This document explains the strategy that was used so far in starting the migration to PSA Crypto and mentions future perspectives and open questions.
Several benefits are expected from migrating to PSA Crypto:
G1. Use PSA Crypto drivers when available. G2. Allow isolation of long-term secrets (for example, private keys). G3. Allow isolation of short-term secrets (for example, TLS session keys). G4. Have a clean, unified API for Crypto (retire the legacy API). G5. Code size: compile out our implementation when a driver is available.
Currently, some parts of (G1) and (G2) are implemented when MBEDTLS_USE_PSA_CRYPTO is enabled. For (G2) to take effect, the application needs to be changed to use new APIs.
Generally speaking, the numbering above doesn‘t mean that each goal requires the preceding ones to be completed, for example G2-G5 could be done in any order; however they all either depend on G1 or are just much more convenient if G1 is done before (note that this is not a dependency on G1 being complete, it’s more like each bit of G2-G5 is helped by some specific bit in G1).
So, a solid intermediate goal would be to complete (G1) when MBEDTLS_USA_PSA_CRYPTO is enabled - that is, all crypto operations in X.509 and TLS would be done via the PSA Crypto API.
We currently have two compile-time options that are relevant to the migration:
MBEDTLS_PSA_CRYPTO_C - enabled by default, controls the presence of the PSA Crypto APIs.MBEDTLS_USE_PSA_CRYPTO - disabled by default (enabled in “full” config), controls usage of PSA Crypto APIs to perform operations in X.509 and TLS (G1 above), as well as the availability of some new APIs (G2 above).The reasons why MBEDTLS_USE_PSA_CRYPTO is optional and disabled by default are:
MBEDTLS_ECP_RESTARTABLE;MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER (fixed early 2022, see https://github.com/Mbed-TLS/mbedtls/issues/5259);MBEDTLS_PSA_CRYPTO_CONFIG (could compile with both of them, but then MBEDTLS_PSA_CRYPTO_CONFIG won't have the desired effect)MBEDTLS_PSA_CRYPTO_C, for backward compatibility reasons:MBEDTLS_PSA_CRYPTO_C is enabled and used, applications need to call psa_crypto_init() before TLS/X.509 uses PSA functionsMBEDTLS_PSA_CRYPTO_C has a hard depend on MBEDTLS_ENTROPY_C || MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG but it‘s currently possible to compilte TLS and X.509 without any of the options. Also, we can’t just auto-enable MBEDTLS_ENTROPY_C as it doesn't build out of the box on all platforms, and even less MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG as it requires a user-provided RNG function.The downside of this approach is that until we feel ready to make MBDEDTLS_USE_PSA_CRYPTO non-optional (always enabled), we have to maintain two versions of some parts of the code: one using PSA, the other using the legacy APIs. However, see next section for strategies that can lower that cost. The rest of this section explains the reasons for the incompatibilities mentioned above.
In the medium term (writing this in early 2020), we're going to look for ways to make MBEDTLS_USE_PSA_CRYPTO non-optional (always enabled).
MBEDTLS_ECP_RESTARTABLECurrently this option controls not only the presence of restartable APIs in the crypto library, but also their use in the TLS and X.509 layers. Since PSA Crypto does not support restartable operations, there‘s a clear conflict: the TLS and X.509 layers can’t both use only PSA APIs and get restartable behaviour.
Supporting this in PSA is on our roadmap (it‘s been requested). But it’s way below generalizing support for MBEDTLS_USE_PSA_CRYPTO for “mainstream” use cases on our priority list. So in the medium term MBEDTLS_ECP_RESTARTABLE is incompatible with MBEDTLS_USE_PSA_CRYPTO.
Note: it is possible to make the options compatible at build time simply by deciding that when USE_PSA_CRYPTO is enabled, PSA APIs are used except if restartable behaviour was requested at run-time (in addition to enabling MBEDTLS_ECP_RESTARTABLE in the build).
MBEDTLS_PSA_CRYPTO_CONFIG(This section taken from a comment by Gilles.)
X509 and TLS code use MBEDTLS_xxx macros to decide whether an algorithm is supported. This doesn't make MBEDTLS_USE_PSA_CRYPTO incompatible with MBEDTLS_PSA_CRYPTO_CONFIG per se, but it makes it incompatible with most useful uses of MBEDTLS_PSA_CRYPTO_CONFIG. The point of MBEDTLS_PSA_CRYPTO_CONFIG is to be able to build a library with support for an algorithm through a PSA driver only, without building the software implementation of that algorithm. But then the TLS code would consider the algorithm unavailable.
This is tracked in https://github.com/Mbed-TLS/mbedtls/issues/3674 and https://github.com/Mbed-TLS/mbedtls/issues/3677. But now that I look at it with fresh eyes, I don't think the approach we were planning to use would actually works. This needs more design effort.
This is something we need to support eventually, and several partners want it. I don‘t know what the priority is for MBEDTLS_USE_PSA_CRYPTO between improving driver support and covering more of the protocol. It seems to me that it’ll be less work overall to first implement a good architecture for MBEDTLS_USE_PSA_CRYPTO + MBEDTLS_PSA_CRYPTO_CONFIG and then extend to more protocol features, because implementing that architecture will require changes to the existing code and the less code there is at this point the better, whereas extending to more protocol features will require the same amount of work either way.
psa_crypto_init() before using TLS, X.509 or PK. We can try to work around that by calling (the relevant part of) it ourselves under the hood as needed, but that would likely require splitting init between the parts that can fail and the parts that can't (see https://github.com/ARM-software/psa-crypto-api/pull/536 for that).MBEDTLS_PSA_CRYPTO_C in configurations that don’t have MBEDTLS_ENTROPY_C, and we can‘t just auto-enable the latter, as it won’t build or work out of the box on all platforms. There are two kinds of things we'd need to do if we want to work around that:ENTROPY_C. This requires going through the PSA code base to adjust dependencies. Risk: there may be annoying dependencies, some of which may be surprising.f_rng parameter (see #5238), that would be available in entropy-less builds. (Then code using those functions still needs to have one version using it, for entropy-less builds, and one version using the standard function, for driver support in build with entropy.)See https://github.com/Mbed-TLS/mbedtls/issues/5156
The Crypto library in Mbed TLS currently has 3 abstraction layers that offer algorithm-agnostic APIs for a class of algorithms:
Note: key exchange (FFDH, ECDH) is not covered by an abstraction layer.
These abstraction layers typically provide, in addition to the API for crypto operations, types and numerical identifiers for algorithms (for example mbedtls_cipher_mode_t and its values). The current strategy is to keep using those identifiers in most of the code, in particular in existing structures and public APIs, even when MBEDTLS_USE_PSA_CRYPTO is enabled. (This is not an issue for G1, G2, G3 above, and is only potentially relevant for G4.)
The are multiple strategies that can be used regarding the place of those layers in the migration to PSA.
USE_PSA_CRYPTO) of wrapper functions in the abstraction layer, that calls PSA instead of the legacy crypto API.This strategy is currently (late 2021) used for ECDSA signature verification in the PK layer, and could be extended to all operations in the PK layer.
This strategy is not very well suited to the Cipher layer, as the PSA implementation is currently done on top of that layer.
This strategy will probably be used for some time for the PK layer, while we figure out what the future of that layer is: parts of it (parse/write, ECDSA signatures in the format that X.509 & TLS want) are not covered by PSA, so they will need to keep existing in some way. Also the PK layer is also a good place for dispatching to either PSA or mbedtls_xxx_restartable while that part is not covered by PSA yet.
USE_PSA_CRYPTO)This strategy is currently (late 2021) used for the MD layer. (Currently only a subset of calling places, but will be extended to all of them.)
In the future (early 2022) we're going to use it for the Cipher layer as well.
mbedtls_pk_context).This strategy is not useful when no context is used, for example with the one-shot function mbedtls_md().
There are two variants of this strategy: one where using the new setup function also allows for key isolation (the key is only held by PSA, supporting both G1 and G2 in that area), and one without isolation (the key is still stored outside of PSA most of the time, supporting only G1).
This strategy, with support for key isolation, is currently (end of 2021) used for ECDSA signature generation in the PK layer - see mbedtls_pk_setup_opaque(). This allows use of PSA-held private ECDSA keys in TLS and X.509 with no change to the TLS/X.509 code, but a contained change in the application. If could be extended to other private key operations in the PK layer, which is the plan as of early 2022.
This strategy, without key isolation, is also currently used in the Cipher layer - see mbedtls_cipher_setup_psa(). This allows use of PSA for cipher operations in TLS with no change to the application code, and a contained change in TLS code. (It currently only supports a subset of ciphers.) However, we'll move to the “Replace calls for each operation” strategy (early 2022), in the hope of being able to build without this layer in order to save some code size in the future.
Note: for private key operations in the PK layer, both the “silent” and the “opt-in” strategy can apply, and can complement each other, as one provides support for key isolation, but at the (unavoidable) code of change in application code, while the other requires no application change to get support for drivers, but fails to provide isolation support.
Strategies currently used with each abstraction layer:
This section briefly introduces questions and possible plans towards G4, mainly as they relate to choices in previous stages.
We‘re currently taking advantage of the existing PK and Cipher layers in order to reduce the number of places where library code needs to be changed. It’s only natural to consider using the same strategy (with the PK, MD and Cipher layers) for facilitating migration of application code.
Note: a necessary first step for that would be to make sure PSA is no longer implemented of top of the concerned layers
The most favourable case is if we can have a zero-cost abstraction (no runtime, RAM usage or code size penalty), for example just a bunch of #defines, essentially mapping mbedtls_ APIs to their psa_ equivalent.
Unfortunately that's unlikely fully work. For example, the MD layer uses the same context type for hashes and HMACs, while the PSA API (rightfully) has distinct operation types. Similarly, the Cipher layer uses the same context type for unauthenticated and AEAD ciphers, which again the PSA API distinguishes.
It is unclear how much value, if any, a zero-cost compatibility layer that's incomplete (for example, for MD covering only hashes, or for Cipher covering only AEAD) or differs significantly from the existing API (for example, introducing new context types) would provide to users.
Another possibility is to keep most or all of the existing API for the PK, MD and Cipher layers, implemented on top of PSA, aiming for the lowest possible cost. For example, mbedtls_md_context_t would be defined as a (tagged) union of psa_hash_operation_t and psa_mac_operation_t, then mbedtls_md_setup() would initialize the correct part, and the rest of the functions be simple wrappers around PSA functions. This would vastly reduce the complexity of the layers compared to the existing (no need to dispatch through function pointers, just call the corresponding PSA API).
Since this would still represent a non-zero cost, not only in terms of code size, but also in terms of maintenance (testing, etc.) this would probably be a temporary solution: for example keep the compatibility layers in 4.0 (and make them optional), but remove them in 5.0.
Again, this provides the most value to users if we can manage to keep the existing API unchanged. Their might be conflicts between this goal and that of reducing the cost, and judgment calls may need to be made.
Note: when it comes to holding public keys in the PK layer, depending on how the rest of the code is structured, it may be worth holding the key data in memory controlled by the PK layer as opposed to a PSA key slot, moving it to a slot only when needed (see current ecdsa_verify_wrap when MBEDTLS_USE_PSA_CRYPTO is defined) For example, when parsing a large number, N, of X.509 certificates (for example the list of trusted roots), it might be undesirable to use N PSA key slots for their public keys as long as the certs are loaded. OTOH, this could also be addressed by merging the “X.509 parsing on-demand” (#2478), and then the public key data would be held as bytes in the X.509 CRT structure, and only moved to a PK context / PSA slot when it's actually used.
Note: the PK layer actually consists of two relatively distinct parts: crypto operations, which will be covered by PSA, and parsing/writing (exporting) from/to various formats, which is currently not fully covered by the PSA Crypto API.
It should be easy to provide the user with a bunch of #defines for algorithm identifiers, for example #define MBEDTLS_MD_SHA256 PSA_ALG_SHA_256; most of those would be in the MD, Cipher and PK compatibility layers mentioned above, but there might be some in other modules that may be worth considering, for example identifiers for elliptic curves.
Generally speaking, we would retire all of the low-level, non-generic modules, such as AES, SHA-256, RSA, DHM, ECDH, ECP, bignum, etc, without providing compatibility APIs for them. People would be encouraged to switch to the PSA API. (The compatibility implementation of the existing PK, MD, Cipher APIs would mostly benefit people who already used those generic APis rather than the low-level, alg-specific ones.)
Public APIs in TLS and X.509 may be affected by the migration in at least two ways:
APIs that rely on a legacy mbedtls_ crypto type: for example mbedtls_ssl_conf_own_cert() to configure a (certificate and the associated) private key. Currently the private key is passed as a mbedtls_pk_context object, which would probably change to a psa_key_id_t. Since some users would probably still be using the compatibility PK layer, it would need a way to easily extract the PSA key ID from the PK context.
APIs the accept list of identifiers: for example mbedtls_ssl_conf_curves() taking a list of mbedtls_ecp_group_ids. This could be changed to accept a list of pairs (psa_ecc_familiy_t, size) but we should probably take this opportunity to move to a identifier independent from the underlying crypto implementation and use TLS-specific identifiers instead (based on IANA values or custom enums), as is currently done in the new mbedtls_ssl_conf_groups() API, see #4859).
An question that needs careful consideration when we come around to removing the low-level crypto APIs and making PK, MD and Cipher optional compatibility layers is to be sure to preserve testing quality. A lot of the existing test cases use the low level crypto APIs; we would need to either keep using that API for tests, or manually migrated test to the PSA Crypto API. Perhaps a combination of both, perhaps evolving gradually over time.