#!/bin/sh

# Test various options that are not covered by compat.sh
#
# Here the goal is not to cover every ciphersuite/version, but
# rather specific options (max fragment length, truncated hmac, etc)
# or procedures (session resumption from cache or ticket, renego, etc).
#
# Assumes a build with default options.

set -u

# default values, can be overriden by the environment
: ${P_SRV:=../programs/ssl/ssl_server2}
: ${P_CLI:=../programs/ssl/ssl_client2}
: ${P_PXY:=../programs/test/udp_proxy}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
: ${GNUTLS_CLI:=gnutls-cli}
: ${GNUTLS_SERV:=gnutls-serv}

O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client"
G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt"

TESTS=0
FAILS=0
SKIPS=0

CONFIG_H='../include/mbedtls/config.h'

MEMCHECK=0
FILTER='.*'
EXCLUDE='^$'

print_usage() {
    echo "Usage: $0 [options]"
    printf "  -h|--help\tPrint this help.\n"
    printf "  -m|--memcheck\tCheck memory leaks and errors.\n"
    printf "  -f|--filter\tOnly matching tests are executed (default: '$FILTER')\n"
    printf "  -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')\n"
}

get_options() {
    while [ $# -gt 0 ]; do
        case "$1" in
            -f|--filter)
                shift; FILTER=$1
                ;;
            -e|--exclude)
                shift; EXCLUDE=$1
                ;;
            -m|--memcheck)
                MEMCHECK=1
                ;;
            -h|--help)
                print_usage
                exit 0
                ;;
            *)
                echo "Unknown argument: '$1'"
                print_usage
                exit 1
                ;;
        esac
        shift
    done
}

# skip next test if OpenSSL can't send SSLv2 ClientHello
requires_openssl_with_sslv2() {
    if [ -z "${OPENSSL_HAS_SSL2:-}" ]; then
        if $OPENSSL_CMD ciphers -ssl2 >/dev/null 2>&1; then
            OPENSSL_HAS_SSL2="YES"
        else
            OPENSSL_HAS_SSL2="NO"
        fi
    fi

    if [ "$OPENSSL_HAS_SSL2" = "NO" ]; then
        SKIP_NEXT="YES"
    fi
}

# skip next test if OpenSSL doesn't support FALLBACK_SCSV
requires_openssl_with_fallback_scsv() {
    if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then
        if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null
        then
            OPENSSL_HAS_FBSCSV="YES"
        else
            OPENSSL_HAS_FBSCSV="NO"
        fi
    fi
    if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then
        SKIP_NEXT="YES"
    fi
}

# skip next test if GnuTLS isn't available
requires_gnutls() {
    if [ -z "${GNUTLS_AVAILABLE:-}" ]; then
        if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null; then
            GNUTLS_AVAILABLE="YES"
        else
            GNUTLS_AVAILABLE="NO"
        fi
    fi
    if [ "$GNUTLS_AVAILABLE" = "NO" ]; then
        SKIP_NEXT="YES"
    fi
}

# skip next test if IPv6 isn't available on this host
requires_ipv6() {
    if [ -z "${HAS_IPV6:-}" ]; then
        $P_SRV server_addr='::1' > $SRV_OUT 2>&1 &
        SRV_PID=$!
        sleep 1
        kill $SRV_PID >/dev/null 2>&1
        if grep "NET - Binding of the socket failed" $SRV_OUT >/dev/null; then
            HAS_IPV6="NO"
        else
            HAS_IPV6="YES"
        fi
        rm -r $SRV_OUT
    fi

    if [ "$HAS_IPV6" = "NO" ]; then
        SKIP_NEXT="YES"
    fi
}

# skip the next test if valgrind is in use
not_with_valgrind() {
    if [ "$MEMCHECK" -gt 0 ]; then
        SKIP_NEXT="YES"
    fi
}

# multiply the client timeout delay by the given factor for the next test
needs_more_time() {
    CLI_DELAY_FACTOR=$1
}

# print_name <name>
print_name() {
    printf "$1 "
    LEN=$(( 72 - `echo "$1" | wc -c` ))
    for i in `seq 1 $LEN`; do printf '.'; done
    printf ' '

    TESTS=$(( $TESTS + 1 ))
}

# fail <message>
fail() {
    echo "FAIL"
    echo "  ! $1"

    mv $SRV_OUT o-srv-${TESTS}.log
    mv $CLI_OUT o-cli-${TESTS}.log
    if [ -n "$PXY_CMD" ]; then
        mv $PXY_OUT o-pxy-${TESTS}.log
    fi
    echo "  ! outputs saved to o-XXX-${TESTS}.log"

    if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot ]; then
        echo "  ! server output:"
        cat o-srv-${TESTS}.log
        echo "  ! ========================================================"
        echo "  ! client output:"
        cat o-cli-${TESTS}.log
        if [ -n "$PXY_CMD" ]; then
            echo "  ! ========================================================"
            echo "  ! proxy output:"
            cat o-pxy-${TESTS}.log
        fi
        echo ""
    fi

    FAILS=$(( $FAILS + 1 ))
}

# is_polar <cmd_line>
is_polar() {
    echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}

# openssl s_server doesn't have -www with DTLS
check_osrv_dtls() {
    if echo "$SRV_CMD" | grep 's_server.*-dtls' >/dev/null; then
        NEEDS_INPUT=1
        SRV_CMD="$( echo $SRV_CMD | sed s/-www// )"
    else
        NEEDS_INPUT=0
    fi
}

# provide input to commands that need it
provide_input() {
    if [ $NEEDS_INPUT -eq 0 ]; then
        return
    fi

    while true; do
        echo "HTTP/1.0 200 OK"
        sleep 1
    done
}

# has_mem_err <log_file_name>
has_mem_err() {
    if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
         grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
    then
        return 1 # false: does not have errors
    else
        return 0 # true: has errors
    fi
}

# wait for server to start: two versions depending on lsof availability
wait_server_start() {
    if which lsof >/dev/null; then
        # make sure we don't loop forever
        ( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) &
        DOG_PID=$!

        # make a tight loop, server usually takes less than 1 sec to start
        if [ "$DTLS" -eq 1 ]; then
            until lsof -nbi UDP:"$SRV_PORT" 2>/dev/null | grep UDP >/dev/null;
            do :; done
        else
            until lsof -nbi TCP:"$SRV_PORT" 2>/dev/null | grep LISTEN >/dev/null;
            do :; done
        fi

        kill $DOG_PID >/dev/null 2>&1
        wait $DOG_PID
    else
        sleep "$START_DELAY"
    fi
}

# wait for client to terminate and set CLI_EXIT
# must be called right after starting the client
wait_client_done() {
    CLI_PID=$!

    CLI_DELAY=$(( $DOG_DELAY * $CLI_DELAY_FACTOR ))
    CLI_DELAY_FACTOR=1

    ( sleep $CLI_DELAY; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) &
    DOG_PID=$!

    wait $CLI_PID
    CLI_EXIT=$?

    kill $DOG_PID >/dev/null 2>&1
    wait $DOG_PID

    echo "EXIT: $CLI_EXIT" >> $CLI_OUT
}

# check if the given command uses dtls and sets global variable DTLS
detect_dtls() {
    if echo "$1" | grep 'dtls=1\|-dtls1\|-u' >/dev/null; then
        DTLS=1
    else
        DTLS=0
    fi
}

# Usage: run_test name [-p proxy_cmd] srv_cmd cli_cmd cli_exit [option [...]]
# Options:  -s pattern  pattern that must be present in server output
#           -c pattern  pattern that must be present in client output
#           -S pattern  pattern that must be absent in server output
#           -C pattern  pattern that must be absent in client output
run_test() {
    NAME="$1"
    shift 1

    if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then :
    else
        SKIP_NEXT="NO"
        return
    fi

    print_name "$NAME"

    # should we skip?
    if [ "X$SKIP_NEXT" = "XYES" ]; then
        SKIP_NEXT="NO"
        echo "SKIP"
        SKIPS=$(( $SKIPS + 1 ))
        return
    fi

    # does this test use a proxy?
    if [ "X$1" = "X-p" ]; then
        PXY_CMD="$2"
        shift 2
    else
        PXY_CMD=""
    fi

    # get commands and client output
    SRV_CMD="$1"
    CLI_CMD="$2"
    CLI_EXPECT="$3"
    shift 3

    # fix client port
    if [ -n "$PXY_CMD" ]; then
        CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$PXY_PORT/g )
    else
        CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$SRV_PORT/g )
    fi

    # update DTLS variable
    detect_dtls "$SRV_CMD"

    # prepend valgrind to our commands if active
    if [ "$MEMCHECK" -gt 0 ]; then
        if is_polar "$SRV_CMD"; then
            SRV_CMD="valgrind --leak-check=full $SRV_CMD"
        fi
        if is_polar "$CLI_CMD"; then
            CLI_CMD="valgrind --leak-check=full $CLI_CMD"
        fi
    fi

    # run the commands
    if [ -n "$PXY_CMD" ]; then
        echo "$PXY_CMD" > $PXY_OUT
        $PXY_CMD >> $PXY_OUT 2>&1 &
        PXY_PID=$!
        # assume proxy starts faster than server
    fi

    check_osrv_dtls
    echo "$SRV_CMD" > $SRV_OUT
    provide_input | $SRV_CMD >> $SRV_OUT 2>&1 &
    SRV_PID=$!
    wait_server_start

    echo "$CLI_CMD" > $CLI_OUT
    eval "$CLI_CMD" >> $CLI_OUT 2>&1 &
    wait_client_done

    # terminate the server (and the proxy)
    kill $SRV_PID
    wait $SRV_PID
    if [ -n "$PXY_CMD" ]; then
        kill $PXY_PID >/dev/null 2>&1
        wait $PXY_PID
    fi

    # check if the client and server went at least to the handshake stage
    # (useful to avoid tests with only negative assertions and non-zero
    # expected client exit to incorrectly succeed in case of catastrophic
    # failure)
    if is_polar "$SRV_CMD"; then
        if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :;
        else
            fail "server or client failed to reach handshake stage"
            return
        fi
    fi
    if is_polar "$CLI_CMD"; then
        if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :;
        else
            fail "server or client failed to reach handshake stage"
            return
        fi
    fi

    # check server exit code
    if [ $? != 0 ]; then
        fail "server fail"
        return
    fi

    # check client exit code
    if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \
         \( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ]
    then
        fail "bad client exit code (expected $CLI_EXPECT, got $CLI_EXIT)"
        return
    fi

    # check other assertions
    # lines beginning with == are added by valgrind, ignore them
    while [ $# -gt 0 ]
    do
        case $1 in
            "-s")
                if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then :; else
                    fail "-s $2"
                    return
                fi
                ;;

            "-c")
                if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then :; else
                    fail "-c $2"
                    return
                fi
                ;;

            "-S")
                if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then
                    fail "-S $2"
                    return
                fi
                ;;

            "-C")
                if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then
                    fail "-C $2"
                    return
                fi
                ;;

            *)
                echo "Unknown test: $1" >&2
                exit 1
        esac
        shift 2
    done

    # check valgrind's results
    if [ "$MEMCHECK" -gt 0 ]; then
        if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then
            fail "Server has memory errors"
            return
        fi
        if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then
            fail "Client has memory errors"
            return
        fi
    fi

    # if we're here, everything is ok
    echo "PASS"
    rm -f $SRV_OUT $CLI_OUT $PXY_OUT
}

cleanup() {
    rm -f $CLI_OUT $SRV_OUT $PXY_OUT $SESSION
    test -n "${SRV_PID:-}" && kill $SRV_PID >/dev/null 2>&1
    test -n "${PXY_PID:-}" && kill $PXY_PID >/dev/null 2>&1
    test -n "${CLI_PID:-}" && kill $CLI_PID >/dev/null 2>&1
    test -n "${DOG_PID:-}" && kill $DOG_PID >/dev/null 2>&1
    exit 1
}

#
# MAIN
#

get_options "$@"

# sanity checks, avoid an avalanche of errors
if [ ! -x "$P_SRV" ]; then
    echo "Command '$P_SRV' is not an executable file"
    exit 1
fi
if [ ! -x "$P_CLI" ]; then
    echo "Command '$P_CLI' is not an executable file"
    exit 1
fi
if [ ! -x "$P_PXY" ]; then
    echo "Command '$P_PXY' is not an executable file"
    exit 1
fi
if which $OPENSSL_CMD >/dev/null 2>&1; then :; else
    echo "Command '$OPENSSL_CMD' not found"
    exit 1
fi

# used by watchdog
MAIN_PID="$$"

# be more patient with valgrind
if [ "$MEMCHECK" -gt 0 ]; then
    START_DELAY=3
    DOG_DELAY=30
else
    START_DELAY=1
    DOG_DELAY=10
fi
CLI_DELAY_FACTOR=1

# Pick a "unique" server port in the range 10000-19999, and a proxy port
PORT_BASE="0000$$"
PORT_BASE="$( printf $PORT_BASE | tail -c 4 )"
SRV_PORT="1$PORT_BASE"
PXY_PORT="2$PORT_BASE"
unset PORT_BASE

# fix commands to use this port, force IPv4 while at it
# +SRV_PORT will be replaced by either $SRV_PORT or $PXY_PORT later
P_SRV="$P_SRV server_addr=127.0.0.1 server_port=$SRV_PORT"
P_CLI="$P_CLI server_addr=127.0.0.1 server_port=+SRV_PORT"
P_PXY="$P_PXY server_addr=127.0.0.1 server_port=$SRV_PORT listen_addr=127.0.0.1 listen_port=$PXY_PORT"
O_SRV="$O_SRV -accept $SRV_PORT"
O_CLI="$O_CLI -connect localhost:+SRV_PORT"
G_SRV="$G_SRV -p $SRV_PORT"
G_CLI="$G_CLI -p +SRV_PORT localhost"

# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
PXY_OUT="pxy_out.$$"
SESSION="session.$$"

SKIP_NEXT="NO"

trap cleanup INT TERM HUP

# Basic test

# Checks that:
# - things work with all ciphersuites active (used with config-full in all.sh)
# - the expected (highest security) parameters are selected
#   ("signature_algorithm ext: 6" means SHA-512 (highest common hash))
run_test    "Default" \
            "$P_SRV debug_level=3" \
            "$P_CLI" \
            0 \
            -s "Protocol is TLSv1.2" \
            -s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
            -s "client hello v3, signature_algorithm ext: 6" \
            -s "ECDHE curve: secp521r1" \
            -S "error" \
            -C "error"

run_test    "Default, DTLS" \
            "$P_SRV dtls=1" \
            "$P_CLI dtls=1" \
            0 \
            -s "Protocol is DTLSv1.2" \
            -s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384"

# Tests for rc4 option

run_test    "RC4: server disabled, client enabled" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            1 \
            -s "SSL - None of the common ciphersuites is usable"

run_test    "RC4: server enabled, client disabled" \
            "$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            "$P_CLI" \
            1 \
            -s "SSL - The server has no ciphersuites in common"

run_test    "RC4: both enabled" \
            "$P_SRV arc4=1" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -S "SSL - None of the common ciphersuites is usable" \
            -S "SSL - The server has no ciphersuites in common"

# Test for SSLv2 ClientHello

requires_openssl_with_sslv2
run_test    "SSLv2 ClientHello: reference" \
            "$P_SRV debug_level=3" \
            "$O_CLI -no_ssl2" \
            0 \
            -S "parse client hello v2" \
            -S "ssl_handshake returned"

# Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello
requires_openssl_with_sslv2
run_test    "SSLv2 ClientHello: actual test" \
            "$P_SRV debug_level=2" \
            "$O_CLI -cipher 'DES-CBC-MD5:ALL'" \
            0 \
            -s "parse client hello v2" \
            -S "ssl_handshake returned"

# Tests for Truncated HMAC extension

run_test    "Truncated HMAC: client default, server default" \
            "$P_SRV debug_level=4" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -s "dumping 'computed mac' (20 bytes)" \
            -S "dumping 'computed mac' (10 bytes)"

run_test    "Truncated HMAC: client disabled, server default" \
            "$P_SRV debug_level=4" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             trunc_hmac=0" \
            0 \
            -s "dumping 'computed mac' (20 bytes)" \
            -S "dumping 'computed mac' (10 bytes)"

run_test    "Truncated HMAC: client enabled, server default" \
            "$P_SRV debug_level=4" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -S "dumping 'computed mac' (20 bytes)" \
            -s "dumping 'computed mac' (10 bytes)"

run_test    "Truncated HMAC: client enabled, server disabled" \
            "$P_SRV debug_level=4 trunc_hmac=0" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "dumping 'computed mac' (20 bytes)" \
            -S "dumping 'computed mac' (10 bytes)"

run_test    "Truncated HMAC: client enabled, server enabled" \
            "$P_SRV debug_level=4 trunc_hmac=1" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -S "dumping 'computed mac' (20 bytes)" \
            -s "dumping 'computed mac' (10 bytes)"

# Tests for Encrypt-then-MAC extension

run_test    "Encrypt then MAC: default" \
            "$P_SRV debug_level=3 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            "$P_CLI debug_level=3" \
            0 \
            -c "client hello, adding encrypt_then_mac extension" \
            -s "found encrypt then mac extension" \
            -s "server hello, adding encrypt then mac extension" \
            -c "found encrypt_then_mac extension" \
            -c "using encrypt then mac" \
            -s "using encrypt then mac"

run_test    "Encrypt then MAC: client enabled, server disabled" \
            "$P_SRV debug_level=3 etm=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            "$P_CLI debug_level=3 etm=1" \
            0 \
            -c "client hello, adding encrypt_then_mac extension" \
            -s "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

run_test    "Encrypt then MAC: client enabled, aead cipher" \
            "$P_SRV debug_level=3 etm=1 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \
            "$P_CLI debug_level=3 etm=1" \
            0 \
            -c "client hello, adding encrypt_then_mac extension" \
            -s "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

run_test    "Encrypt then MAC: client enabled, stream cipher" \
            "$P_SRV debug_level=3 etm=1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            "$P_CLI debug_level=3 etm=1 arc4=1" \
            0 \
            -c "client hello, adding encrypt_then_mac extension" \
            -s "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

run_test    "Encrypt then MAC: client disabled, server enabled" \
            "$P_SRV debug_level=3 etm=1 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            "$P_CLI debug_level=3 etm=0" \
            0 \
            -C "client hello, adding encrypt_then_mac extension" \
            -S "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

run_test    "Encrypt then MAC: client SSLv3, server enabled" \
            "$P_SRV debug_level=3 min_version=ssl3 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            "$P_CLI debug_level=3 force_version=ssl3" \
            0 \
            -C "client hello, adding encrypt_then_mac extension" \
            -S "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

run_test    "Encrypt then MAC: client enabled, server SSLv3" \
            "$P_SRV debug_level=3 force_version=ssl3 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            "$P_CLI debug_level=3 min_version=ssl3" \
            0 \
            -c "client hello, adding encrypt_then_mac extension" \
            -s "found encrypt then mac extension" \
            -S "server hello, adding encrypt then mac extension" \
            -C "found encrypt_then_mac extension" \
            -C "using encrypt then mac" \
            -S "using encrypt then mac"

# Tests for Extended Master Secret extension

run_test    "Extended Master Secret: default" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3" \
            0 \
            -c "client hello, adding extended_master_secret extension" \
            -s "found extended master secret extension" \
            -s "server hello, adding extended master secret extension" \
            -c "found extended_master_secret extension" \
            -c "using extended master secret" \
            -s "using extended master secret"

run_test    "Extended Master Secret: client enabled, server disabled" \
            "$P_SRV debug_level=3 extended_ms=0" \
            "$P_CLI debug_level=3 extended_ms=1" \
            0 \
            -c "client hello, adding extended_master_secret extension" \
            -s "found extended master secret extension" \
            -S "server hello, adding extended master secret extension" \
            -C "found extended_master_secret extension" \
            -C "using extended master secret" \
            -S "using extended master secret"

run_test    "Extended Master Secret: client disabled, server enabled" \
            "$P_SRV debug_level=3 extended_ms=1" \
            "$P_CLI debug_level=3 extended_ms=0" \
            0 \
            -C "client hello, adding extended_master_secret extension" \
            -S "found extended master secret extension" \
            -S "server hello, adding extended master secret extension" \
            -C "found extended_master_secret extension" \
            -C "using extended master secret" \
            -S "using extended master secret"

run_test    "Extended Master Secret: client SSLv3, server enabled" \
            "$P_SRV debug_level=3 min_version=ssl3" \
            "$P_CLI debug_level=3 force_version=ssl3" \
            0 \
            -C "client hello, adding extended_master_secret extension" \
            -S "found extended master secret extension" \
            -S "server hello, adding extended master secret extension" \
            -C "found extended_master_secret extension" \
            -C "using extended master secret" \
            -S "using extended master secret"

run_test    "Extended Master Secret: client enabled, server SSLv3" \
            "$P_SRV debug_level=3 force_version=ssl3" \
            "$P_CLI debug_level=3 min_version=ssl3" \
            0 \
            -c "client hello, adding extended_master_secret extension" \
            -s "found extended master secret extension" \
            -S "server hello, adding extended master secret extension" \
            -C "found extended_master_secret extension" \
            -C "using extended master secret" \
            -S "using extended master secret"

# Tests for FALLBACK_SCSV

run_test    "Fallback SCSV: default" \
            "$P_SRV" \
            "$P_CLI debug_level=3 force_version=tls1_1" \
            0 \
            -C "adding FALLBACK_SCSV" \
            -S "received FALLBACK_SCSV" \
            -S "inapropriate fallback" \
            -C "is a fatal alert message (msg 86)"

run_test    "Fallback SCSV: explicitly disabled" \
            "$P_SRV" \
            "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
            0 \
            -C "adding FALLBACK_SCSV" \
            -S "received FALLBACK_SCSV" \
            -S "inapropriate fallback" \
            -C "is a fatal alert message (msg 86)"

run_test    "Fallback SCSV: enabled" \
            "$P_SRV" \
            "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
            1 \
            -c "adding FALLBACK_SCSV" \
            -s "received FALLBACK_SCSV" \
            -s "inapropriate fallback" \
            -c "is a fatal alert message (msg 86)"

run_test    "Fallback SCSV: enabled, max version" \
            "$P_SRV" \
            "$P_CLI debug_level=3 fallback=1" \
            0 \
            -c "adding FALLBACK_SCSV" \
            -s "received FALLBACK_SCSV" \
            -S "inapropriate fallback" \
            -C "is a fatal alert message (msg 86)"

requires_openssl_with_fallback_scsv
run_test    "Fallback SCSV: default, openssl server" \
            "$O_SRV" \
            "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
            0 \
            -C "adding FALLBACK_SCSV" \
            -C "is a fatal alert message (msg 86)"

requires_openssl_with_fallback_scsv
run_test    "Fallback SCSV: enabled, openssl server" \
            "$O_SRV" \
            "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
            1 \
            -c "adding FALLBACK_SCSV" \
            -c "is a fatal alert message (msg 86)"

requires_openssl_with_fallback_scsv
run_test    "Fallback SCSV: disabled, openssl client" \
            "$P_SRV" \
            "$O_CLI -tls1_1" \
            0 \
            -S "received FALLBACK_SCSV" \
            -S "inapropriate fallback"

requires_openssl_with_fallback_scsv
run_test    "Fallback SCSV: enabled, openssl client" \
            "$P_SRV" \
            "$O_CLI -tls1_1 -fallback_scsv" \
            1 \
            -s "received FALLBACK_SCSV" \
            -s "inapropriate fallback"

requires_openssl_with_fallback_scsv
run_test    "Fallback SCSV: enabled, max version, openssl client" \
            "$P_SRV" \
            "$O_CLI -fallback_scsv" \
            0 \
            -s "received FALLBACK_SCSV" \
            -S "inapropriate fallback"

# Tests for CBC 1/n-1 record splitting

run_test    "CBC Record splitting: TLS 1.2, no splitting" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=tls1_2" \
            0 \
            -s "Read from client: 123 bytes read" \
            -S "Read from client: 1 bytes read" \
            -S "122 bytes read"

run_test    "CBC Record splitting: TLS 1.1, no splitting" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=tls1_1" \
            0 \
            -s "Read from client: 123 bytes read" \
            -S "Read from client: 1 bytes read" \
            -S "122 bytes read"

run_test    "CBC Record splitting: TLS 1.0, splitting" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=tls1" \
            0 \
            -S "Read from client: 123 bytes read" \
            -s "Read from client: 1 bytes read" \
            -s "122 bytes read"

run_test    "CBC Record splitting: SSLv3, splitting" \
            "$P_SRV min_version=ssl3" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=ssl3" \
            0 \
            -S "Read from client: 123 bytes read" \
            -s "Read from client: 1 bytes read" \
            -s "122 bytes read"

run_test    "CBC Record splitting: TLS 1.0 RC4, no splitting" \
            "$P_SRV arc4=1" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             request_size=123 force_version=tls1" \
            0 \
            -s "Read from client: 123 bytes read" \
            -S "Read from client: 1 bytes read" \
            -S "122 bytes read"

run_test    "CBC Record splitting: TLS 1.0, splitting disabled" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=tls1 recsplit=0" \
            0 \
            -s "Read from client: 123 bytes read" \
            -S "Read from client: 1 bytes read" \
            -S "122 bytes read"

run_test    "CBC Record splitting: TLS 1.0, splitting, nbio" \
            "$P_SRV nbio=2" \
            "$P_CLI nbio=2 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
             request_size=123 force_version=tls1" \
            0 \
            -S "Read from client: 123 bytes read" \
            -s "Read from client: 1 bytes read" \
            -s "122 bytes read"

# Tests for Session Tickets

run_test    "Session resume using tickets: basic" \
            "$P_SRV debug_level=3 tickets=1" \
            "$P_CLI debug_level=3 tickets=1 reconnect=1" \
            0 \
            -c "client hello, adding session ticket extension" \
            -s "found session ticket extension" \
            -s "server hello, adding session ticket extension" \
            -c "found session_ticket extension" \
            -c "parse new session ticket" \
            -S "session successfully restored from cache" \
            -s "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using tickets: cache disabled" \
            "$P_SRV debug_level=3 tickets=1 cache_max=0" \
            "$P_CLI debug_level=3 tickets=1 reconnect=1" \
            0 \
            -c "client hello, adding session ticket extension" \
            -s "found session ticket extension" \
            -s "server hello, adding session ticket extension" \
            -c "found session_ticket extension" \
            -c "parse new session ticket" \
            -S "session successfully restored from cache" \
            -s "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using tickets: timeout" \
            "$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \
            "$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \
            0 \
            -c "client hello, adding session ticket extension" \
            -s "found session ticket extension" \
            -s "server hello, adding session ticket extension" \
            -c "found session_ticket extension" \
            -c "parse new session ticket" \
            -S "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -S "a session has been resumed" \
            -C "a session has been resumed"

run_test    "Session resume using tickets: openssl server" \
            "$O_SRV" \
            "$P_CLI debug_level=3 tickets=1 reconnect=1" \
            0 \
            -c "client hello, adding session ticket extension" \
            -c "found session_ticket extension" \
            -c "parse new session ticket" \
            -c "a session has been resumed"

run_test    "Session resume using tickets: openssl client" \
            "$P_SRV debug_level=3 tickets=1" \
            "( $O_CLI -sess_out $SESSION; \
               $O_CLI -sess_in $SESSION; \
               rm -f $SESSION )" \
            0 \
            -s "found session ticket extension" \
            -s "server hello, adding session ticket extension" \
            -S "session successfully restored from cache" \
            -s "session successfully restored from ticket" \
            -s "a session has been resumed"

# Tests for Session Resume based on session-ID and cache

run_test    "Session resume using cache: tickets enabled on client" \
            "$P_SRV debug_level=3 tickets=0" \
            "$P_CLI debug_level=3 tickets=1 reconnect=1" \
            0 \
            -c "client hello, adding session ticket extension" \
            -s "found session ticket extension" \
            -S "server hello, adding session ticket extension" \
            -C "found session_ticket extension" \
            -C "parse new session ticket" \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using cache: tickets enabled on server" \
            "$P_SRV debug_level=3 tickets=1" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1" \
            0 \
            -C "client hello, adding session ticket extension" \
            -S "found session ticket extension" \
            -S "server hello, adding session ticket extension" \
            -C "found session_ticket extension" \
            -C "parse new session ticket" \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using cache: cache_max=0" \
            "$P_SRV debug_level=3 tickets=0 cache_max=0" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1" \
            0 \
            -S "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -S "a session has been resumed" \
            -C "a session has been resumed"

run_test    "Session resume using cache: cache_max=1" \
            "$P_SRV debug_level=3 tickets=0 cache_max=1" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1" \
            0 \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using cache: timemout > delay" \
            "$P_SRV debug_level=3 tickets=0" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
            0 \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using cache: timeout < delay" \
            "$P_SRV debug_level=3 tickets=0 cache_timeout=1" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
            0 \
            -S "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -S "a session has been resumed" \
            -C "a session has been resumed"

run_test    "Session resume using cache: no timeout" \
            "$P_SRV debug_level=3 tickets=0 cache_timeout=0" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
            0 \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed" \
            -c "a session has been resumed"

run_test    "Session resume using cache: openssl client" \
            "$P_SRV debug_level=3 tickets=0" \
            "( $O_CLI -sess_out $SESSION; \
               $O_CLI -sess_in $SESSION; \
               rm -f $SESSION )" \
            0 \
            -s "found session ticket extension" \
            -S "server hello, adding session ticket extension" \
            -s "session successfully restored from cache" \
            -S "session successfully restored from ticket" \
            -s "a session has been resumed"

run_test    "Session resume using cache: openssl server" \
            "$O_SRV" \
            "$P_CLI debug_level=3 tickets=0 reconnect=1" \
            0 \
            -C "found session_ticket extension" \
            -C "parse new session ticket" \
            -c "a session has been resumed"

# Tests for Max Fragment Length extension

run_test    "Max fragment length: not used, reference" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3" \
            0 \
            -C "client hello, adding max_fragment_length extension" \
            -S "found max fragment length extension" \
            -S "server hello, max_fragment_length extension" \
            -C "found max_fragment_length extension"

run_test    "Max fragment length: used by client" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3 max_frag_len=4096" \
            0 \
            -c "client hello, adding max_fragment_length extension" \
            -s "found max fragment length extension" \
            -s "server hello, max_fragment_length extension" \
            -c "found max_fragment_length extension"

run_test    "Max fragment length: used by server" \
            "$P_SRV debug_level=3 max_frag_len=4096" \
            "$P_CLI debug_level=3" \
            0 \
            -C "client hello, adding max_fragment_length extension" \
            -S "found max fragment length extension" \
            -S "server hello, max_fragment_length extension" \
            -C "found max_fragment_length extension"

requires_gnutls
run_test    "Max fragment length: gnutls server" \
            "$G_SRV" \
            "$P_CLI debug_level=3 max_frag_len=4096" \
            0 \
            -c "client hello, adding max_fragment_length extension" \
            -c "found max_fragment_length extension"

run_test    "Max fragment length: client, message just fits" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3 max_frag_len=2048 request_size=2048" \
            0 \
            -c "client hello, adding max_fragment_length extension" \
            -s "found max fragment length extension" \
            -s "server hello, max_fragment_length extension" \
            -c "found max_fragment_length extension" \
            -c "2048 bytes written in 1 fragments" \
            -s "2048 bytes read"

run_test    "Max fragment length: client, larger message" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3 max_frag_len=2048 request_size=2345" \
            0 \
            -c "client hello, adding max_fragment_length extension" \
            -s "found max fragment length extension" \
            -s "server hello, max_fragment_length extension" \
            -c "found max_fragment_length extension" \
            -c "2345 bytes written in 2 fragments" \
            -s "2048 bytes read" \
            -s "297 bytes read"

run_test    "Max fragment length: DTLS client, larger message" \
            "$P_SRV debug_level=3 dtls=1" \
            "$P_CLI debug_level=3 dtls=1 max_frag_len=2048 request_size=2345" \
            1 \
            -c "client hello, adding max_fragment_length extension" \
            -s "found max fragment length extension" \
            -s "server hello, max_fragment_length extension" \
            -c "found max_fragment_length extension" \
            -c "fragment larger than.*maximum"

# Tests for renegotiation

run_test    "Renegotiation: none, for reference" \
            "$P_SRV debug_level=3 exchanges=2" \
            "$P_CLI debug_level=3 exchanges=2" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -S "write hello request"

run_test    "Renegotiation: client-initiated" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -S "write hello request"

run_test    "Renegotiation: server-initiated" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request"

run_test    "Renegotiation: double" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request"

run_test    "Renegotiation: client-initiated, server-rejected" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=0" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            1 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -S "=> renegotiate" \
            -S "write hello request" \
            -c "SSL - Unexpected message at ServerHello in renegotiation" \
            -c "failed"

run_test    "Renegotiation: server-initiated, client-rejected, default" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: server-initiated, client-rejected, not enforced" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
             renego_delay=-1" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

# delay 2 for 1 alert record + 1 application data record
run_test    "Renegotiation: server-initiated, client-rejected, delay 2" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
             renego_delay=2" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: server-initiated, client-rejected, delay 0" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
             renego_delay=0" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -s "write hello request" \
            -s "SSL - An unexpected message was received from our peer"

run_test    "Renegotiation: server-initiated, client-accepted, delay 0" \
            "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
             renego_delay=0" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: periodic, just below period" \
            "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
            "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -S "record counter limit reached: renegotiate" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -S "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

# one extra exchange to be able to complete renego
run_test    "Renegotiation: periodic, just above period" \
            "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
            "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -s "record counter limit reached: renegotiate" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: periodic, two times period" \
            "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \
            "$P_CLI debug_level=3 exchanges=7 renegotiation=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -s "record counter limit reached: renegotiate" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: periodic, above period, disabled" \
            "$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3" \
            "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
            0 \
            -C "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -S "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -S "record counter limit reached: renegotiate" \
            -C "=> renegotiate" \
            -S "=> renegotiate" \
            -S "write hello request" \
            -S "SSL - An unexpected message was received from our peer" \
            -S "failed"

run_test    "Renegotiation: nbio, client-initiated" \
            "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
            "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -S "write hello request"

run_test    "Renegotiation: nbio, server-initiated" \
            "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
            "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request"

run_test    "Renegotiation: openssl server, client-initiated" \
            "$O_SRV -www" \
            "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_hanshake() returned" \
            -C "error" \
            -c "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renegotiation: gnutls server strict, client-initiated" \
            "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_hanshake() returned" \
            -C "error" \
            -c "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renegotiation: gnutls server unsafe, client-initiated default" \
            "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
            1 \
            -c "client hello, adding renegotiation extension" \
            -C "found renegotiation extension" \
            -c "=> renegotiate" \
            -c "ssl_handshake() returned" \
            -c "error" \
            -C "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renegotiation: gnutls server unsafe, client-inititated no legacy" \
            "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
             allow_legacy=0" \
            1 \
            -c "client hello, adding renegotiation extension" \
            -C "found renegotiation extension" \
            -c "=> renegotiate" \
            -c "ssl_handshake() returned" \
            -c "error" \
            -C "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renegotiation: gnutls server unsafe, client-inititated legacy" \
            "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
             allow_legacy=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -C "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_hanshake() returned" \
            -C "error" \
            -c "HTTP/1.0 200 [Oo][Kk]"

run_test    "Renegotiation: DTLS, client-initiated" \
            "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1" \
            "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -S "write hello request"

run_test    "Renegotiation: DTLS, server-initiated" \
            "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
            "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 \
             read_timeout=1000 max_resend=2" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO" \
            -s "found renegotiation extension" \
            -s "server hello, secure renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "write hello request"

requires_gnutls
run_test    "Renegotiation: DTLS, gnutls server, client-initiated" \
            "$G_SRV -u --mtu 4096" \
            "$P_CLI debug_level=3 dtls=1 exchanges=1 renegotiation=1 renegotiate=1" \
            0 \
            -c "client hello, adding renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_handshake returned" \
            -C "error" \
            -s "Extra-header:"

# Test for the "secure renegotation" extension only (no actual renegotiation)

requires_gnutls
run_test    "Renego ext: gnutls server strict, client default" \
            "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3" \
            0 \
            -c "found renegotiation extension" \
            -C "error" \
            -c "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renego ext: gnutls server unsafe, client default" \
            "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3" \
            0 \
            -C "found renegotiation extension" \
            -C "error" \
            -c "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renego ext: gnutls server unsafe, client break legacy" \
            "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            "$P_CLI debug_level=3 allow_legacy=-1" \
            1 \
            -C "found renegotiation extension" \
            -c "error" \
            -C "HTTP/1.0 200 [Oo][Kk]"

requires_gnutls
run_test    "Renego ext: gnutls client strict, server default" \
            "$P_SRV debug_level=3" \
            "$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION" \
            0 \
            -s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
            -s "server hello, secure renegotiation extension"

requires_gnutls
run_test    "Renego ext: gnutls client unsafe, server default" \
            "$P_SRV debug_level=3" \
            "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            0 \
            -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
            -S "server hello, secure renegotiation extension"

requires_gnutls
run_test    "Renego ext: gnutls client unsafe, server break legacy" \
            "$P_SRV debug_level=3 allow_legacy=-1" \
            "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
            1 \
            -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
            -S "server hello, secure renegotiation extension"

# Tests for auth_mode

run_test    "Authentication: server badcert, client required" \
            "$P_SRV crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            "$P_CLI debug_level=1 auth_mode=required" \
            1 \
            -c "x509_verify_cert() returned" \
            -c "! self-signed or not signed by a trusted CA" \
            -c "! ssl_handshake returned" \
            -c "X509 - Certificate verification failed"

run_test    "Authentication: server badcert, client optional" \
            "$P_SRV crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            "$P_CLI debug_level=1 auth_mode=optional" \
            0 \
            -c "x509_verify_cert() returned" \
            -c "! self-signed or not signed by a trusted CA" \
            -C "! ssl_handshake returned" \
            -C "X509 - Certificate verification failed"

run_test    "Authentication: server badcert, client none" \
            "$P_SRV crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            "$P_CLI debug_level=1 auth_mode=none" \
            0 \
            -C "x509_verify_cert() returned" \
            -C "! self-signed or not signed by a trusted CA" \
            -C "! ssl_handshake returned" \
            -C "X509 - Certificate verification failed"

run_test    "Authentication: client badcert, server required" \
            "$P_SRV debug_level=3 auth_mode=required" \
            "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            1 \
            -S "skip write certificate request" \
            -C "skip parse certificate request" \
            -c "got a certificate request" \
            -C "skip write certificate" \
            -C "skip write certificate verify" \
            -S "skip parse certificate verify" \
            -s "x509_verify_cert() returned" \
            -S "! self-signed or not signed by a trusted CA" \
            -s "! ssl_handshake returned" \
            -c "! ssl_handshake returned" \
            -s "X509 - Certificate verification failed"

run_test    "Authentication: client badcert, server optional" \
            "$P_SRV debug_level=3 auth_mode=optional" \
            "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            0 \
            -S "skip write certificate request" \
            -C "skip parse certificate request" \
            -c "got a certificate request" \
            -C "skip write certificate" \
            -C "skip write certificate verify" \
            -S "skip parse certificate verify" \
            -s "x509_verify_cert() returned" \
            -s "! self-signed or not signed by a trusted CA" \
            -S "! ssl_handshake returned" \
            -C "! ssl_handshake returned" \
            -S "X509 - Certificate verification failed"

run_test    "Authentication: client badcert, server none" \
            "$P_SRV debug_level=3 auth_mode=none" \
            "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
             key_file=data_files/server5.key" \
            0 \
            -s "skip write certificate request" \
            -C "skip parse certificate request" \
            -c "got no certificate request" \
            -c "skip write certificate" \
            -c "skip write certificate verify" \
            -s "skip parse certificate verify" \
            -S "x509_verify_cert() returned" \
            -S "! self-signed or not signed by a trusted CA" \
            -S "! ssl_handshake returned" \
            -C "! ssl_handshake returned" \
            -S "X509 - Certificate verification failed"

run_test    "Authentication: client no cert, server optional" \
            "$P_SRV debug_level=3 auth_mode=optional" \
            "$P_CLI debug_level=3 crt_file=none key_file=none" \
            0 \
            -S "skip write certificate request" \
            -C "skip parse certificate request" \
            -c "got a certificate request" \
            -C "skip write certificate$" \
            -C "got no certificate to send" \
            -S "SSLv3 client has no certificate" \
            -c "skip write certificate verify" \
            -s "skip parse certificate verify" \
            -s "! no client certificate sent" \
            -S "! ssl_handshake returned" \
            -C "! ssl_handshake returned" \
            -S "X509 - Certificate verification failed"

run_test    "Authentication: openssl client no cert, server optional" \
            "$P_SRV debug_level=3 auth_mode=optional" \
            "$O_CLI" \
            0 \
            -S "skip write certificate request" \
            -s "skip parse certificate verify" \
            -s "! no client certificate sent" \
            -S "! ssl_handshake returned" \
            -S "X509 - Certificate verification failed"

run_test    "Authentication: client no cert, openssl server optional" \
            "$O_SRV -verify 10" \
            "$P_CLI debug_level=3 crt_file=none key_file=none" \
            0 \
            -C "skip parse certificate request" \
            -c "got a certificate request" \
            -C "skip write certificate$" \
            -c "skip write certificate verify" \
            -C "! ssl_handshake returned"

run_test    "Authentication: client no cert, ssl3" \
            "$P_SRV debug_level=3 auth_mode=optional force_version=ssl3" \
            "$P_CLI debug_level=3 crt_file=none key_file=none min_version=ssl3" \
            0 \
            -S "skip write certificate request" \
            -C "skip parse certificate request" \
            -c "got a certificate request" \
            -C "skip write certificate$" \
            -c "skip write certificate verify" \
            -c "got no certificate to send" \
            -s "SSLv3 client has no certificate" \
            -s "skip parse certificate verify" \
            -s "! no client certificate sent" \
            -S "! ssl_handshake returned" \
            -C "! ssl_handshake returned" \
            -S "X509 - Certificate verification failed"

# Tests for certificate selection based on SHA verson

run_test    "Certificate hash: client TLS 1.2 -> SHA-2" \
            "$P_SRV crt_file=data_files/server5.crt \
                    key_file=data_files/server5.key \
                    crt_file2=data_files/server5-sha1.crt \
                    key_file2=data_files/server5.key" \
            "$P_CLI force_version=tls1_2" \
            0 \
            -c "signed using.*ECDSA with SHA256" \
            -C "signed using.*ECDSA with SHA1"

run_test    "Certificate hash: client TLS 1.1 -> SHA-1" \
            "$P_SRV crt_file=data_files/server5.crt \
                    key_file=data_files/server5.key \
                    crt_file2=data_files/server5-sha1.crt \
                    key_file2=data_files/server5.key" \
            "$P_CLI force_version=tls1_1" \
            0 \
            -C "signed using.*ECDSA with SHA256" \
            -c "signed using.*ECDSA with SHA1"

run_test    "Certificate hash: client TLS 1.0 -> SHA-1" \
            "$P_SRV crt_file=data_files/server5.crt \
                    key_file=data_files/server5.key \
                    crt_file2=data_files/server5-sha1.crt \
                    key_file2=data_files/server5.key" \
            "$P_CLI force_version=tls1" \
            0 \
            -C "signed using.*ECDSA with SHA256" \
            -c "signed using.*ECDSA with SHA1"

run_test    "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 1)" \
            "$P_SRV crt_file=data_files/server5.crt \
                    key_file=data_files/server5.key \
                    crt_file2=data_files/server6.crt \
                    key_file2=data_files/server6.key" \
            "$P_CLI force_version=tls1_1" \
            0 \
            -c "serial number.*09" \
            -c "signed using.*ECDSA with SHA256" \
            -C "signed using.*ECDSA with SHA1"

run_test    "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 2)" \
            "$P_SRV crt_file=data_files/server6.crt \
                    key_file=data_files/server6.key \
                    crt_file2=data_files/server5.crt \
                    key_file2=data_files/server5.key" \
            "$P_CLI force_version=tls1_1" \
            0 \
            -c "serial number.*0A" \
            -c "signed using.*ECDSA with SHA256" \
            -C "signed using.*ECDSA with SHA1"

# tests for SNI

run_test    "SNI: no SNI callback" \
            "$P_SRV debug_level=3 \
             crt_file=data_files/server5.crt key_file=data_files/server5.key" \
            "$P_CLI server_name=localhost" \
             0 \
             -S "parse ServerName extension" \
             -c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"

run_test    "SNI: matching cert 1" \
            "$P_SRV debug_level=3 \
             crt_file=data_files/server5.crt key_file=data_files/server5.key \
             sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
            "$P_CLI server_name=localhost" \
             0 \
             -s "parse ServerName extension" \
             -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"

run_test    "SNI: matching cert 2" \
            "$P_SRV debug_level=3 \
             crt_file=data_files/server5.crt key_file=data_files/server5.key \
             sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
            "$P_CLI server_name=polarssl.example" \
             0 \
             -s "parse ServerName extension" \
             -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
             -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"

run_test    "SNI: no matching cert" \
            "$P_SRV debug_level=3 \
             crt_file=data_files/server5.crt key_file=data_files/server5.key \
             sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
            "$P_CLI server_name=nonesuch.example" \
             1 \
             -s "parse ServerName extension" \
             -s "ssl_sni_wrapper() returned" \
             -s "ssl_handshake returned" \
             -c "ssl_handshake returned" \
             -c "SSL - A fatal alert message was received from our peer"

# Tests for non-blocking I/O: exercise a variety of handshake flows

run_test    "Non-blocking I/O: basic handshake" \
            "$P_SRV nbio=2 tickets=0 auth_mode=none" \
            "$P_CLI nbio=2 tickets=0" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: client auth" \
            "$P_SRV nbio=2 tickets=0 auth_mode=required" \
            "$P_CLI nbio=2 tickets=0" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: ticket" \
            "$P_SRV nbio=2 tickets=1 auth_mode=none" \
            "$P_CLI nbio=2 tickets=1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: ticket + client auth" \
            "$P_SRV nbio=2 tickets=1 auth_mode=required" \
            "$P_CLI nbio=2 tickets=1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: ticket + client auth + resume" \
            "$P_SRV nbio=2 tickets=1 auth_mode=required" \
            "$P_CLI nbio=2 tickets=1 reconnect=1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: ticket + resume" \
            "$P_SRV nbio=2 tickets=1 auth_mode=none" \
            "$P_CLI nbio=2 tickets=1 reconnect=1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

run_test    "Non-blocking I/O: session-id resume" \
            "$P_SRV nbio=2 tickets=0 auth_mode=none" \
            "$P_CLI nbio=2 tickets=0 reconnect=1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -c "Read from server: .* bytes read"

# Tests for version negotiation

run_test    "Version check: all -> 1.2" \
            "$P_SRV" \
            "$P_CLI" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.2" \
            -c "Protocol is TLSv1.2"

run_test    "Version check: cli max 1.1 -> 1.1" \
            "$P_SRV" \
            "$P_CLI max_version=tls1_1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.1" \
            -c "Protocol is TLSv1.1"

run_test    "Version check: srv max 1.1 -> 1.1" \
            "$P_SRV max_version=tls1_1" \
            "$P_CLI" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.1" \
            -c "Protocol is TLSv1.1"

run_test    "Version check: cli+srv max 1.1 -> 1.1" \
            "$P_SRV max_version=tls1_1" \
            "$P_CLI max_version=tls1_1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.1" \
            -c "Protocol is TLSv1.1"

run_test    "Version check: cli max 1.1, srv min 1.1 -> 1.1" \
            "$P_SRV min_version=tls1_1" \
            "$P_CLI max_version=tls1_1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.1" \
            -c "Protocol is TLSv1.1"

run_test    "Version check: cli min 1.1, srv max 1.1 -> 1.1" \
            "$P_SRV max_version=tls1_1" \
            "$P_CLI min_version=tls1_1" \
            0 \
            -S "ssl_handshake returned" \
            -C "ssl_handshake returned" \
            -s "Protocol is TLSv1.1" \
            -c "Protocol is TLSv1.1"

run_test    "Version check: cli min 1.2, srv max 1.1 -> fail" \
            "$P_SRV max_version=tls1_1" \
            "$P_CLI min_version=tls1_2" \
            1 \
            -s "ssl_handshake returned" \
            -c "ssl_handshake returned" \
            -c "SSL - Handshake protocol not within min/max boundaries"

run_test    "Version check: srv min 1.2, cli max 1.1 -> fail" \
            "$P_SRV min_version=tls1_2" \
            "$P_CLI max_version=tls1_1" \
            1 \
            -s "ssl_handshake returned" \
            -c "ssl_handshake returned" \
            -s "SSL - Handshake protocol not within min/max boundaries"

# Tests for ALPN extension

if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then

run_test    "ALPN: none" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3" \
            0 \
            -C "client hello, adding alpn extension" \
            -S "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -S "server hello, adding alpn extension" \
            -C "found alpn extension " \
            -C "Application Layer Protocol is" \
            -S "Application Layer Protocol is"

run_test    "ALPN: client only" \
            "$P_SRV debug_level=3" \
            "$P_CLI debug_level=3 alpn=abc,1234" \
            0 \
            -c "client hello, adding alpn extension" \
            -s "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -S "server hello, adding alpn extension" \
            -C "found alpn extension " \
            -c "Application Layer Protocol is (none)" \
            -S "Application Layer Protocol is"

run_test    "ALPN: server only" \
            "$P_SRV debug_level=3 alpn=abc,1234" \
            "$P_CLI debug_level=3" \
            0 \
            -C "client hello, adding alpn extension" \
            -S "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -S "server hello, adding alpn extension" \
            -C "found alpn extension " \
            -C "Application Layer Protocol is" \
            -s "Application Layer Protocol is (none)"

run_test    "ALPN: both, common cli1-srv1" \
            "$P_SRV debug_level=3 alpn=abc,1234" \
            "$P_CLI debug_level=3 alpn=abc,1234" \
            0 \
            -c "client hello, adding alpn extension" \
            -s "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -s "server hello, adding alpn extension" \
            -c "found alpn extension" \
            -c "Application Layer Protocol is abc" \
            -s "Application Layer Protocol is abc"

run_test    "ALPN: both, common cli2-srv1" \
            "$P_SRV debug_level=3 alpn=abc,1234" \
            "$P_CLI debug_level=3 alpn=1234,abc" \
            0 \
            -c "client hello, adding alpn extension" \
            -s "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -s "server hello, adding alpn extension" \
            -c "found alpn extension" \
            -c "Application Layer Protocol is abc" \
            -s "Application Layer Protocol is abc"

run_test    "ALPN: both, common cli1-srv2" \
            "$P_SRV debug_level=3 alpn=abc,1234" \
            "$P_CLI debug_level=3 alpn=1234,abcde" \
            0 \
            -c "client hello, adding alpn extension" \
            -s "found alpn extension" \
            -C "got an alert message, type: \\[2:120]" \
            -s "server hello, adding alpn extension" \
            -c "found alpn extension" \
            -c "Application Layer Protocol is 1234" \
            -s "Application Layer Protocol is 1234"

run_test    "ALPN: both, no common" \
            "$P_SRV debug_level=3 alpn=abc,123" \
            "$P_CLI debug_level=3 alpn=1234,abcde" \
            1 \
            -c "client hello, adding alpn extension" \
            -s "found alpn extension" \
            -c "got an alert message, type: \\[2:120]" \
            -S "server hello, adding alpn extension" \
            -C "found alpn extension" \
            -C "Application Layer Protocol is 1234" \
            -S "Application Layer Protocol is 1234"

fi

# Tests for keyUsage in leaf certificates, part 1:
# server-side certificate/suite selection

run_test    "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \
            "$P_SRV key_file=data_files/server2.key \
             crt_file=data_files/server2.ku-ds.crt" \
            "$P_CLI" \
            0 \
            -c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-"


run_test    "keyUsage srv: RSA, keyEncipherment -> RSA" \
            "$P_SRV key_file=data_files/server2.key \
             crt_file=data_files/server2.ku-ke.crt" \
            "$P_CLI" \
            0 \
            -c "Ciphersuite is TLS-RSA-WITH-"

run_test    "keyUsage srv: RSA, keyAgreement -> fail" \
            "$P_SRV key_file=data_files/server2.key \
             crt_file=data_files/server2.ku-ka.crt" \
            "$P_CLI" \
            1 \
            -C "Ciphersuite is "

run_test    "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.ku-ds.crt" \
            "$P_CLI" \
            0 \
            -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-"


run_test    "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.ku-ka.crt" \
            "$P_CLI" \
            0 \
            -c "Ciphersuite is TLS-ECDH-"

run_test    "keyUsage srv: ECDSA, keyEncipherment -> fail" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.ku-ke.crt" \
            "$P_CLI" \
            1 \
            -C "Ciphersuite is "

# Tests for keyUsage in leaf certificates, part 2:
# client-side checking of server cert

run_test    "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ds_ke.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ds_ke.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "keyUsage cli: KeyEncipherment, RSA: OK" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ke.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ke.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
            1 \
            -c "bad certificate (usage extensions)" \
            -c "Processing of the Certificate handshake message failed" \
            -C "Ciphersuite is TLS-"

run_test    "keyUsage cli: DigitalSignature, DHE-RSA: OK" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ds.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "keyUsage cli: DigitalSignature, RSA: fail" \
            "$O_SRV -key data_files/server2.key \
             -cert data_files/server2.ku-ds.crt" \
            "$P_CLI debug_level=1 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            1 \
            -c "bad certificate (usage extensions)" \
            -c "Processing of the Certificate handshake message failed" \
            -C "Ciphersuite is TLS-"

# Tests for keyUsage in leaf certificates, part 3:
# server-side checking of client cert

run_test    "keyUsage cli-auth: RSA, DigitalSignature: OK" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server2.key \
             -cert data_files/server2.ku-ds.crt" \
            0 \
            -S "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server2.key \
             -cert data_files/server2.ku-ke.crt" \
            0 \
            -s "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \
            "$P_SRV debug_level=1 auth_mode=required" \
            "$O_CLI -key data_files/server2.key \
             -cert data_files/server2.ku-ke.crt" \
            1 \
            -s "bad certificate (usage extensions)" \
            -s "Processing of the Certificate handshake message failed"

run_test    "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.ku-ds.crt" \
            0 \
            -S "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.ku-ka.crt" \
            0 \
            -s "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

# Tests for extendedKeyUsage, part 1: server-side certificate/suite selection

run_test    "extKeyUsage srv: serverAuth -> OK" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.eku-srv.crt" \
            "$P_CLI" \
            0

run_test    "extKeyUsage srv: serverAuth,clientAuth -> OK" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.eku-srv.crt" \
            "$P_CLI" \
            0

run_test    "extKeyUsage srv: codeSign,anyEKU -> OK" \
            "$P_SRV key_file=data_files/server5.key \
             crt_file=data_files/server5.eku-cs_any.crt" \
            "$P_CLI" \
            0

# add psk to leave an option for client to send SERVERQUIT
run_test    "extKeyUsage srv: codeSign -> fail" \
            "$P_SRV psk=abc123 key_file=data_files/server5.key \
             crt_file=data_files/server5.eku-cli.crt" \
            "$P_CLI psk=badbad" \
            1

# Tests for extendedKeyUsage, part 2: client-side checking of server cert

run_test    "extKeyUsage cli: serverAuth -> OK" \
            "$O_SRV -key data_files/server5.key \
             -cert data_files/server5.eku-srv.crt" \
            "$P_CLI debug_level=1" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "extKeyUsage cli: serverAuth,clientAuth -> OK" \
            "$O_SRV -key data_files/server5.key \
             -cert data_files/server5.eku-srv_cli.crt" \
            "$P_CLI debug_level=1" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "extKeyUsage cli: codeSign,anyEKU -> OK" \
            "$O_SRV -key data_files/server5.key \
             -cert data_files/server5.eku-cs_any.crt" \
            "$P_CLI debug_level=1" \
            0 \
            -C "bad certificate (usage extensions)" \
            -C "Processing of the Certificate handshake message failed" \
            -c "Ciphersuite is TLS-"

run_test    "extKeyUsage cli: codeSign -> fail" \
            "$O_SRV -key data_files/server5.key \
             -cert data_files/server5.eku-cs.crt" \
            "$P_CLI debug_level=1" \
            1 \
            -c "bad certificate (usage extensions)" \
            -c "Processing of the Certificate handshake message failed" \
            -C "Ciphersuite is TLS-"

# Tests for extendedKeyUsage, part 3: server-side checking of client cert

run_test    "extKeyUsage cli-auth: clientAuth -> OK" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.eku-cli.crt" \
            0 \
            -S "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.eku-srv_cli.crt" \
            0 \
            -S "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.eku-cs_any.crt" \
            0 \
            -S "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "extKeyUsage cli-auth: codeSign -> fail (soft)" \
            "$P_SRV debug_level=1 auth_mode=optional" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.eku-cs.crt" \
            0 \
            -s "bad certificate (usage extensions)" \
            -S "Processing of the Certificate handshake message failed"

run_test    "extKeyUsage cli-auth: codeSign -> fail (hard)" \
            "$P_SRV debug_level=1 auth_mode=required" \
            "$O_CLI -key data_files/server5.key \
             -cert data_files/server5.eku-cs.crt" \
            1 \
            -s "bad certificate (usage extensions)" \
            -s "Processing of the Certificate handshake message failed"

# Tests for DHM parameters loading

run_test    "DHM parameters: reference" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
                    debug_level=3" \
            0 \
            -c "value of 'DHM: P ' (2048 bits)" \
            -c "value of 'DHM: G ' (2048 bits)"

run_test    "DHM parameters: other parameters" \
            "$P_SRV dhm_file=data_files/dhparams.pem" \
            "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
                    debug_level=3" \
            0 \
            -c "value of 'DHM: P ' (1024 bits)" \
            -c "value of 'DHM: G ' (2 bits)"

# Tests for PSK callback

run_test    "PSK callback: psk, no callback" \
            "$P_SRV psk=abc123 psk_identity=foo" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=foo psk=abc123" \
            0 \
            -S "SSL - None of the common ciphersuites is usable" \
            -S "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: no psk, no callback" \
            "$P_SRV" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=foo psk=abc123" \
            1 \
            -s "SSL - None of the common ciphersuites is usable" \
            -S "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: callback overrides other settings" \
            "$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=foo psk=abc123" \
            1 \
            -S "SSL - None of the common ciphersuites is usable" \
            -s "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: first id matches" \
            "$P_SRV psk_list=abc,dead,def,beef" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=abc psk=dead" \
            0 \
            -S "SSL - None of the common ciphersuites is usable" \
            -S "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: second id matches" \
            "$P_SRV psk_list=abc,dead,def,beef" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=def psk=beef" \
            0 \
            -S "SSL - None of the common ciphersuites is usable" \
            -S "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: no match" \
            "$P_SRV psk_list=abc,dead,def,beef" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=ghi psk=beef" \
            1 \
            -S "SSL - None of the common ciphersuites is usable" \
            -s "SSL - Unknown identity received" \
            -S "SSL - Verification of the message MAC failed"

run_test    "PSK callback: wrong key" \
            "$P_SRV psk_list=abc,dead,def,beef" \
            "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
            psk_identity=abc psk=beef" \
            1 \
            -S "SSL - None of the common ciphersuites is usable" \
            -S "SSL - Unknown identity received" \
            -s "SSL - Verification of the message MAC failed"

# Tests for ciphersuites per version

run_test    "Per-version suites: SSL3" \
            "$P_SRV min_version=ssl3 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
            "$P_CLI force_version=ssl3" \
            0 \
            -c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA"

run_test    "Per-version suites: TLS 1.0" \
            "$P_SRV arc4=1 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
            "$P_CLI force_version=tls1 arc4=1" \
            0 \
            -c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA"

run_test    "Per-version suites: TLS 1.1" \
            "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
            "$P_CLI force_version=tls1_1" \
            0 \
            -c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA"

run_test    "Per-version suites: TLS 1.2" \
            "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
            "$P_CLI force_version=tls1_2" \
            0 \
            -c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256"

# Tests for ssl_get_bytes_avail()

run_test    "ssl_get_bytes_avail: no extra data" \
            "$P_SRV" \
            "$P_CLI request_size=100" \
            0 \
            -s "Read from client: 100 bytes read$"

run_test    "ssl_get_bytes_avail: extra data" \
            "$P_SRV" \
            "$P_CLI request_size=500" \
            0 \
            -s "Read from client: 500 bytes read (.*+.*)"

# Tests for small packets

run_test    "Small packet SSLv3 BlockCipher" \
            "$P_SRV min_version=ssl3" \
            "$P_CLI request_size=1 force_version=ssl3 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet SSLv3 StreamCipher" \
            "$P_SRV min_version=ssl3 arc4=1" \
            "$P_CLI request_size=1 force_version=ssl3 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.0 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.0 BlockCipher without EtM" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1 etm=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.0 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.0 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=1 force_version=tls1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.1 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.1 BlockCipher without EtM" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_1 etm=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.1 StreamCipher" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=1 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.1 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.1 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=1 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 BlockCipher without EtM" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 etm=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 BlockCipher larger MAC" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 StreamCipher" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 AEAD" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
            0 \
            -s "Read from client: 1 bytes read"

run_test    "Small packet TLS 1.2 AEAD shorter tag" \
            "$P_SRV" \
            "$P_CLI request_size=1 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
            0 \
            -s "Read from client: 1 bytes read"

# Test for large packets

run_test    "Large packet SSLv3 BlockCipher" \
            "$P_SRV min_version=ssl3" \
            "$P_CLI request_size=16384 force_version=ssl3 recsplit=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet SSLv3 StreamCipher" \
            "$P_SRV min_version=ssl3 arc4=1" \
            "$P_CLI request_size=16384 force_version=ssl3 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.0 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.0 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.0 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=16384 force_version=tls1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.1 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.1 StreamCipher" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=16384 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.1 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.1 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=16384 force_version=tls1_1 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 BlockCipher" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 BlockCipher larger MAC" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 BlockCipher truncated MAC" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 StreamCipher" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 StreamCipher truncated MAC" \
            "$P_SRV arc4=1" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
             trunc_hmac=1" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 AEAD" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
            0 \
            -s "Read from client: 16384 bytes read"

run_test    "Large packet TLS 1.2 AEAD shorter tag" \
            "$P_SRV" \
            "$P_CLI request_size=16384 force_version=tls1_2 \
             force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
            0 \
            -s "Read from client: 16384 bytes read"

# Tests for DTLS HelloVerifyRequest

run_test    "DTLS cookie: enabled" \
            "$P_SRV dtls=1 debug_level=2" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -s "cookie verification failed" \
            -s "cookie verification passed" \
            -S "cookie verification skipped" \
            -c "received hello verify request" \
            -s "hello verification requested" \
            -S "SSL - The requested feature is not available"

run_test    "DTLS cookie: disabled" \
            "$P_SRV dtls=1 debug_level=2 cookies=0" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -S "cookie verification failed" \
            -S "cookie verification passed" \
            -s "cookie verification skipped" \
            -C "received hello verify request" \
            -S "hello verification requested" \
            -S "SSL - The requested feature is not available"

run_test    "DTLS cookie: default (failing)" \
            "$P_SRV dtls=1 debug_level=2 cookies=-1" \
            "$P_CLI dtls=1 debug_level=2 hs_timeout=100-400" \
            1 \
            -s "cookie verification failed" \
            -S "cookie verification passed" \
            -S "cookie verification skipped" \
            -C "received hello verify request" \
            -S "hello verification requested" \
            -s "SSL - The requested feature is not available"

requires_ipv6
run_test    "DTLS cookie: enabled, IPv6" \
            "$P_SRV dtls=1 debug_level=2 server_addr=::1" \
            "$P_CLI dtls=1 debug_level=2 server_addr=::1" \
            0 \
            -s "cookie verification failed" \
            -s "cookie verification passed" \
            -S "cookie verification skipped" \
            -c "received hello verify request" \
            -s "hello verification requested" \
            -S "SSL - The requested feature is not available"

run_test    "DTLS cookie: enabled, nbio" \
            "$P_SRV dtls=1 nbio=2 debug_level=2" \
            "$P_CLI dtls=1 nbio=2 debug_level=2" \
            0 \
            -s "cookie verification failed" \
            -s "cookie verification passed" \
            -S "cookie verification skipped" \
            -c "received hello verify request" \
            -s "hello verification requested" \
            -S "SSL - The requested feature is not available"

# Tests for various cases of client authentication with DTLS
# (focused on handshake flows and message parsing)

run_test    "DTLS client auth: required" \
            "$P_SRV dtls=1 auth_mode=required" \
            "$P_CLI dtls=1" \
            0 \
            -s "Verifying peer X.509 certificate... ok"

run_test    "DTLS client auth: optional, client has no cert" \
            "$P_SRV dtls=1 auth_mode=optional" \
            "$P_CLI dtls=1 crt_file=none key_file=none" \
            0 \
            -s "! no client certificate sent"

run_test    "DTLS client auth: optional, client has no cert" \
            "$P_SRV dtls=1 auth_mode=none" \
            "$P_CLI dtls=1 crt_file=none key_file=none debug_level=2" \
            0 \
            -c "skip write certificate$" \
            -s "! no client certificate sent"

# Tests for receiving fragmented handshake messages with DTLS

requires_gnutls
run_test    "DTLS reassembly: no fragmentation (gnutls server)" \
            "$G_SRV -u --mtu 2048 -a" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -C "found fragmented DTLS handshake message" \
            -C "error"

requires_gnutls
run_test    "DTLS reassembly: some fragmentation (gnutls server)" \
            "$G_SRV -u --mtu 512" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

requires_gnutls
run_test    "DTLS reassembly: more fragmentation (gnutls server)" \
            "$G_SRV -u --mtu 128" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

requires_gnutls
run_test    "DTLS reassembly: more fragmentation, nbio (gnutls server)" \
            "$G_SRV -u --mtu 128" \
            "$P_CLI dtls=1 nbio=2 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

requires_gnutls
run_test    "DTLS reassembly: fragmentation, renego (gnutls server)" \
            "$G_SRV -u --mtu 256" \
            "$P_CLI debug_level=3 dtls=1 renegotiation=1 renegotiate=1" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -c "client hello, adding renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_handshake returned" \
            -C "error" \
            -s "Extra-header:"

requires_gnutls
run_test    "DTLS reassembly: fragmentation, nbio, renego (gnutls server)" \
            "$G_SRV -u --mtu 256" \
            "$P_CLI debug_level=3 nbio=2 dtls=1 renegotiation=1 renegotiate=1" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -c "client hello, adding renegotiation extension" \
            -c "found renegotiation extension" \
            -c "=> renegotiate" \
            -C "ssl_handshake returned" \
            -C "error" \
            -s "Extra-header:"

run_test    "DTLS reassembly: no fragmentation (openssl server)" \
            "$O_SRV -dtls1 -mtu 2048" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -C "found fragmented DTLS handshake message" \
            -C "error"

run_test    "DTLS reassembly: some fragmentation (openssl server)" \
            "$O_SRV -dtls1 -mtu 768" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

run_test    "DTLS reassembly: more fragmentation (openssl server)" \
            "$O_SRV -dtls1 -mtu 256" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

run_test    "DTLS reassembly: fragmentation, nbio (openssl server)" \
            "$O_SRV -dtls1 -mtu 256" \
            "$P_CLI dtls=1 nbio=2 debug_level=2" \
            0 \
            -c "found fragmented DTLS handshake message" \
            -C "error"

# Tests for specific things with "unreliable" UDP connection

not_with_valgrind # spurious resend due to timeout
run_test    "DTLS proxy: reference" \
            -p "$P_PXY" \
            "$P_SRV dtls=1 debug_level=2" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -C "replayed record" \
            -S "replayed record" \
            -C "record from another epoch" \
            -S "record from another epoch" \
            -C "discarding invalid record" \
            -S "discarding invalid record" \
            -S "resend" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

not_with_valgrind # spurious resend due to timeout
run_test    "DTLS proxy: duplicate every packet" \
            -p "$P_PXY duplicate=1" \
            "$P_SRV dtls=1 debug_level=2" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "replayed record" \
            -s "replayed record" \
            -c "discarding invalid record" \
            -s "discarding invalid record" \
            -S "resend" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

run_test    "DTLS proxy: duplicate every packet, server anti-replay off" \
            -p "$P_PXY duplicate=1" \
            "$P_SRV dtls=1 debug_level=2 anti_replay=0" \
            "$P_CLI dtls=1 debug_level=2" \
            0 \
            -c "replayed record" \
            -S "replayed record" \
            -c "discarding invalid record" \
            -s "discarding invalid record" \
            -c "resend" \
            -s "resend" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

run_test    "DTLS proxy: inject invalid AD record, default badmac_limit" \
            -p "$P_PXY bad_ad=1" \
            "$P_SRV dtls=1 debug_level=1" \
            "$P_CLI dtls=1 debug_level=1 read_timeout=100" \
            0 \
            -c "discarding invalid record (mac)" \
            -s "discarding invalid record (mac)" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK" \
            -S "too many records with bad MAC" \
            -S "Verification of the message MAC failed"

run_test    "DTLS proxy: inject invalid AD record, badmac_limit 1" \
            -p "$P_PXY bad_ad=1" \
            "$P_SRV dtls=1 debug_level=1 badmac_limit=1" \
            "$P_CLI dtls=1 debug_level=1 read_timeout=100" \
            1 \
            -C "discarding invalid record (mac)" \
            -S "discarding invalid record (mac)" \
            -S "Extra-header:" \
            -C "HTTP/1.0 200 OK" \
            -s "too many records with bad MAC" \
            -s "Verification of the message MAC failed"

run_test    "DTLS proxy: inject invalid AD record, badmac_limit 2" \
            -p "$P_PXY bad_ad=1" \
            "$P_SRV dtls=1 debug_level=1 badmac_limit=2" \
            "$P_CLI dtls=1 debug_level=1 read_timeout=100" \
            0 \
            -c "discarding invalid record (mac)" \
            -s "discarding invalid record (mac)" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK" \
            -S "too many records with bad MAC" \
            -S "Verification of the message MAC failed"

run_test    "DTLS proxy: inject invalid AD record, badmac_limit 2, exchanges 2"\
            -p "$P_PXY bad_ad=1" \
            "$P_SRV dtls=1 debug_level=1 badmac_limit=2 exchanges=2" \
            "$P_CLI dtls=1 debug_level=1 read_timeout=100 exchanges=2" \
            1 \
            -c "discarding invalid record (mac)" \
            -s "discarding invalid record (mac)" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK" \
            -s "too many records with bad MAC" \
            -s "Verification of the message MAC failed"

run_test    "DTLS proxy: delay ChangeCipherSpec" \
            -p "$P_PXY delay_ccs=1" \
            "$P_SRV dtls=1 debug_level=1" \
            "$P_CLI dtls=1 debug_level=1" \
            0 \
            -c "record from another epoch" \
            -s "record from another epoch" \
            -c "discarding invalid record" \
            -s "discarding invalid record" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

# Tests for "randomly unreliable connection": try a variety of flows and peers

needs_more_time 2
run_test    "DTLS proxy: 3d (drop, delay, duplicate), \"short\" PSK handshake" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, \"short\" RSA handshake" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 \
             force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, \"short\" (no ticket, no cli_auth) FS handshake" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, FS, client auth" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=required" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, FS, ticket" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=none" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, max handshake (FS, ticket + client auth)" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=required" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 2
run_test    "DTLS proxy: 3d, max handshake, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 nbio=2 tickets=1 \
             auth_mode=required" \
            "$P_CLI dtls=1 hs_timeout=250-10000 nbio=2 tickets=1" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, resumption" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 debug_level=3" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -s "a session has been resumed" \
            -c "a session has been resumed" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, resumption, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 debug_level=3 nbio=2" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8 nbio=2" \
            0 \
            -s "a session has been resumed" \
            -c "a session has been resumed" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, client-initiated renego" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 renegotiation=1 debug_level=2" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             renegotiate=1 debug_level=2 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, client-initiated renego, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 renegotiation=1 debug_level=2" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             renegotiate=1 debug_level=2 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, server-initiated renego" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \
             debug_level=2" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             renegotiation=1 exchanges=4 debug_level=2 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 4
run_test    "DTLS proxy: 3d, min handshake, server-initiated renego, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
             psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \
             debug_level=2 nbio=2" \
            "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
             renegotiation=1 exchanges=4 debug_level=2 nbio=2 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
            0 \
            -c "=> renegotiate" \
            -s "=> renegotiate" \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 6
run_test    "DTLS proxy: 3d, openssl server" \
            -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
            "$O_SRV -dtls1 -mtu 2048" \
            "$P_CLI dtls=1 hs_timeout=250-60000 tickets=0" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 6
run_test    "DTLS proxy: 3d, openssl server, fragmentation" \
            -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
            "$O_SRV -dtls1 -mtu 768" \
            "$P_CLI dtls=1 hs_timeout=250-60000 tickets=0" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

needs_more_time 6
run_test    "DTLS proxy: 3d, openssl server, fragmentation, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
            "$O_SRV -dtls1 -mtu 768" \
            "$P_CLI dtls=1 hs_timeout=250-60000 nbio=2 tickets=0" \
            0 \
            -s "Extra-header:" \
            -c "HTTP/1.0 200 OK"

requires_gnutls
needs_more_time 6
run_test    "DTLS proxy: 3d, gnutls server" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$G_SRV -u --mtu 2048 -a" \
            "$P_CLI dtls=1 hs_timeout=250-60000" \
            0 \
            -s "Extra-header:" \
            -c "Extra-header:"

requires_gnutls
needs_more_time 6
run_test    "DTLS proxy: 3d, gnutls server, fragmentation" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$G_SRV -u --mtu 512" \
            "$P_CLI dtls=1 hs_timeout=250-60000" \
            0 \
            -s "Extra-header:" \
            -c "Extra-header:"

requires_gnutls
needs_more_time 6
run_test    "DTLS proxy: 3d, gnutls server, fragmentation, nbio" \
            -p "$P_PXY drop=5 delay=5 duplicate=5" \
            "$G_SRV -u --mtu 512" \
            "$P_CLI dtls=1 hs_timeout=250-60000 nbio=2" \
            0 \
            -s "Extra-header:" \
            -c "Extra-header:"

# Final report

echo "------------------------------------------------------------------------"

if [ $FAILS = 0 ]; then
    printf "PASSED"
else
    printf "FAILED"
fi
PASSES=$(( $TESTS - $FAILS ))
echo " ($PASSES / $TESTS tests ($SKIPS skipped))"

exit $FAILS