blob: 183815deca32cb921ad73f0cfd23146f6c9f0db2 [file] [log] [blame]
/**
* \file config-ccm-psk-dtls1_2.h
*
* \brief Small configuration for DTLS 1.2 with PSK and AES-CCM ciphersuites
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Minimal configuration for DTLS 1.2 with PSK and AES-CCM ciphersuites
*
* Distinguishing features:
* - Optimized for small code size, low bandwidth (on an unreliable transport),
* and low RAM usage.
* - No asymmetric cryptography (no certificates, no Diffie-Hellman key
* exchange).
* - Fully modern and secure (provided the pre-shared keys are generated and
* stored securely).
* - Very low record overhead with CCM-8.
* - Includes several optional DTLS features typically used in IoT.
*
* See README.txt for usage instructions.
*/
/* System support */
//#define MBEDTLS_HAVE_TIME /* Optionally used in Hello messages */
/* Other MBEDTLS_HAVE_XXX flags irrelevant for this configuration */
/* Mbed TLS modules */
#define MBEDTLS_AES_C
#define MBEDTLS_CCM_C
#define MBEDTLS_CIPHER_C
#define MBEDTLS_CTR_DRBG_C
#define MBEDTLS_ENTROPY_C
#define MBEDTLS_MD_C
#define MBEDTLS_NET_C
/* The library does not currently support enabling SHA-224 without SHA-256.
* A future version of the library will have this option disabled
* by default. */
#define MBEDTLS_SHA224_C
#define MBEDTLS_SHA256_C
#define MBEDTLS_SSL_CLI_C
#define MBEDTLS_SSL_COOKIE_C
#define MBEDTLS_SSL_SRV_C
#define MBEDTLS_SSL_TLS_C
#define MBEDTLS_TIMING_C
/* TLS protocol feature support */
#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#define MBEDTLS_SSL_PROTO_TLS1_2
#define MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#define MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
/*
* Use only CCM_8 ciphersuites, and
* save ROM and a few bytes of RAM by specifying our own ciphersuite list
*/
#define MBEDTLS_SSL_CIPHERSUITES \
MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8, \
MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8
/*
* Save RAM at the expense of interoperability: do this only if you control
* both ends of the connection! (See comments in "mbedtls/ssl.h".)
* The optimal size here depends on the typical size of records.
*/
#define MBEDTLS_SSL_IN_CONTENT_LEN 256
#define MBEDTLS_SSL_OUT_CONTENT_LEN 256
/* Save RAM at the expense of ROM */
#define MBEDTLS_AES_ROM_TABLES
/* Save some RAM by adjusting to your exact needs */
#define MBEDTLS_PSK_MAX_LEN 16 /* 128-bits keys are generally enough */
/*
* You should adjust this to the exact number of sources you're using: default
* is the "platform_entropy_poll" source, but you may want to add other ones
* Minimum is 2 for the entropy test suite.
*/
#define MBEDTLS_ENTROPY_MAX_SOURCES 2
/* These defines are present so that the config modifying scripts can enable
* them during tests/scripts/test-ref-configs.pl */
//#define MBEDTLS_USE_PSA_CRYPTO
//#define MBEDTLS_PSA_CRYPTO_C
/* Error messages and TLS debugging traces
* (huge code size increase, needed for tests/ssl-opt.sh) */
//#define MBEDTLS_DEBUG_C
//#define MBEDTLS_ERROR_C