blob: e962ddce8c84c8f32e462c7efeb981942f81386c [file] [log] [blame]
/*
* SSL client with certificate authentication
*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ssl_test_lib.h"
#if defined(MBEDTLS_SSL_TEST_IMPOSSIBLE)
int main( void )
{
mbedtls_printf( MBEDTLS_SSL_TEST_IMPOSSIBLE );
mbedtls_exit( 0 );
}
#elif !defined(MBEDTLS_SSL_CLI_C)
int main( void )
{
mbedtls_printf( "MBEDTLS_SSL_CLI_C not defined.\n" );
mbedtls_exit( 0 );
}
#else /* !MBEDTLS_SSL_TEST_IMPOSSIBLE && MBEDTLS_SSL_CLI_C */
/* Size of memory to be allocated for the heap, when using the library's memory
* management and MBEDTLS_MEMORY_BUFFER_ALLOC_C is enabled. */
#define MEMORY_HEAP_SIZE 120000
#define MAX_REQUEST_SIZE 20000
#define MAX_REQUEST_SIZE_STR "20000"
#define DFL_SERVER_NAME "localhost"
#define DFL_SERVER_ADDR NULL
#define DFL_SERVER_PORT "4433"
#define DFL_REQUEST_PAGE "/"
#define DFL_REQUEST_SIZE -1
#define DFL_DEBUG_LEVEL 0
#define DFL_CONTEXT_CRT_CB 0
#define DFL_NBIO 0
#define DFL_EVENT 0
#define DFL_READ_TIMEOUT 0
#define DFL_MAX_RESEND 0
#define DFL_CA_FILE ""
#define DFL_CA_PATH ""
#define DFL_CRT_FILE ""
#define DFL_KEY_FILE ""
#define DFL_KEY_OPAQUE 0
#define DFL_KEY_PWD ""
#define DFL_PSK ""
#define DFL_PSK_OPAQUE 0
#define DFL_PSK_IDENTITY "Client_identity"
#define DFL_ECJPAKE_PW NULL
#define DFL_EC_MAX_OPS -1
#define DFL_FORCE_CIPHER 0
#define DFL_RENEGOTIATION MBEDTLS_SSL_RENEGOTIATION_DISABLED
#define DFL_ALLOW_LEGACY -2
#define DFL_RENEGOTIATE 0
#define DFL_EXCHANGES 1
#define DFL_MIN_VERSION -1
#define DFL_MAX_VERSION -1
#define DFL_SHA1 -1
#define DFL_AUTH_MODE -1
#define DFL_MFL_CODE MBEDTLS_SSL_MAX_FRAG_LEN_NONE
#define DFL_TRUNC_HMAC -1
#define DFL_RECSPLIT -1
#define DFL_DHMLEN -1
#define DFL_RECONNECT 0
#define DFL_RECO_DELAY 0
#define DFL_RECO_MODE 1
#define DFL_CID_ENABLED 0
#define DFL_CID_VALUE ""
#define DFL_CID_ENABLED_RENEGO -1
#define DFL_CID_VALUE_RENEGO NULL
#define DFL_RECONNECT_HARD 0
#define DFL_TICKETS MBEDTLS_SSL_SESSION_TICKETS_ENABLED
#define DFL_ALPN_STRING NULL
#define DFL_CURVES NULL
#define DFL_TRANSPORT MBEDTLS_SSL_TRANSPORT_STREAM
#define DFL_HS_TO_MIN 0
#define DFL_HS_TO_MAX 0
#define DFL_DTLS_MTU -1
#define DFL_DGRAM_PACKING 1
#define DFL_FALLBACK -1
#define DFL_EXTENDED_MS -1
#define DFL_ETM -1
#define DFL_SERIALIZE 0
#define DFL_CONTEXT_FILE ""
#define DFL_EXTENDED_MS_ENFORCE -1
#define DFL_CA_CALLBACK 0
#define DFL_EAP_TLS 0
#define DFL_REPRODUCIBLE 0
#define DFL_NSS_KEYLOG 0
#define DFL_NSS_KEYLOG_FILE NULL
#define DFL_SKIP_CLOSE_NOTIFY 0
#define DFL_QUERY_CONFIG_MODE 0
#define DFL_USE_SRTP 0
#define DFL_SRTP_FORCE_PROFILE 0
#define DFL_SRTP_MKI ""
#define GET_REQUEST "GET %s HTTP/1.0\r\nExtra-header: "
#define GET_REQUEST_END "\r\n\r\n"
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#define USAGE_CONTEXT_CRT_CB \
" context_crt_cb=%%d This determines whether the CRT verification callback is bound\n" \
" to the SSL configuration of the SSL context.\n" \
" Possible values:\n"\
" - 0 (default): Use CRT callback bound to configuration\n" \
" - 1: Use CRT callback bound to SSL context\n"
#else
#define USAGE_CONTEXT_CRT_CB ""
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#if defined(MBEDTLS_FS_IO)
#define USAGE_IO \
" ca_file=%%s The single file containing the top-level CA(s) you fully trust\n" \
" default: \"\" (pre-loaded)\n" \
" use \"none\" to skip loading any top-level CAs.\n" \
" ca_path=%%s The path containing the top-level CA(s) you fully trust\n" \
" default: \"\" (pre-loaded) (overrides ca_file)\n" \
" use \"none\" to skip loading any top-level CAs.\n" \
" crt_file=%%s Your own cert and chain (in bottom to top order, top may be omitted)\n" \
" default: \"\" (pre-loaded)\n" \
" key_file=%%s default: \"\" (pre-loaded)\n"\
" key_pwd=%%s Password for key specified by key_file argument\n"\
" default: none\n"
#else
#define USAGE_IO \
" No file operations available (MBEDTLS_FS_IO not defined)\n"
#endif /* MBEDTLS_FS_IO */
#else /* MBEDTLS_X509_CRT_PARSE_C */
#define USAGE_IO ""
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_X509_CRT_PARSE_C)
#define USAGE_KEY_OPAQUE \
" key_opaque=%%d Handle your private key as if it were opaque\n" \
" default: 0 (disabled)\n"
#else
#define USAGE_KEY_OPAQUE ""
#endif
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
#define USAGE_CID \
" cid=%%d Disable (0) or enable (1) the use of the DTLS Connection ID extension.\n" \
" default: 0 (disabled)\n" \
" cid_renego=%%d Disable (0) or enable (1) the use of the DTLS Connection ID extension during renegotiation.\n" \
" default: same as 'cid' parameter\n" \
" cid_val=%%s The CID to use for incoming messages (in hex, without 0x).\n" \
" default: \"\"\n" \
" cid_val_renego=%%s The CID to use for incoming messages (in hex, without 0x) after renegotiation.\n" \
" default: same as 'cid_val' parameter\n"
#else /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#define USAGE_CID ""
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
#define USAGE_PSK_RAW \
" psk=%%s default: \"\" (disabled)\n" \
" The PSK values are in hex, without 0x.\n" \
" psk_identity=%%s default: \"Client_identity\"\n"
#if defined(MBEDTLS_USE_PSA_CRYPTO)
#define USAGE_PSK_SLOT \
" psk_opaque=%%d default: 0 (don't use opaque static PSK)\n" \
" Enable this to store the PSK configured through command line\n" \
" parameter `psk` in a PSA-based key slot.\n" \
" Note: Currently only supported in conjunction with\n" \
" the use of min_version to force TLS 1.2 and force_ciphersuite \n" \
" to force a particular PSK-only ciphersuite.\n" \
" Note: This is to test integration of PSA-based opaque PSKs with\n" \
" Mbed TLS only. Production systems are likely to configure Mbed TLS\n" \
" with prepopulated key slots instead of importing raw key material.\n"
#else
#define USAGE_PSK_SLOT ""
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#define USAGE_PSK USAGE_PSK_RAW USAGE_PSK_SLOT
#else
#define USAGE_PSK ""
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
#define USAGE_CA_CALLBACK \
" ca_callback=%%d default: 0 (disabled)\n" \
" Enable this to use the trusted certificate callback function\n"
#else
#define USAGE_CA_CALLBACK ""
#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
#define USAGE_TICKETS \
" tickets=%%d default: 1 (enabled)\n"
#else
#define USAGE_TICKETS ""
#endif /* MBEDTLS_SSL_SESSION_TICKETS */
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
#define USAGE_EAP_TLS \
" eap_tls=%%d default: 0 (disabled)\n"
#define USAGE_NSS_KEYLOG \
" nss_keylog=%%d default: 0 (disabled)\n" \
" This cannot be used with eap_tls=1\n"
#define USAGE_NSS_KEYLOG_FILE \
" nss_keylog_file=%%s\n"
#if defined(MBEDTLS_SSL_DTLS_SRTP)
#define USAGE_SRTP \
" use_srtp=%%d default: 0 (disabled)\n" \
" This cannot be used with eap_tls=1 or "\
" nss_keylog=1\n" \
" srtp_force_profile=%%d default: 0 (all enabled)\n" \
" available profiles:\n" \
" 1 - SRTP_AES128_CM_HMAC_SHA1_80\n" \
" 2 - SRTP_AES128_CM_HMAC_SHA1_32\n" \
" 3 - SRTP_NULL_HMAC_SHA1_80\n" \
" 4 - SRTP_NULL_HMAC_SHA1_32\n" \
" mki=%%s default: \"\" (in hex, without 0x)\n"
#else /* MBEDTLS_SSL_DTLS_SRTP */
#define USAGE_SRTP ""
#endif
#else /* MBEDTLS_SSL_EXPORT_KEYS */
#define USAGE_EAP_TLS ""
#define USAGE_NSS_KEYLOG ""
#define USAGE_NSS_KEYLOG_FILE ""
#define USAGE_SRTP ""
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
#define USAGE_TRUNC_HMAC \
" trunc_hmac=%%d default: library default\n"
#else
#define USAGE_TRUNC_HMAC ""
#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
#define USAGE_MAX_FRAG_LEN \
" max_frag_len=%%d default: 16384 (tls default)\n" \
" options: 512, 1024, 2048, 4096\n"
#else
#define USAGE_MAX_FRAG_LEN ""
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
#define USAGE_RECSPLIT \
" recsplit=0/1 default: (library default: on)\n"
#else
#define USAGE_RECSPLIT
#endif
#if defined(MBEDTLS_DHM_C)
#define USAGE_DHMLEN \
" dhmlen=%%d default: (library default: 1024 bits)\n"
#else
#define USAGE_DHMLEN
#endif
#if defined(MBEDTLS_SSL_ALPN)
#define USAGE_ALPN \
" alpn=%%s default: \"\" (disabled)\n" \
" example: spdy/1,http/1.1\n"
#else
#define USAGE_ALPN ""
#endif /* MBEDTLS_SSL_ALPN */
#if defined(MBEDTLS_ECP_C)
#define USAGE_CURVES \
" curves=a,b,c,d default: \"default\" (library default)\n" \
" example: \"secp521r1,brainpoolP512r1\"\n" \
" - use \"none\" for empty list\n" \
" - see mbedtls_ecp_curve_list()\n" \
" for acceptable curve names\n"
#else
#define USAGE_CURVES ""
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
#define USAGE_DTLS \
" dtls=%%d default: 0 (TLS)\n" \
" hs_timeout=%%d-%%d default: (library default: 1000-60000)\n" \
" range of DTLS handshake timeouts in millisecs\n" \
" mtu=%%d default: (library default: unlimited)\n" \
" dgram_packing=%%d default: 1 (allowed)\n" \
" allow or forbid packing of multiple\n" \
" records within a single datgram.\n"
#else
#define USAGE_DTLS ""
#endif
#if defined(MBEDTLS_SSL_FALLBACK_SCSV)
#define USAGE_FALLBACK \
" fallback=0/1 default: (library default: off)\n"
#else
#define USAGE_FALLBACK ""
#endif
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
#define USAGE_EMS \
" extended_ms=0/1 default: (library default: on)\n"
#else
#define USAGE_EMS ""
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
#define USAGE_ETM \
" etm=0/1 default: (library default: on)\n"
#else
#define USAGE_ETM ""
#endif
#define USAGE_REPRODUCIBLE \
" reproducible=0/1 default: 0 (disabled)\n"
#if defined(MBEDTLS_SSL_RENEGOTIATION)
#define USAGE_RENEGO \
" renegotiation=%%d default: 0 (disabled)\n" \
" renegotiate=%%d default: 0 (disabled)\n"
#else
#define USAGE_RENEGO ""
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
#define USAGE_ECJPAKE \
" ecjpake_pw=%%s default: none (disabled)\n"
#else
#define USAGE_ECJPAKE ""
#endif
#if defined(MBEDTLS_ECP_RESTARTABLE)
#define USAGE_ECRESTART \
" ec_max_ops=%%s default: library default (restart disabled)\n"
#else
#define USAGE_ECRESTART ""
#endif
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
#define USAGE_SERIALIZATION \
" serialize=%%d default: 0 (do not serialize/deserialize)\n" \
" options: 1 (serialize)\n" \
" 2 (serialize with re-initialization)\n" \
" context_file=%%s The file path to write a serialized connection\n"\
" in the form of base64 code (serialize option\n" \
" must be set)\n" \
" default: \"\" (do nothing)\n" \
" option: a file path\n"
#else
#define USAGE_SERIALIZATION ""
#endif
/* USAGE is arbitrarily split to stay under the portable string literal
* length limit: 4095 bytes in C99. */
#define USAGE1 \
"\n usage: ssl_client2 param=<>...\n" \
"\n acceptable parameters:\n" \
" server_name=%%s default: localhost\n" \
" server_addr=%%s default: given by name\n" \
" server_port=%%d default: 4433\n" \
" request_page=%%s default: \".\"\n" \
" request_size=%%d default: about 34 (basic request)\n" \
" (minimum: 0, max: " MAX_REQUEST_SIZE_STR ")\n" \
" If 0, in the first exchange only an empty\n" \
" application data message is sent followed by\n" \
" a second non-empty message before attempting\n" \
" to read a response from the server\n" \
" debug_level=%%d default: 0 (disabled)\n" \
" nbio=%%d default: 0 (blocking I/O)\n" \
" options: 1 (non-blocking), 2 (added delays)\n" \
" event=%%d default: 0 (loop)\n" \
" options: 1 (level-triggered, implies nbio=1),\n" \
" read_timeout=%%d default: 0 ms (no timeout)\n" \
" max_resend=%%d default: 0 (no resend on timeout)\n" \
" skip_close_notify=%%d default: 0 (send close_notify)\n" \
"\n" \
USAGE_DTLS \
USAGE_CID \
USAGE_SRTP \
"\n"
#define USAGE2 \
" auth_mode=%%s default: (library default: none)\n" \
" options: none, optional, required\n" \
USAGE_IO \
USAGE_KEY_OPAQUE \
USAGE_CA_CALLBACK \
"\n" \
USAGE_PSK \
USAGE_ECJPAKE \
USAGE_ECRESTART \
"\n"
#define USAGE3 \
" allow_legacy=%%d default: (library default: no)\n" \
USAGE_RENEGO \
" exchanges=%%d default: 1\n" \
" reconnect=%%d number of reconnections using session resumption\n" \
" default: 0 (disabled)\n" \
" reco_delay=%%d default: 0 seconds\n" \
" reco_mode=%%d 0: copy session, 1: serialize session\n" \
" default: 1\n" \
" reconnect_hard=%%d default: 0 (disabled)\n" \
USAGE_TICKETS \
USAGE_EAP_TLS \
USAGE_MAX_FRAG_LEN \
USAGE_TRUNC_HMAC \
USAGE_CONTEXT_CRT_CB \
USAGE_ALPN \
USAGE_FALLBACK \
USAGE_EMS \
USAGE_ETM \
USAGE_REPRODUCIBLE \
USAGE_CURVES \
USAGE_RECSPLIT \
USAGE_DHMLEN \
"\n"
#define USAGE4 \
" allow_sha1=%%d default: 0\n" \
" min_version=%%s default: (library default: tls1)\n" \
" max_version=%%s default: (library default: tls1_2)\n" \
" force_version=%%s default: \"\" (none)\n" \
" options: tls1, tls1_1, tls1_2, dtls1, dtls1_2\n" \
"\n" \
" force_ciphersuite=<name> default: all enabled\n"\
" query_config=<name> return 0 if the specified\n" \
" configuration macro is defined and 1\n" \
" otherwise. The expansion of the macro\n" \
" is printed if it is defined\n" \
USAGE_SERIALIZATION \
" acceptable ciphersuite names:\n"
#define ALPN_LIST_SIZE 10
#define CURVE_LIST_SIZE 20
/*
* global options
*/
struct options
{
const char *server_name; /* hostname of the server (client only) */
const char *server_addr; /* address of the server (client only) */
const char *server_port; /* port on which the ssl service runs */
int debug_level; /* level of debugging */
int nbio; /* should I/O be blocking? */
int event; /* loop or event-driven IO? level or edge triggered? */
uint32_t read_timeout; /* timeout on mbedtls_ssl_read() in milliseconds */
int max_resend; /* DTLS times to resend on read timeout */
const char *request_page; /* page on server to request */
int request_size; /* pad request with header to requested size */
const char *ca_file; /* the file with the CA certificate(s) */
const char *ca_path; /* the path with the CA certificate(s) reside */
const char *crt_file; /* the file with the client certificate */
const char *key_file; /* the file with the client key */
int key_opaque; /* handle private key as if it were opaque */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
int psk_opaque;
#endif
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
int ca_callback; /* Use callback for trusted certificate list */
#endif
const char *key_pwd; /* the password for the client key */
const char *psk; /* the pre-shared key */
const char *psk_identity; /* the pre-shared key identity */
const char *ecjpake_pw; /* the EC J-PAKE password */
int ec_max_ops; /* EC consecutive operations limit */
int force_ciphersuite[2]; /* protocol/ciphersuite to use, or all */
int renegotiation; /* enable / disable renegotiation */
int allow_legacy; /* allow legacy renegotiation */
int renegotiate; /* attempt renegotiation? */
int renego_delay; /* delay before enforcing renegotiation */
int exchanges; /* number of data exchanges */
int min_version; /* minimum protocol version accepted */
int max_version; /* maximum protocol version accepted */
int allow_sha1; /* flag for SHA-1 support */
int auth_mode; /* verify mode for connection */
unsigned char mfl_code; /* code for maximum fragment length */
int trunc_hmac; /* negotiate truncated hmac or not */
int recsplit; /* enable record splitting? */
int dhmlen; /* minimum DHM params len in bits */
int reconnect; /* attempt to resume session */
int reco_delay; /* delay in seconds before resuming session */
int reco_mode; /* how to keep the session around */
int reconnect_hard; /* unexpectedly reconnect from the same port */
int tickets; /* enable / disable session tickets */
const char *curves; /* list of supported elliptic curves */
const char *alpn_string; /* ALPN supported protocols */
int transport; /* TLS or DTLS? */
uint32_t hs_to_min; /* Initial value of DTLS handshake timer */
uint32_t hs_to_max; /* Max value of DTLS handshake timer */
int dtls_mtu; /* UDP Maximum tranport unit for DTLS */
int fallback; /* is this a fallback connection? */
int dgram_packing; /* allow/forbid datagram packing */
int extended_ms; /* negotiate extended master secret? */
int etm; /* negotiate encrypt then mac? */
int context_crt_cb; /* use context-specific CRT verify callback */
int eap_tls; /* derive EAP-TLS keying material? */
int nss_keylog; /* export NSS key log material */
const char *nss_keylog_file; /* NSS key log file */
int cid_enabled; /* whether to use the CID extension or not */
int cid_enabled_renego; /* whether to use the CID extension or not
* during renegotiation */
const char *cid_val; /* the CID to use for incoming messages */
int serialize; /* serialize/deserialize connection */
const char *context_file; /* the file to write a serialized connection
* in the form of base64 code (serialize
* option must be set) */
const char *cid_val_renego; /* the CID to use for incoming messages
* after renegotiation */
int reproducible; /* make communication reproducible */
int skip_close_notify; /* skip sending the close_notify alert */
int query_config_mode; /* whether to read config */
int use_srtp; /* Support SRTP */
int force_srtp_profile; /* SRTP protection profile to use or all */
const char *mki; /* The dtls mki value to use */
} opt;
#include "ssl_test_common_source.c"
#if defined(MBEDTLS_X509_CRT_PARSE_C)
static unsigned char peer_crt_info[1024];
/*
* Enabled if debug_level > 1 in code below
*/
static int my_verify( void *data, mbedtls_x509_crt *crt,
int depth, uint32_t *flags )
{
char buf[1024];
((void) data);
mbedtls_x509_crt_info( buf, sizeof( buf ) - 1, "", crt );
if( depth == 0 )
memcpy( peer_crt_info, buf, sizeof( buf ) );
if( opt.debug_level == 0 )
return( 0 );
mbedtls_printf( "\nVerify requested for (Depth %d):\n", depth );
mbedtls_printf( "%s", buf );
if ( ( *flags ) == 0 )
mbedtls_printf( " This certificate has no flags\n" );
else
{
mbedtls_x509_crt_verify_info( buf, sizeof( buf ), " ! ", *flags );
mbedtls_printf( "%s\n", buf );
}
return( 0 );
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
int report_cid_usage( mbedtls_ssl_context *ssl,
const char *additional_description )
{
int ret;
unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ];
size_t peer_cid_len;
int cid_negotiated;
if( opt.transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( 0 );
/* Check if the use of a CID has been negotiated,
* but don't ask for the CID value and length.
*
* Note: Here and below, we're demonstrating the various ways
* in which mbedtls_ssl_get_peer_cid() can be called,
* depending on whether or not the length/value of the
* peer's CID is needed.
*
* An actual application, however, should use
* just one call to mbedtls_ssl_get_peer_cid(). */
ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated,
NULL, NULL );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n",
(unsigned int) -ret );
return( ret );
}
if( cid_negotiated == MBEDTLS_SSL_CID_DISABLED )
{
if( opt.cid_enabled == MBEDTLS_SSL_CID_ENABLED )
{
mbedtls_printf( "(%s) Use of Connection ID was rejected by the server.\n",
additional_description );
}
}
else
{
size_t idx=0;
mbedtls_printf( "(%s) Use of Connection ID has been negotiated.\n",
additional_description );
/* Ask for just the length of the peer's CID. */
ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated,
NULL, &peer_cid_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n",
(unsigned int) -ret );
return( ret );
}
/* Ask for just length + value of the peer's CID. */
ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated,
peer_cid, &peer_cid_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n",
(unsigned int) -ret );
return( ret );
}
mbedtls_printf( "(%s) Peer CID (length %u Bytes): ",
additional_description,
(unsigned) peer_cid_len );
while( idx < peer_cid_len )
{
mbedtls_printf( "%02x ", peer_cid[ idx ] );
idx++;
}
mbedtls_printf( "\n" );
}
return( 0 );
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
int main( int argc, char *argv[] )
{
int ret = 0, len, tail_len, i, written, frags, retry_left;
int query_config_ret = 0;
mbedtls_net_context server_fd;
io_ctx_t io_ctx;
unsigned char buf[MAX_REQUEST_SIZE + 1];
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
unsigned char psk[MBEDTLS_PSK_MAX_LEN];
size_t psk_len = 0;
#endif
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
unsigned char cid[MBEDTLS_SSL_CID_IN_LEN_MAX];
unsigned char cid_renego[MBEDTLS_SSL_CID_IN_LEN_MAX];
size_t cid_len = 0;
size_t cid_renego_len = 0;
#endif
#if defined(MBEDTLS_SSL_ALPN)
const char *alpn_list[ALPN_LIST_SIZE];
#endif
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
unsigned char alloc_buf[MEMORY_HEAP_SIZE];
#endif
#if defined(MBEDTLS_ECP_C)
mbedtls_ecp_group_id curve_list[CURVE_LIST_SIZE];
const mbedtls_ecp_curve_info *curve_cur;
#endif
#if defined(MBEDTLS_SSL_DTLS_SRTP)
unsigned char mki[MBEDTLS_TLS_SRTP_MAX_MKI_LENGTH];
size_t mki_len=0;
#endif
const char *pers = "ssl_client2";
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_key_id_t slot = 0;
psa_algorithm_t alg = 0;
psa_key_attributes_t key_attributes;
psa_status_t status;
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_crt_profile crt_profile_for_test = mbedtls_x509_crt_profile_default;
#endif
rng_context_t rng;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_ssl_session saved_session;
unsigned char *session_data = NULL;
size_t session_data_len = 0;
#if defined(MBEDTLS_TIMING_C)
mbedtls_timing_delay_context timer;
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
uint32_t flags;
mbedtls_x509_crt cacert;
mbedtls_x509_crt clicert;
mbedtls_pk_context pkey;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_key_id_t key_slot = 0; /* invalid key slot */
#endif
#endif /* MBEDTLS_X509_CRT_PARSE_C */
char *p, *q;
const int *list;
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
unsigned char *context_buf = NULL;
size_t context_buf_len;
#endif
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
unsigned char eap_tls_keymaterial[16];
unsigned char eap_tls_iv[8];
const char* eap_tls_label = "client EAP encryption";
eap_tls_keys eap_tls_keying;
#if defined( MBEDTLS_SSL_DTLS_SRTP )
/*! master keys and master salt for SRTP generated during handshake */
unsigned char dtls_srtp_key_material[MBEDTLS_TLS_SRTP_MAX_KEY_MATERIAL_LENGTH];
const char* dtls_srtp_label = "EXTRACTOR-dtls_srtp";
dtls_srtp_keys dtls_srtp_keying;
const mbedtls_ssl_srtp_profile default_profiles[] = {
MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80,
MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32,
MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80,
MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32,
MBEDTLS_TLS_SRTP_UNSET
};
#endif /* MBEDTLS_SSL_DTLS_SRTP */
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
mbedtls_memory_buffer_alloc_init( alloc_buf, sizeof(alloc_buf) );
#endif
#if defined(MBEDTLS_TEST_HOOKS)
test_hooks_init( );
#endif /* MBEDTLS_TEST_HOOKS */
/*
* Make sure memory references are valid.
*/
mbedtls_net_init( &server_fd );
mbedtls_ssl_init( &ssl );
mbedtls_ssl_config_init( &conf );
memset( &saved_session, 0, sizeof( mbedtls_ssl_session ) );
rng_init( &rng );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_crt_init( &cacert );
mbedtls_x509_crt_init( &clicert );
mbedtls_pk_init( &pkey );
#endif
#if defined(MBEDTLS_SSL_ALPN)
memset( (void * ) alpn_list, 0, sizeof( alpn_list ) );
#endif
#if defined(MBEDTLS_USE_PSA_CRYPTO)
status = psa_crypto_init();
if( status != PSA_SUCCESS )
{
mbedtls_fprintf( stderr, "Failed to initialize PSA Crypto implementation: %d\n",
(int) status );
ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED;
goto exit;
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG)
mbedtls_test_enable_insecure_external_rng( );
#endif /* MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */
if( argc == 0 )
{
usage:
if( ret == 0 )
ret = 1;
mbedtls_printf( USAGE1 );
mbedtls_printf( USAGE2 );
mbedtls_printf( USAGE3 );
mbedtls_printf( USAGE4 );
list = mbedtls_ssl_list_ciphersuites();
while( *list )
{
mbedtls_printf(" %-42s", mbedtls_ssl_get_ciphersuite_name( *list ) );
list++;
if( !*list )
break;
mbedtls_printf(" %s\n", mbedtls_ssl_get_ciphersuite_name( *list ) );
list++;
}
mbedtls_printf("\n");
goto exit;
}
opt.server_name = DFL_SERVER_NAME;
opt.server_addr = DFL_SERVER_ADDR;
opt.server_port = DFL_SERVER_PORT;
opt.debug_level = DFL_DEBUG_LEVEL;
opt.cid_enabled = DFL_CID_ENABLED;
opt.cid_val = DFL_CID_VALUE;
opt.cid_enabled_renego = DFL_CID_ENABLED_RENEGO;
opt.cid_val_renego = DFL_CID_VALUE_RENEGO;
opt.nbio = DFL_NBIO;
opt.event = DFL_EVENT;
opt.context_crt_cb = DFL_CONTEXT_CRT_CB;
opt.read_timeout = DFL_READ_TIMEOUT;
opt.max_resend = DFL_MAX_RESEND;
opt.request_page = DFL_REQUEST_PAGE;
opt.request_size = DFL_REQUEST_SIZE;
opt.ca_file = DFL_CA_FILE;
opt.ca_path = DFL_CA_PATH;
opt.crt_file = DFL_CRT_FILE;
opt.key_file = DFL_KEY_FILE;
opt.key_opaque = DFL_KEY_OPAQUE;
opt.key_pwd = DFL_KEY_PWD;
opt.psk = DFL_PSK;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
opt.psk_opaque = DFL_PSK_OPAQUE;
#endif
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
opt.ca_callback = DFL_CA_CALLBACK;
#endif
opt.psk_identity = DFL_PSK_IDENTITY;
opt.ecjpake_pw = DFL_ECJPAKE_PW;
opt.ec_max_ops = DFL_EC_MAX_OPS;
opt.force_ciphersuite[0]= DFL_FORCE_CIPHER;
opt.renegotiation = DFL_RENEGOTIATION;
opt.allow_legacy = DFL_ALLOW_LEGACY;
opt.renegotiate = DFL_RENEGOTIATE;
opt.exchanges = DFL_EXCHANGES;
opt.min_version = DFL_MIN_VERSION;
opt.max_version = DFL_MAX_VERSION;
opt.allow_sha1 = DFL_SHA1;
opt.auth_mode = DFL_AUTH_MODE;
opt.mfl_code = DFL_MFL_CODE;
opt.trunc_hmac = DFL_TRUNC_HMAC;
opt.recsplit = DFL_RECSPLIT;
opt.dhmlen = DFL_DHMLEN;
opt.reconnect = DFL_RECONNECT;
opt.reco_delay = DFL_RECO_DELAY;
opt.reco_mode = DFL_RECO_MODE;
opt.reconnect_hard = DFL_RECONNECT_HARD;
opt.tickets = DFL_TICKETS;
opt.alpn_string = DFL_ALPN_STRING;
opt.curves = DFL_CURVES;
opt.transport = DFL_TRANSPORT;
opt.hs_to_min = DFL_HS_TO_MIN;
opt.hs_to_max = DFL_HS_TO_MAX;
opt.dtls_mtu = DFL_DTLS_MTU;
opt.fallback = DFL_FALLBACK;
opt.extended_ms = DFL_EXTENDED_MS;
opt.etm = DFL_ETM;
opt.dgram_packing = DFL_DGRAM_PACKING;
opt.serialize = DFL_SERIALIZE;
opt.context_file = DFL_CONTEXT_FILE;
opt.eap_tls = DFL_EAP_TLS;
opt.reproducible = DFL_REPRODUCIBLE;
opt.nss_keylog = DFL_NSS_KEYLOG;
opt.nss_keylog_file = DFL_NSS_KEYLOG_FILE;
opt.skip_close_notify = DFL_SKIP_CLOSE_NOTIFY;
opt.query_config_mode = DFL_QUERY_CONFIG_MODE;
opt.use_srtp = DFL_USE_SRTP;
opt.force_srtp_profile = DFL_SRTP_FORCE_PROFILE;
opt.mki = DFL_SRTP_MKI;
for( i = 1; i < argc; i++ )
{
p = argv[i];
if( ( q = strchr( p, '=' ) ) == NULL )
goto usage;
*q++ = '\0';
if( strcmp( p, "server_name" ) == 0 )
opt.server_name = q;
else if( strcmp( p, "server_addr" ) == 0 )
opt.server_addr = q;
else if( strcmp( p, "server_port" ) == 0 )
opt.server_port = q;
else if( strcmp( p, "dtls" ) == 0 )
{
int t = atoi( q );
if( t == 0 )
opt.transport = MBEDTLS_SSL_TRANSPORT_STREAM;
else if( t == 1 )
opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM;
else
goto usage;
}
else if( strcmp( p, "debug_level" ) == 0 )
{
opt.debug_level = atoi( q );
if( opt.debug_level < 0 || opt.debug_level > 65535 )
goto usage;
}
else if( strcmp( p, "context_crt_cb" ) == 0 )
{
opt.context_crt_cb = atoi( q );
if( opt.context_crt_cb != 0 && opt.context_crt_cb != 1 )
goto usage;
}
else if( strcmp( p, "nbio" ) == 0 )
{
opt.nbio = atoi( q );
if( opt.nbio < 0 || opt.nbio > 2 )
goto usage;
}
else if( strcmp( p, "event" ) == 0 )
{
opt.event = atoi( q );
if( opt.event < 0 || opt.event > 2 )
goto usage;
}
else if( strcmp( p, "read_timeout" ) == 0 )
opt.read_timeout = atoi( q );
else if( strcmp( p, "max_resend" ) == 0 )
{
opt.max_resend = atoi( q );
if( opt.max_resend < 0 )
goto usage;
}
else if( strcmp( p, "request_page" ) == 0 )
opt.request_page = q;
else if( strcmp( p, "request_size" ) == 0 )
{
opt.request_size = atoi( q );
if( opt.request_size < 0 ||
opt.request_size > MAX_REQUEST_SIZE )
goto usage;
}
else if( strcmp( p, "ca_file" ) == 0 )
opt.ca_file = q;
else if( strcmp( p, "ca_path" ) == 0 )
opt.ca_path = q;
else if( strcmp( p, "crt_file" ) == 0 )
opt.crt_file = q;
else if( strcmp( p, "key_file" ) == 0 )
opt.key_file = q;
else if( strcmp( p, "key_pwd" ) == 0 )
opt.key_pwd = q;
#if defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_X509_CRT_PARSE_C)
else if( strcmp( p, "key_opaque" ) == 0 )
opt.key_opaque = atoi( q );
#endif
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
else if( strcmp( p, "cid" ) == 0 )
{
opt.cid_enabled = atoi( q );
if( opt.cid_enabled != 0 && opt.cid_enabled != 1 )
goto usage;
}
else if( strcmp( p, "cid_renego" ) == 0 )
{
opt.cid_enabled_renego = atoi( q );
if( opt.cid_enabled_renego != 0 && opt.cid_enabled_renego != 1 )
goto usage;
}
else if( strcmp( p, "cid_val" ) == 0 )
{
opt.cid_val = q;
}
else if( strcmp( p, "cid_val_renego" ) == 0 )
{
opt.cid_val_renego = q;
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
else if( strcmp( p, "psk" ) == 0 )
opt.psk = q;
#if defined(MBEDTLS_USE_PSA_CRYPTO)
else if( strcmp( p, "psk_opaque" ) == 0 )
opt.psk_opaque = atoi( q );
#endif
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
else if( strcmp( p, "ca_callback" ) == 0)
opt.ca_callback = atoi( q );
#endif
else if( strcmp( p, "psk_identity" ) == 0 )
opt.psk_identity = q;
else if( strcmp( p, "ecjpake_pw" ) == 0 )
opt.ecjpake_pw = q;
else if( strcmp( p, "ec_max_ops" ) == 0 )
opt.ec_max_ops = atoi( q );
else if( strcmp( p, "force_ciphersuite" ) == 0 )
{
opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q );
if( opt.force_ciphersuite[0] == 0 )
{
ret = 2;
goto usage;
}
opt.force_ciphersuite[1] = 0;
}
else if( strcmp( p, "renegotiation" ) == 0 )
{
opt.renegotiation = (atoi( q )) ?
MBEDTLS_SSL_RENEGOTIATION_ENABLED :
MBEDTLS_SSL_RENEGOTIATION_DISABLED;
}
else if( strcmp( p, "allow_legacy" ) == 0 )
{
switch( atoi( q ) )
{
case -1:
opt.allow_legacy = MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE;
break;
case 0:
opt.allow_legacy = MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION;
break;
case 1:
opt.allow_legacy = MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION;
break;
default: goto usage;
}
}
else if( strcmp( p, "renegotiate" ) == 0 )
{
opt.renegotiate = atoi( q );
if( opt.renegotiate < 0 || opt.renegotiate > 1 )
goto usage;
}
else if( strcmp( p, "exchanges" ) == 0 )
{
opt.exchanges = atoi( q );
if( opt.exchanges < 1 )
goto usage;
}
else if( strcmp( p, "reconnect" ) == 0 )
{
opt.reconnect = atoi( q );
if( opt.reconnect < 0 || opt.reconnect > 2 )
goto usage;
}
else if( strcmp( p, "reco_delay" ) == 0 )
{
opt.reco_delay = atoi( q );
if( opt.reco_delay < 0 )
goto usage;
}
else if( strcmp( p, "reco_mode" ) == 0 )
{
opt.reco_mode = atoi( q );
if( opt.reco_mode < 0 )
goto usage;
}
else if( strcmp( p, "reconnect_hard" ) == 0 )
{
opt.reconnect_hard = atoi( q );
if( opt.reconnect_hard < 0 || opt.reconnect_hard > 1 )
goto usage;
}
else if( strcmp( p, "tickets" ) == 0 )
{
opt.tickets = atoi( q );
if( opt.tickets < 0 || opt.tickets > 2 )
goto usage;
}
else if( strcmp( p, "alpn" ) == 0 )
{
opt.alpn_string = q;
}
else if( strcmp( p, "fallback" ) == 0 )
{
switch( atoi( q ) )
{
case 0: opt.fallback = MBEDTLS_SSL_IS_NOT_FALLBACK; break;
case 1: opt.fallback = MBEDTLS_SSL_IS_FALLBACK; break;
default: goto usage;
}
}
else if( strcmp( p, "extended_ms" ) == 0 )
{
switch( atoi( q ) )
{
case 0:
opt.extended_ms = MBEDTLS_SSL_EXTENDED_MS_DISABLED;
break;
case 1:
opt.extended_ms = MBEDTLS_SSL_EXTENDED_MS_ENABLED;
break;
default: goto usage;
}
}
else if( strcmp( p, "curves" ) == 0 )
opt.curves = q;
else if( strcmp( p, "etm" ) == 0 )
{
switch( atoi( q ) )
{
case 0: opt.etm = MBEDTLS_SSL_ETM_DISABLED; break;
case 1: opt.etm = MBEDTLS_SSL_ETM_ENABLED; break;
default: goto usage;
}
}
else if( strcmp( p, "min_version" ) == 0 )
{
if( strcmp( q, "tls1" ) == 0 )
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_1;
else if( strcmp( q, "tls1_1" ) == 0 ||
strcmp( q, "dtls1" ) == 0 )
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2;
else if( strcmp( q, "tls1_2" ) == 0 ||
strcmp( q, "dtls1_2" ) == 0 )
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3;
else
goto usage;
}
else if( strcmp( p, "max_version" ) == 0 )
{
if( strcmp( q, "tls1" ) == 0 )
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_1;
else if( strcmp( q, "tls1_1" ) == 0 ||
strcmp( q, "dtls1" ) == 0 )
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2;
else if( strcmp( q, "tls1_2" ) == 0 ||
strcmp( q, "dtls1_2" ) == 0 )
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3;
else
goto usage;
}
else if( strcmp( p, "allow_sha1" ) == 0 )
{
switch( atoi( q ) )
{
case 0: opt.allow_sha1 = 0; break;
case 1: opt.allow_sha1 = 1; break;
default: goto usage;
}
}
else if( strcmp( p, "force_version" ) == 0 )
{
if( strcmp( q, "tls1" ) == 0 )
{
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_1;
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_1;
}
else if( strcmp( q, "tls1_1" ) == 0 )
{
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2;
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2;
}
else if( strcmp( q, "tls1_2" ) == 0 )
{
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3;
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3;
}
else if( strcmp( q, "dtls1" ) == 0 )
{
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2;
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2;
opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM;
}
else if( strcmp( q, "dtls1_2" ) == 0 )
{
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3;
opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3;
opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM;
}
else
goto usage;
}
else if( strcmp( p, "auth_mode" ) == 0 )
{
if( strcmp( q, "none" ) == 0 )
opt.auth_mode = MBEDTLS_SSL_VERIFY_NONE;
else if( strcmp( q, "optional" ) == 0 )
opt.auth_mode = MBEDTLS_SSL_VERIFY_OPTIONAL;
else if( strcmp( q, "required" ) == 0 )
opt.auth_mode = MBEDTLS_SSL_VERIFY_REQUIRED;
else
goto usage;
}
else if( strcmp( p, "max_frag_len" ) == 0 )
{
if( strcmp( q, "512" ) == 0 )
opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_512;
else if( strcmp( q, "1024" ) == 0 )
opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_1024;
else if( strcmp( q, "2048" ) == 0 )
opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_2048;
else if( strcmp( q, "4096" ) == 0 )
opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_4096;
else
goto usage;
}
else if( strcmp( p, "trunc_hmac" ) == 0 )
{
switch( atoi( q ) )
{
case 0: opt.trunc_hmac = MBEDTLS_SSL_TRUNC_HMAC_DISABLED; break;
case 1: opt.trunc_hmac = MBEDTLS_SSL_TRUNC_HMAC_ENABLED; break;
default: goto usage;
}
}
else if( strcmp( p, "hs_timeout" ) == 0 )
{
if( ( p = strchr( q, '-' ) ) == NULL )
goto usage;
*p++ = '\0';
opt.hs_to_min = atoi( q );
opt.hs_to_max = atoi( p );
if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min )
goto usage;
}
else if( strcmp( p, "mtu" ) == 0 )
{
opt.dtls_mtu = atoi( q );
if( opt.dtls_mtu < 0 )
goto usage;
}
else if( strcmp( p, "dgram_packing" ) == 0 )
{
opt.dgram_packing = atoi( q );
if( opt.dgram_packing != 0 &&
opt.dgram_packing != 1 )
{
goto usage;
}
}
else if( strcmp( p, "recsplit" ) == 0 )
{
opt.recsplit = atoi( q );
if( opt.recsplit < 0 || opt.recsplit > 1 )
goto usage;
}
else if( strcmp( p, "dhmlen" ) == 0 )
{
opt.dhmlen = atoi( q );
if( opt.dhmlen < 0 )
goto usage;
}
else if( strcmp( p, "query_config" ) == 0 )
{
opt.query_config_mode = 1;
query_config_ret = query_config( q );
goto exit;
}
else if( strcmp( p, "serialize") == 0 )
{
opt.serialize = atoi( q );
if( opt.serialize < 0 || opt.serialize > 2)
goto usage;
}
else if( strcmp( p, "context_file") == 0 )
{
opt.context_file = q;
}
else if( strcmp( p, "eap_tls" ) == 0 )
{
opt.eap_tls = atoi( q );
if( opt.eap_tls < 0 || opt.eap_tls > 1 )
goto usage;
}
else if( strcmp( p, "reproducible" ) == 0 )
{
opt.reproducible = 1;
}
else if( strcmp( p, "nss_keylog" ) == 0 )
{
opt.nss_keylog = atoi( q );
if( opt.nss_keylog < 0 || opt.nss_keylog > 1 )
goto usage;
}
else if( strcmp( p, "nss_keylog_file" ) == 0 )
{
opt.nss_keylog_file = q;
}
else if( strcmp( p, "skip_close_notify" ) == 0 )
{
opt.skip_close_notify = atoi( q );
if( opt.skip_close_notify < 0 || opt.skip_close_notify > 1 )
goto usage;
}
else if( strcmp( p, "use_srtp" ) == 0 )
{
opt.use_srtp = atoi ( q );
}
else if( strcmp( p, "srtp_force_profile" ) == 0 )
{
opt.force_srtp_profile = atoi( q );
}
else if( strcmp( p, "mki" ) == 0 )
{
opt.mki = q;
}
else
goto usage;
}
if( opt.nss_keylog != 0 && opt.eap_tls != 0 )
{
mbedtls_printf( "Error: eap_tls and nss_keylog options cannot be used together.\n" );
goto usage;
}
/* Event-driven IO is incompatible with the above custom
* receive and send functions, as the polling builds on
* refers to the underlying net_context. */
if( opt.event == 1 && opt.nbio != 1 )
{
mbedtls_printf( "Warning: event-driven IO mandates nbio=1 - overwrite\n" );
opt.nbio = 1;
}
#if defined(MBEDTLS_DEBUG_C)
mbedtls_debug_set_threshold( opt.debug_level );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
/*
* Unhexify the pre-shared key if any is given
*/
if( strlen( opt.psk ) )
{
if( mbedtls_test_unhexify( psk, sizeof( psk ),
opt.psk, &psk_len ) != 0 )
{
mbedtls_printf( "pre-shared key not valid\n" );
goto exit;
}
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( opt.psk_opaque != 0 )
{
if( opt.psk == NULL )
{
mbedtls_printf( "psk_opaque set but no psk to be imported specified.\n" );
ret = 2;
goto usage;
}
if( opt.force_ciphersuite[0] <= 0 )
{
mbedtls_printf( "opaque PSKs are only supported in conjunction with forcing TLS 1.2 and a PSK-only ciphersuite through the 'force_ciphersuite' option.\n" );
ret = 2;
goto usage;
}
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
if( opt.force_ciphersuite[0] > 0 )
{
const mbedtls_ssl_ciphersuite_t *ciphersuite_info;
ciphersuite_info =
mbedtls_ssl_ciphersuite_from_id( opt.force_ciphersuite[0] );
if( opt.max_version != -1 &&
ciphersuite_info->min_minor_ver > opt.max_version )
{
mbedtls_printf( "forced ciphersuite not allowed with this protocol version\n" );
ret = 2;
goto usage;
}
if( opt.min_version != -1 &&
ciphersuite_info->max_minor_ver < opt.min_version )
{
mbedtls_printf( "forced ciphersuite not allowed with this protocol version\n" );
ret = 2;
goto usage;
}
/* If the server selects a version that's not supported by
* this suite, then there will be no common ciphersuite... */
if( opt.max_version == -1 ||
opt.max_version > ciphersuite_info->max_minor_ver )
{
opt.max_version = ciphersuite_info->max_minor_ver;
}
if( opt.min_version < ciphersuite_info->min_minor_ver )
{
opt.min_version = ciphersuite_info->min_minor_ver;
/* DTLS starts with TLS 1.1 */
if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM &&
opt.min_version < MBEDTLS_SSL_MINOR_VERSION_2 )
opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2;
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( opt.psk_opaque != 0 )
{
/* Ensure that the chosen ciphersuite is PSK-only; we must know
* the ciphersuite in advance to set the correct policy for the
* PSK key slot. This limitation might go away in the future. */
if( ciphersuite_info->key_exchange != MBEDTLS_KEY_EXCHANGE_PSK ||
opt.min_version != MBEDTLS_SSL_MINOR_VERSION_3 )
{
mbedtls_printf( "opaque PSKs are only supported in conjunction with forcing TLS 1.2 and a PSK-only ciphersuite through the 'force_ciphersuite' option.\n" );
ret = 2;
goto usage;
}
/* Determine KDF algorithm the opaque PSK will be used in. */
#if defined(MBEDTLS_SHA384_C)
if( ciphersuite_info->mac == MBEDTLS_MD_SHA384 )
alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_384);
else
#endif /* MBEDTLS_SHA384_C */
alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_256);
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
}
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
if( mbedtls_test_unhexify( cid, sizeof( cid ),
opt.cid_val, &cid_len ) != 0 )
{
mbedtls_printf( "CID not valid\n" );
goto exit;
}
/* Keep CID settings for renegotiation unless
* specified otherwise. */
if( opt.cid_enabled_renego == DFL_CID_ENABLED_RENEGO )
opt.cid_enabled_renego = opt.cid_enabled;
if( opt.cid_val_renego == DFL_CID_VALUE_RENEGO )
opt.cid_val_renego = opt.cid_val;
if( mbedtls_test_unhexify( cid_renego, sizeof( cid_renego ),
opt.cid_val_renego, &cid_renego_len ) != 0 )
{
mbedtls_printf( "CID not valid\n" );
goto exit;
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#if defined(MBEDTLS_ECP_C)
if( opt.curves != NULL )
{
p = (char *) opt.curves;
i = 0;
if( strcmp( p, "none" ) == 0 )
{
curve_list[0] = MBEDTLS_ECP_DP_NONE;
}
else if( strcmp( p, "default" ) != 0 )
{
/* Leave room for a final NULL in curve list */
while( i < CURVE_LIST_SIZE - 1 && *p != '\0' )
{
q = p;
/* Terminate the current string */
while( *p != ',' && *p != '\0' )
p++;
if( *p == ',' )
*p++ = '\0';
if( ( curve_cur = mbedtls_ecp_curve_info_from_name( q ) ) != NULL )
{
curve_list[i++] = curve_cur->grp_id;
}
else
{
mbedtls_printf( "unknown curve %s\n", q );
mbedtls_printf( "supported curves: " );
for( curve_cur = mbedtls_ecp_curve_list();
curve_cur->grp_id != MBEDTLS_ECP_DP_NONE;
curve_cur++ )
{
mbedtls_printf( "%s ", curve_cur->name );
}
mbedtls_printf( "\n" );
goto exit;
}
}
mbedtls_printf("Number of curves: %d\n", i );
if( i == CURVE_LIST_SIZE - 1 && *p != '\0' )
{
mbedtls_printf( "curves list too long, maximum %d",
CURVE_LIST_SIZE - 1 );
goto exit;
}
curve_list[i] = MBEDTLS_ECP_DP_NONE;
}
}
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_SSL_ALPN)
if( opt.alpn_string != NULL )
{
p = (char *) opt.alpn_string;
i = 0;
/* Leave room for a final NULL in alpn_list */
while( i < ALPN_LIST_SIZE - 1 && *p != '\0' )
{
alpn_list[i++] = p;
/* Terminate the current string and move on to next one */
while( *p != ',' && *p != '\0' )
p++;
if( *p == ',' )
*p++ = '\0';
}
}
#endif /* MBEDTLS_SSL_ALPN */
/*
* 0. Initialize the RNG and the session data
*/
mbedtls_printf( "\n . Seeding the random number generator..." );
fflush( stdout );
ret = rng_seed( &rng, opt.reproducible, pers );
if( ret != 0 )
goto exit;
mbedtls_printf( " ok\n" );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/*
* 1.1. Load the trusted CA
*/
mbedtls_printf( " . Loading the CA root certificate ..." );
fflush( stdout );
if( strcmp( opt.ca_path, "none" ) == 0 ||
strcmp( opt.ca_file, "none" ) == 0 )
{
ret = 0;
}
else
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.ca_path ) )
ret = mbedtls_x509_crt_parse_path( &cacert, opt.ca_path );
else if( strlen( opt.ca_file ) )
ret = mbedtls_x509_crt_parse_file( &cacert, opt.ca_file );
else
#endif
{
#if defined(MBEDTLS_PEM_PARSE_C)
for( i = 0; mbedtls_test_cas[i] != NULL; i++ )
{
ret = mbedtls_x509_crt_parse( &cacert,
(const unsigned char *) mbedtls_test_cas[i],
mbedtls_test_cas_len[i] );
if( ret != 0 )
break;
}
if( ret == 0 )
#endif /* MBEDTLS_PEM_PARSE_C */
for( i = 0; mbedtls_test_cas_der[i] != NULL; i++ )
{
ret = mbedtls_x509_crt_parse_der( &cacert,
(const unsigned char *) mbedtls_test_cas_der[i],
mbedtls_test_cas_der_len[i] );
if( ret != 0 )
break;
}
}
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
mbedtls_printf( " ok (%d skipped)\n", ret );
/*
* 1.2. Load own certificate and private key
*
* (can be skipped if client authentication is not required)
*/
mbedtls_printf( " . Loading the client cert. and key..." );
fflush( stdout );
if( strcmp( opt.crt_file, "none" ) == 0 )
ret = 0;
else
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.crt_file ) )
ret = mbedtls_x509_crt_parse_file( &clicert, opt.crt_file );
else
#endif
ret = mbedtls_x509_crt_parse( &clicert,
(const unsigned char *) mbedtls_test_cli_crt,
mbedtls_test_cli_crt_len );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
if( strcmp( opt.key_file, "none" ) == 0 )
ret = 0;
else
#if defined(MBEDTLS_FS_IO)
if( strlen( opt.key_file ) )
ret = mbedtls_pk_parse_keyfile( &pkey, opt.key_file, opt.key_pwd );
else
#endif
ret = mbedtls_pk_parse_key( &pkey,
(const unsigned char *) mbedtls_test_cli_key,
mbedtls_test_cli_key_len, NULL, 0 );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( opt.key_opaque != 0 )
{
if( ( ret = mbedtls_pk_wrap_as_opaque( &pkey, &key_slot,
PSA_ALG_SHA_256 ) ) != 0 )
{
mbedtls_printf( " failed\n ! "
"mbedtls_pk_wrap_as_opaque returned -0x%x\n\n", (unsigned int) -ret );
goto exit;
}
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
mbedtls_printf( " ok (key type: %s)\n", mbedtls_pk_get_name( &pkey ) );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/*
* 2. Start the connection
*/
if( opt.server_addr == NULL)
opt.server_addr = opt.server_name;
mbedtls_printf( " . Connecting to %s/%s/%s...",
opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ? "tcp" : "udp",
opt.server_addr, opt.server_port );
fflush( stdout );
if( ( ret = mbedtls_net_connect( &server_fd,
opt.server_addr, opt.server_port,
opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ?
MBEDTLS_NET_PROTO_TCP : MBEDTLS_NET_PROTO_UDP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
if( opt.nbio > 0 )
ret = mbedtls_net_set_nonblock( &server_fd );
else
ret = mbedtls_net_set_block( &server_fd );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! net_set_(non)block() returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/*
* 3. Setup stuff
*/
mbedtls_printf( " . Setting up the SSL/TLS structure..." );
fflush( stdout );
if( ( ret = mbedtls_ssl_config_defaults( &conf,
MBEDTLS_SSL_IS_CLIENT,
opt.transport,
MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/* The default algorithms profile disables SHA-1, but our tests still
rely on it heavily. */
if( opt.allow_sha1 > 0 )
{
crt_profile_for_test.allowed_mds |= MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA1 );
mbedtls_ssl_conf_cert_profile( &conf, &crt_profile_for_test );
mbedtls_ssl_conf_sig_hashes( &conf, ssl_sig_hashes_for_test );
}
if( opt.context_crt_cb == 0 )
mbedtls_ssl_conf_verify( &conf, my_verify, NULL );
memset( peer_crt_info, 0, sizeof( peer_crt_info ) );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
if( opt.cid_enabled == 1 || opt.cid_enabled_renego == 1 )
{
if( opt.cid_enabled == 1 &&
opt.cid_enabled_renego == 1 &&
cid_len != cid_renego_len )
{
mbedtls_printf( "CID length must not change during renegotiation\n" );
goto usage;
}
if( opt.cid_enabled == 1 )
ret = mbedtls_ssl_conf_cid( &conf, cid_len,
MBEDTLS_SSL_UNEXPECTED_CID_IGNORE );
else
ret = mbedtls_ssl_conf_cid( &conf, cid_renego_len,
MBEDTLS_SSL_UNEXPECTED_CID_IGNORE );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_cid_len returned -%#04x\n\n",
(unsigned int) -ret );
goto exit;
}
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
if( opt.auth_mode != DFL_AUTH_MODE )
mbedtls_ssl_conf_authmode( &conf, opt.auth_mode );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX )
mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min,
opt.hs_to_max );
if( opt.dgram_packing != DFL_DGRAM_PACKING )
mbedtls_ssl_set_datagram_packing( &ssl, opt.dgram_packing );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
if( ( ret = mbedtls_ssl_conf_max_frag_len( &conf, opt.mfl_code ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_max_frag_len returned %d\n\n",
ret );
goto exit;
}
#endif
#if defined(MBEDTLS_SSL_DTLS_SRTP)
const mbedtls_ssl_srtp_profile forced_profile[] =
{ opt.force_srtp_profile, MBEDTLS_TLS_SRTP_UNSET };
if( opt.use_srtp == 1 )
{
if( opt.force_srtp_profile != 0 )
{
ret = mbedtls_ssl_conf_dtls_srtp_protection_profiles ( &conf, forced_profile );
}
else
{
ret = mbedtls_ssl_conf_dtls_srtp_protection_profiles ( &conf, default_profiles );
}
if( ret != 0 )
{
mbedtls_printf( " failed\n ! "
"mbedtls_ssl_conf_dtls_srtp_protection_profiles returned %d\n\n",
ret );
goto exit;
}
}
else if( opt.force_srtp_profile != 0 )
{
mbedtls_printf( " failed\n ! must enable use_srtp to force srtp profile\n\n" );
goto exit;
}
#endif /* MBEDTLS_SSL_DTLS_SRTP */
#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
if( opt.trunc_hmac != DFL_TRUNC_HMAC )
mbedtls_ssl_conf_truncated_hmac( &conf, opt.trunc_hmac );
#endif
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
if( opt.extended_ms != DFL_EXTENDED_MS )
mbedtls_ssl_conf_extended_master_secret( &conf, opt.extended_ms );
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
if( opt.etm != DFL_ETM )
mbedtls_ssl_conf_encrypt_then_mac( &conf, opt.etm );
#endif
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
if( opt.eap_tls != 0 )
{
mbedtls_ssl_conf_export_keys_ext_cb( &conf, eap_tls_key_derivation,
&eap_tls_keying );
}
else if( opt.nss_keylog != 0 )
{
mbedtls_ssl_conf_export_keys_ext_cb( &conf,
nss_keylog_export,
NULL );
}
#if defined( MBEDTLS_SSL_DTLS_SRTP )
else if( opt.use_srtp != 0 )
{
mbedtls_ssl_conf_export_keys_ext_cb( &conf, dtls_srtp_key_derivation,
&dtls_srtp_keying );
}
#endif /* MBEDTLS_SSL_DTLS_SRTP */
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
if( opt.recsplit != DFL_RECSPLIT )
mbedtls_ssl_conf_cbc_record_splitting( &conf, opt.recsplit
? MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED
: MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED );
#endif
#if defined(MBEDTLS_DHM_C)
if( opt.dhmlen != DFL_DHMLEN )
mbedtls_ssl_conf_dhm_min_bitlen( &conf, opt.dhmlen );
#endif
#if defined(MBEDTLS_SSL_ALPN)
if( opt.alpn_string != NULL )
if( ( ret = mbedtls_ssl_conf_alpn_protocols( &conf, alpn_list ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_alpn_protocols returned %d\n\n",
ret );
goto exit;
}
#endif
if (opt.reproducible)
{
#if defined(MBEDTLS_HAVE_TIME)
#if defined(MBEDTLS_PLATFORM_TIME_ALT)
mbedtls_platform_set_time( dummy_constant_time );
#else
fprintf( stderr, "Warning: reproducible option used without constant time\n" );
#endif
#endif /* MBEDTLS_HAVE_TIME */
}
mbedtls_ssl_conf_rng( &conf, rng_get, &rng );
mbedtls_ssl_conf_dbg( &conf, my_debug, stdout );
mbedtls_ssl_conf_read_timeout( &conf, opt.read_timeout );
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
mbedtls_ssl_conf_session_tickets( &conf, opt.tickets );
#endif
if( opt.force_ciphersuite[0] != DFL_FORCE_CIPHER )
mbedtls_ssl_conf_ciphersuites( &conf, opt.force_ciphersuite );
if( opt.allow_legacy != DFL_ALLOW_LEGACY )
mbedtls_ssl_conf_legacy_renegotiation( &conf, opt.allow_legacy );
#if defined(MBEDTLS_SSL_RENEGOTIATION)
mbedtls_ssl_conf_renegotiation( &conf, opt.renegotiation );
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( strcmp( opt.ca_path, "none" ) != 0 &&
strcmp( opt.ca_file, "none" ) != 0 )
{
#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
if( opt.ca_callback != 0 )
mbedtls_ssl_conf_ca_cb( &conf, ca_callback, &cacert );
else
#endif
mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL );
}
if( strcmp( opt.crt_file, "none" ) != 0 &&
strcmp( opt.key_file, "none" ) != 0 )
{
if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &clicert, &pkey ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n",
ret );
goto exit;
}
}
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_ECP_C)
if( opt.curves != NULL &&
strcmp( opt.curves, "default" ) != 0 )
{
mbedtls_ssl_conf_curves( &conf, curve_list );
}
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
if( opt.psk_opaque != 0 )
{
key_attributes = psa_key_attributes_init();
psa_set_key_usage_flags( &key_attributes, PSA_KEY_USAGE_DERIVE );
psa_set_key_algorithm( &key_attributes, alg );
psa_set_key_type( &key_attributes, PSA_KEY_TYPE_DERIVE );
status = psa_import_key( &key_attributes, psk, psk_len, &slot );
if( status != PSA_SUCCESS )
{
ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED;
goto exit;
}
if( ( ret = mbedtls_ssl_conf_psk_opaque( &conf, slot,
(const unsigned char *) opt.psk_identity,
strlen( opt.psk_identity ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_psk_opaque returned %d\n\n",
ret );
goto exit;
}
}
else
#endif /* MBEDTLS_USE_PSA_CRYPTO */
if( psk_len > 0 )
{
ret = mbedtls_ssl_conf_psk( &conf, psk, psk_len,
(const unsigned char *) opt.psk_identity,
strlen( opt.psk_identity ) );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_conf_psk returned %d\n\n", ret );
goto exit;
}
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
if( opt.min_version != DFL_MIN_VERSION )
mbedtls_ssl_conf_min_version( &conf, MBEDTLS_SSL_MAJOR_VERSION_3,
opt.min_version );
if( opt.max_version != DFL_MAX_VERSION )
mbedtls_ssl_conf_max_version( &conf, MBEDTLS_SSL_MAJOR_VERSION_3,
opt.max_version );
#if defined(MBEDTLS_SSL_FALLBACK_SCSV)
if( opt.fallback != DFL_FALLBACK )
mbedtls_ssl_conf_fallback( &conf, opt.fallback );
#endif
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( ( ret = mbedtls_ssl_set_hostname( &ssl, opt.server_name ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n",
ret );
goto exit;
}
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
if( opt.ecjpake_pw != DFL_ECJPAKE_PW )
{
if( ( ret = mbedtls_ssl_set_hs_ecjpake_password( &ssl,
(const unsigned char *) opt.ecjpake_pw,
strlen( opt.ecjpake_pw ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_hs_ecjpake_password returned %d\n\n",
ret );
goto exit;
}
}
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
if( opt.context_crt_cb == 1 )
mbedtls_ssl_set_verify( &ssl, my_verify, NULL );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
io_ctx.ssl = &ssl;
io_ctx.net = &server_fd;
mbedtls_ssl_set_bio( &ssl, &io_ctx, send_cb, recv_cb,
opt.nbio == 0 ? recv_timeout_cb : NULL );
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
if( ( ret = mbedtls_ssl_set_cid( &ssl, opt.cid_enabled,
cid, cid_len ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_cid returned %d\n\n",
ret );
goto exit;
}
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( opt.dtls_mtu != DFL_DTLS_MTU )
mbedtls_ssl_set_mtu( &ssl, opt.dtls_mtu );
#endif
#if defined(MBEDTLS_TIMING_C)
mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay,
mbedtls_timing_get_delay );
#endif
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( opt.ec_max_ops != DFL_EC_MAX_OPS )
mbedtls_ecp_set_max_ops( opt.ec_max_ops );
#endif
#if defined(MBEDTLS_SSL_DTLS_SRTP)
if( opt.use_srtp != 0 && strlen( opt.mki ) != 0 )
{
if( mbedtls_test_unhexify( mki, sizeof( mki ),
opt.mki,&mki_len ) != 0 )
{
mbedtls_printf( "mki value not valid hex\n" );
goto exit;
}
mbedtls_ssl_conf_srtp_mki_value_supported( &conf, MBEDTLS_SSL_DTLS_SRTP_MKI_SUPPORTED );
if( ( ret = mbedtls_ssl_dtls_srtp_set_mki_value( &ssl, mki,
(uint16_t) strlen( opt.mki ) / 2 ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_dtls_srtp_set_mki_value returned %d\n\n", ret );
goto exit;
}
}
#endif
mbedtls_printf( " ok\n" );
/*
* 4. Handshake
*/
mbedtls_printf( " . Performing the SSL/TLS handshake..." );
fflush( stdout );
while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE &&
ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n",
(unsigned int) -ret );
if( ret == MBEDTLS_ERR_X509_CERT_VERIFY_FAILED )
mbedtls_printf(
" Unable to verify the server's certificate. "
"Either it is invalid,\n"
" or you didn't set ca_file or ca_path "
"to an appropriate value.\n"
" Alternatively, you may want to use "
"auth_mode=optional for testing purposes.\n" );
mbedtls_printf( "\n" );
goto exit;
}
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
continue;
#endif
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
ret = idle( &server_fd, &timer, ret );
#else
ret = idle( &server_fd, ret );
#endif
if( ret != 0 )
goto exit;
}
}
mbedtls_printf( " ok\n [ Protocol is %s ]\n [ Ciphersuite is %s ]\n",
mbedtls_ssl_get_version( &ssl ),
mbedtls_ssl_get_ciphersuite( &ssl ) );
if( ( ret = mbedtls_ssl_get_record_expansion( &ssl ) ) >= 0 )
mbedtls_printf( " [ Record expansion is %d ]\n", ret );
else
mbedtls_printf( " [ Record expansion is unknown ]\n" );
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
mbedtls_printf( " [ Maximum input fragment length is %u ]\n",
(unsigned int) mbedtls_ssl_get_input_max_frag_len( &ssl ) );
mbedtls_printf( " [ Maximum output fragment length is %u ]\n",
(unsigned int) mbedtls_ssl_get_output_max_frag_len( &ssl ) );
#endif
#if defined(MBEDTLS_SSL_ALPN)
if( opt.alpn_string != NULL )
{
const char *alp = mbedtls_ssl_get_alpn_protocol( &ssl );
mbedtls_printf( " [ Application Layer Protocol is %s ]\n",
alp ? alp : "(none)" );
}
#endif
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
if( opt.eap_tls != 0 )
{
size_t j = 0;
if( ( ret = mbedtls_ssl_tls_prf( eap_tls_keying.tls_prf_type,
eap_tls_keying.master_secret,
sizeof( eap_tls_keying.master_secret ),
eap_tls_label,
eap_tls_keying.randbytes,
sizeof( eap_tls_keying.randbytes ),
eap_tls_keymaterial,
sizeof( eap_tls_keymaterial ) ) )
!= 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
mbedtls_printf( " EAP-TLS key material is:" );
for( j = 0; j < sizeof( eap_tls_keymaterial ); j++ )
{
if( j % 8 == 0 )
mbedtls_printf("\n ");
mbedtls_printf("%02x ", eap_tls_keymaterial[j] );
}
mbedtls_printf("\n");
if( ( ret = mbedtls_ssl_tls_prf( eap_tls_keying.tls_prf_type, NULL, 0,
eap_tls_label,
eap_tls_keying.randbytes,
sizeof( eap_tls_keying.randbytes ),
eap_tls_iv,
sizeof( eap_tls_iv ) ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
mbedtls_printf( " EAP-TLS IV is:" );
for( j = 0; j < sizeof( eap_tls_iv ); j++ )
{
if( j % 8 == 0 )
mbedtls_printf("\n ");
mbedtls_printf("%02x ", eap_tls_iv[j] );
}
mbedtls_printf("\n");
}
#if defined( MBEDTLS_SSL_DTLS_SRTP )
else if( opt.use_srtp != 0 )
{
size_t j = 0;
mbedtls_dtls_srtp_info dtls_srtp_negotiation_result;
mbedtls_ssl_get_dtls_srtp_negotiation_result( &ssl, &dtls_srtp_negotiation_result );
if( dtls_srtp_negotiation_result.chosen_dtls_srtp_profile
== MBEDTLS_TLS_SRTP_UNSET )
{
mbedtls_printf( " Unable to negotiate "
"the use of DTLS-SRTP\n" );
}
else
{
if( ( ret = mbedtls_ssl_tls_prf( dtls_srtp_keying.tls_prf_type,
dtls_srtp_keying.master_secret,
sizeof( dtls_srtp_keying.master_secret ),
dtls_srtp_label,
dtls_srtp_keying.randbytes,
sizeof( dtls_srtp_keying.randbytes ),
dtls_srtp_key_material,
sizeof( dtls_srtp_key_material ) ) )
!= 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
mbedtls_printf( " DTLS-SRTP key material is:" );
for( j = 0; j < sizeof( dtls_srtp_key_material ); j++ )
{
if( j % 8 == 0 )
mbedtls_printf( "\n " );
mbedtls_printf( "%02x ", dtls_srtp_key_material[j] );
}
mbedtls_printf( "\n" );
/* produce a less readable output used to perform automatic checks
* - compare client and server output
* - interop test with openssl which client produces this kind of output
*/
mbedtls_printf( " Keying material: " );
for( j = 0; j < sizeof( dtls_srtp_key_material ); j++ )
{
mbedtls_printf( "%02X", dtls_srtp_key_material[j] );
}
mbedtls_printf( "\n" );
if ( dtls_srtp_negotiation_result.mki_len > 0 )
{
mbedtls_printf( " DTLS-SRTP mki value: " );
for( j = 0; j < dtls_srtp_negotiation_result.mki_len; j++ )
{
mbedtls_printf( "%02X", dtls_srtp_negotiation_result.mki_value[j] );
}
}
else
{
mbedtls_printf( " DTLS-SRTP no mki value negotiated" );
}
mbedtls_printf( "\n" );
}
}
#endif /* MBEDTLS_SSL_DTLS_SRTP */
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
if( opt.reconnect != 0 )
{
mbedtls_printf(" . Saving session for reuse..." );
fflush( stdout );
if( opt.reco_mode == 1 )
{
/* free any previously saved data */
if( session_data != NULL )
{
mbedtls_platform_zeroize( session_data, session_data_len );
mbedtls_free( session_data );
session_data = NULL;
}
/* get size of the buffer needed */
mbedtls_ssl_session_save( mbedtls_ssl_get_session_pointer( &ssl ),
NULL, 0, &session_data_len );
session_data = mbedtls_calloc( 1, session_data_len );
if( session_data == NULL )
{
mbedtls_printf( " failed\n ! alloc %u bytes for session data\n",
(unsigned) session_data_len );
ret = MBEDTLS_ERR_SSL_ALLOC_FAILED;
goto exit;
}
/* actually save session data */
if( ( ret = mbedtls_ssl_session_save( mbedtls_ssl_get_session_pointer( &ssl ),
session_data, session_data_len,
&session_data_len ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_session_saved returned -0x%04x\n\n",
(unsigned int) -ret );
goto exit;
}
}
else
{
if( ( ret = mbedtls_ssl_get_session( &ssl, &saved_session ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_get_session returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
}
mbedtls_printf( " ok\n" );
if( opt.reco_mode == 1 )
{
mbedtls_printf( " [ Saved %u bytes of session data]\n",
(unsigned) session_data_len );
}
}
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/*
* 5. Verify the server certificate
*/
mbedtls_printf( " . Verifying peer X.509 certificate..." );
if( ( flags = mbedtls_ssl_get_verify_result( &ssl ) ) != 0 )
{
char vrfy_buf[512];
mbedtls_printf( " failed\n" );
mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ),
" ! ", flags );
mbedtls_printf( "%s\n", vrfy_buf );
}
else
mbedtls_printf( " ok\n" );
mbedtls_printf( " . Peer certificate information ...\n" );
mbedtls_printf( "%s\n", peer_crt_info );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
ret = report_cid_usage( &ssl, "initial handshake" );
if( ret != 0 )
goto exit;
if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
if( ( ret = mbedtls_ssl_set_cid( &ssl, opt.cid_enabled_renego,
cid_renego,
cid_renego_len ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_cid returned %d\n\n",
ret );
goto exit;
}
}
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
if( opt.renegotiate )
{
/*
* Perform renegotiation (this must be done when the server is waiting
* for input from our side).
*/
mbedtls_printf( " . Performing renegotiation..." );
fflush( stdout );
while( ( ret = mbedtls_ssl_renegotiate( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE &&
ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_renegotiate returned %d\n\n",
ret );
goto exit;
}
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
continue;
#endif
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
}
mbedtls_printf( " ok\n" );
}
#endif /* MBEDTLS_SSL_RENEGOTIATION */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
ret = report_cid_usage( &ssl, "after renegotiation" );
if( ret != 0 )
goto exit;
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
/*
* 6. Write the GET request
*/
retry_left = opt.max_resend;
send_request:
mbedtls_printf( " > Write to server:" );
fflush( stdout );
len = mbedtls_snprintf( (char *) buf, sizeof( buf ) - 1, GET_REQUEST,
opt.request_page );
tail_len = (int) strlen( GET_REQUEST_END );
/* Add padding to GET request to reach opt.request_size in length */
if( opt.request_size != DFL_REQUEST_SIZE &&
len + tail_len < opt.request_size )
{
memset( buf + len, 'A', opt.request_size - len - tail_len );
len += opt.request_size - len - tail_len;
}
strncpy( (char *) buf + len, GET_REQUEST_END, sizeof( buf ) - len - 1 );
len += tail_len;
/* Truncate if request size is smaller than the "natural" size */
if( opt.request_size != DFL_REQUEST_SIZE &&
len > opt.request_size )
{
len = opt.request_size;
/* Still end with \r\n unless that's really not possible */
if( len >= 2 ) buf[len - 2] = '\r';
if( len >= 1 ) buf[len - 1] = '\n';
}
if( opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM )
{
written = 0;
frags = 0;
do
{
while( ( ret = mbedtls_ssl_write( &ssl, buf + written,
len - written ) ) < 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE &&
ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
}
frags++;
written += ret;
}
while( written < len );
}
else /* Not stream, so datagram */
{
while( 1 )
{
ret = mbedtls_ssl_write( &ssl, buf, len );
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
continue;
#endif
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE )
break;
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
}
if( ret < 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n",
ret );
goto exit;
}
frags = 1;
written = ret;
if( written < len )
{
mbedtls_printf( " warning\n ! request didn't fit into single datagram and "
"was truncated to size %u", (unsigned) written );
}
}
buf[written] = '\0';
mbedtls_printf( " %d bytes written in %d fragments\n\n%s\n",
written, frags, (char *) buf );
/* Send a non-empty request if request_size == 0 */
if ( len == 0 )
{
opt.request_size = DFL_REQUEST_SIZE;
goto send_request;
}
/*
* 7. Read the HTTP response
*/
mbedtls_printf( " < Read from server:" );
fflush( stdout );
/*
* TLS and DTLS need different reading styles (stream vs datagram)
*/
if( opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM )
{
do
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
ret = mbedtls_ssl_read( &ssl, buf, len );
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
continue;
#endif
if( ret == MBEDTLS_ERR_SSL_WANT_READ ||
ret == MBEDTLS_ERR_SSL_WANT_WRITE )
{
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
continue;
}
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
case 0:
case MBEDTLS_ERR_NET_CONN_RESET:
mbedtls_printf( " connection was reset by peer\n" );
ret = 0;
goto reconnect;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n",
(unsigned int) -ret );
goto exit;
}
}
len = ret;
buf[len] = '\0';
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
/* End of message should be detected according to the syntax of the
* application protocol (eg HTTP), just use a dummy test here. */
if( ret > 0 && buf[len-1] == '\n' )
{
ret = 0;
break;
}
}
while( 1 );
}
else /* Not stream, so datagram */
{
len = sizeof( buf ) - 1;
memset( buf, 0, sizeof( buf ) );
while( 1 )
{
ret = mbedtls_ssl_read( &ssl, buf, len );
#if defined(MBEDTLS_ECP_RESTARTABLE)
if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
continue;
#endif
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE )
break;
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
}
if( ret <= 0 )
{
switch( ret )
{
case MBEDTLS_ERR_SSL_TIMEOUT:
mbedtls_printf( " timeout\n" );
if( retry_left-- > 0 )
goto send_request;
goto exit;
case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY:
mbedtls_printf( " connection was closed gracefully\n" );
ret = 0;
goto close_notify;
default:
mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n", (unsigned int) -ret );
goto exit;
}
}
len = ret;
buf[len] = '\0';
mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf );
ret = 0;
}
/*
* 7b. Simulate hard reset and reconnect from same port?
*/
if( opt.reconnect_hard != 0 )
{
opt.reconnect_hard = 0;
mbedtls_printf( " . Restarting connection from same port..." );
fflush( stdout );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
memset( peer_crt_info, 0, sizeof( peer_crt_info ) );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
if( ( ret = mbedtls_ssl_session_reset( &ssl ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_session_reset returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE &&
ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
/* For event-driven IO, wait for socket to become available */
if( opt.event == 1 /* level triggered IO */ )
{
#if defined(MBEDTLS_TIMING_C)
idle( &server_fd, &timer, ret );
#else
idle( &server_fd, ret );
#endif
}
}
mbedtls_printf( " ok\n" );
goto send_request;
}
/*
* 7c. Simulate serialize/deserialize and go back to data exchange
*/
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
if( opt.serialize != 0 )
{
size_t buf_len;
mbedtls_printf( " . Serializing live connection..." );
ret = mbedtls_ssl_context_save( &ssl, NULL, 0, &buf_len );
if( ret != MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_context_save returned "
"-0x%x\n\n", (unsigned int) -ret );
goto exit;
}
if( ( context_buf = mbedtls_calloc( 1, buf_len ) ) == NULL )
{
mbedtls_printf( " failed\n ! Couldn't allocate buffer for "
"serialized context" );
goto exit;
}
context_buf_len = buf_len;
if( ( ret = mbedtls_ssl_context_save( &ssl, context_buf,
buf_len, &buf_len ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_context_save returned "
"-0x%x\n\n", (unsigned int) -ret );
goto exit;
}
mbedtls_printf( " ok\n" );
/* Save serialized context to the 'opt.context_file' as a base64 code */
if( 0 < strlen( opt.context_file ) )
{
FILE *b64_file;
uint8_t *b64_buf;
size_t b64_len;
mbedtls_printf( " . Save serialized context to a file... " );
mbedtls_base64_encode( NULL, 0, &b64_len, context_buf, buf_len );
if( ( b64_buf = mbedtls_calloc( 1, b64_len ) ) == NULL )
{
mbedtls_printf( "failed\n ! Couldn't allocate buffer for "
"the base64 code\n" );
goto exit;
}
if( ( ret = mbedtls_base64_encode( b64_buf, b64_len, &b64_len,
context_buf, buf_len ) ) != 0 )
{
mbedtls_printf( "failed\n ! mbedtls_base64_encode returned "
"-0x%x\n", (unsigned int) -ret );
mbedtls_free( b64_buf );
goto exit;
}
if( ( b64_file = fopen( opt.context_file, "w" ) ) == NULL )
{
mbedtls_printf( "failed\n ! Cannot open '%s' for writing.\n",
opt.context_file );
mbedtls_free( b64_buf );
goto exit;
}
if( b64_len != fwrite( b64_buf, 1, b64_len, b64_file ) )
{
mbedtls_printf( "failed\n ! fwrite(%ld bytes) failed\n",
(long) b64_len );
mbedtls_free( b64_buf );
fclose( b64_file );
goto exit;
}
mbedtls_free( b64_buf );
fclose( b64_file );
mbedtls_printf( "ok\n" );
}
if( opt.serialize == 1 )
{
/* nothing to do here, done by context_save() already */
mbedtls_printf( " . Context has been reset... ok\n" );
}
if( opt.serialize == 2 )
{
mbedtls_printf( " . Freeing and reinitializing context..." );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_init( &ssl );
if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned "
"-0x%x\n\n", (unsigned int) -ret );
goto exit;
}
if( opt.nbio == 2 )
mbedtls_ssl_set_bio( &ssl, &server_fd, delayed_send,
delayed_recv, NULL );
else
mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send,
mbedtls_net_recv,
opt.nbio == 0 ? mbedtls_net_recv_timeout : NULL );
#if defined(MBEDTLS_TIMING_C)
mbedtls_ssl_set_timer_cb( &ssl, &timer,
mbedtls_timing_set_delay,
mbedtls_timing_get_delay );
#endif /* MBEDTLS_TIMING_C */
mbedtls_printf( " ok\n" );
}
mbedtls_printf( " . Deserializing connection..." );
if( ( ret = mbedtls_ssl_context_load( &ssl, context_buf,
buf_len ) ) != 0 )
{
mbedtls_printf( "failed\n ! mbedtls_ssl_context_load returned "
"-0x%x\n\n", (unsigned int) -ret );
goto exit;
}
mbedtls_free( context_buf );
context_buf = NULL;
context_buf_len = 0;
mbedtls_printf( " ok\n" );
}
#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
/*
* 7d. Continue doing data exchanges?
*/
if( --opt.exchanges > 0 )
goto send_request;
/*
* 8. Done, cleanly close the connection
*/
close_notify:
mbedtls_printf( " . Closing the connection..." );
fflush( stdout );
/*
* Most of the time sending a close_notify before closing is the right
* thing to do. However, when the server already knows how many messages
* are expected and closes the connection by itself, this alert becomes
* redundant. Sometimes with DTLS this redundancy becomes a problem by
* leading to a race condition where the server might close the connection
* before seeing the alert, and since UDP is connection-less when the
* alert arrives it will be seen as a new connection, which will fail as
* the alert is clearly not a valid ClientHello. This may cause spurious
* failures in tests that use DTLS and resumption with ssl_server2 in
* ssl-opt.sh, avoided by enabling skip_close_notify client-side.
*/
if( opt.skip_close_notify == 0 )
{
/* No error checking, the connection might be closed already */
do ret = mbedtls_ssl_close_notify( &ssl );
while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
ret = 0;
}
mbedtls_printf( " done\n" );
/*
* 9. Reconnect?
*/
reconnect:
if( opt.reconnect != 0 )
{
--opt.reconnect;
mbedtls_net_free( &server_fd );
#if defined(MBEDTLS_TIMING_C)
if( opt.reco_delay > 0 )
mbedtls_net_usleep( 1000000 * opt.reco_delay );
#endif
mbedtls_printf( " . Reconnecting with saved session..." );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
memset( peer_crt_info, 0, sizeof( peer_crt_info ) );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
if( ( ret = mbedtls_ssl_session_reset( &ssl ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_session_reset returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
if( opt.reco_mode == 1 )
{
if( ( ret = mbedtls_ssl_session_load( &saved_session,
session_data,
session_data_len ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_session_load returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
}
if( ( ret = mbedtls_ssl_set_session( &ssl, &saved_session ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_set_session returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
if( ( ret = mbedtls_net_connect( &server_fd,
opt.server_addr, opt.server_port,
opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ?
MBEDTLS_NET_PROTO_TCP : MBEDTLS_NET_PROTO_UDP ) ) != 0 )
{
mbedtls_printf( " failed\n ! mbedtls_net_connect returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
if( opt.nbio > 0 )
ret = mbedtls_net_set_nonblock( &server_fd );
else
ret = mbedtls_net_set_block( &server_fd );
if( ret != 0 )
{
mbedtls_printf( " failed\n ! net_set_(non)block() returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 )
{
if( ret != MBEDTLS_ERR_SSL_WANT_READ &&
ret != MBEDTLS_ERR_SSL_WANT_WRITE &&
ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS )
{
mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n",
(unsigned int) -ret );
goto exit;
}
}
mbedtls_printf( " ok\n" );
goto send_request;
}
/*
* Cleanup and exit
*/
exit:
#ifdef MBEDTLS_ERROR_C
if( ret != 0 )
{
char error_buf[100];
mbedtls_strerror( ret, error_buf, 100 );
mbedtls_printf("Last error was: -0x%X - %s\n\n", (unsigned int) -ret, error_buf );
}
#endif
mbedtls_net_free( &server_fd );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_crt_free( &clicert );
mbedtls_x509_crt_free( &cacert );
mbedtls_pk_free( &pkey );
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_destroy_key( key_slot );
#endif
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) && \
defined(MBEDTLS_USE_PSA_CRYPTO)
if( opt.psk_opaque != 0 )
{
/* This is ok even if the slot hasn't been
* initialized (we might have jumed here
* immediately because of bad cmd line params,
* for example). */
status = psa_destroy_key( slot );
if( ( status != PSA_SUCCESS ) &&
( opt.query_config_mode == DFL_QUERY_CONFIG_MODE ) )
{
mbedtls_printf( "Failed to destroy key slot %u - error was %d",
(unsigned) slot, (int) status );
if( ret == 0 )
ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED;
}
}
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED &&
MBEDTLS_USE_PSA_CRYPTO */
mbedtls_ssl_session_free( &saved_session );
mbedtls_ssl_free( &ssl );
mbedtls_ssl_config_free( &conf );
rng_free( &rng );
if( session_data != NULL )
mbedtls_platform_zeroize( session_data, session_data_len );
mbedtls_free( session_data );
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
if( context_buf != NULL )
mbedtls_platform_zeroize( context_buf, context_buf_len );
mbedtls_free( context_buf );
#endif
#if defined(MBEDTLS_USE_PSA_CRYPTO)
mbedtls_psa_crypto_free( );
#endif
#if defined(MBEDTLS_TEST_HOOKS)
if( test_hooks_failure_detected( ) )
{
if( ret == 0 )
ret = 1;
mbedtls_printf( "Test hooks detected errors.\n" );
}
test_hooks_free( );
#endif /* MBEDTLS_TEST_HOOKS */
#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
#if defined(MBEDTLS_MEMORY_DEBUG)
mbedtls_memory_buffer_alloc_status();
#endif
mbedtls_memory_buffer_alloc_free();
#endif /* MBEDTLS_MEMORY_BUFFER_ALLOC_C */
#if defined(_WIN32)
if( opt.query_config_mode == DFL_QUERY_CONFIG_MODE )
{
mbedtls_printf( " + Press Enter to exit this program.\n" );
fflush( stdout ); getchar();
}
#endif
// Shell can not handle large exit numbers -> 1 for errors
if( ret < 0 )
ret = 1;
if( opt.query_config_mode == DFL_QUERY_CONFIG_MODE )