tree: 0ba49c252a4842cc06b1df55052bc096ee17db92 [path history] [tgz]
  1. main.cpp

SHA-256 Hash Example

This application performs hashing of a buffer with SHA-256 using various APIs. It serves as a tutorial for the basic hashing APIs of mbed TLS.


To build and run this example you must have:

  • A computer with the following software installed:
  • An FRDM-K64F development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below).
  • A micro-USB cable.
  • If your OS is Windows, please follow the installation instructions for the serial port driver.

Getting started

  1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the “OpenSDA” connector on the target board.

  2. Navigate to the mbedtls directory supplied with your release and open a terminal.

  3. Set the yotta target:

    yotta target frdm-k64f-gcc
  4. Build mbedtls and the examples. This may take a long time if this is your first compilation:

    $ yotta build
  5. Copy build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin to your mbed board and wait until the LED next to the USB port stops blinking.

  6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F.

    Use the following settings:

    • 115200 baud (not 9600).
    • 8N1.
    • No flow control.
  7. Press the Reset button on the board.

  8. The output in the terminal window should look like:

    {{description;mbed TLS example on hashing}}
    Method 1: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
    Method 2: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
    Method 3: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3
    Method 4: 315f5bdb76d078c43b8ac0064e4a0164612b1fce77c869345bfc94c75894edd3