/*
    FreeRTOS V7.6.0 - Copyright (C) 2013 Real Time Engineers Ltd. 
    All rights reserved

    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.

    ***************************************************************************
     *                                                                       *
     *    FreeRTOS provides completely free yet professionally developed,    *
     *    robust, strictly quality controlled, supported, and cross          *
     *    platform software that has become a de facto standard.             *
     *                                                                       *
     *    Help yourself get started quickly and support the FreeRTOS         *
     *    project by purchasing a FreeRTOS tutorial book, reference          *
     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
     *                                                                       *
     *    Thank you!                                                         *
     *                                                                       *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.

    >>! NOTE: The modification to the GPL is included to allow you to distribute
    >>! a combined work that includes FreeRTOS without being obliged to provide
    >>! the source code for proprietary components outside of the FreeRTOS
    >>! kernel.

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
    link: http://www.freertos.org/a00114.html

    1 tab == 4 spaces!

    ***************************************************************************
     *                                                                       *
     *    Having a problem?  Start by reading the FAQ "My application does   *
     *    not run, what could be wrong?"                                     *
     *                                                                       *
     *    http://www.FreeRTOS.org/FAQHelp.html                               *
     *                                                                       *
    ***************************************************************************

    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
    license and Real Time Engineers Ltd. contact details.

    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
    compatible FAT file system, and our tiny thread aware UDP/IP stack.

    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
    licenses offer ticketed support, indemnification and middleware.

    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
    engineered and independently SIL3 certified version for use in safety and
    mission critical applications that require provable dependability.

    1 tab == 4 spaces!
*/


/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.

NOTE:  This driver is primarily to test the scheduler functionality.  It does
not effectively use the buffers or DMA and is therefore not intended to be
an example of an efficient driver. */

/* Standard include file. */
#include <stdlib.h>

/* Scheduler include files. */
#include "FreeRTOS.h"
#include "queue.h"
#include "task.h"

/* Demo app include files. */
#include "serial.h"

/* Hardware definitions. */
#define serNO_PARITY		( ( unsigned portCHAR ) 0x02 << 3 )
#define ser8DATA_BITS		( ( unsigned portCHAR ) 0x03 )
#define ser1STOP_BIT		( ( unsigned portCHAR ) 0x07 )
#define serSYSTEM_CLOCK		( ( unsigned portCHAR ) 0xdd )
#define serTX_ENABLE		( ( unsigned portCHAR ) 0x04 )
#define serRX_ENABLE		( ( unsigned portCHAR ) 0x01 )
#define serTX_INT			( ( unsigned portCHAR ) 0x01 )
#define serRX_INT			( ( unsigned portCHAR ) 0x02 )


/* The queues used to communicate between tasks and ISR's. */
static xQueueHandle xRxedChars;
static xQueueHandle xCharsForTx;

/* Flag used to indicate the tx status. */
static portBASE_TYPE xTxHasEnded = pdTRUE;

/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
const unsigned portLONG ulBaudRateDivisor = ( configCPU_CLOCK_HZ / ( 32UL * ulWantedBaud ) );

	/* Create the queues used by the com test task. */
	xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
	xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );

	xTxHasEnded = pdTRUE;

	/* Set the pins to UART mode. */
	MCF_GPIO_PUAPAR |= MCF_GPIO_PUAPAR_UTXD0_UTXD0;
	MCF_GPIO_PUAPAR |= MCF_GPIO_PUAPAR_URXD0_URXD0;

	/* Reset the peripheral. */
	MCF_UART0_UCR = MCF_UART_UCR_RESET_RX;
	MCF_UART0_UCR = MCF_UART_UCR_RESET_TX;
	MCF_UART0_UCR = MCF_UART_UCR_RESET_ERROR;
	MCF_UART0_UCR = MCF_UART_UCR_RESET_BKCHGINT;
	MCF_UART0_UCR = MCF_UART_UCR_RESET_MR | MCF_UART_UCR_RX_DISABLED | MCF_UART_UCR_TX_DISABLED;

	/* Configure the UART. */
	MCF_UART0_UMR1 = serNO_PARITY | ser8DATA_BITS;
	MCF_UART0_UMR2 = ser1STOP_BIT;
	MCF_UART0_UCSR = serSYSTEM_CLOCK;

	MCF_UART0_UBG1 = ( unsigned portCHAR ) ( ( ulBaudRateDivisor >> 8UL ) & 0xffUL );
	MCF_UART0_UBG2 = ( unsigned portCHAR ) ( ulBaudRateDivisor & 0xffUL );

	/* Turn it on. */
	MCF_UART0_UCR = serTX_ENABLE | serRX_ENABLE;

	/* Configure the interrupt controller.  Run the UARTs above the kernel
	interrupt priority for demo purposes. */
    MCF_INTC0_ICR13 = ( ( configMAX_SYSCALL_INTERRUPT_PRIORITY - 1  ) << 3 );
    MCF_INTC0_IMRL &= ~( MCF_INTC_IMRL_INT_MASK13 | 0x01 );

	/* The Tx interrupt is not enabled until there is data to send. */
	MCF_UART0_UIMR = serRX_INT;

	/* Only a single port is implemented so we don't need to return anything. */
	return NULL;
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
{
	/* Only one port is supported. */
	( void ) pxPort;

	/* Get the next character from the buffer.  Return false if no characters
	are available or arrive before xBlockTime expires. */
	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
	{
		return pdTRUE;
	}
	else
	{
		return pdFALSE;
	}
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
{
	/* Only one port is supported. */
	( void ) pxPort;

	/* Return false if after the block time there is no room on the Tx queue. */
	if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
	{
		return pdFAIL;
	}

	/* A critical section should not be required as xTxHasEnded will not be
	written to by the ISR if it is already 0 (is this correct?). */
	if( xTxHasEnded != pdFALSE )
	{
		xTxHasEnded = pdFALSE;
		MCF_UART0_UIMR = serRX_INT | serTX_INT;
	}

	return pdPASS;
}
/*-----------------------------------------------------------*/

void vSerialClose( xComPortHandle xPort )
{
	( void ) xPort;
}
/*-----------------------------------------------------------*/

__declspec(interrupt:0) void vUART0InterruptHandler( void )
{
unsigned portCHAR ucChar;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE, xDoneSomething = pdTRUE;

	while( xDoneSomething != pdFALSE )
	{
		xDoneSomething = pdFALSE;

		/* Does the tx buffer contain space? */
		if( ( MCF_UART0_USR & MCF_UART_USR_TXRDY ) != 0x00 )
		{
			/* Are there any characters queued to be sent? */
			if( xQueueReceiveFromISR( xCharsForTx, &ucChar, &xHigherPriorityTaskWoken ) == pdTRUE )
			{
				/* Send the next char. */
				MCF_UART0_UTB = ucChar;
				xDoneSomething = pdTRUE;
			}
			else
			{
				/* Turn off the Tx interrupt until such time as another character
				is being transmitted. */
				MCF_UART0_UIMR = serRX_INT;
				xTxHasEnded = pdTRUE;
			}
		}

		if( MCF_UART0_USR & MCF_UART_USR_RXRDY )
		{
			ucChar = MCF_UART0_URB;
			xQueueSendFromISR( xRxedChars, &ucChar, &xHigherPriorityTaskWoken );
			xDoneSomething = pdTRUE;
		}
	}

    portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
}