/**
 * \file psa/crypto_config.h
 * \brief PSA crypto configuration options (set of defines)
 *
 */
#if defined(MBEDTLS_PSA_CRYPTO_CONFIG)
/**
 * When #MBEDTLS_PSA_CRYPTO_CONFIG is enabled in mbedtls_config.h,
 * this file determines which cryptographic mechanisms are enabled
 * through the PSA Cryptography API (\c psa_xxx() functions).
 *
 * To enable a cryptographic mechanism, uncomment the definition of
 * the corresponding \c PSA_WANT_xxx preprocessor symbol.
 * To disable a cryptographic mechanism, comment out the definition of
 * the corresponding \c PSA_WANT_xxx preprocessor symbol.
 * The names of cryptographic mechanisms correspond to values
 * defined in psa/crypto_values.h, with the prefix \c PSA_WANT_ instead
 * of \c PSA_.
 *
 * Note that many cryptographic mechanisms involve two symbols: one for
 * the key type (\c PSA_WANT_KEY_TYPE_xxx) and one for the algorithm
 * (\c PSA_WANT_ALG_xxx). Mechanisms with additional parameters may involve
 * additional symbols.
 */
#else
/**
 * When \c MBEDTLS_PSA_CRYPTO_CONFIG is disabled in mbedtls_config.h,
 * this file is not used, and cryptographic mechanisms are supported
 * through the PSA API if and only if they are supported through the
 * mbedtls_xxx API.
 */
#endif
/*
 *  Copyright The Mbed TLS Contributors
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */

#ifndef PSA_CRYPTO_CONFIG_H
#define PSA_CRYPTO_CONFIG_H

/*
 * CBC-MAC is not yet supported via the PSA API in Mbed TLS.
 */
//#define PSA_WANT_ALG_CBC_MAC                    1
#define PSA_WANT_ALG_CBC_NO_PADDING             1
#define PSA_WANT_ALG_CBC_PKCS7                  1
#define PSA_WANT_ALG_CCM                        1
#define PSA_WANT_ALG_CMAC                       1
#define PSA_WANT_ALG_CFB                        1
#define PSA_WANT_ALG_CHACHA20_POLY1305          1
#define PSA_WANT_ALG_CMAC                       1
#define PSA_WANT_ALG_CTR                        1
#define PSA_WANT_ALG_DETERMINISTIC_ECDSA        1
#define PSA_WANT_ALG_ECB_NO_PADDING             1
#define PSA_WANT_ALG_ECDH                       1
#define PSA_WANT_ALG_ECDSA                      1
#define PSA_WANT_ALG_GCM                        1
#define PSA_WANT_ALG_HKDF                       1
#define PSA_WANT_ALG_HMAC                       1
#define PSA_WANT_ALG_MD5                        1
#define PSA_WANT_ALG_OFB                        1
/* PBKDF2-HMAC is not yet supported via the PSA API in Mbed TLS.
 * Note: when adding support, also adjust include/mbedtls/config_psa.h */
//#define PSA_WANT_ALG_PBKDF2_HMAC                1
#define PSA_WANT_ALG_RIPEMD160                  1
#define PSA_WANT_ALG_RSA_OAEP                   1
#define PSA_WANT_ALG_RSA_PKCS1V15_CRYPT         1
#define PSA_WANT_ALG_RSA_PKCS1V15_SIGN          1
#define PSA_WANT_ALG_RSA_PSS                    1
#define PSA_WANT_ALG_SHA_1                      1
#define PSA_WANT_ALG_SHA_224                    1
#define PSA_WANT_ALG_SHA_256                    1
#define PSA_WANT_ALG_SHA_384                    1
#define PSA_WANT_ALG_SHA_512                    1
#define PSA_WANT_ALG_STREAM_CIPHER              1
#define PSA_WANT_ALG_TLS12_PRF                  1
#define PSA_WANT_ALG_TLS12_PSK_TO_MS            1
#define PSA_WANT_ALG_XTS                        1

#define PSA_WANT_ECC_BRAINPOOL_P_R1_256         1
#define PSA_WANT_ECC_BRAINPOOL_P_R1_384         1
#define PSA_WANT_ECC_BRAINPOOL_P_R1_512         1
#define PSA_WANT_ECC_MONTGOMERY_255             1
/*
 * Curve448 is not yet supported via the PSA API in Mbed TLS
 * (https://github.com/ARMmbed/mbedtls/issues/4249). Thus, do not enable it by
 * default.
 */
//#define PSA_WANT_ECC_MONTGOMERY_448             1
#define PSA_WANT_ECC_SECP_K1_192                1
/*
 * SECP224K1 is buggy via the PSA API in Mbed TLS
 * (https://github.com/ARMmbed/mbedtls/issues/3541). Thus, do not enable it by
 * default.
 */
//#define PSA_WANT_ECC_SECP_K1_224                1
#define PSA_WANT_ECC_SECP_K1_256                1
#define PSA_WANT_ECC_SECP_R1_192                1
#define PSA_WANT_ECC_SECP_R1_224                1
#define PSA_WANT_ECC_SECP_R1_256                1
#define PSA_WANT_ECC_SECP_R1_384                1
#define PSA_WANT_ECC_SECP_R1_521                1

#define PSA_WANT_KEY_TYPE_DERIVE                1
#define PSA_WANT_KEY_TYPE_HMAC                  1
#define PSA_WANT_KEY_TYPE_AES                   1
#define PSA_WANT_KEY_TYPE_CAMELLIA              1
#define PSA_WANT_KEY_TYPE_CHACHA20              1
#define PSA_WANT_KEY_TYPE_DES                   1
#define PSA_WANT_KEY_TYPE_ECC_KEY_PAIR          1
#define PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY        1
#define PSA_WANT_KEY_TYPE_RAW_DATA              1
#define PSA_WANT_KEY_TYPE_RSA_KEY_PAIR          1
#define PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY        1

#endif /* PSA_CRYPTO_CONFIG_H */