| /** |
| * \file ssl_internal.h |
| * |
| * \brief Internal functions shared by the SSL modules |
| */ |
| /* |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| #ifndef MBEDTLS_SSL_INTERNAL_H |
| #define MBEDTLS_SSL_INTERNAL_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "mbedtls/config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include "mbedtls/ssl.h" |
| #include "mbedtls/cipher.h" |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| #include "psa/crypto.h" |
| #endif |
| |
| #if defined(MBEDTLS_MD5_C) |
| #include "mbedtls/md5.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA1_C) |
| #include "mbedtls/sha1.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA256_C) |
| #include "mbedtls/sha256.h" |
| #endif |
| |
| #if defined(MBEDTLS_SHA512_C) |
| #include "mbedtls/sha512.h" |
| #endif |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| #include "mbedtls/ecjpake.h" |
| #endif |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| #include "psa/crypto.h" |
| #include "mbedtls/psa_util.h" |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| |
| #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ |
| !defined(inline) && !defined(__cplusplus) |
| #define inline __inline |
| #endif |
| |
| /* Determine minimum supported version */ |
| #define MBEDTLS_SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 |
| |
| #if defined(MBEDTLS_SSL_PROTO_SSL3) |
| #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_TLS1) |
| #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_1) |
| #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| #define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3 |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_1 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1 */ |
| #endif /* MBEDTLS_SSL_PROTO_SSL3 */ |
| |
| #define MBEDTLS_SSL_MIN_VALID_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 |
| #define MBEDTLS_SSL_MIN_VALID_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 |
| |
| /* Determine maximum supported version */ |
| #define MBEDTLS_SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_1) |
| #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_TLS1) |
| #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 |
| #else |
| #if defined(MBEDTLS_SSL_PROTO_SSL3) |
| #define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0 |
| #endif /* MBEDTLS_SSL_PROTO_SSL3 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_1 */ |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| /* Shorthand for restartable ECC */ |
| #if defined(MBEDTLS_ECP_RESTARTABLE) && \ |
| defined(MBEDTLS_SSL_CLI_C) && \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) |
| #define MBEDTLS_SSL__ECP_RESTARTABLE |
| #endif |
| |
| #define MBEDTLS_SSL_INITIAL_HANDSHAKE 0 |
| #define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */ |
| #define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */ |
| #define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */ |
| |
| /* |
| * DTLS retransmission states, see RFC 6347 4.2.4 |
| * |
| * The SENDING state is merged in PREPARING for initial sends, |
| * but is distinct for resends. |
| * |
| * Note: initial state is wrong for server, but is not used anyway. |
| */ |
| #define MBEDTLS_SSL_RETRANS_PREPARING 0 |
| #define MBEDTLS_SSL_RETRANS_SENDING 1 |
| #define MBEDTLS_SSL_RETRANS_WAITING 2 |
| #define MBEDTLS_SSL_RETRANS_FINISHED 3 |
| |
| /* |
| * Allow extra bytes for record, authentication and encryption overhead: |
| * counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256) |
| * and allow for a maximum of 1024 of compression expansion if |
| * enabled. |
| */ |
| #if defined(MBEDTLS_ZLIB_SUPPORT) |
| #define MBEDTLS_SSL_COMPRESSION_ADD 1024 |
| #else |
| #define MBEDTLS_SSL_COMPRESSION_ADD 0 |
| #endif |
| |
| #if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER) || \ |
| ( defined(MBEDTLS_CIPHER_MODE_CBC) && \ |
| ( defined(MBEDTLS_AES_C) || \ |
| defined(MBEDTLS_CAMELLIA_C) || \ |
| defined(MBEDTLS_ARIA_C) || \ |
| defined(MBEDTLS_DES_C) ) ) |
| #define MBEDTLS_SSL_SOME_MODES_USE_MAC |
| #endif |
| |
| #if defined(MBEDTLS_SSL_SOME_MODES_USE_MAC) |
| /* Ciphersuites using HMAC */ |
| #if defined(MBEDTLS_SHA512_C) |
| #define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */ |
| #elif defined(MBEDTLS_SHA256_C) |
| #define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */ |
| #else |
| #define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */ |
| #endif |
| #else /* MBEDTLS_SSL_SOME_MODES_USE_MAC */ |
| /* AEAD ciphersuites: GCM and CCM use a 128 bits tag */ |
| #define MBEDTLS_SSL_MAC_ADD 16 |
| #endif |
| |
| #if defined(MBEDTLS_CIPHER_MODE_CBC) |
| #define MBEDTLS_SSL_PADDING_ADD 256 |
| #else |
| #define MBEDTLS_SSL_PADDING_ADD 0 |
| #endif |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_MAX_CID_EXPANSION MBEDTLS_SSL_CID_PADDING_GRANULARITY |
| #else |
| #define MBEDTLS_SSL_MAX_CID_EXPANSION 0 |
| #endif |
| |
| #define MBEDTLS_SSL_PAYLOAD_OVERHEAD ( MBEDTLS_SSL_COMPRESSION_ADD + \ |
| MBEDTLS_MAX_IV_LENGTH + \ |
| MBEDTLS_SSL_MAC_ADD + \ |
| MBEDTLS_SSL_PADDING_ADD + \ |
| MBEDTLS_SSL_MAX_CID_EXPANSION \ |
| ) |
| |
| #define MBEDTLS_SSL_IN_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ |
| ( MBEDTLS_SSL_IN_CONTENT_LEN ) ) |
| |
| #define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ |
| ( MBEDTLS_SSL_OUT_CONTENT_LEN ) ) |
| |
| /* The maximum number of buffered handshake messages. */ |
| #define MBEDTLS_SSL_MAX_BUFFERED_HS 4 |
| |
| /* Maximum length we can advertise as our max content length for |
| RFC 6066 max_fragment_length extension negotiation purposes |
| (the lesser of both sizes, if they are unequal.) |
| */ |
| #define MBEDTLS_TLS_EXT_ADV_CONTENT_LEN ( \ |
| (MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN) \ |
| ? ( MBEDTLS_SSL_OUT_CONTENT_LEN ) \ |
| : ( MBEDTLS_SSL_IN_CONTENT_LEN ) \ |
| ) |
| |
| /* |
| * Check that we obey the standard's message size bounds |
| */ |
| |
| #if MBEDTLS_SSL_MAX_CONTENT_LEN > 16384 |
| #error "Bad configuration - record content too large." |
| #endif |
| |
| #if MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN |
| #error "Bad configuration - incoming record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN." |
| #endif |
| |
| #if MBEDTLS_SSL_OUT_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN |
| #error "Bad configuration - outgoing record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN." |
| #endif |
| |
| #if MBEDTLS_SSL_IN_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048 |
| #error "Bad configuration - incoming protected record payload too large." |
| #endif |
| |
| #if MBEDTLS_SSL_OUT_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048 |
| #error "Bad configuration - outgoing protected record payload too large." |
| #endif |
| |
| /* Calculate buffer sizes */ |
| |
| /* Note: Even though the TLS record header is only 5 bytes |
| long, we're internally using 8 bytes to store the |
| implicit sequence number. */ |
| #define MBEDTLS_SSL_HEADER_LEN 13 |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_IN_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) ) |
| #else |
| #define MBEDTLS_SSL_IN_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) \ |
| + ( MBEDTLS_SSL_CID_IN_LEN_MAX ) ) |
| #endif |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| #define MBEDTLS_SSL_OUT_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) ) |
| #else |
| #define MBEDTLS_SSL_OUT_BUFFER_LEN \ |
| ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) \ |
| + ( MBEDTLS_SSL_CID_OUT_LEN_MAX ) ) |
| #endif |
| |
| #ifdef MBEDTLS_ZLIB_SUPPORT |
| /* Compression buffer holds both IN and OUT buffers, so should be size of the larger */ |
| #define MBEDTLS_SSL_COMPRESS_BUFFER_LEN ( \ |
| ( MBEDTLS_SSL_IN_BUFFER_LEN > MBEDTLS_SSL_OUT_BUFFER_LEN ) \ |
| ? MBEDTLS_SSL_IN_BUFFER_LEN \ |
| : MBEDTLS_SSL_OUT_BUFFER_LEN \ |
| ) |
| #endif |
| |
| /* |
| * TLS extension flags (for extensions with outgoing ServerHello content |
| * that need it (e.g. for RENEGOTIATION_INFO the server already knows because |
| * of state of the renegotiation flag, so no indicator is required) |
| */ |
| #define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0) |
| #define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1) |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) |
| /* |
| * Abstraction for a grid of allowed signature-hash-algorithm pairs. |
| */ |
| struct mbedtls_ssl_sig_hash_set_t |
| { |
| /* At the moment, we only need to remember a single suitable |
| * hash algorithm per signature algorithm. As long as that's |
| * the case - and we don't need a general lookup function - |
| * we can implement the sig-hash-set as a map from signatures |
| * to hash algorithms. */ |
| mbedtls_md_type_t rsa; |
| mbedtls_md_type_t ecdsa; |
| }; |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 && |
| MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ |
| |
| typedef int mbedtls_ssl_tls_prf_cb( const unsigned char *secret, size_t slen, |
| const char *label, |
| const unsigned char *random, size_t rlen, |
| unsigned char *dstbuf, size_t dlen ); |
| /* |
| * This structure contains the parameters only needed during handshake. |
| */ |
| struct mbedtls_ssl_handshake_params |
| { |
| /* |
| * Handshake specific crypto variables |
| */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) |
| mbedtls_ssl_sig_hash_set_t hash_algs; /*!< Set of suitable sig-hash pairs */ |
| #endif |
| #if defined(MBEDTLS_DHM_C) |
| mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */ |
| #endif |
| #if defined(MBEDTLS_ECDH_C) |
| mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */ |
| |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_ecc_curve_t ecdh_psa_curve; |
| psa_key_handle_t ecdh_psa_privkey; |
| unsigned char ecdh_psa_peerkey[MBEDTLS_PSA_MAX_EC_PUBKEY_LENGTH]; |
| size_t ecdh_psa_peerkey_len; |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| #endif /* MBEDTLS_ECDH_C */ |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */ |
| #if defined(MBEDTLS_SSL_CLI_C) |
| unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */ |
| size_t ecjpake_cache_len; /*!< Length of cached data */ |
| #endif |
| #endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ |
| #if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \ |
| defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) |
| const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */ |
| #endif |
| #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_key_handle_t psk_opaque; /*!< Opaque PSK from the callback */ |
| #endif /* MBEDTLS_USE_PSA_CRYPTO */ |
| unsigned char *psk; /*!< PSK from the callback */ |
| size_t psk_len; /*!< Length of PSK from callback */ |
| #endif /* MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED */ |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */ |
| #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) |
| int sni_authmode; /*!< authmode from SNI callback */ |
| mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */ |
| mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */ |
| mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */ |
| #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| #if defined(MBEDTLS_SSL__ECP_RESTARTABLE) |
| int ecrs_enabled; /*!< Handshake supports EC restart? */ |
| mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */ |
| enum { /* this complements ssl->state with info on intra-state operations */ |
| ssl_ecrs_none = 0, /*!< nothing going on (yet) */ |
| ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */ |
| ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */ |
| ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */ |
| ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */ |
| } ecrs_state; /*!< current (or last) operation */ |
| mbedtls_x509_crt *ecrs_peer_cert; /*!< The peer's CRT chain. */ |
| size_t ecrs_n; /*!< place for saving a length */ |
| #endif |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) && \ |
| !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) |
| mbedtls_pk_context peer_pubkey; /*!< The public key from the peer. */ |
| #endif /* MBEDTLS_X509_CRT_PARSE_C && !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */ |
| unsigned int in_msg_seq; /*!< Incoming handshake sequence number */ |
| |
| unsigned char *verify_cookie; /*!< Cli: HelloVerifyRequest cookie |
| Srv: unused */ |
| unsigned char verify_cookie_len; /*!< Cli: cookie length |
| Srv: flag for sending a cookie */ |
| |
| uint32_t retransmit_timeout; /*!< Current value of timeout */ |
| unsigned char retransmit_state; /*!< Retransmission state */ |
| mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */ |
| mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */ |
| unsigned char *cur_msg_p; /*!< Position in current message */ |
| unsigned int in_flight_start_seq; /*!< Minimum message sequence in the |
| flight being received */ |
| mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for |
| resending messages */ |
| unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter |
| for resending messages */ |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| /* The state of CID configuration in this handshake. */ |
| |
| uint8_t cid_in_use; /*!< This indicates whether the use of the CID extension |
| * has been negotiated. Possible values are |
| * #MBEDTLS_SSL_CID_ENABLED and |
| * #MBEDTLS_SSL_CID_DISABLED. */ |
| unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; /*! The peer's CID */ |
| uint8_t peer_cid_len; /*!< The length of |
| * \c peer_cid. */ |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| |
| struct |
| { |
| size_t total_bytes_buffered; /*!< Cumulative size of heap allocated |
| * buffers used for message buffering. */ |
| |
| uint8_t seen_ccs; /*!< Indicates if a CCS message has |
| * been seen in the current flight. */ |
| |
| struct mbedtls_ssl_hs_buffer |
| { |
| unsigned is_valid : 1; |
| unsigned is_fragmented : 1; |
| unsigned is_complete : 1; |
| unsigned char *data; |
| size_t data_len; |
| } hs[MBEDTLS_SSL_MAX_BUFFERED_HS]; |
| |
| struct |
| { |
| unsigned char *data; |
| size_t len; |
| unsigned epoch; |
| } future_record; |
| |
| } buffering; |
| |
| uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */ |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| /* |
| * Checksum contexts |
| */ |
| #if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_1) |
| mbedtls_md5_context fin_md5; |
| mbedtls_sha1_context fin_sha1; |
| #endif |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| #if defined(MBEDTLS_SHA256_C) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_hash_operation_t fin_sha256_psa; |
| #else |
| mbedtls_sha256_context fin_sha256; |
| #endif |
| #endif |
| #if defined(MBEDTLS_SHA512_C) |
| #if defined(MBEDTLS_USE_PSA_CRYPTO) |
| psa_hash_operation_t fin_sha384_psa; |
| #else |
| mbedtls_sha512_context fin_sha512; |
| #endif |
| #endif |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t); |
| void (*calc_verify)(const mbedtls_ssl_context *, unsigned char *); |
| void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int); |
| mbedtls_ssl_tls_prf_cb *tls_prf; |
| |
| mbedtls_ssl_ciphersuite_t const *ciphersuite_info; |
| |
| size_t pmslen; /*!< premaster length */ |
| |
| unsigned char randbytes[64]; /*!< random bytes */ |
| unsigned char premaster[MBEDTLS_PREMASTER_SIZE]; |
| /*!< premaster secret */ |
| |
| int resume; /*!< session resume indicator*/ |
| int max_major_ver; /*!< max. major version client*/ |
| int max_minor_ver; /*!< max. minor version client*/ |
| int cli_exts; /*!< client extension presence*/ |
| |
| #if defined(MBEDTLS_SSL_SESSION_TICKETS) |
| int new_session_ticket; /*!< use NewSessionTicket? */ |
| #endif /* MBEDTLS_SSL_SESSION_TICKETS */ |
| #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) |
| int extended_ms; /*!< use Extended Master Secret? */ |
| #endif |
| |
| #if defined(MBEDTLS_SSL_ASYNC_PRIVATE) |
| unsigned int async_in_progress : 1; /*!< an asynchronous operation is in progress */ |
| #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ |
| |
| #if defined(MBEDTLS_SSL_ASYNC_PRIVATE) |
| /** Asynchronous operation context. This field is meant for use by the |
| * asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start, |
| * mbedtls_ssl_config::f_async_decrypt_start, |
| * mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel). |
| * The library does not use it internally. */ |
| void *user_async_ctx; |
| #endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ |
| }; |
| |
| typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer; |
| |
| /* |
| * Representation of decryption/encryption transformations on records |
| * |
| * There are the following general types of record transformations: |
| * - Stream transformations (TLS versions <= 1.2 only) |
| * Transformation adding a MAC and applying a stream-cipher |
| * to the authenticated message. |
| * - CBC block cipher transformations ([D]TLS versions <= 1.2 only) |
| * In addition to the distinction of the order of encryption and |
| * authentication, there's a fundamental difference between the |
| * handling in SSL3 & TLS 1.0 and TLS 1.1 and TLS 1.2: For SSL3 |
| * and TLS 1.0, the final IV after processing a record is used |
| * as the IV for the next record. No explicit IV is contained |
| * in an encrypted record. The IV for the first record is extracted |
| * at key extraction time. In contrast, for TLS 1.1 and 1.2, no |
| * IV is generated at key extraction time, but every encrypted |
| * record is explicitly prefixed by the IV with which it was encrypted. |
| * - AEAD transformations ([D]TLS versions >= 1.2 only) |
| * These come in two fundamentally different versions, the first one |
| * used in TLS 1.2, excluding ChaChaPoly ciphersuites, and the second |
| * one used for ChaChaPoly ciphersuites in TLS 1.2 as well as for TLS 1.3. |
| * In the first transformation, the IV to be used for a record is obtained |
| * as the concatenation of an explicit, static 4-byte IV and the 8-byte |
| * record sequence number, and explicitly prepending this sequence number |
| * to the encrypted record. In contrast, in the second transformation |
| * the IV is obtained by XOR'ing a static IV obtained at key extraction |
| * time with the 8-byte record sequence number, without prepending the |
| * latter to the encrypted record. |
| * |
| * In addition to type and version, the following parameters are relevant: |
| * - The symmetric cipher algorithm to be used. |
| * - The (static) encryption/decryption keys for the cipher. |
| * - For stream/CBC, the type of message digest to be used. |
| * - For stream/CBC, (static) encryption/decryption keys for the digest. |
| * - For AEAD transformations, the size (potentially 0) of an explicit, |
| * random initialization vector placed in encrypted records. |
| * - For some transformations (currently AEAD and CBC in SSL3 and TLS 1.0) |
| * an implicit IV. It may be static (e.g. AEAD) or dynamic (e.g. CBC) |
| * and (if present) is combined with the explicit IV in a transformation- |
| * dependent way (e.g. appending in TLS 1.2 and XOR'ing in TLS 1.3). |
| * - For stream/CBC, a flag determining the order of encryption and MAC. |
| * - The details of the transformation depend on the SSL/TLS version. |
| * - The length of the authentication tag. |
| * |
| * Note: Except for CBC in SSL3 and TLS 1.0, these parameters are |
| * constant across multiple encryption/decryption operations. |
| * For CBC, the implicit IV needs to be updated after each |
| * operation. |
| * |
| * The struct below refines this abstract view as follows: |
| * - The cipher underlying the transformation is managed in |
| * cipher contexts cipher_ctx_{enc/dec}, which must have the |
| * same cipher type. The mode of these cipher contexts determines |
| * the type of the transformation in the sense above: e.g., if |
| * the type is MBEDTLS_CIPHER_AES_256_CBC resp. MBEDTLS_CIPHER_AES_192_GCM |
| * then the transformation has type CBC resp. AEAD. |
| * - The cipher keys are never stored explicitly but |
| * are maintained within cipher_ctx_{enc/dec}. |
| * - For stream/CBC transformations, the message digest contexts |
| * used for the MAC's are stored in md_ctx_{enc/dec}. These contexts |
| * are unused for AEAD transformations. |
| * - For stream/CBC transformations and versions > SSL3, the |
| * MAC keys are not stored explicitly but maintained within |
| * md_ctx_{enc/dec}. |
| * - For stream/CBC transformations and version SSL3, the MAC |
| * keys are stored explicitly in mac_enc, mac_dec and have |
| * a fixed size of 20 bytes. These fields are unused for |
| * AEAD transformations or transformations >= TLS 1.0. |
| * - For transformations using an implicit IV maintained within |
| * the transformation context, its contents are stored within |
| * iv_{enc/dec}. |
| * - The value of ivlen indicates the length of the IV. |
| * This is redundant in case of stream/CBC transformations |
| * which always use 0 resp. the cipher's block length as the |
| * IV length, but is needed for AEAD ciphers and may be |
| * different from the underlying cipher's block length |
| * in this case. |
| * - The field fixed_ivlen is nonzero for AEAD transformations only |
| * and indicates the length of the static part of the IV which is |
| * constant throughout the communication, and which is stored in |
| * the first fixed_ivlen bytes of the iv_{enc/dec} arrays. |
| * Note: For CBC in SSL3 and TLS 1.0, the fields iv_{enc/dec} |
| * still store IV's for continued use across multiple transformations, |
| * so it is not true that fixed_ivlen == 0 means that iv_{enc/dec} are |
| * not being used! |
| * - minor_ver denotes the SSL/TLS version |
| * - For stream/CBC transformations, maclen denotes the length of the |
| * authentication tag, while taglen is unused and 0. |
| * - For AEAD transformations, taglen denotes the length of the |
| * authentication tag, while maclen is unused and 0. |
| * - For CBC transformations, encrypt_then_mac determines the |
| * order of encryption and authentication. This field is unused |
| * in other transformations. |
| * |
| */ |
| struct mbedtls_ssl_transform |
| { |
| /* |
| * Session specific crypto layer |
| */ |
| size_t minlen; /*!< min. ciphertext length */ |
| size_t ivlen; /*!< IV length */ |
| size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */ |
| size_t maclen; /*!< MAC(CBC) len */ |
| size_t taglen; /*!< TAG(AEAD) len */ |
| |
| unsigned char iv_enc[16]; /*!< IV (encryption) */ |
| unsigned char iv_dec[16]; /*!< IV (decryption) */ |
| |
| #if defined(MBEDTLS_SSL_SOME_MODES_USE_MAC) |
| |
| #if defined(MBEDTLS_SSL_PROTO_SSL3) |
| /* Needed only for SSL v3.0 secret */ |
| unsigned char mac_enc[20]; /*!< SSL v3.0 secret (enc) */ |
| unsigned char mac_dec[20]; /*!< SSL v3.0 secret (dec) */ |
| #endif /* MBEDTLS_SSL_PROTO_SSL3 */ |
| |
| mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */ |
| mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */ |
| |
| #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) |
| int encrypt_then_mac; /*!< flag for EtM activation */ |
| #endif |
| |
| #endif /* MBEDTLS_SSL_SOME_MODES_USE_MAC */ |
| |
| mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */ |
| mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */ |
| int minor_ver; |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| uint8_t in_cid_len; |
| uint8_t out_cid_len; |
| unsigned char in_cid [ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; |
| unsigned char out_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| |
| /* |
| * Session specific compression layer |
| */ |
| #if defined(MBEDTLS_ZLIB_SUPPORT) |
| z_stream ctx_deflate; /*!< compression context */ |
| z_stream ctx_inflate; /*!< decompression context */ |
| #endif |
| }; |
| |
| /* |
| * Internal representation of record frames |
| * |
| * Instances come in two flavors: |
| * (1) Encrypted |
| * These always have data_offset = 0 |
| * (2) Unencrypted |
| * These have data_offset set to the amount of |
| * pre-expansion during record protection. Concretely, |
| * this is the length of the fixed part of the explicit IV |
| * used for encryption, or 0 if no explicit IV is used |
| * (e.g. for CBC in TLS 1.0, or stream ciphers). |
| * |
| * The reason for the data_offset in the unencrypted case |
| * is to allow for in-place conversion of an unencrypted to |
| * an encrypted record. If the offset wasn't included, the |
| * encrypted content would need to be shifted afterwards to |
| * make space for the fixed IV. |
| * |
| */ |
| #if MBEDTLS_SSL_CID_OUT_LEN_MAX > MBEDTLS_SSL_CID_IN_LEN_MAX |
| #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_OUT_LEN_MAX |
| #else |
| #define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_IN_LEN_MAX |
| #endif |
| |
| typedef struct |
| { |
| uint8_t ctr[8]; /* In TLS: The implicit record sequence number. |
| * In DTLS: The 2-byte epoch followed by |
| * the 6-byte sequence number. |
| * This is stored as a raw big endian byte array |
| * as opposed to a uint64_t because we rarely |
| * need to perform arithmetic on this, but do |
| * need it as a Byte array for the purpose of |
| * MAC computations. */ |
| uint8_t type; /* The record content type. */ |
| uint8_t ver[2]; /* SSL/TLS version as present on the wire. |
| * Convert to internal presentation of versions |
| * using mbedtls_ssl_read_version() and |
| * mbedtls_ssl_write_version(). |
| * Keep wire-format for MAC computations. */ |
| |
| unsigned char *buf; /* Memory buffer enclosing the record content */ |
| size_t buf_len; /* Buffer length */ |
| size_t data_offset; /* Offset of record content */ |
| size_t data_len; /* Length of record content */ |
| |
| #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) |
| uint8_t cid_len; /* Length of the CID (0 if not present) */ |
| unsigned char cid[ MBEDTLS_SSL_CID_LEN_MAX ]; /* The CID */ |
| #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ |
| } mbedtls_record; |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| /* |
| * List of certificate + private key pairs |
| */ |
| struct mbedtls_ssl_key_cert |
| { |
| mbedtls_x509_crt *cert; /*!< cert */ |
| mbedtls_pk_context *key; /*!< private key */ |
| mbedtls_ssl_key_cert *next; /*!< next key/cert pair */ |
| }; |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| /* |
| * List of handshake messages kept around for resending |
| */ |
| struct mbedtls_ssl_flight_item |
| { |
| unsigned char *p; /*!< message, including handshake headers */ |
| size_t len; /*!< length of p */ |
| unsigned char type; /*!< type of the message: handshake or CCS */ |
| mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */ |
| }; |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ |
| defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) |
| |
| /* Find an entry in a signature-hash set matching a given hash algorithm. */ |
| mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_pk_type_t sig_alg ); |
| /* Add a signature-hash-pair to a signature-hash set */ |
| void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_pk_type_t sig_alg, |
| mbedtls_md_type_t md_alg ); |
| /* Allow exactly one hash algorithm for each signature. */ |
| void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set, |
| mbedtls_md_type_t md_alg ); |
| |
| /* Setup an empty signature-hash set */ |
| static inline void mbedtls_ssl_sig_hash_set_init( mbedtls_ssl_sig_hash_set_t *set ) |
| { |
| mbedtls_ssl_sig_hash_set_const_hash( set, MBEDTLS_MD_NONE ); |
| } |
| |
| #endif /* MBEDTLS_SSL_PROTO_TLS1_2) && |
| MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ |
| |
| /** |
| * \brief Free referenced items in an SSL transform context and clear |
| * memory |
| * |
| * \param transform SSL transform context |
| */ |
| void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform ); |
| |
| /** |
| * \brief Free referenced items in an SSL handshake context and clear |
| * memory |
| * |
| * \param ssl SSL context |
| */ |
| void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl ); |
| |
| void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl ); |
| |
| /** |
| * \brief Update record layer |
| * |
| * This function roughly separates the implementation |
| * of the logic of (D)TLS from the implementation |
| * of the secure transport. |
| * |
| * \param ssl The SSL context to use. |
| * \param update_hs_digest This indicates if the handshake digest |
| * should be automatically updated in case |
| * a handshake message is found. |
| * |
| * \return 0 or non-zero error code. |
| * |
| * \note A clarification on what is called 'record layer' here |
| * is in order, as many sensible definitions are possible: |
| * |
| * The record layer takes as input an untrusted underlying |
| * transport (stream or datagram) and transforms it into |
| * a serially multiplexed, secure transport, which |
| * conceptually provides the following: |
| * |
| * (1) Three datagram based, content-agnostic transports |
| * for handshake, alert and CCS messages. |
| * (2) One stream- or datagram-based transport |
| * for application data. |
| * (3) Functionality for changing the underlying transform |
| * securing the contents. |
| * |
| * The interface to this functionality is given as follows: |
| * |
| * a Updating |
| * [Currently implemented by mbedtls_ssl_read_record] |
| * |
| * Check if and on which of the four 'ports' data is pending: |
| * Nothing, a controlling datagram of type (1), or application |
| * data (2). In any case data is present, internal buffers |
| * provide access to the data for the user to process it. |
| * Consumption of type (1) datagrams is done automatically |
| * on the next update, invalidating that the internal buffers |
| * for previous datagrams, while consumption of application |
| * data (2) is user-controlled. |
| * |
| * b Reading of application data |
| * [Currently manual adaption of ssl->in_offt pointer] |
| * |
| * As mentioned in the last paragraph, consumption of data |
| * is different from the automatic consumption of control |
| * datagrams (1) because application data is treated as a stream. |
| * |
| * c Tracking availability of application data |
| * [Currently manually through decreasing ssl->in_msglen] |
| * |
| * For efficiency and to retain datagram semantics for |
| * application data in case of DTLS, the record layer |
| * provides functionality for checking how much application |
| * data is still available in the internal buffer. |
| * |
| * d Changing the transformation securing the communication. |
| * |
| * Given an opaque implementation of the record layer in the |
| * above sense, it should be possible to implement the logic |
| * of (D)TLS on top of it without the need to know anything |
| * about the record layer's internals. This is done e.g. |
| * in all the handshake handling functions, and in the |
| * application data reading function mbedtls_ssl_read. |
| * |
| * \note The above tries to give a conceptual picture of the |
| * record layer, but the current implementation deviates |
| * from it in some places. For example, our implementation of |
| * the update functionality through mbedtls_ssl_read_record |
| * discards datagrams depending on the current state, which |
| * wouldn't fall under the record layer's responsibility |
| * following the above definition. |
| * |
| */ |
| int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl, |
| unsigned update_hs_digest ); |
| int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want ); |
| |
| int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, uint8_t force_flush ); |
| int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl ); |
| |
| int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl ); |
| |
| void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl, |
| const mbedtls_ssl_ciphersuite_t *ciphersuite_info ); |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) |
| int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex ); |
| #endif |
| |
| #if defined(MBEDTLS_PK_C) |
| unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk ); |
| unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type ); |
| mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig ); |
| #endif |
| |
| mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash ); |
| unsigned char mbedtls_ssl_hash_from_md_alg( int md ); |
| int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md ); |
| |
| #if defined(MBEDTLS_ECP_C) |
| int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id ); |
| #endif |
| |
| #if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) |
| int mbedtls_ssl_check_sig_hash( const mbedtls_ssl_context *ssl, |
| mbedtls_md_type_t md ); |
| #endif |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl ) |
| { |
| mbedtls_ssl_key_cert *key_cert; |
| |
| if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) |
| key_cert = ssl->handshake->key_cert; |
| else |
| key_cert = ssl->conf->key_cert; |
| |
| return( key_cert == NULL ? NULL : key_cert->key ); |
| } |
| |
| static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl ) |
| { |
| mbedtls_ssl_key_cert *key_cert; |
| |
| if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) |
| key_cert = ssl->handshake->key_cert; |
| else |
| key_cert = ssl->conf->key_cert; |
| |
| return( key_cert == NULL ? NULL : key_cert->cert ); |
| } |
| |
| /* |
| * Check usage of a certificate wrt extensions: |
| * keyUsage, extendedKeyUsage (later), and nSCertType (later). |
| * |
| * Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we |
| * check a cert we received from them)! |
| * |
| * Return 0 if everything is OK, -1 if not. |
| */ |
| int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert, |
| const mbedtls_ssl_ciphersuite_t *ciphersuite, |
| int cert_endpoint, |
| uint32_t *flags ); |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| void mbedtls_ssl_write_version( int major, int minor, int transport, |
| unsigned char ver[2] ); |
| void mbedtls_ssl_read_version( int *major, int *minor, int transport, |
| const unsigned char ver[2] ); |
| |
| static inline size_t mbedtls_ssl_in_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| #if !defined(MBEDTLS_SSL_PROTO_DTLS) |
| ((void) ssl); |
| #endif |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) |
| { |
| return( 13 ); |
| } |
| else |
| #endif /* MBEDTLS_SSL_PROTO_DTLS */ |
| { |
| return( 5 ); |
| } |
| } |
| |
| static inline size_t mbedtls_ssl_out_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| return( (size_t) ( ssl->out_iv - ssl->out_hdr ) ); |
| } |
| |
| static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl ) |
| { |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) |
| return( 12 ); |
| #else |
| ((void) ssl); |
| #endif |
| return( 4 ); |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_DTLS) |
| void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl ); |
| void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_resend( mbedtls_ssl_context *ssl ); |
| int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl ); |
| #endif |
| |
| /* Visible for testing purposes only */ |
| #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) |
| int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context const *ssl ); |
| void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl ); |
| #endif |
| |
| int mbedtls_ssl_session_copy( mbedtls_ssl_session *dst, |
| const mbedtls_ssl_session *src ); |
| |
| /* constant-time buffer comparison */ |
| static inline int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n ) |
| { |
| size_t i; |
| volatile const unsigned char *A = (volatile const unsigned char *) a; |
| volatile const unsigned char *B = (volatile const unsigned char *) b; |
| volatile unsigned char diff = 0; |
| |
| for( i = 0; i < n; i++ ) |
| { |
| /* Read volatile data in order before computing diff. |
| * This avoids IAR compiler warning: |
| * 'the order of volatile accesses is undefined ..' */ |
| unsigned char x = A[i], y = B[i]; |
| diff |= x ^ y; |
| } |
| |
| return( diff ); |
| } |
| |
| #if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_1) |
| int mbedtls_ssl_get_key_exchange_md_ssl_tls( mbedtls_ssl_context *ssl, |
| unsigned char *output, |
| unsigned char *data, size_t data_len ); |
| #endif /* MBEDTLS_SSL_PROTO_SSL3 || MBEDTLS_SSL_PROTO_TLS1 || \ |
| MBEDTLS_SSL_PROTO_TLS1_1 */ |
| |
| #if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1) || \ |
| defined(MBEDTLS_SSL_PROTO_TLS1_2) |
| /* The hash buffer must have at least MBEDTLS_MD_MAX_SIZE bytes of length. */ |
| int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl, |
| unsigned char *hash, size_t *hashlen, |
| unsigned char *data, size_t data_len, |
| mbedtls_md_type_t md_alg ); |
| #endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \ |
| MBEDTLS_SSL_PROTO_TLS1_2 */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| void mbedtls_ssl_transform_init( mbedtls_ssl_transform *transform ); |
| int mbedtls_ssl_encrypt_buf( mbedtls_ssl_context *ssl, |
| mbedtls_ssl_transform *transform, |
| mbedtls_record *rec, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ); |
| int mbedtls_ssl_decrypt_buf( mbedtls_ssl_context const *ssl, |
| mbedtls_ssl_transform *transform, |
| mbedtls_record *rec ); |
| |
| #endif /* ssl_internal.h */ |