diff --git a/ChangeLog b/ChangeLog
index 6cb40ed..bcceebb 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -6,6 +6,10 @@
    * Deprecate MBEDTLS_SSL_HW_RECORD_ACCEL that enables function hooks in the
      SSL module for hardware acceleration of individual records.
 
+Bugfix
+   * Fix compilation failure when both MBEDTLS_SSL_PROTO_DTLS and
+     MBEDTLS_SSL_HW_RECORD_ACCEL are enabled.
+
 Changes
    * Mbed Crypto is no longer a Git submodule. The crypto part of the library
      is back directly in the present repository.
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index bff1e49..d0d6bd9 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -1834,6 +1834,13 @@
 #define MBEDTLS_SSL_TRUNCATED_HMAC
 
 /**
+ * \def MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+ *
+ * Enable modifying the maximum I/O buffer size.
+ */
+//#define MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+
+/**
  * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
  *
  * Fallback to old (pre-2.7), non-conforming implementation of the truncated
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index e93e8f3..1a071fc 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -1215,6 +1215,9 @@
     int in_msgtype;             /*!< record header: message type      */
     size_t in_msglen;           /*!< record header: message length    */
     size_t in_left;             /*!< amount of data read so far       */
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len;          /*!< length of input buffer           */
+#endif
 #if defined(MBEDTLS_SSL_PROTO_DTLS)
     uint16_t in_epoch;          /*!< DTLS epoch for incoming records  */
     size_t next_record_offset;  /*!< offset of the next record in datagram
@@ -1254,6 +1257,9 @@
     int out_msgtype;            /*!< record header: message type      */
     size_t out_msglen;          /*!< record header: message length    */
     size_t out_left;            /*!< amount of data not yet written   */
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t out_buf_len;         /*!< length of output buffer          */
+#endif
 
     unsigned char cur_out_ctr[8]; /*!<  Outgoing record sequence  number. */
 
@@ -3733,7 +3739,14 @@
  *
  * \return         The (positive) number of bytes read if successful.
  * \return         \c 0 if the read end of the underlying transport was closed
- *                 - in this case you must stop using the context (see below).
+ *                 without sending a CloseNotify beforehand, which might happen
+ *                 because of various reasons (internal error of an underlying
+ *                 stack, non-conformant peer not sending a CloseNotify and
+ *                 such) - in this case you must stop using the context
+ *                 (see below).
+ * \return         #MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY if the underlying
+ *                 transport is still functional, but the peer has
+ *                 acknowledged to not send anything anymore.
  * \return         #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE
  *                 if the handshake is incomplete and waiting for data to
  *                 be available for reading from or writing to the underlying
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index 7122b2b..9ff61fd 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -238,7 +238,7 @@
    implicit sequence number. */
 #define MBEDTLS_SSL_HEADER_LEN 13
 
-#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
+#if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
 #define MBEDTLS_SSL_IN_BUFFER_LEN  \
     ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) )
 #else
@@ -247,7 +247,7 @@
       + ( MBEDTLS_SSL_CID_IN_LEN_MAX ) )
 #endif
 
-#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
+#if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
 #define MBEDTLS_SSL_OUT_BUFFER_LEN  \
     ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) )
 #else
@@ -256,6 +256,32 @@
       + ( MBEDTLS_SSL_CID_OUT_LEN_MAX ) )
 #endif
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+static inline uint32_t mbedtls_ssl_get_output_buflen( const mbedtls_ssl_context *ctx )
+{
+#if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
+    return (uint32_t) mbedtls_ssl_get_max_frag_len( ctx )
+               + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
+               + MBEDTLS_SSL_CID_OUT_LEN_MAX;
+#else
+    return (uint32_t) mbedtls_ssl_get_max_frag_len( ctx )
+               + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
+#endif
+}
+
+static inline uint32_t mbedtls_ssl_get_input_buflen( const mbedtls_ssl_context *ctx )
+{
+#if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
+    return (uint32_t) mbedtls_ssl_get_max_frag_len( ctx )
+               + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
+               + MBEDTLS_SSL_CID_IN_LEN_MAX;
+#else
+    return (uint32_t) mbedtls_ssl_get_max_frag_len( ctx )
+               + MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
+#endif
+}
+#endif
+
 #ifdef MBEDTLS_ZLIB_SUPPORT
 /* Compression buffer holds both IN and OUT buffers, so should be size of the larger */
 #define MBEDTLS_SSL_COMPRESS_BUFFER_LEN (                               \
diff --git a/library/ssl_msg.c b/library/ssl_msg.c
index 9c2d615..18fa555 100644
--- a/library/ssl_msg.c
+++ b/library/ssl_msg.c
@@ -179,11 +179,16 @@
 static size_t ssl_get_maximum_datagram_size( mbedtls_ssl_context const *ssl )
 {
     size_t mtu = mbedtls_ssl_get_current_mtu( ssl );
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t out_buf_len = ssl->out_buf_len;
+#else
+    size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
+#endif
 
-    if( mtu != 0 && mtu < MBEDTLS_SSL_OUT_BUFFER_LEN )
+    if( mtu != 0 && mtu < out_buf_len )
         return( mtu );
 
-    return( MBEDTLS_SSL_OUT_BUFFER_LEN );
+    return( out_buf_len );
 }
 
 static int ssl_get_remaining_space_in_datagram( mbedtls_ssl_context const *ssl )
@@ -1574,6 +1579,11 @@
     ptrdiff_t bytes_written = ssl->out_msg - ssl->out_buf;
     size_t len_pre = ssl->out_msglen;
     unsigned char *msg_pre = ssl->compress_buf;
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t out_buf_len = ssl->out_buf_len;
+#else
+    size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
+#endif
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> compress buf" ) );
 
@@ -1591,7 +1601,7 @@
     ssl->transform_out->ctx_deflate.next_in = msg_pre;
     ssl->transform_out->ctx_deflate.avail_in = len_pre;
     ssl->transform_out->ctx_deflate.next_out = msg_post;
-    ssl->transform_out->ctx_deflate.avail_out = MBEDTLS_SSL_OUT_BUFFER_LEN - bytes_written;
+    ssl->transform_out->ctx_deflate.avail_out = out_buf_len - bytes_written;
 
     ret = deflate( &ssl->transform_out->ctx_deflate, Z_SYNC_FLUSH );
     if( ret != Z_OK )
@@ -1600,7 +1610,7 @@
         return( MBEDTLS_ERR_SSL_COMPRESSION_FAILED );
     }
 
-    ssl->out_msglen = MBEDTLS_SSL_OUT_BUFFER_LEN -
+    ssl->out_msglen = out_buf_len -
                       ssl->transform_out->ctx_deflate.avail_out - bytes_written;
 
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "after compression: msglen = %d, ",
@@ -1621,6 +1631,11 @@
     ptrdiff_t header_bytes = ssl->in_msg - ssl->in_buf;
     size_t len_pre = ssl->in_msglen;
     unsigned char *msg_pre = ssl->compress_buf;
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len = ssl->in_buf_len;
+#else
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+#endif
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> decompress buf" ) );
 
@@ -1638,8 +1653,7 @@
     ssl->transform_in->ctx_inflate.next_in = msg_pre;
     ssl->transform_in->ctx_inflate.avail_in = len_pre;
     ssl->transform_in->ctx_inflate.next_out = msg_post;
-    ssl->transform_in->ctx_inflate.avail_out = MBEDTLS_SSL_IN_BUFFER_LEN -
-                                               header_bytes;
+    ssl->transform_in->ctx_inflate.avail_out = in_buf_len - header_bytes;
 
     ret = inflate( &ssl->transform_in->ctx_inflate, Z_SYNC_FLUSH );
     if( ret != Z_OK )
@@ -1648,7 +1662,7 @@
         return( MBEDTLS_ERR_SSL_COMPRESSION_FAILED );
     }
 
-    ssl->in_msglen = MBEDTLS_SSL_IN_BUFFER_LEN -
+    ssl->in_msglen = in_buf_len -
                      ssl->transform_in->ctx_inflate.avail_out - header_bytes;
 
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "after decompression: msglen = %d, ",
@@ -1682,6 +1696,11 @@
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
     size_t len;
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len = ssl->in_buf_len;
+#else
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+#endif
 
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "=> fetch input" ) );
 
@@ -1692,7 +1711,7 @@
         return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
     }
 
-    if( nb_want > MBEDTLS_SSL_IN_BUFFER_LEN - (size_t)( ssl->in_hdr - ssl->in_buf ) )
+    if( nb_want > in_buf_len - (size_t)( ssl->in_hdr - ssl->in_buf ) )
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "requesting more data than fits" ) );
         return( MBEDTLS_ERR_SSL_BAD_INPUT_DATA );
@@ -1778,7 +1797,7 @@
         }
         else
         {
-            len = MBEDTLS_SSL_IN_BUFFER_LEN - ( ssl->in_hdr - ssl->in_buf );
+            len = in_buf_len - ( ssl->in_hdr - ssl->in_buf );
 
             if( ssl->state != MBEDTLS_SSL_HANDSHAKE_OVER )
                 timeout = ssl->handshake->retransmit_timeout;
@@ -2032,7 +2051,7 @@
 /*
  * Swap transform_out and out_ctr with the alternative ones
  */
-static void ssl_swap_epochs( mbedtls_ssl_context *ssl )
+static int ssl_swap_epochs( mbedtls_ssl_context *ssl )
 {
     mbedtls_ssl_transform *tmp_transform;
     unsigned char tmp_out_ctr[8];
@@ -2040,7 +2059,7 @@
     if( ssl->transform_out == ssl->handshake->alt_transform_out )
     {
         MBEDTLS_SSL_DEBUG_MSG( 3, ( "skip swap epochs" ) );
-        return;
+        return( 0 );
     }
 
     MBEDTLS_SSL_DEBUG_MSG( 3, ( "swap epochs" ) );
@@ -2061,13 +2080,16 @@
 #if defined(MBEDTLS_SSL_HW_RECORD_ACCEL)
     if( mbedtls_ssl_hw_record_activate != NULL )
     {
-        if( ( ret = mbedtls_ssl_hw_record_activate( ssl, MBEDTLS_SSL_CHANNEL_OUTBOUND ) ) != 0 )
+        int ret = mbedtls_ssl_hw_record_activate( ssl, MBEDTLS_SSL_CHANNEL_OUTBOUND );
+        if( ret != 0 )
         {
             MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_hw_record_activate", ret );
             return( MBEDTLS_ERR_SSL_HW_ACCEL_FAILED );
         }
     }
 #endif
+
+    return( 0 );
 }
 
 /*
@@ -2104,7 +2126,9 @@
 
         ssl->handshake->cur_msg = ssl->handshake->flight;
         ssl->handshake->cur_msg_p = ssl->handshake->flight->p + 12;
-        ssl_swap_epochs( ssl );
+        ret = ssl_swap_epochs( ssl );
+        if( ret != 0 )
+            return( ret );
 
         ssl->handshake->retransmit_state = MBEDTLS_SSL_RETRANS_SENDING;
     }
@@ -2127,7 +2151,9 @@
         if( is_finished && ssl->handshake->cur_msg_p == ( cur->p + 12 ) )
         {
             MBEDTLS_SSL_DEBUG_MSG( 2, ( "swap epochs to send finished message" ) );
-            ssl_swap_epochs( ssl );
+            ret = ssl_swap_epochs( ssl );
+            if( ret != 0 )
+                return( ret );
         }
 
         ret = ssl_get_remaining_payload_in_datagram( ssl );
@@ -2164,7 +2190,11 @@
             if( ( max_frag_len < 12 ) || ( max_frag_len == 12 && hs_len != 0 ) )
             {
                 if( is_finished )
-                    ssl_swap_epochs( ssl );
+                {
+                    ret = ssl_swap_epochs( ssl );
+                    if( ret != 0 )
+                        return( ret );
+                }
 
                 if( ( ret = mbedtls_ssl_flush_output( ssl ) ) != 0 )
                     return( ret );
@@ -2523,7 +2553,11 @@
     {
         unsigned i;
         size_t protected_record_size;
-
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+        size_t out_buf_len = ssl->out_buf_len;
+#else
+        size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
+#endif
         /* Skip writing the record content type to after the encryption,
          * as it may change when using the CID extension. */
 
@@ -2539,8 +2573,7 @@
             mbedtls_record rec;
 
             rec.buf         = ssl->out_iv;
-            rec.buf_len     = MBEDTLS_SSL_OUT_BUFFER_LEN -
-                ( ssl->out_iv - ssl->out_buf );
+            rec.buf_len     = out_buf_len - ( ssl->out_iv - ssl->out_buf );
             rec.data_len    = ssl->out_msglen;
             rec.data_offset = ssl->out_msg - rec.buf;
 
@@ -4216,7 +4249,11 @@
     unsigned char * rec;
     size_t rec_len;
     unsigned rec_epoch;
-
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len = ssl->in_buf_len;
+#else
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+#endif
     if( ssl->conf->transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM )
         return( 0 );
 
@@ -4246,8 +4283,7 @@
     MBEDTLS_SSL_DEBUG_MSG( 2, ( "Found buffered record from current epoch - load" ) );
 
     /* Double-check that the record is not too large */
-    if( rec_len > MBEDTLS_SSL_IN_BUFFER_LEN -
-        (size_t)( ssl->in_hdr - ssl->in_buf ) )
+    if( rec_len > in_buf_len - (size_t)( ssl->in_hdr - ssl->in_buf ) )
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
         return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
diff --git a/library/ssl_srv.c b/library/ssl_srv.c
index 5ddf60e..469c67e 100644
--- a/library/ssl_srv.c
+++ b/library/ssl_srv.c
@@ -840,6 +840,7 @@
 
     for( cur = list; cur != NULL; cur = cur->next )
     {
+        flags = 0;
         MBEDTLS_SSL_DEBUG_CRT( 3, "candidate certificate chain, certificate",
                           cur->cert );
 
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 6ff768b..990fa5c 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -245,6 +245,29 @@
     return( 0 );
 }
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+static int resize_buffer( unsigned char **buffer, size_t len_new, size_t *len_old )
+{
+    unsigned char* resized_buffer = mbedtls_calloc( 1, len_new );
+    if( resized_buffer == NULL )
+        return -1;
+
+    /* We want to copy len_new bytes when downsizing the buffer, and
+     * len_old bytes when upsizing, so we choose the smaller of two sizes,
+     * to fit one buffer into another. Size checks, ensuring that no data is
+     * lost, are done outside of this function. */
+    memcpy( resized_buffer, *buffer,
+            ( len_new < *len_old ) ? len_new : *len_old );
+    mbedtls_platform_zeroize( *buffer, *len_old );
+    mbedtls_free( *buffer );
+
+    *buffer = resized_buffer;
+    *len_old = len_new;
+
+    return 0;
+}
+#endif /* MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH */
+
 /*
  * Key material generation
  */
@@ -804,7 +827,7 @@
  * - [in] minor_ver: SSL/TLS minor version
  * - [in] endpoint: client or server
  * - [in] ssl: optionally used for:
- *        - MBEDTLS_SSL_HW_RECORD_ACCEL: whole context
+ *        - MBEDTLS_SSL_HW_RECORD_ACCEL: whole context (non-const)
  *        - MBEDTLS_SSL_EXPORT_KEYS: ssl->conf->{f,p}_export_keys
  *        - MBEDTLS_DEBUG_C: ssl->conf->{f,p}_dbg
  */
@@ -826,7 +849,10 @@
                                    const unsigned char randbytes[64],
                                    int minor_ver,
                                    unsigned endpoint,
-                                   const mbedtls_ssl_context *ssl )
+#if !defined(MBEDTLS_SSL_HW_RECORD_ACCEL)
+                                   const
+#endif
+                                   mbedtls_ssl_context *ssl )
 {
     int ret = 0;
 #if defined(MBEDTLS_USE_PSA_CRYPTO)
@@ -3643,6 +3669,43 @@
     {
         ssl->handshake = mbedtls_calloc( 1, sizeof(mbedtls_ssl_handshake_params) );
     }
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    /* If the buffers are too small - reallocate */
+    {
+        int modified = 0;
+        if( ssl->in_buf_len < MBEDTLS_SSL_IN_BUFFER_LEN )
+        {
+            if( resize_buffer( &ssl->in_buf, MBEDTLS_SSL_IN_BUFFER_LEN,
+                               &ssl->in_buf_len ) != 0 )
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 1, ( "input buffer resizing failed - out of memory" ) );
+            }
+            else
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating in_buf to %d", MBEDTLS_SSL_IN_BUFFER_LEN ) );
+                modified = 1;
+            }
+        }
+        if( ssl->out_buf_len < MBEDTLS_SSL_OUT_BUFFER_LEN )
+        {
+            if( resize_buffer( &ssl->out_buf, MBEDTLS_SSL_OUT_BUFFER_LEN,
+                               &ssl->out_buf_len ) != 0 )
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 1, ( "output buffer resizing failed - out of memory" ) );
+            }
+            else
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating out_buf to %d", MBEDTLS_SSL_OUT_BUFFER_LEN ) );
+                modified = 1;
+            }
+        }
+        if( modified )
+        {
+            /* Update pointers here to avoid doing it twice. */
+            mbedtls_ssl_reset_in_out_pointers( ssl );
+        }
+    }
+#endif
 
     /* All pointers should exist and can be directly freed without issue */
     if( ssl->handshake == NULL ||
@@ -3729,6 +3792,8 @@
                        const mbedtls_ssl_config *conf )
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+    size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
 
     ssl->conf = conf;
 
@@ -3739,18 +3804,24 @@
     /* Set to NULL in case of an error condition */
     ssl->out_buf = NULL;
 
-    ssl->in_buf = mbedtls_calloc( 1, MBEDTLS_SSL_IN_BUFFER_LEN );
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    ssl->in_buf_len = in_buf_len;
+#endif
+    ssl->in_buf = mbedtls_calloc( 1, in_buf_len );
     if( ssl->in_buf == NULL )
     {
-        MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%d bytes) failed", MBEDTLS_SSL_IN_BUFFER_LEN) );
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%d bytes) failed", in_buf_len ) );
         ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
         goto error;
     }
 
-    ssl->out_buf = mbedtls_calloc( 1, MBEDTLS_SSL_OUT_BUFFER_LEN );
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    ssl->out_buf_len = out_buf_len;
+#endif
+    ssl->out_buf = mbedtls_calloc( 1, out_buf_len );
     if( ssl->out_buf == NULL )
     {
-        MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%d bytes) failed", MBEDTLS_SSL_OUT_BUFFER_LEN) );
+        MBEDTLS_SSL_DEBUG_MSG( 1, ( "alloc(%d bytes) failed", out_buf_len ) );
         ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
         goto error;
     }
@@ -3768,6 +3839,10 @@
 
     ssl->conf = NULL;
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    ssl->in_buf_len = 0;
+    ssl->out_buf_len = 0;
+#endif
     ssl->in_buf = NULL;
     ssl->out_buf = NULL;
 
@@ -3796,6 +3871,13 @@
 int mbedtls_ssl_session_reset_int( mbedtls_ssl_context *ssl, int partial )
 {
     int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED;
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len = ssl->in_buf_len;
+    size_t out_buf_len = ssl->out_buf_len;
+#else
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+    size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
+#endif
 
 #if !defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) ||     \
     !defined(MBEDTLS_SSL_SRV_C)
@@ -3851,14 +3933,14 @@
     ssl->session_in = NULL;
     ssl->session_out = NULL;
 
-    memset( ssl->out_buf, 0, MBEDTLS_SSL_OUT_BUFFER_LEN );
+    memset( ssl->out_buf, 0, out_buf_len );
 
 #if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) && defined(MBEDTLS_SSL_SRV_C)
     if( partial == 0 )
 #endif /* MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE && MBEDTLS_SSL_SRV_C */
     {
         ssl->in_left = 0;
-        memset( ssl->in_buf, 0, MBEDTLS_SSL_IN_BUFFER_LEN );
+        memset( ssl->in_buf, 0, in_buf_len );
     }
 
 #if defined(MBEDTLS_SSL_HW_RECORD_ACCEL)
@@ -5799,6 +5881,60 @@
 
     mbedtls_platform_zeroize( handshake,
                               sizeof( mbedtls_ssl_handshake_params ) );
+
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    /* If the buffers are too big - reallocate. Because of the way Mbed TLS
+     * processes datagrams and the fact that a datagram is allowed to have
+     * several records in it, it is possible that the I/O buffers are not
+     * empty at this stage */
+    {
+        int modified = 0;
+        uint32_t buf_len = mbedtls_ssl_get_input_buflen( ssl );
+        size_t written_in = 0;
+        size_t written_out = 0;
+        if( ssl->in_buf != NULL &&
+            ssl->in_buf_len > buf_len &&
+            ssl->in_left < buf_len )
+        {
+            written_in = ssl->in_msg - ssl->in_buf;
+            if( resize_buffer( &ssl->in_buf, buf_len, &ssl->in_buf_len ) != 0 )
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 1, ( "input buffer resizing failed - out of memory" ) );
+            }
+            else
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating in_buf to %d", buf_len ) );
+                modified = 1;
+            }
+        }
+
+        buf_len = mbedtls_ssl_get_output_buflen( ssl );
+        if( ssl->out_buf != NULL &&
+            ssl->out_buf_len > mbedtls_ssl_get_output_buflen( ssl ) &&
+            ssl->out_left < buf_len )
+        {
+            written_out = ssl->out_msg - ssl->out_buf;
+            if( resize_buffer( &ssl->out_buf, buf_len, &ssl->out_buf_len ) != 0 )
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 1, ( "output buffer resizing failed - out of memory" ) );
+            }
+            else
+            {
+                MBEDTLS_SSL_DEBUG_MSG( 2, ( "Reallocating out_buf to %d", buf_len ) );
+                modified = 1;
+            }
+        }
+        if( modified )
+        {
+            /* Update pointers here to avoid doing it twice. */
+            mbedtls_ssl_reset_in_out_pointers( ssl );
+            /* Fields below might not be properly updated with record
+             * splitting, so they are manually updated here. */
+            ssl->out_msg = ssl->out_buf + written_out;
+            ssl->in_msg = ssl->in_buf + written_in;
+        }
+    }
+#endif
 }
 
 void mbedtls_ssl_session_free( mbedtls_ssl_session *session )
@@ -6463,6 +6599,14 @@
  */
 void mbedtls_ssl_free( mbedtls_ssl_context *ssl )
 {
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    size_t in_buf_len = ssl->in_buf_len;
+    size_t out_buf_len = ssl->out_buf_len;
+#else
+    size_t in_buf_len = MBEDTLS_SSL_IN_BUFFER_LEN;
+    size_t out_buf_len = MBEDTLS_SSL_OUT_BUFFER_LEN;
+#endif
+
     if( ssl == NULL )
         return;
 
@@ -6470,14 +6614,16 @@
 
     if( ssl->out_buf != NULL )
     {
-        mbedtls_platform_zeroize( ssl->out_buf, MBEDTLS_SSL_OUT_BUFFER_LEN );
+        mbedtls_platform_zeroize( ssl->out_buf, out_buf_len );
         mbedtls_free( ssl->out_buf );
+        ssl->out_buf = NULL;
     }
 
     if( ssl->in_buf != NULL )
     {
-        mbedtls_platform_zeroize( ssl->in_buf, MBEDTLS_SSL_IN_BUFFER_LEN );
+        mbedtls_platform_zeroize( ssl->in_buf, in_buf_len );
         mbedtls_free( ssl->in_buf );
+        ssl->in_buf = NULL;
     }
 
 #if defined(MBEDTLS_ZLIB_SUPPORT)
diff --git a/library/version_features.c b/library/version_features.c
index 6694304..7408556 100644
--- a/library/version_features.c
+++ b/library/version_features.c
@@ -549,6 +549,9 @@
 #if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
     "MBEDTLS_SSL_TRUNCATED_HMAC",
 #endif /* MBEDTLS_SSL_TRUNCATED_HMAC */
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    "MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH",
+#endif /* MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH */
 #if defined(MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT)
     "MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT",
 #endif /* MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT */
diff --git a/programs/ssl/ssl_server2.c b/programs/ssl/ssl_server2.c
index 4f66059..f1b5c37 100644
--- a/programs/ssl/ssl_server2.c
+++ b/programs/ssl/ssl_server2.c
@@ -1838,7 +1838,10 @@
 
 #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
     mbedtls_memory_buffer_alloc_init( alloc_buf, sizeof(alloc_buf) );
-#endif
+#if defined(MBEDTLS_MEMORY_DEBUG)
+    size_t current_heap_memory, peak_heap_memory, heap_blocks;
+#endif  /* MBEDTLS_MEMORY_DEBUG */
+#endif  /* MBEDTLS_MEMORY_BUFFER_ALLOC_C */
 
     /*
      * Make sure memory references are valid in case we exit early.
@@ -3742,6 +3745,13 @@
     }
 #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
 
+#if defined(MBEDTLS_MEMORY_DEBUG)
+    mbedtls_memory_buffer_alloc_cur_get( &current_heap_memory, &heap_blocks );
+    mbedtls_memory_buffer_alloc_max_get( &peak_heap_memory, &heap_blocks );
+    mbedtls_printf( "Heap memory usage after handshake: %lu bytes. Peak memory usage was %lu\n",
+                    (unsigned long) current_heap_memory, (unsigned long) peak_heap_memory );
+#endif  /* MBEDTLS_MEMORY_DEBUG */
+
     if( opt.exchanges == 0 )
         goto close_notify;
 
diff --git a/programs/test/query_config.c b/programs/test/query_config.c
index fcdee61..528500c 100644
--- a/programs/test/query_config.c
+++ b/programs/test/query_config.c
@@ -1506,6 +1506,14 @@
     }
 #endif /* MBEDTLS_SSL_TRUNCATED_HMAC */
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    if( strcmp( "MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH", config ) == 0 )
+    {
+        MACRO_EXPANSION_TO_STR( MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH );
+        return( 0 );
+    }
+#endif /* MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH */
+
 #if defined(MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT)
     if( strcmp( "MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT", config ) == 0 )
     {
diff --git a/scripts/output_env.sh b/scripts/output_env.sh
index 22bef92..04edc38 100755
--- a/scripts/output_env.sh
+++ b/scripts/output_env.sh
@@ -23,7 +23,7 @@
     shift
     ARGS="$1"
     shift
-    VARIANT=$1
+    VARIANT="$1"
     shift
 
     if [ -n "$VARIANT" ]; then
@@ -45,6 +45,10 @@
         VERSION_STR=`echo "$VERSION_STR" | $FILTER`
     done
 
+    if [ -z "$VERSION_STR" ]; then
+        VERSION_STR="Version could not be determined."
+    fi
+
     echo " * ${BIN##*/}$VARIANT: ${BIN} : ${VERSION_STR} "
 }
 
@@ -61,6 +65,7 @@
 echo
 
 print_version "uname" "-a" ""
+
 echo
 echo
 echo "** Tool Versions:"
@@ -94,6 +99,24 @@
 print_version "gdb" "--version" "" "head -n 1"
 echo
 
+print_version "perl" "--version" "" "head -n 2" "grep ."
+echo
+
+print_version "python" "--version" "" "head -n 1"
+echo
+
+# Find the installed version of Pylint. Installed as a distro package this can
+# be pylint3 and as a PEP egg, pylint. In test scripts We prefer pylint over
+# pylint3
+if type pylint >/dev/null 2>/dev/null; then
+    print_version "pylint" "--version" "" "sed /^.*config/d" "grep pylint"
+elif type pylint3 >/dev/null 2>/dev/null; then
+    print_version "pylint3" "--version" "" "sed /^.*config/d" "grep pylint"
+else
+    echo " * pylint or pylint3: Not found."
+fi
+echo
+
 : ${OPENSSL:=openssl}
 print_version "$OPENSSL" "version" "default"
 echo
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index e909311..9b69aa2 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -1163,6 +1163,75 @@
     if_build_succeeded tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
 }
 
+component_test_variable_ssl_in_out_buffer_len () {
+    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    if_build_succeeded tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    if_build_succeeded tests/compat.sh
+}
+
+component_test_variable_ssl_in_out_buffer_len_CID () {
+    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID
+
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled"
+    if_build_succeeded tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_DTLS_CONNECTION_ID enabled"
+    if_build_succeeded tests/compat.sh
+}
+
+component_test_variable_ssl_in_out_buffer_len_record_splitting () {
+    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    scripts/config.py set MBEDTLS_SSL_CBC_RECORD_SPLITTING
+
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled"
+    if_build_succeeded tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH and MBEDTLS_SSL_CBC_RECORD_SPLITTING enabled"
+    if_build_succeeded tests/compat.sh
+}
+
+component_test_ssl_alloc_buffer_and_mfl () {
+    msg "build: default config with memory buffer allocator and MFL extension"
+    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_MEMORY_DEBUG
+    scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    CC=gcc cmake .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    make test
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    if_build_succeeded tests/ssl-opt.sh -f "Handshake memory usage"
+}
+
 component_test_when_no_ciphersuites_have_mac () {
     msg "build: when no ciphersuites have MAC"
     scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
@@ -1536,6 +1605,12 @@
     armc6_build_test "--target=aarch64-arm-none-eabi -march=armv8.2-a"
 }
 
+component_build_ssl_hw_record_accel() {
+    msg "build: default config with MBEDTLS_SSL_HW_RECORD_ACCEL enabled"
+    scripts/config.pl set MBEDTLS_SSL_HW_RECORD_ACCEL
+    make CFLAGS='-Werror -O1'
+}
+
 component_test_allow_sha1 () {
     msg "build: allow SHA1 in certificates by default"
     scripts/config.py set MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
@@ -1676,7 +1751,13 @@
 }
 
 support_check_python_files () {
-    type pylint3 >/dev/null 2>/dev/null
+    # Find the installed version of Pylint. Installed as a distro package this can
+    # be pylint3 and as a PEP egg, pylint.
+    if type pylint >/dev/null 2>/dev/null || type pylint3 >/dev/null 2>/dev/null; then
+        true;
+    else
+        false;
+    fi
 }
 component_check_python_files () {
     msg "Lint: Python scripts"
diff --git a/tests/scripts/check-python-files.sh b/tests/scripts/check-python-files.sh
index 9290418..6b864d2 100755
--- a/tests/scripts/check-python-files.sh
+++ b/tests/scripts/check-python-files.sh
@@ -9,4 +9,15 @@
 # Run 'pylint' on Python files for programming errors and helps enforcing
 # PEP8 coding standards.
 
-pylint3 -j 2 scripts/*.py tests/scripts/*.py
+# Find the installed version of Pylint. Installed as a distro package this can
+# be pylint3 and as a PEP egg, pylint. We prefer pylint over pylint3
+if type pylint >/dev/null 2>/dev/null; then
+    PYLINT=pylint
+elif type pylint3 >/dev/null 2>/dev/null; then
+    PYLINT=pylint3
+else
+    echo 'Pylint was not found.'
+    exit 1
+fi
+
+$PYLINT -j 2 scripts/*.py tests/scripts/*.py
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 8585b25..32f218d 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -223,7 +223,7 @@
 }
 
 requires_ciphersuite_enabled() {
-    if [ -z "$($P_CLI --help | grep $1)" ]; then
+    if [ -z "$($P_CLI --help 2>/dev/null | grep $1)" ]; then
         SKIP_NEXT="YES"
     fi
 }
@@ -525,6 +525,45 @@
     fi
 }
 
+# Get handshake memory usage from server or client output and put it into the variable specified by the first argument
+handshake_memory_get() {
+    OUTPUT_VARIABLE="$1"
+    OUTPUT_FILE="$2"
+
+    # Get memory usage from a pattern like "Heap memory usage after handshake: 23112 bytes. Peak memory usage was 33112"
+    MEM_USAGE=$(sed -n 's/.*Heap memory usage after handshake: //p' < "$OUTPUT_FILE" | grep -o "[0-9]*" | head -1)
+
+    # Check if memory usage was read
+    if [ -z "$MEM_USAGE" ]; then
+        echo "Error: Can not read the value of handshake memory usage"
+        return 1
+    else
+        eval "$OUTPUT_VARIABLE=$MEM_USAGE"
+        return 0
+    fi
+}
+
+# Get handshake memory usage from server or client output and check if this value
+# is not higher than the maximum given by the first argument
+handshake_memory_check() {
+    MAX_MEMORY="$1"
+    OUTPUT_FILE="$2"
+
+    # Get memory usage
+    if ! handshake_memory_get "MEMORY_USAGE" "$OUTPUT_FILE"; then
+        return 1
+    fi
+
+    # Check if memory usage is below max value
+    if [ "$MEMORY_USAGE" -gt "$MAX_MEMORY" ]; then
+        echo "\nFailed: Handshake memory usage was $MEMORY_USAGE bytes," \
+             "but should be below $MAX_MEMORY bytes"
+        return 1
+    else
+        return 0
+    fi
+}
+
 # wait for client to terminate and set CLI_EXIT
 # must be called right after starting the client
 wait_client_done() {
@@ -865,6 +904,58 @@
                 -C "error"
 }
 
+# Test that the server's memory usage after a handshake is reduced when a client specifies
+# a maximum fragment length.
+#  first argument ($1) is MFL for SSL client
+#  second argument ($2) is memory usage for SSL client with default MFL (16k)
+run_test_memory_after_hanshake_with_mfl()
+{
+    # The test passes if the difference is around 2*(16k-MFL)
+    local MEMORY_USAGE_LIMIT="$(( $2 - ( 2 * ( 16384 - $1 )) ))"
+
+    # Leave some margin for robustness
+    MEMORY_USAGE_LIMIT="$(( ( MEMORY_USAGE_LIMIT * 110 ) / 100 ))"
+
+    run_test    "Handshake memory usage (MFL $1)" \
+                "$P_SRV debug_level=3 auth_mode=required force_version=tls1_2" \
+                "$P_CLI debug_level=3 force_version=tls1_2 \
+                    crt_file=data_files/server5.crt key_file=data_files/server5.key \
+                    force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM max_frag_len=$1" \
+                0 \
+                -F "handshake_memory_check $MEMORY_USAGE_LIMIT"
+}
+
+
+# Test that the server's memory usage after a handshake is reduced when a client specifies
+# different values of Maximum Fragment Length: default (16k), 4k, 2k, 1k and 512 bytes
+run_tests_memory_after_hanshake()
+{
+    # all tests in this sequence requires the same configuration (see requires_config_enabled())
+    SKIP_THIS_TESTS="$SKIP_NEXT"
+
+    # first test with default MFU is to get reference memory usage
+    MEMORY_USAGE_MFL_16K=0
+    run_test    "Handshake memory usage initial (MFL 16384 - default)" \
+                "$P_SRV debug_level=3 auth_mode=required force_version=tls1_2" \
+                "$P_CLI debug_level=3 force_version=tls1_2 \
+                    crt_file=data_files/server5.crt key_file=data_files/server5.key \
+                    force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM" \
+                0 \
+                -F "handshake_memory_get MEMORY_USAGE_MFL_16K"
+
+    SKIP_NEXT="$SKIP_THIS_TESTS"
+    run_test_memory_after_hanshake_with_mfl 4096 "$MEMORY_USAGE_MFL_16K"
+
+    SKIP_NEXT="$SKIP_THIS_TESTS"
+    run_test_memory_after_hanshake_with_mfl 2048 "$MEMORY_USAGE_MFL_16K"
+
+    SKIP_NEXT="$SKIP_THIS_TESTS"
+    run_test_memory_after_hanshake_with_mfl 1024 "$MEMORY_USAGE_MFL_16K"
+
+    SKIP_NEXT="$SKIP_THIS_TESTS"
+    run_test_memory_after_hanshake_with_mfl 512 "$MEMORY_USAGE_MFL_16K"
+}
+
 cleanup() {
     rm -f $CLI_OUT $SRV_OUT $PXY_OUT $SESSION
     test -n "${SRV_PID:-}" && kill $SRV_PID >/dev/null 2>&1
@@ -8820,6 +8911,12 @@
             -c "exported keylen is " \
             -c "exported ivlen is "
 
+# Test heap memory usage after handshake
+requires_config_enabled MBEDTLS_MEMORY_DEBUG
+requires_config_enabled MBEDTLS_MEMORY_BUFFER_ALLOC_C
+requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+run_tests_memory_after_hanshake
+
 # Final report
 
 echo "------------------------------------------------------------------------"
diff --git a/tests/suites/test_suite_ssl.data b/tests/suites/test_suite_ssl.data
index e2a15cd..47ebd92 100644
--- a/tests/suites/test_suite_ssl.data
+++ b/tests/suites/test_suite_ssl.data
@@ -199,12 +199,10 @@
 Negative test moving servers ssl to state: NEW_SESSION_TICKET
 move_handshake_to_state:MBEDTLS_SSL_IS_SERVER:MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET:0
 
-# Note - the case below will have to updated, since the test sends no data due to a 1n-1 split against BEAST, that was not expected when preparing the fragment counting code.
 Handshake, SSL3
 depends_on:MBEDTLS_SSL_PROTO_SSL3:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED
 handshake_version:MBEDTLS_SSL_MINOR_VERSION_0:0
 
-# Note - the case below will have to updated, since the test sends no data due to a 1n-1 split against BEAST, that was not expected when preparing the fragment counting code.
 Handshake, tls1
 depends_on:MBEDTLS_SSL_PROTO_TLS1:MBEDTLS_CIPHER_MODE_CBC
 handshake_version:MBEDTLS_SSL_MINOR_VERSION_1:0
@@ -368,6 +366,54 @@
 DTLS renegotiation: legacy break handshake
 renegotiation:MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE
 
+DTLS serialization with MFL=512
+resize_buffers_serialize_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_512
+
+DTLS serialization with MFL=1024
+resize_buffers_serialize_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_1024
+
+DTLS serialization with MFL=2048
+resize_buffers_serialize_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_2048
+
+DTLS serialization with MFL=4096
+resize_buffers_serialize_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_4096
+
+DTLS no legacy renegotiation with MFL=512
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_512:MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION
+
+DTLS no legacy renegotiation with MFL=1024
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_1024:MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION
+
+DTLS no legacy renegotiation with MFL=2048
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_2048:MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION
+
+DTLS no legacy renegotiation with MFL=4096
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_4096:MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION
+
+DTLS legacy allow renegotiation with MFL=512
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_512:MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION
+
+DTLS legacy allow renegotiation with MFL=1024
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_1024:MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION
+
+DTLS legacy allow renegotiation with MFL=2048
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_2048:MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION
+
+DTLS legacy allow renegotiation with MFL=4096
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_4096:MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION
+
+DTLS legacy break handshake renegotiation with MFL=512
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_512:MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE
+
+DTLS legacy break handshake renegotiation with MFL=1024
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_1024:MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE
+
+DTLS legacy break handshake renegotiation with MFL=2048
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_2048:MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE
+
+DTLS legacy break handshake renegotiation with MFL=4096
+resize_buffers_renegotiate_mfl:MBEDTLS_SSL_MAX_FRAG_LEN_4096:MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE
+
 SSL DTLS replay: initial state, seqnum 0
 ssl_dtls_replay:"":"000000000000":0
 
diff --git a/tests/suites/test_suite_ssl.function b/tests/suites/test_suite_ssl.function
index 7aa2032..2a6e99b 100644
--- a/tests/suites/test_suite_ssl.function
+++ b/tests/suites/test_suite_ssl.function
@@ -13,7 +13,8 @@
     size_t counter;
 } log_pattern;
 
-/* This function can be passed to mbedtls to receive output logs from it. In
+/*
+ * This function can be passed to mbedtls to receive output logs from it. In
  * this case, it will count the instances of a log_pattern in the received
  * logged messages.
  */
@@ -55,6 +56,7 @@
     void *cli_log_obj;
     void (*srv_log_fun)(void *, int, const char *, int, const char *);
     void (*cli_log_fun)(void *, int, const char *, int, const char *);
+    int resize_buffers;
 } handshake_test_options;
 
 void init_handshake_options( handshake_test_options *opts )
@@ -77,6 +79,7 @@
   opts->srv_log_obj = NULL;
   opts->srv_log_fun = NULL;
   opts->cli_log_fun = NULL;
+  opts->resize_buffers = 1;
 }
 /*
  * Buffer structure for custom I/O callbacks.
@@ -552,6 +555,13 @@
     mbedtls_mock_socket* socket;
 } mbedtls_test_message_socket_context;
 
+void mbedtls_message_socket_init( mbedtls_test_message_socket_context *ctx )
+{
+    ctx->queue_input = NULL;
+    ctx->queue_output = NULL;
+    ctx->socket = NULL;
+}
+
 /*
  * Setup a given mesasge socket context including initialization of
  * input/output queues to a chosen capacity of messages. Also set the
@@ -1000,17 +1010,15 @@
 #endif /* MBEDTLS_X509_CRT_PARSE_C */
 
 /*
- * Write application data. Increase write counter and fragments counter if
- * necessary.
+ * Write application data. Increase write counter if necessary.
  */
 int mbedtls_ssl_write_fragment( mbedtls_ssl_context *ssl, unsigned char *buf,
                                 int buf_len, int *written,
-                                int *fragments, const int expected_fragments )
+                                const int expected_fragments )
 {
     int ret = mbedtls_ssl_write( ssl, buf + *written, buf_len - *written );
     if( ret > 0 )
     {
-        (*fragments)++;
         *written += ret;
     }
 
@@ -1046,15 +1054,16 @@
 }
 
 /*
- * Read application data and increase read counter if necessary.
+ * Read application data and increase read counter and fragments counter if necessary.
  */
 int mbedtls_ssl_read_fragment( mbedtls_ssl_context *ssl, unsigned char *buf,
                                int buf_len, int *read,
-                               const int expected_fragments )
+                               int *fragments, const int expected_fragments )
 {
     int ret = mbedtls_ssl_read( ssl, buf + *read, buf_len - *read );
     if( ret > 0 )
     {
+        ( *fragments )++;
         *read += ret;
     }
 
@@ -1543,7 +1552,6 @@
             {
                 ret = mbedtls_ssl_write_fragment( ssl_1, msg_buf_1,
                                                   msg_len_1, &written_1,
-                                                  &fragments_1,
                                                   expected_fragments_1 );
                 if( expected_fragments_1 == 0 )
                 {
@@ -1563,7 +1571,6 @@
             {
                 ret = mbedtls_ssl_write_fragment( ssl_2, msg_buf_2,
                                                   msg_len_2, &written_2,
-                                                  &fragments_2,
                                                   expected_fragments_2 );
                 if( expected_fragments_2 == 0 )
                 {
@@ -1583,7 +1590,8 @@
             {
                 ret = mbedtls_ssl_read_fragment( ssl_1, in_buf_1,
                                                  msg_len_2, &read_1,
-                                                 expected_fragments_1 );
+                                                 &fragments_2,
+                                                 expected_fragments_2 );
                 TEST_ASSERT( ret == 0 );
             }
 
@@ -1592,7 +1600,8 @@
             {
                 ret = mbedtls_ssl_read_fragment( ssl_2, in_buf_2,
                                                  msg_len_1, &read_2,
-                                                 expected_fragments_2 );
+                                                 &fragments_1,
+                                                 expected_fragments_1 );
                 TEST_ASSERT( ret == 0 );
             }
         }
@@ -1652,6 +1661,8 @@
 
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     /* Client side */
     if( options->dtls != 0 )
@@ -1767,6 +1778,17 @@
                                               &(server.socket),
                                               BUFFSIZE ) == 0 );
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    if( options->resize_buffers != 0 )
+    {
+        /* Ensure that the buffer sizes are appropriate before resizes */
+        TEST_ASSERT( client.ssl.out_buf_len == MBEDTLS_SSL_OUT_BUFFER_LEN );
+        TEST_ASSERT( client.ssl.in_buf_len == MBEDTLS_SSL_IN_BUFFER_LEN );
+        TEST_ASSERT( server.ssl.out_buf_len == MBEDTLS_SSL_OUT_BUFFER_LEN );
+        TEST_ASSERT( server.ssl.in_buf_len == MBEDTLS_SSL_IN_BUFFER_LEN );
+    }
+#endif
+
     TEST_ASSERT( mbedtls_move_handshake_to_state( &(client.ssl),
                                                   &(server.ssl),
                                                   MBEDTLS_SSL_HANDSHAKE_OVER )
@@ -1774,6 +1796,28 @@
     TEST_ASSERT( client.ssl.state == MBEDTLS_SSL_HANDSHAKE_OVER );
     TEST_ASSERT( server.ssl.state == MBEDTLS_SSL_HANDSHAKE_OVER );
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+    if( options->resize_buffers != 0 )
+    {
+        if( options->version != MBEDTLS_SSL_MINOR_VERSION_0 &&
+            options->version != MBEDTLS_SSL_MINOR_VERSION_1 )
+        {
+            /* A server, when using DTLS, might delay a buffer resize to happen
+             * after it receives a message, so we force it. */
+            TEST_ASSERT( exchange_data( &(client.ssl), &(server.ssl) ) == 0 );
+
+            TEST_ASSERT( client.ssl.out_buf_len ==
+                         mbedtls_ssl_get_output_buflen( &client.ssl ) );
+            TEST_ASSERT( client.ssl.in_buf_len ==
+                         mbedtls_ssl_get_input_buflen( &client.ssl ) );
+            TEST_ASSERT( server.ssl.out_buf_len ==
+                         mbedtls_ssl_get_output_buflen( &server.ssl ) );
+            TEST_ASSERT( server.ssl.in_buf_len ==
+                         mbedtls_ssl_get_input_buflen( &server.ssl ) );
+        }
+    }
+#endif
+
     if( options->cli_msg_len != 0 || options->srv_msg_len != 0 )
     {
         /* Start data exchanging test */
@@ -1814,9 +1858,27 @@
                                   mbedtls_timing_set_delay,
                                   mbedtls_timing_get_delay );
 #endif
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+        if( options->resize_buffers != 0 )
+        {
+            /* Ensure that the buffer sizes are appropriate before resizes */
+            TEST_ASSERT( server.ssl.out_buf_len == MBEDTLS_SSL_OUT_BUFFER_LEN );
+            TEST_ASSERT( server.ssl.in_buf_len == MBEDTLS_SSL_IN_BUFFER_LEN );
+        }
+#endif
         TEST_ASSERT( mbedtls_ssl_context_load( &( server.ssl ), context_buf,
                                                context_buf_len ) == 0 );
 
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+        /* Validate buffer sizes after context deserialization */
+        if( options->resize_buffers != 0 )
+        {
+            TEST_ASSERT( server.ssl.out_buf_len ==
+                         mbedtls_ssl_get_output_buflen( &server.ssl ) );
+            TEST_ASSERT( server.ssl.in_buf_len ==
+                         mbedtls_ssl_get_input_buflen( &server.ssl ) );
+        }
+#endif
         /* Retest writing/reading */
         if( options->cli_msg_len != 0 || options->srv_msg_len != 0 )
         {
@@ -1830,6 +1892,7 @@
         }
     }
 #endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
+
 #if defined(MBEDTLS_SSL_RENEGOTIATION)
     if( options->renegotiate )
     {
@@ -1859,6 +1922,14 @@
          * function will return waiting error on the socket. All rest of
          * renegotiation should happen during data exchanging */
         ret = mbedtls_ssl_renegotiate( &(client.ssl) );
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+        if( options->resize_buffers != 0 )
+        {
+            /* Ensure that the buffer sizes are appropriate before resizes */
+            TEST_ASSERT( client.ssl.out_buf_len == MBEDTLS_SSL_OUT_BUFFER_LEN );
+            TEST_ASSERT( client.ssl.in_buf_len == MBEDTLS_SSL_IN_BUFFER_LEN );
+        }
+#endif
         TEST_ASSERT( ret == 0 ||
                      ret == MBEDTLS_ERR_SSL_WANT_READ ||
                      ret == MBEDTLS_ERR_SSL_WANT_WRITE );
@@ -1872,6 +1943,20 @@
                      MBEDTLS_SSL_RENEGOTIATION_DONE );
         TEST_ASSERT( client.ssl.renego_status ==
                      MBEDTLS_SSL_RENEGOTIATION_DONE );
+#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
+        /* Validate buffer sizes after renegotiation */
+        if( options->resize_buffers != 0 )
+        {
+            TEST_ASSERT( client.ssl.out_buf_len ==
+                         mbedtls_ssl_get_output_buflen( &client.ssl ) );
+            TEST_ASSERT( client.ssl.in_buf_len ==
+                         mbedtls_ssl_get_input_buflen( &client.ssl ) );
+            TEST_ASSERT( server.ssl.out_buf_len ==
+                         mbedtls_ssl_get_output_buflen( &server.ssl ) );
+            TEST_ASSERT( server.ssl.in_buf_len ==
+                         mbedtls_ssl_get_input_buflen( &server.ssl ) );
+        }
+#endif /* MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH */
     }
 #endif /* MBEDTLS_SSL_RENEGOTIATION */
 
@@ -2380,7 +2465,7 @@
     TEST_ASSERT( mbedtls_test_message_queue_pop_info( NULL, 1 )
                  == MBEDTLS_TEST_ERROR_ARG_NULL );
 
-    mbedtls_test_message_queue_setup( &queue, 3 );
+    TEST_ASSERT( mbedtls_test_message_queue_setup( &queue, 3 ) == 0 );
     TEST_ASSERT( queue.capacity == 3 );
     TEST_ASSERT( queue.num == 0 );
 
@@ -2394,7 +2479,7 @@
 {
     mbedtls_test_message_queue queue;
 
-    mbedtls_test_message_queue_setup( &queue, 3 );
+    TEST_ASSERT( mbedtls_test_message_queue_setup( &queue, 3 ) == 0 );
 
     /* Sanity test - 3 pushes and 3 pops with sufficient space */
     TEST_ASSERT( mbedtls_test_message_queue_push_info( &queue, 1 ) == 1 );
@@ -2421,7 +2506,7 @@
 {
     mbedtls_test_message_queue queue;
 
-    mbedtls_test_message_queue_setup( &queue, 3 );
+    TEST_ASSERT( mbedtls_test_message_queue_setup( &queue, 3 ) == 0 );
 
     /* 4 pushes (last one with an error), 4 pops (last one with an error) */
     TEST_ASSERT( mbedtls_test_message_queue_push_info( &queue, 1 ) == 1 );
@@ -2447,7 +2532,7 @@
 {
     mbedtls_test_message_queue queue;
 
-    mbedtls_test_message_queue_setup( &queue, 3 );
+    TEST_ASSERT( mbedtls_test_message_queue_setup( &queue, 3 ) == 0 );
 
     /* Interleaved test - [2 pushes, 1 pop] twice, and then two pops
      * (to wrap around the buffer) */
@@ -2483,7 +2568,7 @@
     size_t message_len = 10;
     size_t buffer_len = 5;
 
-    mbedtls_test_message_queue_setup( &queue, 1 );
+    TEST_ASSERT( mbedtls_test_message_queue_setup( &queue, 1 ) == 0 );
 
     /* Popping without a sufficient buffer */
     TEST_ASSERT( mbedtls_test_message_queue_push_info( &queue, message_len )
@@ -2503,6 +2588,8 @@
     mbedtls_mock_socket client, server;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     /* Send with a NULL context */
     TEST_ASSERT( mbedtls_mock_tcp_send_msg( NULL, message, MSGLEN )
@@ -2548,6 +2635,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 1,
                                                &server,
@@ -2601,6 +2690,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 2,
                                                &server,
@@ -2657,6 +2748,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 2,
                                                &server,
@@ -2704,6 +2797,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 2,
                                                &server,
@@ -2761,6 +2856,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 1,
                                                &server,
@@ -2813,6 +2910,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 3,
                                                &server,
@@ -2871,6 +2970,8 @@
     unsigned i;
     mbedtls_test_message_queue server_queue, client_queue;
     mbedtls_test_message_socket_context server_context, client_context;
+    mbedtls_message_socket_init( &server_context );
+    mbedtls_message_socket_init( &client_context );
 
     TEST_ASSERT( mbedtls_message_socket_setup( &server_queue, &client_queue, 3,
                                                &server,
@@ -3643,14 +3744,13 @@
 
     options.version = version;
     options.dtls = dtls;
-    /* Note - the case below will have to updated, since the test sends no data
-     * due to a 1n-1 split against BEAST, that was not expected when preparing
-     * the fragment counting code. */
+    /* By default, SSLv3.0 and TLSv1.0 use 1/n-1 splitting when sending data, so
+     * the number of fragments will be twice as big. */
     if( version == MBEDTLS_SSL_MINOR_VERSION_0 ||
         version == MBEDTLS_SSL_MINOR_VERSION_1 )
     {
-        options.cli_msg_len = 0;
-        options.srv_msg_len = 0;
+        options.expected_cli_fragments = 2;
+        options.expected_srv_fragments = 2;
     }
     perform_handshake( &options );
 
@@ -3746,7 +3846,7 @@
 }
 /* END_CASE */
 
-/* BEGIN_CASE depends_on:MBEDTLS_X509_CRT_PARSE_C:!MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PKCS1_V15:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED:MBEDTLS_DEBUG_C:MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
+/* BEGIN_CASE depends_on:MBEDTLS_X509_CRT_PARSE_C:!MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PKCS1_V15:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED:MBEDTLS_DEBUG_C:MBEDTLS_SSL_MAX_FRAGMENT_LENGTH:MBEDTLS_CIPHER_MODE_CBC */
 void handshake_fragmentation( int mfl, int expected_srv_hs_fragmentation, int expected_cli_hs_fragmentation)
 {
     handshake_test_options options;
@@ -3759,6 +3859,8 @@
     init_handshake_options( &options );
     options.dtls = 1;
     options.mfl = mfl;
+    /* Set cipher to one using CBC so that record splitting can be tested */
+    options.cipher = "TLS-DHE-RSA-WITH-AES-256-CBC-SHA256";
     options.srv_auth_mode = MBEDTLS_SSL_VERIFY_REQUIRED;
     options.srv_log_obj = &srv_pattern;
     options.cli_log_obj = &cli_pattern;
@@ -3795,3 +3897,43 @@
     goto exit;
 }
 /* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_X509_CRT_PARSE_C:!MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PKCS1_V15:MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH:MBEDTLS_SSL_PROTO_TLS1_2:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED */
+void resize_buffers( int mfl, int renegotiation, int legacy_renegotiation,
+                     int serialize, int dtls )
+{
+    handshake_test_options options;
+    init_handshake_options( &options );
+
+    options.mfl = mfl;
+    options.renegotiate = renegotiation;
+    options.legacy_renegotiation = legacy_renegotiation;
+    options.serialize = serialize;
+    options.dtls = dtls;
+    options.resize_buffers = 1;
+
+    perform_handshake( &options );
+    /* The goto below is used to avoid an "unused label" warning.*/
+    goto exit;
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_X509_CRT_PARSE_C:!MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PKCS1_V15:MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH:MBEDTLS_SSL_CONTEXT_SERIALIZATION:MBEDTLS_SSL_PROTO_TLS1_2:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED:MBEDTLS_SSL_PROTO_DTLS */
+void resize_buffers_serialize_mfl( int mfl )
+{
+    test_resize_buffers( mfl, 0, MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION, 1, 1 );
+
+    /* The goto below is used to avoid an "unused label" warning.*/
+    goto exit;
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_X509_CRT_PARSE_C:!MBEDTLS_USE_PSA_CRYPTO:MBEDTLS_PKCS1_V15:MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH:MBEDTLS_SSL_RENEGOTIATION:MBEDTLS_SSL_PROTO_TLS1_2:MBEDTLS_RSA_C:MBEDTLS_ECP_DP_SECP384R1_ENABLED */
+void resize_buffers_renegotiate_mfl( int mfl, int legacy_renegotiation )
+{
+    test_resize_buffers( mfl, 1, legacy_renegotiation, 0, 1 );
+
+    /* The goto below is used to avoid an "unused label" warning.*/
+    goto exit;
+}
+/* END_CASE */