blob: 7984ca4b7d926c234635734827a1d00c260c0633 [file] [log] [blame]
/**
* \file poly1305.h
*
* \brief This file contains Poly1305 definitions and functions.
*
* Poly1305 is a one-time message authenticator that can be used to
* authenticate messages. Poly1305-AES was created by Daniel
* Bernstein https://cr.yp.to/mac/poly1305-20050329.pdf The generic
* Poly1305 algorithm (not tied to AES) was also standardized in RFC
* 7539.
*
* \author Daniel King <damaki.gh@gmail.com>
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_POLY1305_H
#define MBEDTLS_POLY1305_H
#include "mbedtls/private_access.h"
#include "mbedtls/build_info.h"
#include <stdint.h>
#include <stddef.h>
#define MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA -0x0057 /**< Invalid input parameter(s). */
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_POLY1305_ALT)
typedef struct mbedtls_poly1305_context
{
uint32_t MBEDTLS_PRIVATE(r)[4]; /** The value for 'r' (low 128 bits of the key). */
uint32_t MBEDTLS_PRIVATE(s)[4]; /** The value for 's' (high 128 bits of the key). */
uint32_t MBEDTLS_PRIVATE(acc)[5]; /** The accumulator number. */
uint8_t MBEDTLS_PRIVATE(queue)[16]; /** The current partial block of data. */
size_t MBEDTLS_PRIVATE(queue_len); /** The number of bytes stored in 'queue'. */
}
mbedtls_poly1305_context;
#else /* MBEDTLS_POLY1305_ALT */
#include "poly1305_alt.h"
#endif /* MBEDTLS_POLY1305_ALT */
/**
* \brief This function initializes the specified Poly1305 context.
*
* It must be the first API called before using
* the context.
*
* It is usually followed by a call to
* \c mbedtls_poly1305_starts(), then one or more calls to
* \c mbedtls_poly1305_update(), then one call to
* \c mbedtls_poly1305_finish(), then finally
* \c mbedtls_poly1305_free().
*
* \param ctx The Poly1305 context to initialize. This must
* not be \c NULL.
*/
void mbedtls_poly1305_init( mbedtls_poly1305_context *ctx );
/**
* \brief This function releases and clears the specified
* Poly1305 context.
*
* \param ctx The Poly1305 context to clear. This may be \c NULL, in which
* case this function is a no-op. If it is not \c NULL, it must
* point to an initialized Poly1305 context.
*/
void mbedtls_poly1305_free( mbedtls_poly1305_context *ctx );
/**
* \brief This function sets the one-time authentication key.
*
* \warning The key must be unique and unpredictable for each
* invocation of Poly1305.
*
* \param ctx The Poly1305 context to which the key should be bound.
* This must be initialized.
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_starts( mbedtls_poly1305_context *ctx,
const unsigned char key[32] );
/**
* \brief This functions feeds an input buffer into an ongoing
* Poly1305 computation.
*
* It is called between \c mbedtls_cipher_poly1305_starts() and
* \c mbedtls_cipher_poly1305_finish().
* It can be called repeatedly to process a stream of data.
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* This must be initialized and bound to a key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `ilen == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_update( mbedtls_poly1305_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function generates the Poly1305 Message
* Authentication Code (MAC).
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* This must be initialized and bound to a key.
* \param mac The buffer to where the MAC is written. This must
* be a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_finish( mbedtls_poly1305_context *ctx,
unsigned char mac[16] );
/**
* \brief This function calculates the Poly1305 MAC of the input
* buffer with the provided key.
*
* \warning The key must be unique and unpredictable for each
* invocation of Poly1305.
*
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `ilen == 0`.
* \param mac The buffer to where the MAC is written. This must be
* a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_mac( const unsigned char key[32],
const unsigned char *input,
size_t ilen,
unsigned char mac[16] );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The Poly1305 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_poly1305_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_POLY1305_H */