/*
 * FreeRTOS Kernel V10.0.1
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

/*
 * This file initialises three timers as follows:
 *
 * Timer 0 and Timer 1 provide the interrupts that are used with the IntQ
 * standard demo tasks, which test interrupt nesting and using queues from
 * interrupts.  Both these interrupts operate below the maximum syscall
 * interrupt priority.
 *
 * Timer 2 is a much higher frequency timer that tests the nesting of interrupts
 * that execute above the maximum syscall interrupt priority.
 *
 * All the timers can nest with the tick interrupt - creating a maximum
 * interrupt nesting depth of 4.
 *
 * For convenience, the high frequency timer is also used to provide the time
 * base for the run time stats.
 */

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Demo includes. */
#include "IntQueueTimer.h"
#include "IntQueue.h"

/* Xilinx includes. */
#include "xttcps.h"
#include "xscugic.h"

/* The frequencies at which the first two timers expire are slightly offset to
ensure they don't remain synchronised.  The frequency of the interrupt that
operates above the max syscall interrupt priority is 10 times faster so really
hammers the interrupt entry and exit code. */
#define tmrTIMERS_USED	3
#define tmrTIMER_0_FREQUENCY	( 2000UL )
#define tmrTIMER_1_FREQUENCY	( 2001UL )
#define tmrTIMER_2_FREQUENCY	( 20000UL )

/*-----------------------------------------------------------*/

/*
 * The single interrupt service routines that is used to service all three
 * timers.
 */
static void prvTimerHandler( void *CallBackRef );

/*-----------------------------------------------------------*/

/* Hardware constants. */
static const BaseType_t xDeviceIDs[ tmrTIMERS_USED ] = { XPAR_XTTCPS_2_DEVICE_ID, XPAR_XTTCPS_3_DEVICE_ID, XPAR_XTTCPS_4_DEVICE_ID };
static const BaseType_t xInterruptIDs[ tmrTIMERS_USED ] = { XPAR_XTTCPS_2_INTR, XPAR_XTTCPS_3_INTR, XPAR_XTTCPS_4_INTR };

/* Timer configuration settings. */
typedef struct
{
	uint32_t OutputHz;	/* Output frequency. */
	uint16_t Interval;	/* Interval value. */
	uint8_t Prescaler;	/* Prescaler value. */
	uint16_t Options;	/* Option settings. */
} TmrCntrSetup;

static TmrCntrSetup xTimerSettings[ tmrTIMERS_USED ] =
{
	{ tmrTIMER_0_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE },
	{ tmrTIMER_1_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE },
	{ tmrTIMER_2_FREQUENCY, 0, 0, XTTCPS_OPTION_INTERVAL_MODE | XTTCPS_OPTION_WAVE_DISABLE }
};

/* Lower priority number means higher logical priority, so
configMAX_API_CALL_INTERRUPT_PRIORITY - 1 is above the maximum system call
interrupt priority. */
static const UBaseType_t uxInterruptPriorities[ tmrTIMERS_USED ] =
{
	configMAX_API_CALL_INTERRUPT_PRIORITY + 1,
	configMAX_API_CALL_INTERRUPT_PRIORITY,
	configMAX_API_CALL_INTERRUPT_PRIORITY - 1
};

static XTtcPs xTimerInstances[ tmrTIMERS_USED ];

/* Used to provide a means of ensuring the intended interrupt nesting depth is
actually being reached. */
extern uint32_t ulPortInterruptNesting;
static uint32_t ulMaxRecordedNesting = 0;

/* Used to ensure the high frequency timer is running at the expected
frequency. */
static volatile uint32_t ulHighFrequencyTimerCounts = 0;

/*-----------------------------------------------------------*/

void vInitialiseTimerForIntQueueTest( void )
{
BaseType_t xStatus;
TmrCntrSetup *pxTimerSettings;
extern XScuGic xInterruptController;
BaseType_t xTimer;
XTtcPs *pxTimerInstance;
XTtcPs_Config *pxTimerConfiguration;
const uint8_t ucRisingEdge = 3;

	for( xTimer = 0; xTimer < tmrTIMERS_USED; xTimer++ )
	{
		/* Look up the timer's configuration. */
		pxTimerInstance = &( xTimerInstances[ xTimer ] );
		pxTimerConfiguration = XTtcPs_LookupConfig( xDeviceIDs[ xTimer ] );
		configASSERT( pxTimerConfiguration );

		pxTimerSettings = &( xTimerSettings[ xTimer ] );

		/* Initialise the device. */
		xStatus = XTtcPs_CfgInitialize( pxTimerInstance, pxTimerConfiguration, pxTimerConfiguration->BaseAddress );
		if( xStatus != XST_SUCCESS )
		{
			/* Not sure how to do this before XTtcPs_CfgInitialize is called
			as pxTimerInstance is set within XTtcPs_CfgInitialize(). */
			XTtcPs_Stop( pxTimerInstance );
			xStatus = XTtcPs_CfgInitialize( pxTimerInstance, pxTimerConfiguration, pxTimerConfiguration->BaseAddress );
			configASSERT( xStatus == XST_SUCCESS );
		}

		/* Set the options. */
		XTtcPs_SetOptions( pxTimerInstance, pxTimerSettings->Options );

		/* The timer frequency is preset in the pxTimerSettings structure.
		Derive the values for the other structure members. */
		XTtcPs_CalcIntervalFromFreq( pxTimerInstance, pxTimerSettings->OutputHz, &( pxTimerSettings->Interval ), &( pxTimerSettings->Prescaler ) );

		/* Set the interval and prescale. */
		XTtcPs_SetInterval( pxTimerInstance, pxTimerSettings->Interval );
		XTtcPs_SetPrescaler( pxTimerInstance, pxTimerSettings->Prescaler );

		/* The priority must be the lowest possible. */
		XScuGic_SetPriorityTriggerType( &xInterruptController, xInterruptIDs[ xTimer ], uxInterruptPriorities[ xTimer ] << portPRIORITY_SHIFT, ucRisingEdge );

		/* Connect to the interrupt controller. */
		xStatus = XScuGic_Connect( &xInterruptController, xInterruptIDs[ xTimer ], ( Xil_InterruptHandler ) prvTimerHandler, ( void * ) pxTimerInstance );
		configASSERT( xStatus == XST_SUCCESS);

		/* Enable the interrupt in the GIC. */
		XScuGic_Enable( &xInterruptController, xInterruptIDs[ xTimer ] );

		/* Enable the interrupts in the timer. */
		XTtcPs_EnableInterrupts( pxTimerInstance, XTTCPS_IXR_INTERVAL_MASK );

		/* Start the timer. */
		XTtcPs_Start( pxTimerInstance );
	}
}
/*-----------------------------------------------------------*/

static void prvTimerHandler( void *pvCallBackRef )
{
uint32_t ulInterruptStatus;
XTtcPs *pxTimer = ( XTtcPs * ) pvCallBackRef;
BaseType_t xYieldRequired;

	/* Read the interrupt status, then write it back to clear the interrupt. */
	ulInterruptStatus = XTtcPs_GetInterruptStatus( pxTimer );
	XTtcPs_ClearInterruptStatus( pxTimer, ulInterruptStatus );

	/* Only one interrupt event type is expected. */
	configASSERT( ( XTTCPS_IXR_INTERVAL_MASK & ulInterruptStatus ) != 0 );

	/* Check the device ID to know which IntQueue demo to call. */
	if( pxTimer->Config.DeviceId == xDeviceIDs[ 0 ] )
	{
		xYieldRequired = xFirstTimerHandler();
	}
	else if( pxTimer->Config.DeviceId == xDeviceIDs[ 1 ] )
	{
		xYieldRequired = xSecondTimerHandler();
	}
	else
	{
		/* Used to check the timer is running at the expected frequency. */
		ulHighFrequencyTimerCounts++;

		/* Latch the highest interrupt nesting count detected. */
		if( ulPortInterruptNesting > ulMaxRecordedNesting )
		{
			ulMaxRecordedNesting = ulPortInterruptNesting;
		}

		xYieldRequired = pdFALSE;
	}

	/* If xYieldRequired is not pdFALSE then calling either xFirstTimerHandler()
	or xSecondTimerHandler() resulted in a task leaving the blocked state and
	the task that left the blocked state had a priority higher than the currently
	running task (the task this interrupt interrupted) - so a context switch
	should be performed so the interrupt returns directly to the higher priority
	task.  xYieldRequired is tested inside the following macro. */
	portYIELD_FROM_ISR( xYieldRequired );
}