/**
 * \file macros.h
 *
 * \brief   This file contains generic macros for the purpose of testing.
 */

/*
 *  Copyright The Mbed TLS Contributors
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */

#ifndef TEST_MACROS_H
#define TEST_MACROS_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stdlib.h>

#if defined(MBEDTLS_PLATFORM_C)
#include "mbedtls/platform.h"
#else
#include <stdio.h>
#define mbedtls_fprintf    fprintf
#define mbedtls_snprintf   snprintf
#define mbedtls_calloc     calloc
#define mbedtls_free       free
#define mbedtls_exit       exit
#define mbedtls_time       time
#define mbedtls_time_t     time_t
#define MBEDTLS_EXIT_SUCCESS EXIT_SUCCESS
#define MBEDTLS_EXIT_FAILURE EXIT_FAILURE
#endif

#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
#include "mbedtls/memory_buffer_alloc.h"
#endif

/**
 * \brief   This macro tests the expression passed to it as a test step or
 *          individual test in a test case.
 *
 *          It allows a library function to return a value and return an error
 *          code that can be tested.
 *
 *          When MBEDTLS_CHECK_PARAMS is enabled, calls to the parameter failure
 *          callback, MBEDTLS_PARAM_FAILED(), will be assumed to be a test
 *          failure.
 *
 *          This macro is not suitable for negative parameter validation tests,
 *          as it assumes the test step will not create an error.
 *
 *          Failing the test means:
 *          - Mark this test case as failed.
 *          - Print a message identifying the failure.
 *          - Jump to the \c exit label.
 *
 *          This macro expands to an instruction, not an expression.
 *          It may jump to the \c exit label.
 *
 * \param   TEST    The test expression to be tested.
 */
#define TEST_ASSERT( TEST )                                 \
    do {                                                    \
       if( ! (TEST) )                                       \
       {                                                    \
          mbedtls_test_fail( #TEST, __LINE__, __FILE__ );   \
          goto exit;                                        \
       }                                                    \
    } while( 0 )

/** Evaluate two expressions and fail the test case if they have different
 * values.
 *
 * \param expr1     An expression to evaluate.
 * \param expr2     The expected value of \p expr1. This can be any
 *                  expression, but it is typically a constant.
 */
#define TEST_EQUAL( expr1, expr2 )              \
    TEST_ASSERT( ( expr1 ) == ( expr2 ) )

/** Allocate memory dynamically and fail the test case if this fails.
 * The allocated memory will be filled with zeros.
 *
 * You must set \p pointer to \c NULL before calling this macro and
 * put `mbedtls_free( pointer )` in the test's cleanup code.
 *
 * If \p length is zero, the resulting \p pointer will be \c NULL.
 * This is usually what we want in tests since API functions are
 * supposed to accept null pointers when a buffer size is zero.
 *
 * This macro expands to an instruction, not an expression.
 * It may jump to the \c exit label.
 *
 * \param pointer   An lvalue where the address of the allocated buffer
 *                  will be stored.
 *                  This expression may be evaluated multiple times.
 * \param length    Number of elements to allocate.
 *                  This expression may be evaluated multiple times.
 *
 */
#define ASSERT_ALLOC( pointer, length )                           \
    do                                                            \
    {                                                             \
        TEST_ASSERT( ( pointer ) == NULL );                       \
        if( ( length ) != 0 )                                     \
        {                                                         \
            ( pointer ) = mbedtls_calloc( sizeof( *( pointer ) ), \
                                          ( length ) );           \
            TEST_ASSERT( ( pointer ) != NULL );                   \
        }                                                         \
    }                                                             \
    while( 0 )

/** Allocate memory dynamically. If the allocation fails, skip the test case.
 *
 * This macro behaves like #ASSERT_ALLOC, except that if the allocation
 * fails, it marks the test as skipped rather than failed.
 */
#define ASSERT_ALLOC_WEAK( pointer, length )                      \
    do                                                            \
    {                                                             \
        TEST_ASSERT( ( pointer ) == NULL );                       \
        if( ( length ) != 0 )                                     \
        {                                                         \
            ( pointer ) = mbedtls_calloc( sizeof( *( pointer ) ), \
                                          ( length ) );           \
            TEST_ASSUME( ( pointer ) != NULL );                   \
        }                                                         \
    }                                                             \
    while( 0 )

/** Compare two buffers and fail the test case if they differ.
 *
 * This macro expands to an instruction, not an expression.
 * It may jump to the \c exit label.
 *
 * \param p1        Pointer to the start of the first buffer.
 * \param size1     Size of the first buffer in bytes.
 *                  This expression may be evaluated multiple times.
 * \param p2        Pointer to the start of the second buffer.
 * \param size2     Size of the second buffer in bytes.
 *                  This expression may be evaluated multiple times.
 */
#define ASSERT_COMPARE( p1, size1, p2, size2 )                          \
    do                                                                  \
    {                                                                   \
        TEST_ASSERT( ( size1 ) == ( size2 ) );                          \
        if( ( size1 ) != 0 )                                            \
            TEST_ASSERT( memcmp( ( p1 ), ( p2 ), ( size1 ) ) == 0 );    \
    }                                                                   \
    while( 0 )

/**
 * \brief   This macro tests the expression passed to it and skips the
 *          running test if it doesn't evaluate to 'true'.
 *
 * \param   TEST    The test expression to be tested.
 */
#define TEST_ASSUME( TEST )                                 \
    do {                                                    \
        if( ! (TEST) )                                      \
        {                                                   \
            mbedtls_test_skip( #TEST, __LINE__, __FILE__ ); \
            goto exit;                                      \
        }                                                   \
    } while( 0 )

#if defined(MBEDTLS_CHECK_PARAMS) && !defined(MBEDTLS_PARAM_FAILED_ALT)
/**
 * \brief   This macro tests the statement passed to it as a test step or
 *          individual test in a test case. The macro assumes the test will fail
 *          and will generate an error.
 *
 *          It allows a library function to return a value and tests the return
 *          code on return to confirm the given error code was returned.
 *
 *          When MBEDTLS_CHECK_PARAMS is enabled, calls to the parameter failure
 *          callback, MBEDTLS_PARAM_FAILED(), are assumed to indicate the
 *          expected failure, and the test will pass.
 *
 *          This macro is intended for negative parameter validation tests,
 *          where the failing function may return an error value or call
 *          MBEDTLS_PARAM_FAILED() to indicate the error.
 *
 * \param   PARAM_ERROR_VALUE   The expected error code.
 *
 * \param   TEST                The test expression to be tested.
 */
#define TEST_INVALID_PARAM_RET( PARAM_ERR_VALUE, TEST )                 \
    do {                                                                \
        mbedtls_test_param_failed_expect_call( );                       \
        if( ( ( TEST ) != ( PARAM_ERR_VALUE ) ) ||                      \
            ( mbedtls_test_param_failed_check_expected_call( ) != 0 ) ) \
        {                                                               \
            mbedtls_test_fail( #TEST, __LINE__, __FILE__ );             \
            goto exit;                                                  \
        }                                                               \
        mbedtls_test_param_failed_check_expected_call( );               \
   } while( 0 )

/**
 * \brief   This macro tests the statement passed to it as a test step or
 *          individual test in a test case. The macro assumes the test will fail
 *          and will generate an error.
 *
 *          It assumes the library function under test cannot return a value and
 *          assumes errors can only be indicated byt calls to
 *          MBEDTLS_PARAM_FAILED().
 *
 *          When MBEDTLS_CHECK_PARAMS is enabled, calls to the parameter failure
 *          callback, MBEDTLS_PARAM_FAILED(), are assumed to indicate the
 *          expected failure. If MBEDTLS_CHECK_PARAMS is not enabled, no test
 *          can be made.
 *
 *          This macro is intended for negative parameter validation tests,
 *          where the failing function can only return an error by calling
 *          MBEDTLS_PARAM_FAILED() to indicate the error.
 *
 * \param   TEST                The test expression to be tested.
 */
#define TEST_INVALID_PARAM( TEST )                                       \
    do {                                                                 \
        memcpy( jmp_tmp, mbedtls_test_param_failed_get_state_buf( ),     \
                sizeof( jmp_tmp ) );                                     \
        if( setjmp(  mbedtls_test_param_failed_get_state_buf( ) ) == 0 ) \
        {                                                                \
            TEST;                                                        \
            mbedtls_test_fail( #TEST, __LINE__, __FILE__ );              \
            goto exit;                                                   \
        }                                                                \
        mbedtls_test_param_failed_reset_state( );                        \
    } while( 0 )
#endif /* MBEDTLS_CHECK_PARAMS && !MBEDTLS_PARAM_FAILED_ALT */

/**
 * \brief   This macro tests the statement passed to it as a test step or
 *          individual test in a test case. The macro assumes the test will not fail.
 *
 *          It assumes the library function under test cannot return a value and
 *          assumes errors can only be indicated by calls to
 *          MBEDTLS_PARAM_FAILED().
 *
 *          When MBEDTLS_CHECK_PARAMS is enabled, calls to the parameter failure
 *          callback, MBEDTLS_PARAM_FAILED(), are assumed to indicate the
 *          expected failure. If MBEDTLS_CHECK_PARAMS is not enabled, no test
 *          can be made.
 *
 *          This macro is intended to test that functions returning void
 *          accept all of the parameter values they're supposed to accept - eg
 *          that they don't call MBEDTLS_PARAM_FAILED() when a parameter
 *          that's allowed to be NULL happens to be NULL.
 *
 *          Note: for functions that return something other that void,
 *          checking that they accept all the parameters they're supposed to
 *          accept is best done by using TEST_ASSERT() and checking the return
 *          value as well.
 *
 *          Note: this macro is available even when #MBEDTLS_CHECK_PARAMS is
 *          disabled, as it makes sense to check that the functions accept all
 *          legal values even if this option is disabled - only in that case,
 *          the test is more about whether the function segfaults than about
 *          whether it invokes MBEDTLS_PARAM_FAILED().
 *
 * \param   TEST                The test expression to be tested.
 */
#define TEST_VALID_PARAM( TEST )                                    \
    TEST_ASSERT( ( TEST, 1 ) );

#define TEST_HELPER_ASSERT(a) if( !( a ) )                          \
{                                                                   \
    mbedtls_fprintf( stderr, "Assertion Failed at %s:%d - %s\n",    \
                             __FILE__, __LINE__, #a );              \
    mbedtls_exit( 1 );                                              \
}

/** \def ARRAY_LENGTH
 * Return the number of elements of a static or stack array.
 *
 * \param array         A value of array (not pointer) type.
 *
 * \return The number of elements of the array.
 */
/* A correct implementation of ARRAY_LENGTH, but which silently gives
 * a nonsensical result if called with a pointer rather than an array. */
#define ARRAY_LENGTH_UNSAFE( array )            \
    ( sizeof( array ) / sizeof( *( array ) ) )

#if defined(__GNUC__)
/* Test if arg and &(arg)[0] have the same type. This is true if arg is
 * an array but not if it's a pointer. */
#define IS_ARRAY_NOT_POINTER( arg )                                     \
    ( ! __builtin_types_compatible_p( __typeof__( arg ),                \
                                      __typeof__( &( arg )[0] ) ) )
/* A compile-time constant with the value 0. If `const_expr` is not a
 * compile-time constant with a nonzero value, cause a compile-time error. */
#define STATIC_ASSERT_EXPR( const_expr )                                \
    ( 0 && sizeof( struct { unsigned int STATIC_ASSERT : 1 - 2 * ! ( const_expr ); } ) )

/* Return the scalar value `value` (possibly promoted). This is a compile-time
 * constant if `value` is. `condition` must be a compile-time constant.
 * If `condition` is false, arrange to cause a compile-time error. */
#define STATIC_ASSERT_THEN_RETURN( condition, value )   \
    ( STATIC_ASSERT_EXPR( condition ) ? 0 : ( value ) )

#define ARRAY_LENGTH( array )                                           \
    ( STATIC_ASSERT_THEN_RETURN( IS_ARRAY_NOT_POINTER( array ),         \
                                 ARRAY_LENGTH_UNSAFE( array ) ) )

#else
/* If we aren't sure the compiler supports our non-standard tricks,
 * fall back to the unsafe implementation. */
#define ARRAY_LENGTH( array ) ARRAY_LENGTH_UNSAFE( array )
#endif

/** Return the smaller of two values.
 *
 * \param x         An integer-valued expression without side effects.
 * \param y         An integer-valued expression without side effects.
 *
 * \return The smaller of \p x and \p y.
 */
#define MIN( x, y ) ( ( x ) < ( y ) ? ( x ) : ( y ) )

/** Return the larger of two values.
 *
 * \param x         An integer-valued expression without side effects.
 * \param y         An integer-valued expression without side effects.
 *
 * \return The larger of \p x and \p y.
 */
#define MAX( x, y ) ( ( x ) > ( y ) ? ( x ) : ( y ) )

/*
 * 32-bit integer manipulation macros (big endian)
 */
#ifndef GET_UINT32_BE
#define GET_UINT32_BE(n,b,i)                            \
{                                                       \
    (n) = ( (uint32_t) (b)[(i)    ] << 24 )             \
        | ( (uint32_t) (b)[(i) + 1] << 16 )             \
        | ( (uint32_t) (b)[(i) + 2] <<  8 )             \
        | ( (uint32_t) (b)[(i) + 3]       );            \
}
#endif

#ifndef PUT_UINT32_BE
#define PUT_UINT32_BE(n,b,i)                            \
{                                                       \
    (b)[(i)    ] = (unsigned char) ( (n) >> 24 );       \
    (b)[(i) + 1] = (unsigned char) ( (n) >> 16 );       \
    (b)[(i) + 2] = (unsigned char) ( (n) >>  8 );       \
    (b)[(i) + 3] = (unsigned char) ( (n)       );       \
}
#endif

#endif /* TEST_MACROS_H */