce. |
| * |
| * \param ctx The ChaCha20 context to use for encryption or decryption. |
| * It must be initialized and bound to a key and nonce. |
| * \param size The length of the input data in Bytes. |
| * \param input The buffer holding the input data. |
| * This pointer can be \c NULL if `size == 0`. |
| * \param output The buffer holding the output data. |
| * This must be able to hold \p size Bytes. |
| * This pointer can be \c NULL if `size == 0`. |
| * |
| * \return \c 0 on success. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx, |
| size_t size, |
| const unsigned char *input, |
| unsigned char *output ); |
| |
| /** |
| * \brief This function encrypts or decrypts data with ChaCha20 and |
| * the given key and nonce. |
| * |
| * Since ChaCha20 is a stream cipher, the same operation is |
| * used for encrypting and decrypting data. |
| * |
| * \warning You must never use the same (key, nonce) pair more than |
| * once. This would void any confidentiality guarantees for |
| * the messages encrypted with the same nonce and key. |
| * |
| * \note The \p input and \p output pointers must either be equal or |
| * point to non-overlapping buffers. |
| * |
| * \param key The encryption/decryption key. |
| * This must be \c 32 Bytes in length. |
| * \param nonce The nonce. This must be \c 12 Bytes in size. |
| * \param counter The initial counter value. This is usually \c 0. |
| * \param size The length of the input data in Bytes. |
| * \param input The buffer holding the input data. |
| * This pointer can be \c NULL if `size == 0`. |
| * \param output The buffer holding the output data. |
| * This must be able to hold \p size Bytes. |
| * This pointer can be \c NULL if `size == 0`. |
| * |
| * \return \c 0 on success. |
| * \return A negative error code on failure. |
| */ |
| int mbedtls_chacha20_crypt( const unsigned char key[32], |
| const unsigned char nonce[12], |
| uint32_t counter, |
| size_t size, |
| const unsigned char* input, |
| unsigned char* output ); |
| |
| #if defined(MBEDTLS_SELF_TEST) |
| /** |
| * \brief The ChaCha20 checkup routine. |
| * |
| * \return \c 0 on success. |
| * \return \c 1 on failure. |
| */ |
| int mbedtls_chacha20_self_test( int verbose ); |
| #endif /* MBEDTLS_SELF_TEST */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* MBEDTLS_CHACHA20_H */ |