diff --git a/ChangeLog b/ChangeLog
index 7b50534..348864c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1730,7 +1730,7 @@
      issuer_key_identifier, etc)
    * Optional blinding for RSA, DHM and EC
    * Support for multiple active certificate / key pairs in SSL servers for
-   	 the same host (Not to be confused with SNI!)
+     the same host (Not to be confused with SNI!)
 
 Changes
    * Ability to enable / disable SSL v3 / TLS 1.0 / TLS 1.1 / TLS 1.2
@@ -1961,7 +1961,7 @@
      PKCS#8 private key formats
    * Added mechanism to provide alternative implementations for all
      symmetric cipher and hash algorithms (e.g. POLARSSL_AES_ALT in
-	 config.h)
+     config.h)
    * PKCS#5 module added. Moved PBKDF2 functionality inside and deprecated
      old PBKDF2 module
 
@@ -1973,7 +1973,7 @@
    * x509parse_crt() now better handles PEM error situations
    * ssl_parse_certificate() now calls x509parse_crt_der() directly
      instead of the x509parse_crt() wrapper that can also parse PEM
-	 certificates
+     certificates
    * x509parse_crtpath() is now reentrant and uses more portable stat()
    * Fixed bignum.c and bn_mul.h to support Thumb2 and LLVM compiler
    * Fixed values for 2-key Triple DES in cipher layer
@@ -2131,7 +2131,7 @@
    * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
      #52)
    * Handle encryption with private key and decryption with public key as per
-   	 RFC 2313
+     RFC 2313
    * Handle empty certificate subject names
    * Prevent reading over buffer boundaries on X509 certificate parsing
    * mpi_add_abs() now correctly handles adding short numbers to long numbers
@@ -2162,7 +2162,7 @@
    * x509parse_crt() now better handles PEM error situations
    * ssl_parse_certificate() now calls x509parse_crt_der() directly
      instead of the x509parse_crt() wrapper that can also parse PEM
-	 certificates
+     certificates
    * Fixed values for 2-key Triple DES in cipher layer
    * ssl_write_certificate_request() can handle empty ca_chain
 
@@ -2243,16 +2243,16 @@
 Features
    * Added ssl_session_reset() to allow better multi-connection pools of
      SSL contexts without needing to set all non-connection-specific
-	 data and pointers again. Adapted ssl_server to use this functionality.
+     data and pointers again. Adapted ssl_server to use this functionality.
    * Added ssl_set_max_version() to allow clients to offer a lower maximum
      supported version to a server to help buggy server implementations.
-	 (Closes ticket #36)
+     (Closes ticket #36)
    * Added cipher_get_cipher_mode() and cipher_get_cipher_operation()
      introspection functions (Closes ticket #40)
    * Added CTR_DRBG based on AES-256-CTR (NIST SP 800-90) random generator
    * Added a generic entropy accumulator that provides support for adding
      custom entropy sources and added some generic and platform dependent
-	 entropy sources
+     entropy sources
 
 Changes
    * Documentation for AES and Camellia in modes CTR and CFB128 clarified.
@@ -2385,7 +2385,7 @@
    * Corrected parsing of UTCTime dates before 1990 and
      after 1950
    * Support more exotic OID's when parsing certificates
-   	 (found by Mads Kiilerich)
+     (found by Mads Kiilerich)
    * Support more exotic name representations when parsing
      certificates (found by Mads Kiilerich)
    * Replaced the expired test certificates
@@ -2415,7 +2415,7 @@
          status, objects and configuration
        + Added verification callback on certificate chain
          verification to allow external blacklisting
-	   + Additional example programs to show usage
+       + Additional example programs to show usage
    * Added support for PKCS#11 through the use of the
      libpkcs11-helper library
 
diff --git a/Makefile b/Makefile
index c18b99b..a0fcb2b 100644
--- a/Makefile
+++ b/Makefile
@@ -24,12 +24,12 @@
 install: no_test
 	mkdir -p $(DESTDIR)/include/mbedtls
 	cp -r include/mbedtls $(DESTDIR)/include
-	
+
 	mkdir -p $(DESTDIR)/lib
 	cp -RP library/libmbedtls.*    $(DESTDIR)/lib
 	cp -RP library/libmbedx509.*   $(DESTDIR)/lib
 	cp -RP library/libmbedcrypto.* $(DESTDIR)/lib
-	
+
 	mkdir -p $(DESTDIR)/bin
 	for p in programs/*/* ; do              \
 	    if [ -x $$p ] && [ ! -d $$p ] ;     \
@@ -44,7 +44,7 @@
 	rm -f $(DESTDIR)/lib/libmbedtls.*
 	rm -f $(DESTDIR)/lib/libmbedx509.*
 	rm -f $(DESTDIR)/lib/libmbedcrypto.*
-	
+
 	for p in programs/*/* ; do              \
 	    if [ -x $$p ] && [ ! -d $$p ] ;     \
 	    then                                \
diff --git a/include/mbedtls/dhm.h b/include/mbedtls/dhm.h
index f848e22..75317a8 100644
--- a/include/mbedtls/dhm.h
+++ b/include/mbedtls/dhm.h
@@ -1,12 +1,12 @@
 /**
  * \file dhm.h
  *
- * \brief   This file contains Diffie-Hellman-Merkle (DHM) key exchange 
+ * \brief   This file contains Diffie-Hellman-Merkle (DHM) key exchange
  *          definitions and functions.
  *
  * Diffie-Hellman-Merkle (DHM) key exchange is defined in
- * <em>RFC-2631: Diffie-Hellman Key Agreement Method</em> and 
- * <em>Public-Key Cryptography Standards (PKCS) #3: Diffie 
+ * <em>RFC-2631: Diffie-Hellman Key Agreement Method</em> and
+ * <em>Public-Key Cryptography Standards (PKCS) #3: Diffie
  * Hellman Key Agreement Standard</em>.
  *
  * <em>RFC-3526: More Modular Exponential (MODP) Diffie-Hellman groups for
diff --git a/include/mbedtls/ecdh.h b/include/mbedtls/ecdh.h
index 922f029..5fdf55a 100644
--- a/include/mbedtls/ecdh.h
+++ b/include/mbedtls/ecdh.h
@@ -2,8 +2,8 @@
  * \file ecdh.h
  *
  * \brief This file contains ECDH definitions and functions.
- * 
- * The Elliptic Curve Diffie-Hellman (ECDH) protocol is an anonymous 
+ *
+ * The Elliptic Curve Diffie-Hellman (ECDH) protocol is an anonymous
  * key agreement protocol allowing two parties to establish a shared
  * secret over an insecure channel. Each party must have an
  * elliptic-curve public–private key pair.
diff --git a/include/mbedtls/ecp_internal.h b/include/mbedtls/ecp_internal.h
index 8a6d517..1804069 100644
--- a/include/mbedtls/ecp_internal.h
+++ b/include/mbedtls/ecp_internal.h
@@ -48,7 +48,7 @@
  * [6] Digital Signature Standard (DSS), FIPS 186-4.
  *     <http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-4.pdf>
  *
- * [7] Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer 
+ * [7] Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer
  *     Security (TLS), RFC 4492.
  *     <https://tools.ietf.org/search/rfc4492>
  *
diff --git a/include/mbedtls/entropy.h b/include/mbedtls/entropy.h
index fcb4d02..a5cb05a 100644
--- a/include/mbedtls/entropy.h
+++ b/include/mbedtls/entropy.h
@@ -166,7 +166,7 @@
  * \param threshold Minimum required from source before entropy is released
  *                  ( with mbedtls_entropy_func() ) (in bytes)
  * \param strong    MBEDTLS_ENTROPY_SOURCE_STRONG or
- *                  MBEDTSL_ENTROPY_SOURCE_WEAK.
+ *                  MBEDTLS_ENTROPY_SOURCE_WEAK.
  *                  At least one strong source needs to be added.
  *                  Weaker sources (such as the cycle counter) can be used as
  *                  a complement.
diff --git a/include/mbedtls/gcm.h b/include/mbedtls/gcm.h
index 3c22033..bec5577 100644
--- a/include/mbedtls/gcm.h
+++ b/include/mbedtls/gcm.h
@@ -116,7 +116,7 @@
  * \param ctx       The GCM context to use for encryption or decryption.
  * \param mode      The operation to perform: #MBEDTLS_GCM_ENCRYPT or
  *                  #MBEDTLS_GCM_DECRYPT.
- * \param length    The length of the input data. This must be a multiple of 
+ * \param length    The length of the input data. This must be a multiple of
  *                  16 except in the last call before mbedtls_gcm_finish().
  * \param iv        The initialization vector.
  * \param iv_len    The length of the IV.
diff --git a/include/mbedtls/platform.h b/include/mbedtls/platform.h
index a53229b..bba7709 100644
--- a/include/mbedtls/platform.h
+++ b/include/mbedtls/platform.h
@@ -9,7 +9,7 @@
  *        system services, making the library easier to port and embed.
  *        Application developers and users of the library can provide their own
  *        implementations of these functions, or implementations specific to
- *        their platform, which can be statically linked to the library or 
+ *        their platform, which can be statically linked to the library or
  *        dynamically configured at runtime.
  */
 /*
@@ -331,7 +331,7 @@
  * \note    This function should be called before any other library functions.
  *
  *          Its implementation is platform-specific, and unless
- *          platform-specific code is provided, it does nothing. 
+ *          platform-specific code is provided, it does nothing.
  *
  * \note    The usage and necessity of this function is dependent on the platform.
  *
diff --git a/include/mbedtls/rsa.h b/include/mbedtls/rsa.h
index df6e3e5..19eb2ee 100644
--- a/include/mbedtls/rsa.h
+++ b/include/mbedtls/rsa.h
@@ -5,7 +5,7 @@
  *
  * The RSA public-key cryptosystem is defined in <em>Public-Key
  * Cryptography Standards (PKCS) #1 v1.5: RSA Encryption</em>
- * and <em>Public-Key Cryptography Standards (PKCS) #1 v2.1: 
+ * and <em>Public-Key Cryptography Standards (PKCS) #1 v2.1:
  * RSA Cryptography Specifications</em>.
  *
  */
@@ -781,7 +781,7 @@
  * \param olen       The length of the plaintext.
  * \param input      The buffer holding the encrypted data.
  * \param output     The buffer to hold the plaintext.
- * \param output_max_len    The maximum length of the output buffer. 
+ * \param output_max_len    The maximum length of the output buffer.
  *
  * \return         \c 0 on success.
  * \return         An \c MBEDTLS_ERR_RSA_XXX error code on failure.
diff --git a/include/mbedtls/sha1.h b/include/mbedtls/sha1.h
index 8f805fb..65a124c 100644
--- a/include/mbedtls/sha1.h
+++ b/include/mbedtls/sha1.h
@@ -3,7 +3,7 @@
  *
  * \brief This file contains SHA-1 definitions and functions.
  *
- * The Secure Hash Algorithm 1 (SHA-1) cryptographic hash function is defined in 
+ * The Secure Hash Algorithm 1 (SHA-1) cryptographic hash function is defined in
  * <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
  *
  * \warning   SHA-1 is considered a weak message digest and its use constitutes
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index bb9c02d..f91066d 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -1854,21 +1854,21 @@
 
 #if defined(MBEDTLS_X509_CRT_PARSE_C)
 /**
- * \brief          Set or reset the hostname to check against the received 
- *                 server certificate. It sets the ServerName TLS extension, 
+ * \brief          Set or reset the hostname to check against the received
+ *                 server certificate. It sets the ServerName TLS extension,
  *                 too, if that extension is enabled. (client-side only)
  *
  * \param ssl      SSL context
  * \param hostname the server hostname, may be NULL to clear hostname
- 
+
  * \note           Maximum hostname length MBEDTLS_SSL_MAX_HOST_NAME_LEN.
  *
- * \return         0 if successful, MBEDTLS_ERR_SSL_ALLOC_FAILED on 
- *                 allocation failure, MBEDTLS_ERR_SSL_BAD_INPUT_DATA on 
+ * \return         0 if successful, MBEDTLS_ERR_SSL_ALLOC_FAILED on
+ *                 allocation failure, MBEDTLS_ERR_SSL_BAD_INPUT_DATA on
  *                 too long input hostname.
  *
  *                 Hostname set to the one provided on success (cleared
- *                 when NULL). On allocation failure hostname is cleared. 
+ *                 when NULL). On allocation failure hostname is cleared.
  *                 On too long input failure, old hostname is unchanged.
  */
 int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname );
diff --git a/include/mbedtls/ssl_ciphersuites.h b/include/mbedtls/ssl_ciphersuites.h
index 545468a..1d2aabc 100644
--- a/include/mbedtls/ssl_ciphersuites.h
+++ b/include/mbedtls/ssl_ciphersuites.h
@@ -267,7 +267,7 @@
     defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED)      ||       \
     defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED)     ||       \
     defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED)    ||       \
-    defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) 
+    defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)
 #define MBEDTLS_KEY_EXCHANGE__CERT_REQ_ALLOWED__ENABLED
 #endif
 
diff --git a/library/asn1write.c b/library/asn1write.c
index 69b61b2..c01c836 100644
--- a/library/asn1write.c
+++ b/library/asn1write.c
@@ -232,10 +232,6 @@
     int ret;
     size_t len = 0;
 
-    // TODO negative values and values larger than 128
-    // DER format assumes 2s complement for numbers, so the leftmost bit
-    // should be 0 for positive numbers and 1 for negative numbers.
-    //
     if( *p - start < 1 )
         return( MBEDTLS_ERR_ASN1_BUF_TOO_SMALL );
 
diff --git a/library/ecjpake.c b/library/ecjpake.c
index e8f4086..ec5a400 100644
--- a/library/ecjpake.c
+++ b/library/ecjpake.c
@@ -301,7 +301,7 @@
  */
 static int ecjpake_zkp_write( const mbedtls_md_info_t *md_info,
                               const mbedtls_ecp_group *grp,
-                              const int pf, 
+                              const int pf,
                               const mbedtls_ecp_point *G,
                               const mbedtls_mpi *x,
                               const mbedtls_ecp_point *X,
diff --git a/library/ssl_cli.c b/library/ssl_cli.c
index b3dc4db..7455e99 100644
--- a/library/ssl_cli.c
+++ b/library/ssl_cli.c
@@ -352,7 +352,7 @@
 
     *olen = 6;
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C || 
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ||
           MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
@@ -1281,7 +1281,7 @@
                                     MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE );
     return( MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO );
 }
-#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C || 
+#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C ||
           MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
 
 #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index cf1b694..bc9dc77 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -2445,8 +2445,8 @@
 
             if ( (size_t)ret > len || ( INT_MAX > SIZE_MAX && ret > SIZE_MAX ) )
             {
-                MBEDTLS_SSL_DEBUG_MSG( 1, 
-                    ( "f_recv returned %d bytes but only %lu were requested", 
+                MBEDTLS_SSL_DEBUG_MSG( 1,
+                    ( "f_recv returned %d bytes but only %lu were requested",
                     ret, (unsigned long)len ) );
                 return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
             }
@@ -2500,8 +2500,8 @@
 
         if( (size_t)ret > ssl->out_left || ( INT_MAX > SIZE_MAX && ret > SIZE_MAX ) )
         {
-            MBEDTLS_SSL_DEBUG_MSG( 1, 
-                ( "f_send returned %d bytes but only %lu bytes were sent", 
+            MBEDTLS_SSL_DEBUG_MSG( 1,
+                ( "f_send returned %d bytes but only %lu bytes were sent",
                 ret, (unsigned long)ssl->out_left ) );
             return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
         }
@@ -6950,30 +6950,6 @@
         }
     }
 
-    /*
-     * The logic could be streamlined here. Instead of
-     * - Manually checking whether ssl->in_offt is NULL
-     * - Fetching a new record if yes
-     * - Setting ssl->in_offt if one finds an application record
-     * - Resetting keep_current_message after handling the application data
-     * one should
-     * - Adapt read_record to set ssl->in_offt automatically
-     *   when a new application data record is processed.
-     * - Always call mbedtls_ssl_read_record here.
-     * This way, the logic of ssl_read would be much clearer:
-     * (1) Always call record layer and see what kind of record is on
-     *     and have it ready for consumption (in particular, in_offt
-     *     properly set for application data records).
-     * (2) If it's application data (either freshly fetched
-     *     or something already being partially processed),
-     *     serve the read request from it.
-     * (3) If it's something different from application data,
-     *     handle it accordingly, e.g. potentially start a
-     *     renegotiation.
-     * This will also remove the need to manually reset
-     * ssl->keep_current_message = 0 below.
-     */
-
     /* Loop as long as no application data record is available */
     while( ssl->in_offt == NULL )
     {
diff --git a/library/x509_crt.c b/library/x509_crt.c
index 462cbcf..290c1eb 100644
--- a/library/x509_crt.c
+++ b/library/x509_crt.c
@@ -729,7 +729,7 @@
 
     memcpy( p, buf, crt->raw.len );
 
-    // Direct pointers to the new buffer 
+    // Direct pointers to the new buffer
     p += crt->raw.len - len;
     end = crt_end = p + len;
 
diff --git a/programs/ssl/ssl_client1.c b/programs/ssl/ssl_client1.c
index fa70431..01cee13 100644
--- a/programs/ssl/ssl_client1.c
+++ b/programs/ssl/ssl_client1.c
@@ -30,7 +30,7 @@
 #else
 #include <stdio.h>
 #include <stdlib.h>
-#define mbedtls_time       time 
+#define mbedtls_time       time
 #define mbedtls_time_t     time_t
 #define mbedtls_fprintf    fprintf
 #define mbedtls_printf     printf
diff --git a/programs/ssl/ssl_mail_client.c b/programs/ssl/ssl_mail_client.c
index b49ffb4..04b847a 100644
--- a/programs/ssl/ssl_mail_client.c
+++ b/programs/ssl/ssl_mail_client.c
@@ -31,7 +31,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #define mbedtls_time       time
-#define mbedtls_time_t     time_t 
+#define mbedtls_time_t     time_t
 #define mbedtls_fprintf    fprintf
 #define mbedtls_printf     printf
 #endif
diff --git a/programs/ssl/ssl_server.c b/programs/ssl/ssl_server.c
index fd54f17..dcdafbb 100644
--- a/programs/ssl/ssl_server.c
+++ b/programs/ssl/ssl_server.c
@@ -31,7 +31,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #define mbedtls_time       time
-#define mbedtls_time_t     time_t 
+#define mbedtls_time_t     time_t
 #define mbedtls_fprintf    fprintf
 #define mbedtls_printf     printf
 #endif
diff --git a/tests/compat.sh b/tests/compat.sh
index 34e38f1..a2b2d5b 100755
--- a/tests/compat.sh
+++ b/tests/compat.sh
@@ -998,7 +998,7 @@
             if [ $EXIT -eq 0 ]; then
                 RESULT=0
             else
-                # If the cipher isn't supported... 
+                # If the cipher isn't supported...
                 if grep 'Cipher is (NONE)' $CLI_OUT >/dev/null; then
                     RESULT=1
                 else
diff --git a/tests/scripts/gen_ctr_drbg.pl b/tests/scripts/gen_ctr_drbg.pl
index 66d9b3a..ee13024 100755
--- a/tests/scripts/gen_ctr_drbg.pl
+++ b/tests/scripts/gen_ctr_drbg.pl
@@ -64,7 +64,7 @@
         my $AdditionalInput2 = get_val("AdditionalInput");
         my $EntropyInputPR2 = get_val("EntropyInputPR") if ($PredictionResistance == 1);
         my $ReturnedBits = get_val("ReturnedBits");
-    
+
         if ($PredictionResistance == 1)
         {
             print("CTR_DRBG NIST Validation (AES-256 use df,$PredictionResistanceStr,$EntropyInputLen,$NonceLen,$PersonalizationStringLen,$AdditionalInputLen) #$Count\n");
diff --git a/tests/scripts/gen_pkcs1_v21_sign_verify.pl b/tests/scripts/gen_pkcs1_v21_sign_verify.pl
index 0d7fc7d..678e2f9 100755
--- a/tests/scripts/gen_pkcs1_v21_sign_verify.pl
+++ b/tests/scripts/gen_pkcs1_v21_sign_verify.pl
@@ -18,10 +18,10 @@
         next if($line !~ /^# $str/);
         last;
     }
-        
+
     while(my $line = <TEST_DATA>)
     {
-        last if($line eq "\r\n"); 
+        last if($line eq "\r\n");
         $val .= $line;
     }
 
@@ -66,7 +66,7 @@
         print(":\"$val_salt\"");
         print(":\"$val_sig\":0");
         print("\n\n");
-    } 
+    }
     $cnt++;
 }
 close(TEST_DATA);
diff --git a/tests/suites/main_test.function b/tests/suites/main_test.function
index 1390f9f..bf65bda 100644
--- a/tests/suites/main_test.function
+++ b/tests/suites/main_test.function
@@ -281,7 +281,7 @@
 #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) && \
     !defined(TEST_SUITE_MEMORY_BUFFER_ALLOC)
     unsigned char alloc_buf[1000000];
-#endif 
+#endif
     /* Platform setup should be called in the beginning */
     ret = platform_setup();
     if( ret != 0 )
diff --git a/tests/suites/test_suite_gcm.function b/tests/suites/test_suite_gcm.function
index 308e14b..3d0830e 100644
--- a/tests/suites/test_suite_gcm.function
+++ b/tests/suites/test_suite_gcm.function
@@ -35,7 +35,7 @@
     memset( tag_str, 0x00, sizeof( tag_str ) );
     memset( output, 0x00, sizeof( output ) );
     memset( tag_output, 0x00, sizeof( tag_output ) );
-    
+
     key_len = unhexify( key_str, hex_key_string );
     pt_len = unhexify( src_str, hex_src_string );
     iv_len = unhexify( iv_str, hex_iv_string );
diff --git a/tests/suites/test_suite_mpi.data b/tests/suites/test_suite_mpi.data
index 2a2cfce..c450088 100644
--- a/tests/suites/test_suite_mpi.data
+++ b/tests/suites/test_suite_mpi.data
@@ -301,10 +301,10 @@
 Base test mbedtls_mpi_add_mpi inplace #1
 mbedtls_mpi_add_mpi_inplace:10:"12345678":10:"24691356"
 
-Test mbedtls_mpi_add_mpi inplace #2 
+Test mbedtls_mpi_add_mpi inplace #2
 mbedtls_mpi_add_mpi_inplace:10:"643808006803554439230129854961492699151386107534013432918073439524138264842370630061369715394739134090922937332590384720397133335969549256322620979036686633213903952966175107096769180017646161851573147596390153":10:"1287616013607108878460259709922985398302772215068026865836146879048276529684741260122739430789478268181845874665180769440794266671939098512645241958073373266427807905932350214193538360035292323703146295192780306"
 
-Test mbedtls_mpi_add_mpi inplace #3 
+Test mbedtls_mpi_add_mpi inplace #3
 mbedtls_mpi_add_mpi_inplace:16:"ffffffffffffffffffffffffffffffff":16:"01fffffffffffffffffffffffffffffffe"
 
 Test mbedtls_mpi_add_int #1
diff --git a/tests/suites/test_suite_pkcs1_v15.data b/tests/suites/test_suite_pkcs1_v15.data
index db7a4cd..0309400 100644
--- a/tests/suites/test_suite_pkcs1_v15.data
+++ b/tests/suites/test_suite_pkcs1_v15.data
@@ -13,19 +13,19 @@
 RSAES-V15 Encryption Test Vector Data too long 1
 pkcs1_rsaes_v15_encrypt:1024:16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"b84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"05abded6751d620a95177abdba915027b58dd6eecf4ebe71f71c400b115e1d9e12465ace4db3cc03eb57fcbbfe017770f438cf84c10bad505919aefebfa0752087f6376b055beabf0e089fbb90e10f99c795d2d5676eea196db7f94a8fd34aedaba39fb230281bb9917cc91793eb37f84dedb2421e9680c39cfda34d4a012134":MBEDTLS_ERR_RSA_BAD_INPUT_DATA
 
-RSAES-V15 Decryption Test Vector Padding too short 7 
+RSAES-V15 Decryption Test Vector Padding too short 7
 pkcs1_rsaes_v15_decrypt:1024:16:"eecfae81b1b9b3c908810b10a1b5600199eb9f44aef4fda493b81a9e3d84f632124ef0236e5d1e3b7e28fae7aa040a2d5b252176459d1f397541ba2a58fb6599":16:"c97fb1f027f453f6341233eaaad1d9353f6c42d08866b1d05a0f2035028b9d869840b41666b42e92ea0da3b43204b5cfce3352524d0416a5a441e700af461503":16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"b84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"05abded6751d620a95177abdba915027b58dd6eecf4ebe71f71c400b115e1d9e12465ace4db3cc03eb57fcbbfe017770f438cf84c10bad505919aefebfa0752087f6376b055beabf0e089fbb90e10f99c795d2d5676eea196db7f94a8fd34aedaba39fb230281bb9917cc91793eb37f84dedb2421e9680c39cfda34d4a012134":MBEDTLS_ERR_RSA_INVALID_PADDING
 
 RSAES-V15 Encryption Test Vector Data too long 3
 pkcs1_rsaes_v15_encrypt:1024:16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"aa1ab84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"10d60b8040d57d8701bacb55f2f283d54601ec24d465601ac7f7d5a2f75cac380ba78ca4ab6f3c159f3a9fd6839f5adde0333852ebf876c585664c1a58a1e6885231982f2027be6d7f08ff1807d3ceda8e41ad1f02ddf97a7458832fd13a1f431de6a4ab79e3d4b88bb1df2c5c77fcde9e7b5aa1e7bb29112eae58763127752a":MBEDTLS_ERR_RSA_BAD_INPUT_DATA
 
-RSAES-V15 Decryption Test Vector Padding too short 5 
+RSAES-V15 Decryption Test Vector Padding too short 5
 pkcs1_rsaes_v15_decrypt:1024:16:"eecfae81b1b9b3c908810b10a1b5600199eb9f44aef4fda493b81a9e3d84f632124ef0236e5d1e3b7e28fae7aa040a2d5b252176459d1f397541ba2a58fb6599":16:"c97fb1f027f453f6341233eaaad1d9353f6c42d08866b1d05a0f2035028b9d869840b41666b42e92ea0da3b43204b5cfce3352524d0416a5a441e700af461503":16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"aa1ab84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"10d60b8040d57d8701bacb55f2f283d54601ec24d465601ac7f7d5a2f75cac380ba78ca4ab6f3c159f3a9fd6839f5adde0333852ebf876c585664c1a58a1e6885231982f2027be6d7f08ff1807d3ceda8e41ad1f02ddf97a7458832fd13a1f431de6a4ab79e3d4b88bb1df2c5c77fcde9e7b5aa1e7bb29112eae58763127752a":MBEDTLS_ERR_RSA_INVALID_PADDING
 
 RSAES-V15 Encryption Test Vector Data too long 8
 pkcs1_rsaes_v15_encrypt:1024:16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"a5a384ef64a6acb84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"72f98d12ddc230484179ec3022d11b3719222daaa0dc016fc3dbd6771a3f2c9fdd0560f86d616dd50ef1fa5b8c7e1fc40b5abf7b845d7795b3a6af02457b97f783360575cde7497bdf9c104650d4e9a8f4034406de1af95ace39bef2b9e979b74d9a2c0a741d8a21221d9afc98992776cad52d73151613dbc10da9bd8038751a":MBEDTLS_ERR_RSA_BAD_INPUT_DATA
 
-RSAES-V15 Decryption Test Vector Padding too short 0 
+RSAES-V15 Decryption Test Vector Padding too short 0
 pkcs1_rsaes_v15_decrypt:1024:16:"eecfae81b1b9b3c908810b10a1b5600199eb9f44aef4fda493b81a9e3d84f632124ef0236e5d1e3b7e28fae7aa040a2d5b252176459d1f397541ba2a58fb6599":16:"c97fb1f027f453f6341233eaaad1d9353f6c42d08866b1d05a0f2035028b9d869840b41666b42e92ea0da3b43204b5cfce3352524d0416a5a441e700af461503":16:"bbf82f090682ce9c2338ac2b9da871f7368d07eed41043a440d6b6f07454f51fb8dfbaaf035c02ab61ea48ceeb6fcd4876ed520d60e1ec4619719d8a5b8b807fafb8e0a3dfc737723ee6b4b7d93a2584ee6a649d060953748834b2454598394ee0aab12d7b61a51f527a9a41f6c1687fe2537298ca2a8f5946f8e5fd091dbdcb":16:"11":MBEDTLS_MD_SHA1:"a5a384ef64a6acb84293cecc8095232ae595b84c15ec26f35cf5fde88ae7a9aaa717bcb1ecc4de498da81db97425000770817b5dde5eed01ca3745ff5ab894d0fc0921e5a10b081490129d8ccbaa154ad3dd461397af8ec964ef99402d60a7591ee44b8ce1c16ef88fcb2717076c730d88223893bdd8000b23d87d38ab":"aafd12f659cae63489b479e5076ddec2f06cb58f":"72f98d12ddc230484179ec3022d11b3719222daaa0dc016fc3dbd6771a3f2c9fdd0560f86d616dd50ef1fa5b8c7e1fc40b5abf7b845d7795b3a6af02457b97f783360575cde7497bdf9c104650d4e9a8f4034406de1af95ace39bef2b9e979b74d9a2c0a741d8a21221d9afc98992776cad52d73151613dbc10da9bd8038751a":MBEDTLS_ERR_RSA_INVALID_PADDING
 
 RSASSA-V15 Signing Test Vector Int
diff --git a/tests/suites/test_suite_ssl.function b/tests/suites/test_suite_ssl.function
index 60683af..5cc32ab 100644
--- a/tests/suites/test_suite_ssl.function
+++ b/tests/suites/test_suite_ssl.function
@@ -52,4 +52,4 @@
 
     mbedtls_ssl_free( &ssl );
 }
-/* END_CASE */
\ No newline at end of file
+/* END_CASE */
diff --git a/yotta/data/example-authcrypt/README.md b/yotta/data/example-authcrypt/README.md
index ae4b1ef..4498b9d 100644
--- a/yotta/data/example-authcrypt/README.md
+++ b/yotta/data/example-authcrypt/README.md
@@ -38,11 +38,11 @@
 
 6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. 
 
-	Use the following settings:
+   Use the following settings:
 
-	* 115200 baud (not 9600).
-	* 8N1.
-	* No flow control. 
+    * 115200 baud (not 9600).
+    * 8N1.
+    * No flow control.
 
 7. Press the Reset button on the board.
 
diff --git a/yotta/data/example-benchmark/README.md b/yotta/data/example-benchmark/README.md
index 3b66916..715abee 100644
--- a/yotta/data/example-benchmark/README.md
+++ b/yotta/data/example-benchmark/README.md
@@ -38,11 +38,11 @@
 
 6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. 
 
-	Use the following settings:
+   Use the following settings:
 
-	* 115200 baud (not 9600).
-	* 8N1.
-	* No flow control. 
+    * 115200 baud (not 9600).
+    * 8N1.
+    * No flow control.
 
 7. Press the Reset button on the board.
 
diff --git a/yotta/data/example-hashing/README.md b/yotta/data/example-hashing/README.md
index 553c3a6..6f0f969 100644
--- a/yotta/data/example-hashing/README.md
+++ b/yotta/data/example-hashing/README.md
@@ -38,11 +38,11 @@
 
 6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. 
 
-	Use the following settings:
+   Use the following settings:
 
-	* 115200 baud (not 9600).
-	* 8N1.
-	* No flow control. 
+    * 115200 baud (not 9600).
+    * 8N1.
+    * No flow control.
 
 7. Press the Reset button on the board.
 
diff --git a/yotta/data/example-selftest/README.md b/yotta/data/example-selftest/README.md
index 5bc22a6..b8e9cd4 100644
--- a/yotta/data/example-selftest/README.md
+++ b/yotta/data/example-selftest/README.md
@@ -38,11 +38,11 @@
 
 6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. 
 
-	Use the following settings:
+   Use the following settings:
 
-	* 115200 baud (not 9600).
-	* 8N1.
-	* No flow control. 
+    * 115200 baud (not 9600).
+    * 8N1.
+    * No flow control.
 
 7. Press the Reset button on the board.