pigweed / third_party / github / ARMmbed / mbedtls / 0687b2b2360e95183b50bd4f970045d4347fa264 / . / include / psa / crypto_extra.h

/** | |

* \file psa/crypto_extra.h | |

* | |

* \brief PSA cryptography module: Mbed TLS vendor extensions | |

* | |

* \note This file may not be included directly. Applications must | |

* include psa/crypto.h. | |

* | |

* This file is reserved for vendor-specific definitions. | |

*/ | |

/* | |

* Copyright The Mbed TLS Contributors | |

* SPDX-License-Identifier: Apache-2.0 | |

* | |

* Licensed under the Apache License, Version 2.0 (the "License"); you may | |

* not use this file except in compliance with the License. | |

* You may obtain a copy of the License at | |

* | |

* http://www.apache.org/licenses/LICENSE-2.0 | |

* | |

* Unless required by applicable law or agreed to in writing, software | |

* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |

* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |

* See the License for the specific language governing permissions and | |

* limitations under the License. | |

*/ | |

#ifndef PSA_CRYPTO_EXTRA_H | |

#define PSA_CRYPTO_EXTRA_H | |

#include "mbedtls/platform_util.h" | |

#include "crypto_compat.h" | |

#ifdef __cplusplus | |

extern "C" { | |

#endif | |

/* UID for secure storage seed */ | |

#define PSA_CRYPTO_ITS_RANDOM_SEED_UID 0xFFFFFF52 | |

/* See config.h for definition */ | |

#if !defined(MBEDTLS_PSA_KEY_SLOT_COUNT) | |

#define MBEDTLS_PSA_KEY_SLOT_COUNT 32 | |

#endif | |

/** \addtogroup attributes | |

* @{ | |

*/ | |

/** \brief Declare the enrollment algorithm for a key. | |

* | |

* An operation on a key may indifferently use the algorithm set with | |

* psa_set_key_algorithm() or with this function. | |

* | |

* \param[out] attributes The attribute structure to write to. | |

* \param alg2 A second algorithm that the key may be used | |

* for, in addition to the algorithm set with | |

* psa_set_key_algorithm(). | |

* | |

* \warning Setting an enrollment algorithm is not recommended, because | |

* using the same key with different algorithms can allow some | |

* attacks based on arithmetic relations between different | |

* computations made with the same key, or can escalate harmless | |

* side channels into exploitable ones. Use this function only | |

* if it is necessary to support a protocol for which it has been | |

* verified that the usage of the key with multiple algorithms | |

* is safe. | |

*/ | |

static inline void psa_set_key_enrollment_algorithm( | |

psa_key_attributes_t *attributes, | |

psa_algorithm_t alg2) | |

{ | |

attributes->core.policy.alg2 = alg2; | |

} | |

/** Retrieve the enrollment algorithm policy from key attributes. | |

* | |

* \param[in] attributes The key attribute structure to query. | |

* | |

* \return The enrollment algorithm stored in the attribute structure. | |

*/ | |

static inline psa_algorithm_t psa_get_key_enrollment_algorithm( | |

const psa_key_attributes_t *attributes) | |

{ | |

return( attributes->core.policy.alg2 ); | |

} | |

#if defined(MBEDTLS_PSA_CRYPTO_SE_C) | |

/** Retrieve the slot number where a key is stored. | |

* | |

* A slot number is only defined for keys that are stored in a secure | |

* element. | |

* | |

* This information is only useful if the secure element is not entirely | |

* managed through the PSA Cryptography API. It is up to the secure | |

* element driver to decide how PSA slot numbers map to any other interface | |

* that the secure element may have. | |

* | |

* \param[in] attributes The key attribute structure to query. | |

* \param[out] slot_number On success, the slot number containing the key. | |

* | |

* \retval #PSA_SUCCESS | |

* The key is located in a secure element, and \p *slot_number | |

* indicates the slot number that contains it. | |

* \retval #PSA_ERROR_NOT_PERMITTED | |

* The caller is not permitted to query the slot number. | |

* Mbed Crypto currently does not return this error. | |

* \retval #PSA_ERROR_INVALID_ARGUMENT | |

* The key is not located in a secure element. | |

*/ | |

psa_status_t psa_get_key_slot_number( | |

const psa_key_attributes_t *attributes, | |

psa_key_slot_number_t *slot_number ); | |

/** Choose the slot number where a key is stored. | |

* | |

* This function declares a slot number in the specified attribute | |

* structure. | |

* | |

* A slot number is only meaningful for keys that are stored in a secure | |

* element. It is up to the secure element driver to decide how PSA slot | |

* numbers map to any other interface that the secure element may have. | |

* | |

* \note Setting a slot number in key attributes for a key creation can | |

* cause the following errors when creating the key: | |

* - #PSA_ERROR_NOT_SUPPORTED if the selected secure element does | |

* not support choosing a specific slot number. | |

* - #PSA_ERROR_NOT_PERMITTED if the caller is not permitted to | |

* choose slot numbers in general or to choose this specific slot. | |

* - #PSA_ERROR_INVALID_ARGUMENT if the chosen slot number is not | |

* valid in general or not valid for this specific key. | |

* - #PSA_ERROR_ALREADY_EXISTS if there is already a key in the | |

* selected slot. | |

* | |

* \param[out] attributes The attribute structure to write to. | |

* \param slot_number The slot number to set. | |

*/ | |

static inline void psa_set_key_slot_number( | |

psa_key_attributes_t *attributes, | |

psa_key_slot_number_t slot_number ) | |

{ | |

attributes->core.flags |= MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER; | |

attributes->slot_number = slot_number; | |

} | |

/** Remove the slot number attribute from a key attribute structure. | |

* | |

* This function undoes the action of psa_set_key_slot_number(). | |

* | |

* \param[out] attributes The attribute structure to write to. | |

*/ | |

static inline void psa_clear_key_slot_number( | |

psa_key_attributes_t *attributes ) | |

{ | |

attributes->core.flags &= ~MBEDTLS_PSA_KA_FLAG_HAS_SLOT_NUMBER; | |

} | |

/** Register a key that is already present in a secure element. | |

* | |

* The key must be located in a secure element designated by the | |

* lifetime field in \p attributes, in the slot set with | |

* psa_set_key_slot_number() in the attribute structure. | |

* This function makes the key available through the key identifier | |

* specified in \p attributes. | |

* | |

* \param[in] attributes The attributes of the existing key. | |

* | |

* \retval #PSA_SUCCESS | |

* The key was successfully registered. | |

* Note that depending on the design of the driver, this may or may | |

* not guarantee that a key actually exists in the designated slot | |

* and is compatible with the specified attributes. | |

* \retval #PSA_ERROR_ALREADY_EXISTS | |

* There is already a key with the identifier specified in | |

* \p attributes. | |

* \retval #PSA_ERROR_NOT_SUPPORTED | |

* The secure element driver for the specified lifetime does not | |

* support registering a key. | |

* \retval #PSA_ERROR_INVALID_ARGUMENT | |

* \p attributes specifies a lifetime which is not located | |

* in a secure element. | |

* \retval #PSA_ERROR_INVALID_ARGUMENT | |

* No slot number is specified in \p attributes, | |

* or the specified slot number is not valid. | |

* \retval #PSA_ERROR_NOT_PERMITTED | |

* The caller is not authorized to register the specified key slot. | |

* \retval #PSA_ERROR_INSUFFICIENT_MEMORY | |

* \retval #PSA_ERROR_INSUFFICIENT_STORAGE | |

* \retval #PSA_ERROR_COMMUNICATION_FAILURE | |

* \retval #PSA_ERROR_DATA_INVALID | |

* \retval #PSA_ERROR_DATA_CORRUPT | |

* \retval #PSA_ERROR_CORRUPTION_DETECTED | |

* \retval #PSA_ERROR_BAD_STATE | |

* The library has not been previously initialized by psa_crypto_init(). | |

* It is implementation-dependent whether a failure to initialize | |

* results in this error code. | |

*/ | |

psa_status_t mbedtls_psa_register_se_key( | |

const psa_key_attributes_t *attributes); | |

#endif /* MBEDTLS_PSA_CRYPTO_SE_C */ | |

/**@}*/ | |

/** | |

* \brief Library deinitialization. | |

* | |

* This function clears all data associated with the PSA layer, | |

* including the whole key store. | |

* | |

* This is an Mbed TLS extension. | |

*/ | |

void mbedtls_psa_crypto_free( void ); | |

/** \brief Statistics about | |

* resource consumption related to the PSA keystore. | |

* | |

* \note The content of this structure is not part of the stable API and ABI | |

* of Mbed Crypto and may change arbitrarily from version to version. | |

*/ | |

typedef struct mbedtls_psa_stats_s | |

{ | |

/** Number of slots containing key material for a volatile key. */ | |

size_t volatile_slots; | |

/** Number of slots containing key material for a key which is in | |

* internal persistent storage. */ | |

size_t persistent_slots; | |

/** Number of slots containing a reference to a key in a | |

* secure element. */ | |

size_t external_slots; | |

/** Number of slots which are occupied, but do not contain | |

* key material yet. */ | |

size_t half_filled_slots; | |

/** Number of slots that contain cache data. */ | |

size_t cache_slots; | |

/** Number of slots that are not used for anything. */ | |

size_t empty_slots; | |

/** Number of slots that are locked. */ | |

size_t locked_slots; | |

/** Largest key id value among open keys in internal persistent storage. */ | |

psa_key_id_t max_open_internal_key_id; | |

/** Largest key id value among open keys in secure elements. */ | |

psa_key_id_t max_open_external_key_id; | |

} mbedtls_psa_stats_t; | |

/** \brief Get statistics about | |

* resource consumption related to the PSA keystore. | |

* | |

* \note When Mbed Crypto is built as part of a service, with isolation | |

* between the application and the keystore, the service may or | |

* may not expose this function. | |

*/ | |

void mbedtls_psa_get_stats( mbedtls_psa_stats_t *stats ); | |

/** | |

* \brief Inject an initial entropy seed for the random generator into | |

* secure storage. | |

* | |

* This function injects data to be used as a seed for the random generator | |

* used by the PSA Crypto implementation. On devices that lack a trusted | |

* entropy source (preferably a hardware random number generator), | |

* the Mbed PSA Crypto implementation uses this value to seed its | |

* random generator. | |

* | |

* On devices without a trusted entropy source, this function must be | |

* called exactly once in the lifetime of the device. On devices with | |

* a trusted entropy source, calling this function is optional. | |

* In all cases, this function may only be called before calling any | |

* other function in the PSA Crypto API, including psa_crypto_init(). | |

* | |

* When this function returns successfully, it populates a file in | |

* persistent storage. Once the file has been created, this function | |

* can no longer succeed. | |

* | |

* If any error occurs, this function does not change the system state. | |

* You can call this function again after correcting the reason for the | |

* error if possible. | |

* | |

* \warning This function **can** fail! Callers MUST check the return status. | |

* | |

* \warning If you use this function, you should use it as part of a | |

* factory provisioning process. The value of the injected seed | |

* is critical to the security of the device. It must be | |

* *secret*, *unpredictable* and (statistically) *unique per device*. | |

* You should be generate it randomly using a cryptographically | |

* secure random generator seeded from trusted entropy sources. | |

* You should transmit it securely to the device and ensure | |

* that its value is not leaked or stored anywhere beyond the | |

* needs of transmitting it from the point of generation to | |

* the call of this function, and erase all copies of the value | |

* once this function returns. | |

* | |

* This is an Mbed TLS extension. | |

* | |

* \note This function is only available on the following platforms: | |

* * If the compile-time option MBEDTLS_PSA_INJECT_ENTROPY is enabled. | |

* Note that you must provide compatible implementations of | |

* mbedtls_nv_seed_read and mbedtls_nv_seed_write. | |

* * In a client-server integration of PSA Cryptography, on the client side, | |

* if the server supports this feature. | |

* \param[in] seed Buffer containing the seed value to inject. | |

* \param[in] seed_size Size of the \p seed buffer. | |

* The size of the seed in bytes must be greater | |

* or equal to both #MBEDTLS_ENTROPY_MIN_PLATFORM | |

* and #MBEDTLS_ENTROPY_BLOCK_SIZE. | |

* It must be less or equal to | |

* #MBEDTLS_ENTROPY_MAX_SEED_SIZE. | |

* | |

* \retval #PSA_SUCCESS | |

* The seed value was injected successfully. The random generator | |

* of the PSA Crypto implementation is now ready for use. | |

* You may now call psa_crypto_init() and use the PSA Crypto | |

* implementation. | |

* \retval #PSA_ERROR_INVALID_ARGUMENT | |

* \p seed_size is out of range. | |

* \retval #PSA_ERROR_STORAGE_FAILURE | |

* There was a failure reading or writing from storage. | |

* \retval #PSA_ERROR_NOT_PERMITTED | |

* The library has already been initialized. It is no longer | |

* possible to call this function. | |

*/ | |

psa_status_t mbedtls_psa_inject_entropy(const uint8_t *seed, | |

size_t seed_size); | |

/** \addtogroup crypto_types | |

* @{ | |

*/ | |

/** DSA public key. | |

* | |

* The import and export format is the | |

* representation of the public key `y = g^x mod p` as a big-endian byte | |

* string. The length of the byte string is the length of the base prime `p` | |

* in bytes. | |

*/ | |

#define PSA_KEY_TYPE_DSA_PUBLIC_KEY ((psa_key_type_t)0x4002) | |

/** DSA key pair (private and public key). | |

* | |

* The import and export format is the | |

* representation of the private key `x` as a big-endian byte string. The | |

* length of the byte string is the private key size in bytes (leading zeroes | |

* are not stripped). | |

* | |

* Determinstic DSA key derivation with psa_generate_derived_key follows | |

* FIPS 186-4 §B.1.2: interpret the byte string as integer | |

* in big-endian order. Discard it if it is not in the range | |

* [0, *N* - 2] where *N* is the boundary of the private key domain | |

* (the prime *p* for Diffie-Hellman, the subprime *q* for DSA, | |

* or the order of the curve's base point for ECC). | |

* Add 1 to the resulting integer and use this as the private key *x*. | |

* | |

*/ | |

#define PSA_KEY_TYPE_DSA_KEY_PAIR ((psa_key_type_t)0x7002) | |

/** Whether a key type is an DSA key (pair or public-only). */ | |

#define PSA_KEY_TYPE_IS_DSA(type) \ | |

(PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY) | |

#define PSA_ALG_DSA_BASE ((psa_algorithm_t)0x06000400) | |

/** DSA signature with hashing. | |

* | |

* This is the signature scheme defined by FIPS 186-4, | |

* with a random per-message secret number (*k*). | |

* | |

* \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that | |

* #PSA_ALG_IS_HASH(\p hash_alg) is true). | |

* This includes #PSA_ALG_ANY_HASH | |

* when specifying the algorithm in a usage policy. | |

* | |

* \return The corresponding DSA signature algorithm. | |

* \return Unspecified if \p hash_alg is not a supported | |

* hash algorithm. | |

*/ | |

#define PSA_ALG_DSA(hash_alg) \ | |

(PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) | |

#define PSA_ALG_DETERMINISTIC_DSA_BASE ((psa_algorithm_t)0x06000500) | |

#define PSA_ALG_DSA_DETERMINISTIC_FLAG PSA_ALG_ECDSA_DETERMINISTIC_FLAG | |

/** Deterministic DSA signature with hashing. | |

* | |

* This is the deterministic variant defined by RFC 6979 of | |

* the signature scheme defined by FIPS 186-4. | |

* | |

* \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that | |

* #PSA_ALG_IS_HASH(\p hash_alg) is true). | |

* This includes #PSA_ALG_ANY_HASH | |

* when specifying the algorithm in a usage policy. | |

* | |

* \return The corresponding DSA signature algorithm. | |

* \return Unspecified if \p hash_alg is not a supported | |

* hash algorithm. | |

*/ | |

#define PSA_ALG_DETERMINISTIC_DSA(hash_alg) \ | |

(PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) | |

#define PSA_ALG_IS_DSA(alg) \ | |

(((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) == \ | |

PSA_ALG_DSA_BASE) | |

#define PSA_ALG_DSA_IS_DETERMINISTIC(alg) \ | |

(((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0) | |

#define PSA_ALG_IS_DETERMINISTIC_DSA(alg) \ | |

(PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg)) | |

#define PSA_ALG_IS_RANDOMIZED_DSA(alg) \ | |

(PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg)) | |

/* We need to expand the sample definition of this macro from | |

* the API definition. */ | |

#undef PSA_ALG_IS_HASH_AND_SIGN | |

#define PSA_ALG_IS_HASH_AND_SIGN(alg) \ | |

(PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) || \ | |

PSA_ALG_IS_DSA(alg) || PSA_ALG_IS_ECDSA(alg)) | |

/**@}*/ | |

/** \addtogroup attributes | |

* @{ | |

*/ | |

/** Custom Diffie-Hellman group. | |

* | |

* For keys of type #PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_FAMILY_CUSTOM) or | |

* #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_FAMILY_CUSTOM), the group data comes | |

* from domain parameters set by psa_set_key_domain_parameters(). | |

*/ | |

#define PSA_DH_FAMILY_CUSTOM ((psa_dh_family_t) 0x7e) | |

/** | |

* \brief Set domain parameters for a key. | |

* | |

* Some key types require additional domain parameters in addition to | |

* the key type identifier and the key size. Use this function instead | |

* of psa_set_key_type() when you need to specify domain parameters. | |

* | |

* The format for the required domain parameters varies based on the key type. | |

* | |

* - For RSA keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY or #PSA_KEY_TYPE_RSA_KEY_PAIR), | |

* the domain parameter data consists of the public exponent, | |

* represented as a big-endian integer with no leading zeros. | |

* This information is used when generating an RSA key pair. | |

* When importing a key, the public exponent is read from the imported | |

* key data and the exponent recorded in the attribute structure is ignored. | |

* As an exception, the public exponent 65537 is represented by an empty | |

* byte string. | |

* - For DSA keys (#PSA_KEY_TYPE_DSA_PUBLIC_KEY or #PSA_KEY_TYPE_DSA_KEY_PAIR), | |

* the `Dss-Parms` format as defined by RFC 3279 §2.3.2. | |

* ``` | |

* Dss-Parms ::= SEQUENCE { | |

* p INTEGER, | |

* q INTEGER, | |

* g INTEGER | |

* } | |

* ``` | |

* - For Diffie-Hellman key exchange keys | |

* (#PSA_KEY_TYPE_DH_PUBLIC_KEY(#PSA_DH_FAMILY_CUSTOM) or | |

* #PSA_KEY_TYPE_DH_KEY_PAIR(#PSA_DH_FAMILY_CUSTOM)), the | |

* `DomainParameters` format as defined by RFC 3279 §2.3.3. | |

* ``` | |

* DomainParameters ::= SEQUENCE { | |

* p INTEGER, -- odd prime, p=jq +1 | |

* g INTEGER, -- generator, g | |

* q INTEGER, -- factor of p-1 | |

* j INTEGER OPTIONAL, -- subgroup factor | |

* validationParms ValidationParms OPTIONAL | |

* } | |

* ValidationParms ::= SEQUENCE { | |

* seed BIT STRING, | |

* pgenCounter INTEGER | |

* } | |

* ``` | |

* | |

* \note This function may allocate memory or other resources. | |

* Once you have called this function on an attribute structure, | |

* you must call psa_reset_key_attributes() to free these resources. | |

* | |

* \note This is an experimental extension to the interface. It may change | |

* in future versions of the library. | |

* | |

* \param[in,out] attributes Attribute structure where the specified domain | |

* parameters will be stored. | |

* If this function fails, the content of | |

* \p attributes is not modified. | |

* \param type Key type (a \c PSA_KEY_TYPE_XXX value). | |

* \param[in] data Buffer containing the key domain parameters. | |

* The content of this buffer is interpreted | |

* according to \p type as described above. | |

* \param data_length Size of the \p data buffer in bytes. | |

* | |

* \retval #PSA_SUCCESS | |

* \retval #PSA_ERROR_INVALID_ARGUMENT | |

* \retval #PSA_ERROR_NOT_SUPPORTED | |

* \retval #PSA_ERROR_INSUFFICIENT_MEMORY | |

*/ | |

psa_status_t psa_set_key_domain_parameters(psa_key_attributes_t *attributes, | |

psa_key_type_t type, | |

const uint8_t *data, | |

size_t data_length); | |

/** | |

* \brief Get domain parameters for a key. | |

* | |

* Get the domain parameters for a key with this function, if any. The format | |

* of the domain parameters written to \p data is specified in the | |

* documentation for psa_set_key_domain_parameters(). | |

* | |

* \note This is an experimental extension to the interface. It may change | |

* in future versions of the library. | |

* | |

* \param[in] attributes The key attribute structure to query. | |

* \param[out] data On success, the key domain parameters. | |

* \param data_size Size of the \p data buffer in bytes. | |

* The buffer is guaranteed to be large | |

* enough if its size in bytes is at least | |

* the value given by | |

* PSA_KEY_DOMAIN_PARAMETERS_SIZE(). | |

* \param[out] data_length On success, the number of bytes | |

* that make up the key domain parameters data. | |

* | |

* \retval #PSA_SUCCESS | |

* \retval #PSA_ERROR_BUFFER_TOO_SMALL | |

*/ | |

psa_status_t psa_get_key_domain_parameters( | |

const psa_key_attributes_t *attributes, | |

uint8_t *data, | |

size_t data_size, | |

size_t *data_length); | |

/** Safe output buffer size for psa_get_key_domain_parameters(). | |

* | |

* This macro returns a compile-time constant if its arguments are | |

* compile-time constants. | |

* | |

* \warning This function may call its arguments multiple times or | |

* zero times, so you should not pass arguments that contain | |

* side effects. | |

* | |

* \note This is an experimental extension to the interface. It may change | |

* in future versions of the library. | |

* | |

* \param key_type A supported key type. | |

* \param key_bits The size of the key in bits. | |

* | |

* \return If the parameters are valid and supported, return | |

* a buffer size in bytes that guarantees that | |

* psa_get_key_domain_parameters() will not fail with | |

* #PSA_ERROR_BUFFER_TOO_SMALL. | |

* If the parameters are a valid combination that is not supported | |

* by the implementation, this macro shall return either a | |

* sensible size or 0. | |

* If the parameters are not valid, the | |

* return value is unspecified. | |

*/ | |

#define PSA_KEY_DOMAIN_PARAMETERS_SIZE(key_type, key_bits) \ | |

(PSA_KEY_TYPE_IS_RSA(key_type) ? sizeof(int) : \ | |

PSA_KEY_TYPE_IS_DH(key_type) ? PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \ | |

PSA_KEY_TYPE_IS_DSA(key_type) ? PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) : \ | |

0) | |

#define PSA_DH_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \ | |

(4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 3 /*without optional parts*/) | |

#define PSA_DSA_KEY_DOMAIN_PARAMETERS_SIZE(key_bits) \ | |

(4 + (PSA_BITS_TO_BYTES(key_bits) + 5) * 2 /*p, g*/ + 34 /*q*/) | |

/**@}*/ | |

/** \defgroup psa_tls_helpers TLS helper functions | |

* @{ | |

*/ | |

#if defined(MBEDTLS_ECP_C) | |

#include <mbedtls/ecp.h> | |

/** Convert an ECC curve identifier from the Mbed TLS encoding to PSA. | |

* | |

* \note This function is provided solely for the convenience of | |

* Mbed TLS and may be removed at any time without notice. | |

* | |

* \param grpid An Mbed TLS elliptic curve identifier | |

* (`MBEDTLS_ECP_DP_xxx`). | |

* \param[out] bits On success, the bit size of the curve. | |

* | |

* \return The corresponding PSA elliptic curve identifier | |

* (`PSA_ECC_FAMILY_xxx`). | |

* \return \c 0 on failure (\p grpid is not recognized). | |

*/ | |

static inline psa_ecc_family_t mbedtls_ecc_group_to_psa( mbedtls_ecp_group_id grpid, | |

size_t *bits ) | |

{ | |

switch( grpid ) | |

{ | |

case MBEDTLS_ECP_DP_SECP192R1: | |

*bits = 192; | |

return( PSA_ECC_FAMILY_SECP_R1 ); | |

case MBEDTLS_ECP_DP_SECP224R1: | |

*bits = 224; | |

return( PSA_ECC_FAMILY_SECP_R1 ); | |

case MBEDTLS_ECP_DP_SECP256R1: | |

*bits = 256; | |

return( PSA_ECC_FAMILY_SECP_R1 ); | |

case MBEDTLS_ECP_DP_SECP384R1: | |

*bits = 384; | |

return( PSA_ECC_FAMILY_SECP_R1 ); | |

case MBEDTLS_ECP_DP_SECP521R1: | |

*bits = 521; | |

return( PSA_ECC_FAMILY_SECP_R1 ); | |

case MBEDTLS_ECP_DP_BP256R1: | |

*bits = 256; | |

return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 ); | |

case MBEDTLS_ECP_DP_BP384R1: | |

*bits = 384; | |

return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 ); | |

case MBEDTLS_ECP_DP_BP512R1: | |

*bits = 512; | |

return( PSA_ECC_FAMILY_BRAINPOOL_P_R1 ); | |

case MBEDTLS_ECP_DP_CURVE25519: | |

*bits = 255; | |

return( PSA_ECC_FAMILY_MONTGOMERY ); | |

case MBEDTLS_ECP_DP_SECP192K1: | |

*bits = 192; | |

return( PSA_ECC_FAMILY_SECP_K1 ); | |

case MBEDTLS_ECP_DP_SECP224K1: | |

*bits = 224; | |

return( PSA_ECC_FAMILY_SECP_K1 ); | |

case MBEDTLS_ECP_DP_SECP256K1: | |

*bits = 256; | |

return( PSA_ECC_FAMILY_SECP_K1 ); | |

case MBEDTLS_ECP_DP_CURVE448: | |

*bits = 448; | |

return( PSA_ECC_FAMILY_MONTGOMERY ); | |

default: | |

*bits = 0; | |

return( 0 ); | |

} | |

} | |

/** Convert an ECC curve identifier from the PSA encoding to Mbed TLS. | |

* | |

* \note This function is provided solely for the convenience of | |

* Mbed TLS and may be removed at any time without notice. | |

* | |

* \param curve A PSA elliptic curve identifier | |

* (`PSA_ECC_FAMILY_xxx`). | |

* \param bits The bit-length of a private key on \p curve. | |

* \param bits_is_sloppy If true, \p bits may be the bit-length rounded up | |

* to the nearest multiple of 8. This allows the caller | |

* to infer the exact curve from the length of a key | |

* which is supplied as a byte string. | |

* | |

* \return The corresponding Mbed TLS elliptic curve identifier | |

* (`MBEDTLS_ECP_DP_xxx`). | |

* \return #MBEDTLS_ECP_DP_NONE if \c curve is not recognized. | |

* \return #MBEDTLS_ECP_DP_NONE if \p bits is not | |

* correct for \p curve. | |

*/ | |

mbedtls_ecp_group_id mbedtls_ecc_group_of_psa( psa_ecc_family_t curve, | |

size_t bits, | |

int bits_is_sloppy ); | |

#endif /* MBEDTLS_ECP_C */ | |

/**@}*/ | |

/** \defgroup psa_external_rng External random generator | |

* @{ | |

*/ | |

#if defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG) | |

/** External random generator function, implemented by the platform. | |

* | |

* When the compile-time option #MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG is enabled, | |

* this function replaces Mbed TLS's entropy and DRBG modules for all | |

* random generation triggered via PSA crypto interfaces. | |

* | |

* \note This random generator must deliver random numbers with cryptographic | |

* quality and high performance. It must supply unpredictable numbers | |

* with a uniform distribution. The implementation of this function | |

* is responsible for ensuring that the random generator is seeded | |

* with sufficient entropy. If you have a hardware TRNG which is slow | |

* or delivers non-uniform output, declare it as an entropy source | |

* with mbedtls_entropy_add_source() instead of enabling this option. | |

* | |

* \param[in,out] context Pointer to the random generator context. | |

* This is all-bits-zero on the first call | |

* and preserved between successive calls. | |

* \param[out] output Output buffer. On success, this buffer | |

* contains random data with a uniform | |

* distribution. | |

* \param output_size The size of the \p output buffer in bytes. | |

* \param[out] output_length On success, set this value to \p output_size. | |

* | |

* \retval #PSA_SUCCESS | |

* Success. The output buffer contains \p output_size bytes of | |

* cryptographic-quality random data, and \c *output_length is | |

* set to \p output_size. | |

* \retval #PSA_ERROR_INSUFFICIENT_ENTROPY | |

* The random generator requires extra entropy and there is no | |

* way to obtain entropy under current environment conditions. | |

* This error should not happen under normal circumstances since | |

* this function is responsible for obtaining as much entropy as | |

* it needs. However implementations of this function may return | |

* #PSA_ERROR_INSUFFICIENT_ENTROPY if there is no way to obtain | |

* entropy without blocking indefinitely. | |

* \retval #PSA_ERROR_HARDWARE_FAILURE | |

* A failure of the random generator hardware that isn't covered | |

* by #PSA_ERROR_INSUFFICIENT_ENTROPY. | |

*/ | |

psa_status_t mbedtls_psa_external_get_random( | |

mbedtls_psa_external_random_context_t *context, | |

uint8_t *output, size_t output_size, size_t *output_length ); | |

#endif /* MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ | |

/**@}*/ | |

#ifdef __cplusplus | |

} | |

#endif | |

#endif /* PSA_CRYPTO_EXTRA_H */ |