diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index d3e8ddf..a96b8a4 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -4747,7 +4747,6 @@
 # Tests for auth_mode, there are duplicated tests using ca callback for authentication
 # When updating these tests, modify the matching authentication tests accordingly
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server badcert, client required" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4781,7 +4780,6 @@
             -C "X509 - Certificate verification failed" \
             -C "SSL - No CA Chain is set, but required to operate"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server goodcert, client required, no trusted CA" \
             "$P_SRV" \
             "$P_CLI debug_level=3 auth_mode=required ca_file=none ca_path=none" \
@@ -4852,7 +4850,6 @@
             -c "Supported Signature Algorithm found: 4," \
             -c "Supported Signature Algorithm found: 5,"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client has no cert, server required (TLS)" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=none \
@@ -4866,10 +4863,8 @@
             -S "x509_verify_cert() returned" \
             -s "peer has no certificate" \
             -s "! mbedtls_ssl_handshake returned" \
-            -c "! mbedtls_ssl_handshake returned" \
             -s "No client certification received from the client, but required by the authentication mode"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server required" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4885,13 +4880,11 @@
             -s "! The certificate is not correctly signed by the trusted CA" \
             -s "! mbedtls_ssl_handshake returned" \
             -s "send alert level=2 message=48" \
-            -c "! mbedtls_ssl_handshake returned" \
             -s "X509 - Certificate verification failed"
 # We don't check that the client receives the alert because it might
 # detect that its write end of the connection is closed and abort
 # before reading the alert message.
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client cert self-signed and trusted, server required" \
             "$P_SRV debug_level=3 auth_mode=required ca_file=data_files/server5-selfsigned.crt" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4907,7 +4900,6 @@
             -S "! The certificate is not correctly signed" \
             -S "X509 - Certificate verification failed"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client cert not trusted, server required" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4925,7 +4917,6 @@
             -c "! mbedtls_ssl_handshake returned" \
             -s "X509 - Certificate verification failed"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server optional" \
             "$P_SRV debug_level=3 auth_mode=optional" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4943,7 +4934,6 @@
             -C "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server none" \
             "$P_SRV debug_level=3 auth_mode=none" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4961,7 +4951,6 @@
             -C "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client no cert, server optional" \
             "$P_SRV debug_level=3 auth_mode=optional" \
             "$P_CLI debug_level=3 crt_file=none key_file=none" \
@@ -5023,7 +5012,6 @@
 # are in place so that the semantics are consistent with the test description.
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c09.pem \
                     key_file=data_files/dir-maxpath/09.key" \
@@ -5033,7 +5021,6 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int+1 chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -5065,7 +5052,6 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server default" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -5075,7 +5061,6 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server optional" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=optional" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -5085,7 +5070,6 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server required" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -5095,7 +5079,6 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
-requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int chain, server required" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c09.pem \