- First replacement of xyssl by polarssl where needed
diff --git a/include/polarssl/bignum.h b/include/polarssl/bignum.h
index ec21412..18a1d52 100644
--- a/include/polarssl/bignum.h
+++ b/include/polarssl/bignum.h
@@ -1,29 +1,29 @@
/**
* \file bignum.h
*/
-#ifndef XYSSL_BIGNUM_H
-#define XYSSL_BIGNUM_H
+#ifndef POLARSSL_BIGNUM_H
+#define POLARSSL_BIGNUM_H
#include <stdio.h>
-#define XYSSL_ERR_MPI_FILE_IO_ERROR -0x0002
-#define XYSSL_ERR_MPI_BAD_INPUT_DATA -0x0004
-#define XYSSL_ERR_MPI_INVALID_CHARACTER -0x0006
-#define XYSSL_ERR_MPI_BUFFER_TOO_SMALL -0x0008
-#define XYSSL_ERR_MPI_NEGATIVE_VALUE -0x000A
-#define XYSSL_ERR_MPI_DIVISION_BY_ZERO -0x000C
-#define XYSSL_ERR_MPI_NOT_ACCEPTABLE -0x000E
+#define POLARSSL_ERR_MPI_FILE_IO_ERROR -0x0002
+#define POLARSSL_ERR_MPI_BAD_INPUT_DATA -0x0004
+#define POLARSSL_ERR_MPI_INVALID_CHARACTER -0x0006
+#define POLARSSL_ERR_MPI_BUFFER_TOO_SMALL -0x0008
+#define POLARSSL_ERR_MPI_NEGATIVE_VALUE -0x000A
+#define POLARSSL_ERR_MPI_DIVISION_BY_ZERO -0x000C
+#define POLARSSL_ERR_MPI_NOT_ACCEPTABLE -0x000E
#define MPI_CHK(f) if( ( ret = f ) != 0 ) goto cleanup
/*
* Define the base integer type, architecture-wise
*/
-#if defined(XYSSL_HAVE_INT8)
+#if defined(POLARSSL_HAVE_INT8)
typedef unsigned char t_int;
typedef unsigned short t_dbl;
#else
-#if defined(XYSSL_HAVE_INT16)
+#if defined(POLARSSL_HAVE_INT16)
typedef unsigned short t_int;
typedef unsigned long t_dbl;
#else
@@ -118,7 +118,7 @@
* \param radix input numeric base
* \param s null-terminated string buffer
*
- * \return 0 if successful, or an XYSSL_ERR_MPI_XXX error code
+ * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code
*/
int mpi_read_string( mpi *X, int radix, char *s );
@@ -130,7 +130,7 @@
* \param s string buffer
* \param slen string buffer size
*
- * \return 0 if successful, or an XYSSL_ERR_MPI_XXX error code
+ * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code
*
* \note Call this function with *slen = 0 to obtain the
* minimum required buffer size in *slen.
@@ -144,7 +144,7 @@
* \param radix input numeric base
* \param fin input file handle
*
- * \return 0 if successful, or an XYSSL_ERR_MPI_XXX error code
+ * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code
*/
int mpi_read_file( mpi *X, int radix, FILE *fin );
@@ -156,7 +156,7 @@
* \param radix output numeric base
* \param fout output file handle
*
- * \return 0 if successful, or an XYSSL_ERR_MPI_XXX error code
+ * \return 0 if successful, or an POLARSSL_ERR_MPI_XXX error code
*
* \note Set fout == NULL to print X on the console.
*/
@@ -182,7 +182,7 @@
* \param buflen output buffer size
*
* \return 0 if successful,
- * XYSSL_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough
+ * POLARSSL_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough
*
* \note Call this function with *buflen = 0 to obtain the
* minimum required buffer size in *buflen.
@@ -244,7 +244,7 @@
* \brief Unsigned substraction: X = |A| - |B|
*
* \return 0 if successful,
- * XYSSL_ERR_MPI_NEGATIVE_VALUE if B is greater than A
+ * POLARSSL_ERR_MPI_NEGATIVE_VALUE if B is greater than A
*/
int mpi_sub_abs( mpi *X, mpi *A, mpi *B );
@@ -301,7 +301,7 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0
+ * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0
*
* \note Either Q or R can be NULL.
*/
@@ -312,7 +312,7 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0
+ * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0
*
* \note Either Q or R can be NULL.
*/
@@ -323,7 +323,7 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0
+ * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if B == 0
*/
int mpi_mod_mpi( mpi *R, mpi *A, mpi *B );
@@ -332,7 +332,7 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0
+ * POLARSSL_ERR_MPI_DIVISION_BY_ZERO if b == 0
*/
int mpi_mod_int( t_int *r, mpi *A, int b );
@@ -341,7 +341,7 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or even
+ * POLARSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or even
*
* \note _RR is used to avoid re-computing R*R mod N across
* multiple calls, which speeds up things a bit. It can
@@ -362,8 +362,8 @@
*
* \return 0 if successful,
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or nil
- * XYSSL_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N
+ * POLARSSL_ERR_MPI_BAD_INPUT_DATA if N is negative or nil
+ * POLARSSL_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N
*/
int mpi_inv_mod( mpi *X, mpi *A, mpi *N );
@@ -372,7 +372,7 @@
*
* \return 0 if successful (probably prime),
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_NOT_ACCEPTABLE if X is not prime
+ * POLARSSL_ERR_MPI_NOT_ACCEPTABLE if X is not prime
*/
int mpi_is_prime( mpi *X, int (*f_rng)(void *), void *p_rng );
@@ -387,7 +387,7 @@
*
* \return 0 if successful (probably prime),
* 1 if memory allocation failed,
- * XYSSL_ERR_MPI_BAD_INPUT_DATA if nbits is < 3
+ * POLARSSL_ERR_MPI_BAD_INPUT_DATA if nbits is < 3
*/
int mpi_gen_prime( mpi *X, int nbits, int dh_flag,
int (*f_rng)(void *), void *p_rng );
