FreeRTOS/Demo/CORTEX_LM3S102_Rowley/Demo3/main.c

/*
    FreeRTOS V9.0.0rc2 - Copyright (C) 2016 Real Time Engineers Ltd.
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.

    ***************************************************************************
    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
    >>!   distribute a combined work that includes FreeRTOS without being   !<<
    >>!   obliged to provide the source code for proprietary components     !<<
    >>!   outside of the FreeRTOS kernel.                                   !<<
    ***************************************************************************

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
    link: http://www.freertos.org/a00114.html

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that is more than just the market leader, it     *
     *    is the industry's de facto standard.                               *
     *                                                                       *
     *    Help yourself get started quickly while simultaneously helping     *
     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
     *    tutorial book, reference manual, or both:                          *
     *    http://www.FreeRTOS.org/Documentation                              *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
    the FAQ page "My application does not run, what could be wrong?".  Have you
    defined configASSERT()?

    http://www.FreeRTOS.org/support - In return for receiving this top quality
    embedded software for free we request you assist our global community by
    participating in the support forum.

    http://www.FreeRTOS.org/training - Investing in training allows your team to
    be as productive as possible as early as possible.  Now you can receive
    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
    Ltd, and the world's leading authority on the world's leading RTOS.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.

    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and commercial middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/


/*
 * This is a mini co-routine demo for the Rowley CrossFire LM3S102 development
 * board.  It makes use of the boards tri-colour LED and analogue input.
 *
 * Four co-routines are created - an 'I2C' co-routine and three 'flash'
 * co-routines.
 *
 * The I2C co-routine triggers an ADC conversion then blocks on a queue to 
 * wait for the conversion result - which it receives on the queue directly
 * from the I2C interrupt service routine.  The conversion result is then
 * scalled to a delay period.  The I2C interrupt then wakes each of the 
 * flash co-routines before itself delaying for the calculated period and
 * then repeating the whole process.
 *
 * When woken by the I2C co-routine the flash co-routines each block for 
 * a given period, illuminate an LED for a fixed period, then go back to
 * sleep to wait for the next cycle.  The uxIndex parameter of the flash
 * co-routines is used to ensure that each flashes a different LED, and that
 * the delay periods are such that the LED's get flashed in sequence.
 */


/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "croutine.h"

/* Demo application include files. */
#include "partest.h"

/* Library include files. */
#include "DriverLib.h"

/* States of the I2C master interface. */
#define mainI2C_IDLE       0
#define mainI2C_READ_1     1
#define mainI2C_READ_2     2
#define mainI2C_READ_DONE  3

#define mainZERO_LENGTH 0

/* Address of the A2D IC on the CrossFire board. */
#define mainI2CAddress	0x4D

/* The queue used to send data from the I2C ISR to the co-routine should never
contain more than one item as the same co-routine is used to trigger the I2C
activity. */
#define mainQUEUE_LENGTH 1

/* The CrossFire board contains a tri-colour LED. */
#define mainNUM_LEDs	3

/* The I2C co-routine has a higher priority than the flash co-routines.  This
is not really necessary as when the I2C co-routine is active the other 
co-routines are delaying. */
#define mainI2c_CO_ROUTINE_PRIORITY 1


/* The current state of the I2C master. */
static volatile unsigned portBASE_TYPE uxState = mainI2C_IDLE;

/* The delay period derived from the A2D value. */
static volatile portBASE_TYPE uxDelay = 250;

/* The queue used to communicate between the I2C interrupt and the I2C 
co-routine. */
static QueueHandle_t xADCQueue;

/* The queue used to synchronise the flash co-routines. */
static QueueHandle_t xDelayQueue;

/*
 * Sets up the PLL, I2C and GPIO used by the demo.
 */
static void prvSetupHardware( void );

/* The co-routines as described at the top of the file. */
static void vI2CCoRoutine( CoRoutineHandle_t xHandle, unsigned portBASE_TYPE uxIndex );
static void vFlashCoRoutine( CoRoutineHandle_t xHandle, unsigned portBASE_TYPE uxIndex );

/*-----------------------------------------------------------*/

int main( void )
{
unsigned portBASE_TYPE uxCoRoutine;

	/* Setup all the hardware used by this demo. */
	prvSetupHardware();

	/* Create the queue used to communicate between the ISR and I2C co-routine.
	This can only ever contain one value. */
	xADCQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( TickType_t ) );

	/* Create the queue used to synchronise the flash co-routines.  The queue
	is used to trigger three tasks, but is for synchronisation only and does
	not pass any data.  It therefore has three position each of zero length. */
	xDelayQueue = xQueueCreate( mainNUM_LEDs, mainZERO_LENGTH );

	/* Create the co-routine that initiates the i2c. */
	xCoRoutineCreate( vI2CCoRoutine, mainI2c_CO_ROUTINE_PRIORITY, 0 );

	/* Create the flash co-routines. */
	for( uxCoRoutine = 0; uxCoRoutine < mainNUM_LEDs; uxCoRoutine++ )
	{
		xCoRoutineCreate( vFlashCoRoutine, tskIDLE_PRIORITY, uxCoRoutine );        
	}

	/* Start the scheduler.  From this point on the co-routines should 
	execute. */
	vTaskStartScheduler();

	/* Should not get here unless we did not have enough memory to start the
	scheduler. */
	for( ;; );
	return 0;
}
/*-----------------------------------------------------------*/

static void prvSetupHardware( void )
{
	/* Setup the PLL. */
	SysCtlClockSet( SYSCTL_SYSDIV_10 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN | SYSCTL_XTAL_6MHZ );

	/* Enable the I2C used to read the pot. */
	SysCtlPeripheralEnable( SYSCTL_PERIPH_I2C );
	SysCtlPeripheralEnable( SYSCTL_PERIPH_GPIOB );
	GPIOPinTypeI2C( GPIO_PORTB_BASE, GPIO_PIN_2 | GPIO_PIN_3 );

	/* Initialize the I2C master. */
	I2CMasterInit( I2C_MASTER_BASE, pdFALSE );
	
	/* Enable the I2C master interrupt. */
	I2CMasterIntEnable( I2C_MASTER_BASE );
    IntEnable( INT_I2C );

	/* Initialise the hardware used to talk to the LED's. */
	vParTestInitialise();
}
/*-----------------------------------------------------------*/

static void vI2CCoRoutine( CoRoutineHandle_t xHandle, unsigned portBASE_TYPE uxIndex )
{
TickType_t xADCResult;
static portBASE_TYPE xResult = 0, xMilliSecs, xLED;

	crSTART( xHandle );

	for( ;; )
	{
		/* Start the I2C off to read the ADC. */
		uxState = mainI2C_READ_1;
		I2CMasterSlaveAddrSet( I2C_MASTER_BASE, mainI2CAddress, pdTRUE );		
		I2CMasterControl( I2C_MASTER_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START );

		/* Wait to receive the conversion result. */
		crQUEUE_RECEIVE( xHandle, xADCQueue, &xADCResult, portMAX_DELAY, &xResult );

		/* Scale the result to give a useful range of values for a visual 
		demo. */
		xADCResult >>= 2;
		xMilliSecs = xADCResult / portTICK_PERIOD_MS;

		/* The delay is split between the four co-routines so they remain in
		synch. */
		uxDelay = xMilliSecs / ( mainNUM_LEDs + 1 );

		/* Trigger each of the flash co-routines. */
		for( xLED = 0; xLED < mainNUM_LEDs; xLED++ )
		{
			crQUEUE_SEND( xHandle, xDelayQueue, &xLED, 0, &xResult );
		}

		/* Wait for the full delay time then start again.  This delay is long 
		enough to ensure the flash co-routines have done their thing and gone
		back to sleep. */
		crDELAY( xHandle, xMilliSecs );
	}

	crEND();
}
/*-----------------------------------------------------------*/

static void vFlashCoRoutine( CoRoutineHandle_t xHandle, unsigned portBASE_TYPE uxIndex )
{
portBASE_TYPE xResult, xNothing;

	crSTART( xHandle );

	for( ;; )
	{
		/* Wait for start of next round. */
		crQUEUE_RECEIVE( xHandle, xDelayQueue, &xNothing, portMAX_DELAY, &xResult );

		/* Wait until it is this co-routines turn to flash. */
		crDELAY( xHandle, uxDelay * uxIndex );

		/* Turn on the LED for a fixed period. */
		vParTestSetLED( uxIndex, pdTRUE );
		crDELAY( xHandle, uxDelay );
		vParTestSetLED( uxIndex, pdFALSE );

		/* Go back and wait for the next round. */
	}

	crEND();
}
/*-----------------------------------------------------------*/

void vI2C_ISR(void)
{
static TickType_t xReading;

	/* Clear the interrupt. */
	I2CMasterIntClear( I2C_MASTER_BASE );

	/* Determine what to do based on the current uxState. */
	switch (uxState)
	{
		case mainI2C_IDLE:		break;
	
		case mainI2C_READ_1:	/* Read ADC result high byte. */
								xReading = I2CMasterDataGet( I2C_MASTER_BASE );
								xReading <<= 8;
		
								/* Continue the burst read. */
								I2CMasterControl( I2C_MASTER_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT );
								uxState = mainI2C_READ_2;
								break;
	
		case mainI2C_READ_2:	/* Read ADC result low byte. */
								xReading |= I2CMasterDataGet( I2C_MASTER_BASE );								
			
								/* Finish the burst read. */
								I2CMasterControl( I2C_MASTER_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH );
								uxState = mainI2C_READ_DONE;
								break;
			
		case mainI2C_READ_DONE:	/* Complete. */
								I2CMasterDataGet( I2C_MASTER_BASE );
								uxState = mainI2C_IDLE;

								/* Send the result to the co-routine. */
                                crQUEUE_SEND_FROM_ISR( xADCQueue, &xReading, pdFALSE );
								break;
	}
}
/*-----------------------------------------------------------*/

void vApplicationIdleHook( void )
{
	for( ;; )
	{
		vCoRoutineSchedule();
	}
}