diff --git a/portable/GCC/ATmegaxxxx/port.c b/portable/GCC/ATmegaxxxx/port.c
new file mode 100644
index 0000000..270319c
--- /dev/null
+++ b/portable/GCC/ATmegaxxxx/port.c
@@ -0,0 +1,774 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#include <stdlib.h>
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/wdt.h>
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the AVR port.
+ *----------------------------------------------------------*/
+
+/* Start tasks with interrupts enabled. */
+#define portFLAGS_INT_ENABLED           ( (StackType_t) 0x80 )
+
+#if defined( portUSE_WDTO)
+    #warning "Watchdog Timer used for scheduler."
+    #define portSCHEDULER_ISR           WDT_vect
+
+#elif defined( portUSE_TIMER0 )
+/* Hardware constants for Timer0. */
+    #warning "Timer0 used for scheduler."
+    #define portSCHEDULER_ISR           TIMER0_COMPA_vect
+    #define portCLEAR_COUNTER_ON_MATCH  ( (uint8_t) _BV(WGM01) )
+    #define portPRESCALE_1024           ( (uint8_t) (_BV(CS02)|_BV(CS00)) )
+    #define portCLOCK_PRESCALER         ( (uint32_t) 1024 )
+    #define portCOMPARE_MATCH_A_INTERRUPT_ENABLE    ( (uint8_t) _BV(OCIE0A) )
+    #define portOCRL                    OCR0A
+    #define portTCCRa                   TCCR0A
+    #define portTCCRb                   TCCR0B
+    #define portTIMSK                   TIMSK0
+    #define portTIFR                    TIFR0
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+/* We require the address of the pxCurrentTCB variable, but don't want to know
+any details of its type. */
+typedef void TCB_t;
+extern volatile TCB_t * volatile pxCurrentTCB;
+
+/*-----------------------------------------------------------*/
+
+/**
+    Enable the watchdog timer, configuring it for expire after
+    (value) timeout (which is a combination of the WDP0
+    through WDP3 bits).
+
+    This function is derived from <avr/wdt.h> but enables only
+    the interrupt bit (WDIE), rather than the reset bit (WDE).
+
+    Can't find it documented but the WDT, once enabled,
+    rolls over and fires a new interrupt each time.
+
+    See also the symbolic constants WDTO_15MS et al.
+
+    Updated to match avr-libc 2.0.0
+*/
+
+#if defined( portUSE_WDTO)
+
+static __inline__
+__attribute__ ((__always_inline__))
+void wdt_interrupt_enable (const uint8_t value)
+{
+    if (_SFR_IO_REG_P (_WD_CONTROL_REG))
+    {
+        __asm__ __volatile__ (
+                "in __tmp_reg__,__SREG__"   "\n\t"
+                "cli"                       "\n\t"
+                "wdr"                       "\n\t"
+                "out %0, %1"                "\n\t"
+                "out __SREG__,__tmp_reg__"  "\n\t"
+                "out %0, %2"                "\n\t"
+                : /* no outputs */
+                : "I" (_SFR_IO_ADDR(_WD_CONTROL_REG)),
+                "r" ((uint8_t)(_BV(_WD_CHANGE_BIT) | _BV(WDE))),
+                "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) |
+                        _BV(WDIF) | _BV(WDIE) | (value & 0x07)) )
+                : "r0"
+        );
+    }
+    else
+    {
+        __asm__ __volatile__ (
+                "in __tmp_reg__,__SREG__"   "\n\t"
+                "cli"                       "\n\t"
+                "wdr"                       "\n\t"
+                "sts %0, %1"                "\n\t"
+                "out __SREG__,__tmp_reg__"  "\n\t"
+                "sts %0, %2"                "\n\t"
+                : /* no outputs */
+                : "n" (_SFR_MEM_ADDR(_WD_CONTROL_REG)),
+                "r" ((uint8_t)(_BV(_WD_CHANGE_BIT) | _BV(WDE))),
+                "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) |
+                        _BV(WDIF) | _BV(WDIE) | (value & 0x07)) )
+                : "r0"
+        );
+    }
+}
+#endif
+
+/*-----------------------------------------------------------*/
+/**
+    Enable the watchdog timer, configuring it for expire after
+    (value) timeout (which is a combination of the WDP0
+    through WDP3 bits).
+
+    This function is derived from <avr/wdt.h> but enables both
+    the reset bit (WDE), and the interrupt bit (WDIE).
+
+    This will ensure that if the interrupt is not serviced
+    before the second timeout, the AVR will reset.
+
+    Servicing the interrupt automatically clears it,
+    and ensures the AVR does not reset.
+
+    Can't find it documented but the WDT, once enabled,
+    rolls over and fires a new interrupt each time.
+
+    See also the symbolic constants WDTO_15MS et al.
+
+    Updated to match avr-libc 2.0.0
+*/
+
+#if defined( portUSE_WDTO)
+
+static __inline__
+__attribute__ ((__always_inline__))
+void wdt_interrupt_reset_enable (const uint8_t value)
+{
+    if (_SFR_IO_REG_P (_WD_CONTROL_REG))
+    {
+        __asm__ __volatile__ (
+                "in __tmp_reg__,__SREG__"   "\n\t"
+                "cli"                       "\n\t"
+                "wdr"                       "\n\t"
+                "out %0, %1"                "\n\t"
+                "out __SREG__,__tmp_reg__"  "\n\t"
+                "out %0, %2"                "\n\t"
+                : /* no outputs */
+                : "I" (_SFR_IO_ADDR(_WD_CONTROL_REG)),
+                "r" ((uint8_t)(_BV(_WD_CHANGE_BIT) | _BV(WDE))),
+                "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) |
+                        _BV(WDIF) | _BV(WDIE) | _BV(WDE) | (value & 0x07)) )
+                : "r0"
+        );
+    }
+    else
+    {
+        __asm__ __volatile__ (
+                "in __tmp_reg__,__SREG__"   "\n\t"
+                "cli"                       "\n\t"
+                "wdr"                       "\n\t"
+                "sts %0, %1"                "\n\t"
+                "out __SREG__,__tmp_reg__"  "\n\t"
+                "sts %0, %2"                "\n\t"
+                : /* no outputs */
+                : "n" (_SFR_MEM_ADDR(_WD_CONTROL_REG)),
+                "r" ((uint8_t)(_BV(_WD_CHANGE_BIT) | _BV(WDE))),
+                "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) |
+                        _BV(WDIF) | _BV(WDIE) | _BV(WDE) | (value & 0x07)) )
+                : "r0"
+        );
+    }
+}
+#endif
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro to save all the general purpose registers, the save the stack pointer
+ * into the TCB.
+ *
+ * The first thing we do is save the flags then disable interrupts. This is to
+ * guard our stack against having a context switch interrupt after we have already
+ * pushed the registers onto the stack - causing the 32 registers to be on the
+ * stack twice.
+ *
+ * r1 is set to zero (__zero_reg__) as the compiler expects it to be thus, however
+ * some of the math routines make use of R1.
+ *
+ * r0 is set to __tmp_reg__ as the compiler expects it to be thus.
+ *
+ * #if defined(__AVR_HAVE_RAMPZ__)
+ * #define __RAMPZ__ 0x3B
+ * #endif
+ *
+ * #if defined(__AVR_3_BYTE_PC__)
+ * #define __EIND__ 0x3C
+ * #endif
+ *
+ * The interrupts will have been disabled during the call to portSAVE_CONTEXT()
+ * so we need not worry about reading/writing to the stack pointer.
+ */
+#if defined(__AVR_3_BYTE_PC__) && defined(__AVR_HAVE_RAMPZ__)
+/* 3-Byte PC Save  with RAMPZ */
+#define portSAVE_CONTEXT()                                                              \
+        __asm__ __volatile__ (  "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, __SREG__                   \n\t"   \
+                                "cli                                            \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, 0x3B                       \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, 0x3C                       \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "push   __zero_reg__                            \n\t"   \
+                                "clr    __zero_reg__                            \n\t"   \
+                                "push   r2                                      \n\t"   \
+                                "push   r3                                      \n\t"   \
+                                "push   r4                                      \n\t"   \
+                                "push   r5                                      \n\t"   \
+                                "push   r6                                      \n\t"   \
+                                "push   r7                                      \n\t"   \
+                                "push   r8                                      \n\t"   \
+                                "push   r9                                      \n\t"   \
+                                "push   r10                                     \n\t"   \
+                                "push   r11                                     \n\t"   \
+                                "push   r12                                     \n\t"   \
+                                "push   r13                                     \n\t"   \
+                                "push   r14                                     \n\t"   \
+                                "push   r15                                     \n\t"   \
+                                "push   r16                                     \n\t"   \
+                                "push   r17                                     \n\t"   \
+                                "push   r18                                     \n\t"   \
+                                "push   r19                                     \n\t"   \
+                                "push   r20                                     \n\t"   \
+                                "push   r21                                     \n\t"   \
+                                "push   r22                                     \n\t"   \
+                                "push   r23                                     \n\t"   \
+                                "push   r24                                     \n\t"   \
+                                "push   r25                                     \n\t"   \
+                                "push   r26                                     \n\t"   \
+                                "push   r27                                     \n\t"   \
+                                "push   r28                                     \n\t"   \
+                                "push   r29                                     \n\t"   \
+                                "push   r30                                     \n\t"   \
+                                "push   r31                                     \n\t"   \
+                                "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "in     __tmp_reg__, __SP_L__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                                "in     __tmp_reg__, __SP_H__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                             );
+#elif defined(__AVR_HAVE_RAMPZ__)
+/* 2-Byte PC Save  with RAMPZ */
+#define portSAVE_CONTEXT()                                                              \
+        __asm__ __volatile__ (  "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, __SREG__                   \n\t"   \
+                                "cli                                            \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, 0x3B                       \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "push   __zero_reg__                            \n\t"   \
+                                "clr    __zero_reg__                            \n\t"   \
+                                "push   r2                                      \n\t"   \
+                                "push   r3                                      \n\t"   \
+                                "push   r4                                      \n\t"   \
+                                "push   r5                                      \n\t"   \
+                                "push   r6                                      \n\t"   \
+                                "push   r7                                      \n\t"   \
+                                "push   r8                                      \n\t"   \
+                                "push   r9                                      \n\t"   \
+                                "push   r10                                     \n\t"   \
+                                "push   r11                                     \n\t"   \
+                                "push   r12                                     \n\t"   \
+                                "push   r13                                     \n\t"   \
+                                "push   r14                                     \n\t"   \
+                                "push   r15                                     \n\t"   \
+                                "push   r16                                     \n\t"   \
+                                "push   r17                                     \n\t"   \
+                                "push   r18                                     \n\t"   \
+                                "push   r19                                     \n\t"   \
+                                "push   r20                                     \n\t"   \
+                                "push   r21                                     \n\t"   \
+                                "push   r22                                     \n\t"   \
+                                "push   r23                                     \n\t"   \
+                                "push   r24                                     \n\t"   \
+                                "push   r25                                     \n\t"   \
+                                "push   r26                                     \n\t"   \
+                                "push   r27                                     \n\t"   \
+                                "push   r28                                     \n\t"   \
+                                "push   r29                                     \n\t"   \
+                                "push   r30                                     \n\t"   \
+                                "push   r31                                     \n\t"   \
+                                "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "in     __tmp_reg__, __SP_L__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                                "in     __tmp_reg__, __SP_H__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                             );
+#else
+/* 2-Byte PC Save */
+#define portSAVE_CONTEXT()                                                              \
+        __asm__ __volatile__ (  "push   __tmp_reg__                             \n\t"   \
+                                "in     __tmp_reg__, __SREG__                   \n\t"   \
+                                "cli                                            \n\t"   \
+                                "push   __tmp_reg__                             \n\t"   \
+                                "push   __zero_reg__                            \n\t"   \
+                                "clr    __zero_reg__                            \n\t"   \
+                                "push   r2                                      \n\t"   \
+                                "push   r3                                      \n\t"   \
+                                "push   r4                                      \n\t"   \
+                                "push   r5                                      \n\t"   \
+                                "push   r6                                      \n\t"   \
+                                "push   r7                                      \n\t"   \
+                                "push   r8                                      \n\t"   \
+                                "push   r9                                      \n\t"   \
+                                "push   r10                                     \n\t"   \
+                                "push   r11                                     \n\t"   \
+                                "push   r12                                     \n\t"   \
+                                "push   r13                                     \n\t"   \
+                                "push   r14                                     \n\t"   \
+                                "push   r15                                     \n\t"   \
+                                "push   r16                                     \n\t"   \
+                                "push   r17                                     \n\t"   \
+                                "push   r18                                     \n\t"   \
+                                "push   r19                                     \n\t"   \
+                                "push   r20                                     \n\t"   \
+                                "push   r21                                     \n\t"   \
+                                "push   r22                                     \n\t"   \
+                                "push   r23                                     \n\t"   \
+                                "push   r24                                     \n\t"   \
+                                "push   r25                                     \n\t"   \
+                                "push   r26                                     \n\t"   \
+                                "push   r27                                     \n\t"   \
+                                "push   r28                                     \n\t"   \
+                                "push   r29                                     \n\t"   \
+                                "push   r30                                     \n\t"   \
+                                "push   r31                                     \n\t"   \
+                                "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "in     __tmp_reg__, __SP_L__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                                "in     __tmp_reg__, __SP_H__                   \n\t"   \
+                                "st     x+, __tmp_reg__                         \n\t"   \
+                             );
+#endif
+
+/*
+ * Opposite to portSAVE_CONTEXT().  Interrupts will have been disabled during
+ * the context save so we can write to the stack pointer.
+ */
+#if defined(__AVR_3_BYTE_PC__) && defined(__AVR_HAVE_RAMPZ__)
+/* 3-Byte PC Restore with RAMPZ */
+#define portRESTORE_CONTEXT()                                                           \
+        __asm__ __volatile__ (  "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "ld     r28, x+                                 \n\t"   \
+                                "out    __SP_L__, r28                           \n\t"   \
+                                "ld     r29, x+                                 \n\t"   \
+                                "out    __SP_H__, r29                           \n\t"   \
+                                "pop    r31                                     \n\t"   \
+                                "pop    r30                                     \n\t"   \
+                                "pop    r29                                     \n\t"   \
+                                "pop    r28                                     \n\t"   \
+                                "pop    r27                                     \n\t"   \
+                                "pop    r26                                     \n\t"   \
+                                "pop    r25                                     \n\t"   \
+                                "pop    r24                                     \n\t"   \
+                                "pop    r23                                     \n\t"   \
+                                "pop    r22                                     \n\t"   \
+                                "pop    r21                                     \n\t"   \
+                                "pop    r20                                     \n\t"   \
+                                "pop    r19                                     \n\t"   \
+                                "pop    r18                                     \n\t"   \
+                                "pop    r17                                     \n\t"   \
+                                "pop    r16                                     \n\t"   \
+                                "pop    r15                                     \n\t"   \
+                                "pop    r14                                     \n\t"   \
+                                "pop    r13                                     \n\t"   \
+                                "pop    r12                                     \n\t"   \
+                                "pop    r11                                     \n\t"   \
+                                "pop    r10                                     \n\t"   \
+                                "pop    r9                                      \n\t"   \
+                                "pop    r8                                      \n\t"   \
+                                "pop    r7                                      \n\t"   \
+                                "pop    r6                                      \n\t"   \
+                                "pop    r5                                      \n\t"   \
+                                "pop    r4                                      \n\t"   \
+                                "pop    r3                                      \n\t"   \
+                                "pop    r2                                      \n\t"   \
+                                "pop    __zero_reg__                            \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    0x3C, __tmp_reg__                       \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    0x3B, __tmp_reg__                       \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    __SREG__, __tmp_reg__                   \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                             );
+#elif defined(__AVR_HAVE_RAMPZ__)
+/* 2-Byte PC Restore with RAMPZ */
+#define portRESTORE_CONTEXT()                                                           \
+        __asm__ __volatile__ (  "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "ld     r28, x+                                 \n\t"   \
+                                "out    __SP_L__, r28                           \n\t"   \
+                                "ld     r29, x+                                 \n\t"   \
+                                "out    __SP_H__, r29                           \n\t"   \
+                                "pop    r31                                     \n\t"   \
+                                "pop    r30                                     \n\t"   \
+                                "pop    r29                                     \n\t"   \
+                                "pop    r28                                     \n\t"   \
+                                "pop    r27                                     \n\t"   \
+                                "pop    r26                                     \n\t"   \
+                                "pop    r25                                     \n\t"   \
+                                "pop    r24                                     \n\t"   \
+                                "pop    r23                                     \n\t"   \
+                                "pop    r22                                     \n\t"   \
+                                "pop    r21                                     \n\t"   \
+                                "pop    r20                                     \n\t"   \
+                                "pop    r19                                     \n\t"   \
+                                "pop    r18                                     \n\t"   \
+                                "pop    r17                                     \n\t"   \
+                                "pop    r16                                     \n\t"   \
+                                "pop    r15                                     \n\t"   \
+                                "pop    r14                                     \n\t"   \
+                                "pop    r13                                     \n\t"   \
+                                "pop    r12                                     \n\t"   \
+                                "pop    r11                                     \n\t"   \
+                                "pop    r10                                     \n\t"   \
+                                "pop    r9                                      \n\t"   \
+                                "pop    r8                                      \n\t"   \
+                                "pop    r7                                      \n\t"   \
+                                "pop    r6                                      \n\t"   \
+                                "pop    r5                                      \n\t"   \
+                                "pop    r4                                      \n\t"   \
+                                "pop    r3                                      \n\t"   \
+                                "pop    r2                                      \n\t"   \
+                                "pop    __zero_reg__                            \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    0x3B, __tmp_reg__                       \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    __SREG__, __tmp_reg__                   \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                             );
+#else
+/* 2-Byte PC Restore */
+#define portRESTORE_CONTEXT()                                                           \
+        __asm__ __volatile__ (  "lds    r26, pxCurrentTCB                       \n\t"   \
+                                "lds    r27, pxCurrentTCB + 1                   \n\t"   \
+                                "ld     r28, x+                                 \n\t"   \
+                                "out    __SP_L__, r28                           \n\t"   \
+                                "ld     r29, x+                                 \n\t"   \
+                                "out    __SP_H__, r29                           \n\t"   \
+                                "pop    r31                                     \n\t"   \
+                                "pop    r30                                     \n\t"   \
+                                "pop    r29                                     \n\t"   \
+                                "pop    r28                                     \n\t"   \
+                                "pop    r27                                     \n\t"   \
+                                "pop    r26                                     \n\t"   \
+                                "pop    r25                                     \n\t"   \
+                                "pop    r24                                     \n\t"   \
+                                "pop    r23                                     \n\t"   \
+                                "pop    r22                                     \n\t"   \
+                                "pop    r21                                     \n\t"   \
+                                "pop    r20                                     \n\t"   \
+                                "pop    r19                                     \n\t"   \
+                                "pop    r18                                     \n\t"   \
+                                "pop    r17                                     \n\t"   \
+                                "pop    r16                                     \n\t"   \
+                                "pop    r15                                     \n\t"   \
+                                "pop    r14                                     \n\t"   \
+                                "pop    r13                                     \n\t"   \
+                                "pop    r12                                     \n\t"   \
+                                "pop    r11                                     \n\t"   \
+                                "pop    r10                                     \n\t"   \
+                                "pop    r9                                      \n\t"   \
+                                "pop    r8                                      \n\t"   \
+                                "pop    r7                                      \n\t"   \
+                                "pop    r6                                      \n\t"   \
+                                "pop    r5                                      \n\t"   \
+                                "pop    r4                                      \n\t"   \
+                                "pop    r3                                      \n\t"   \
+                                "pop    r2                                      \n\t"   \
+                                "pop    __zero_reg__                            \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                                "out    __SREG__, __tmp_reg__                   \n\t"   \
+                                "pop    __tmp_reg__                             \n\t"   \
+                             );
+#endif
+/*-----------------------------------------------------------*/
+
+/*
+ * Perform hardware setup to enable ticks from relevant Timer.
+ */
+static void prvSetupTimerInterrupt( void );
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+uint16_t usAddress;
+    /* Simulate how the stack would look after a call to vPortYield() generated by
+    the compiler. */
+
+    /* The start of the task code will be popped off the stack last, so place
+    it on first. */
+    usAddress = ( uint16_t ) pxCode;
+    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
+    pxTopOfStack--;
+
+    usAddress >>= 8;
+    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
+    pxTopOfStack--;
+
+#if defined(__AVR_3_BYTE_PC__)
+    /* The AVR ATmega2560/ATmega2561 have 256KBytes of program memory and a 17-bit
+     * program counter. When a code address is stored on the stack, it takes 3 bytes
+     * instead of 2 for the other ATmega* chips.
+     *
+     * Store 0 as the top byte since we force all task routines to the bottom 128K
+     * of flash. We do this by using the .lowtext label in the linker script.
+     *
+     * In order to do this properly, we would need to get a full 3-byte pointer to
+     * pxCode. That requires a change to GCC. Not likely to happen any time soon.
+     */
+    *pxTopOfStack = 0;
+    pxTopOfStack--;
+#endif
+
+    /* Next simulate the stack as if after a call to portSAVE_CONTEXT().
+    portSAVE_CONTEXT places the flags on the stack immediately after r0
+    to ensure the interrupts get disabled as soon as possible, and so ensuring
+    the stack use is minimal should a context switch interrupt occur. */
+    *pxTopOfStack = ( StackType_t ) 0x00;    /* R0 */
+    pxTopOfStack--;
+    *pxTopOfStack = portFLAGS_INT_ENABLED;
+    pxTopOfStack--;
+
+#if defined(__AVR_3_BYTE_PC__)
+    /* If we have an ATmega256x, we are also saving the EIND register.
+     * We should default to 0.
+     */
+    *pxTopOfStack = ( StackType_t ) 0x00;    /* EIND */
+    pxTopOfStack--;
+#endif
+
+#if defined(__AVR_HAVE_RAMPZ__)
+    /* We are saving the RAMPZ register.
+     * We should default to 0.
+     */
+    *pxTopOfStack = ( StackType_t ) 0x00;    /* RAMPZ */
+    pxTopOfStack--;
+#endif
+
+    /* Now the remaining registers. The compiler expects R1 to be 0. */
+    *pxTopOfStack = ( StackType_t ) 0x00;    /* R1 */
+
+    /* Leave R2 - R23 untouched */
+    pxTopOfStack -= 23;
+
+    /* Place the parameter on the stack in the expected location. */
+    usAddress = ( uint16_t ) pvParameters;
+    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
+    pxTopOfStack--;
+
+    usAddress >>= 8;
+    *pxTopOfStack = ( StackType_t ) ( usAddress & ( uint16_t ) 0x00ff );
+
+    /* Leave register R26 - R31 untouched */
+    pxTopOfStack -= 7;
+
+    return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void )
+{
+    /* Setup the relevant timer hardware to generate the tick. */
+    prvSetupTimerInterrupt();
+
+    /* Restore the context of the first task that is going to run. */
+    portRESTORE_CONTEXT();
+
+    /* Simulate a function call end as generated by the compiler. We will now
+    jump to the start of the task the context of which we have just restored. */
+    __asm__ __volatile__ ( "ret" );
+
+    /* Should not get here. */
+    return pdTRUE;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+    /* It is unlikely that the AVR port will get stopped.  If required simply
+    disable the tick interrupt here. */
+
+#if defined (portUSE_WDTO)
+        wdt_disable();                                          /* disable Watchdog Timer */
+
+#elif defined( portUSE_TIMER0 )
+        portTIMSK &= ~( _BV(OCIE0B)|_BV(OCIE0A)|_BV(TOIE0) );   /* disable all Timer0 interrupts */
+
+#endif
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Manual context switch. The first thing we do is save the registers so we
+ * can use a naked attribute.
+ */
+void vPortYield( void ) __attribute__ ( ( hot, flatten, naked ) );
+void vPortYield( void )
+{
+    portSAVE_CONTEXT();
+    vTaskSwitchContext();
+    portRESTORE_CONTEXT();
+
+    __asm__ __volatile__ ( "ret" );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Manual context switch callable from ISRs. The first thing we do is save
+ * the registers so we can use a naked attribute.
+ */
+void vPortYieldFromISR(void) __attribute__ ( ( hot, flatten, naked ) );
+void vPortYieldFromISR(void)
+{
+    portSAVE_CONTEXT();
+    vTaskSwitchContext();
+    portRESTORE_CONTEXT();
+
+    __asm__ __volatile__ ( "reti" );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Context switch function used by the tick. This must be identical to
+ * vPortYield() from the call to vTaskSwitchContext() onwards. The only
+ * difference from vPortYield() is the tick count is incremented as the
+ * call comes from the tick ISR.
+ */
+void vPortYieldFromTick( void ) __attribute__ ( ( hot, flatten, naked ) );
+void vPortYieldFromTick( void )
+{
+    portSAVE_CONTEXT();
+    if( xTaskIncrementTick() != pdFALSE )
+    {
+        vTaskSwitchContext();
+    }
+    portRESTORE_CONTEXT();
+
+    __asm__ __volatile__ ( "ret" );
+}
+/*-----------------------------------------------------------*/
+
+#if defined(portUSE_WDTO)
+/*
+ * Setup WDT to generate a tick interrupt.
+ */
+void prvSetupTimerInterrupt( void )
+{
+    /* reset watchdog */
+    wdt_reset();
+
+    /* set up WDT Interrupt (rather than the WDT Reset). */
+    wdt_interrupt_enable( portUSE_WDTO );
+}
+
+#elif defined (portUSE_TIMER0)
+/*
+ * Setup Timer0 compare match A to generate a tick interrupt.
+ */
+static void prvSetupTimerInterrupt( void )
+{
+uint32_t ulCompareMatch;
+uint8_t ucLowByte;
+
+    /* Using 8bit Timer0 to generate the tick. Correct fuses must be
+    selected for the configCPU_CLOCK_HZ clock.*/
+
+    ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
+
+    /* We only have 8 bits so have to scale 1024 to get our required tick rate. */
+    ulCompareMatch /= portCLOCK_PRESCALER;
+
+    /* Adjust for correct value. */
+    ulCompareMatch -= ( uint32_t ) 1;
+
+    /* Setup compare match value for compare match A. Interrupts are disabled
+    before this is called so we need not worry here. */
+    ucLowByte = ( uint8_t ) ( ulCompareMatch & ( uint32_t ) 0xff );
+    portOCRL = ucLowByte;
+
+    /* Setup clock source and compare match behaviour. */
+    portTCCRa = portCLEAR_COUNTER_ON_MATCH;
+    portTCCRb = portPRESCALE_1024;
+
+
+    /* Enable the interrupt - this is okay as interrupt are currently globally disabled. */
+    ucLowByte = portTIMSK;
+    ucLowByte |= portCOMPARE_MATCH_A_INTERRUPT_ENABLE;
+    portTIMSK = ucLowByte;
+}
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+#if configUSE_PREEMPTION == 1
+
+    /*
+     * Tick ISR for preemptive scheduler. We can use a naked attribute as
+     * the context is saved at the start of vPortYieldFromTick(). The tick
+     * count is incremented after the context is saved.
+     *
+     * use ISR_NOBLOCK where there is an important timer running, that should preempt the scheduler.
+     *
+     */
+    ISR(portSCHEDULER_ISR, ISR_NAKED) __attribute__ ((hot, flatten));
+/*  ISR(portSCHEDULER_ISR, ISR_NAKED ISR_NOBLOCK) __attribute__ ((hot, flatten));
+ */
+    ISR(portSCHEDULER_ISR)
+    {
+        vPortYieldFromTick();
+        __asm__ __volatile__ ( "reti" );
+    }
+#else
+
+    /*
+     * Tick ISR for the cooperative scheduler. All this does is increment the
+     * tick count. We don't need to switch context, this can only be done by
+     * manual calls to taskYIELD();
+     *
+     * use ISR_NOBLOCK where there is an important timer running, that should preempt the scheduler.
+     */
+    ISR(portSCHEDULER_ISR) __attribute__ ((hot, flatten));
+/*  ISR(portSCHEDULER_ISR, ISR_NOBLOCK) __attribute__ ((hot, flatten));
+ */
+    ISR(portSCHEDULER_ISR)
+    {
+        xTaskIncrementTick();
+    }
+#endif
+
+
diff --git a/portable/GCC/ATmegaxxxx/portmacro.h b/portable/GCC/ATmegaxxxx/portmacro.h
new file mode 100644
index 0000000..b6b5128
--- /dev/null
+++ b/portable/GCC/ATmegaxxxx/portmacro.h
@@ -0,0 +1,156 @@
+/*
+ * FreeRTOS Kernel V10.3.1
+ * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+*/
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+#include <avr/wdt.h>
+
+/* Type definitions. */
+#define portCHAR                    char
+#define portFLOAT                   float
+#define portDOUBLE                  double
+#define portLONG                    long
+#define portSHORT                   int
+
+typedef uint8_t                     StackType_t;
+typedef int8_t                      BaseType_t;
+typedef uint8_t                     UBaseType_t;
+
+#if configUSE_16_BIT_TICKS == 1
+    typedef uint16_t                TickType_t;
+    #define portMAX_DELAY           ( TickType_t ) 0xffff
+#else
+    typedef uint32_t                TickType_t;
+    #define portMAX_DELAY           ( TickType_t ) 0xffffffffUL
+#endif
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+
+#define portENTER_CRITICAL()        __asm__ __volatile__ (                          \
+                                        "in __tmp_reg__, __SREG__"        "\n\t"    \
+                                        "cli"                             "\n\t"    \
+                                        "push __tmp_reg__"                "\n\t"    \
+                                        ::: "memory"                                \
+                                        )
+
+
+#define portEXIT_CRITICAL()         __asm__ __volatile__ (                          \
+                                        "pop __tmp_reg__"                 "\n\t"    \
+                                        "out __SREG__, __tmp_reg__"       "\n\t"    \
+                                        ::: "memory"                                \
+                                        )
+
+
+#define portDISABLE_INTERRUPTS()    __asm__ __volatile__ ( "cli" ::: "memory")
+#define portENABLE_INTERRUPTS()     __asm__ __volatile__ ( "sei" ::: "memory")
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+
+/* System Tick  - Scheduler timer
+ * Prefer to use the enhanced Watchdog Timer, but also Timer0 is ok.
+ */
+
+#if defined(WDIE) && defined(WDIF)              /* If Enhanced WDT with interrupt capability is available */
+
+#define portUSE_WDTO                WDTO_15MS   /* use the Watchdog Timer for xTaskIncrementTick */
+
+/* Watchdog period options:         WDTO_15MS
+                                    WDTO_30MS
+                                    WDTO_60MS
+                                    WDTO_120MS
+                                    WDTO_250MS
+                                    WDTO_500MS
+                                    WDTO_1S
+                                    WDTO_2S
+*/
+
+#else
+
+#define portUSE_TIMER0                          /* use the 8-bit Timer0 for xTaskIncrementTick */
+
+#endif
+
+#define portSTACK_GROWTH            ( -1 )
+
+/* Timing for the scheduler.
+ * Watchdog Timer is 128kHz nominal,
+ * but 120 kHz at 5V DC and 25 degrees is actually more accurate,
+ * from data sheet.
+ */
+#if defined( portUSE_WDTO )
+#define portTICK_PERIOD_MS          ( (TickType_t) _BV( portUSE_WDTO + 4 ) )
+#else
+#define portTICK_PERIOD_MS          ( (TickType_t) 1000 / configTICK_RATE_HZ )
+#endif
+
+#define portBYTE_ALIGNMENT          1
+#define portNOP()                   __asm__ __volatile__ ( "nop" );
+/*-----------------------------------------------------------*/
+
+/* Kernel utilities. */
+extern void vPortYield( void )      __attribute__ ( ( naked ) );
+#define portYIELD()                 vPortYield()
+
+extern void vPortYieldFromISR( void )   __attribute__ ( ( naked ) );
+#define portYIELD_FROM_ISR()            vPortYieldFromISR()
+/*-----------------------------------------------------------*/
+
+#if defined(__AVR_3_BYTE_PC__)
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+
+/* Add .lowtext tag from the avr linker script avr6.x for ATmega2560 and ATmega2561
+ * to make sure functions are loaded in low memory.
+ */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) __attribute__ ((section (".lowtext")))
+#else
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#endif
+
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
diff --git a/portable/GCC/ATmegaxxxx/readme.md b/portable/GCC/ATmegaxxxx/readme.md
new file mode 100644
index 0000000..4afb4fe
--- /dev/null
+++ b/portable/GCC/ATmegaxxxx/readme.md
@@ -0,0 +1,86 @@
+<h2>ATmegaxxxx</h2>
+
+__Port for generalised Microchip ATmega architecture__
+
+<h3>Description</h3>
+
+This port provides a basis for supporting all modern ATmega devices using either the Enhanced Watchdog Timer, or Timer0 (an 8-bit Timer generally available across the whole range).
+
+This initial commit contains the information required to build with System Tick being generated by either the:
+- Watchdog Timer, or
+- Timer0 - an 8-bit Timer, or
+- TimerN - a 16-bit Timer which will be configured by the user.
+
+Further commits can add support for 16-bit Timers available on many relevant devices. The availability of these 16-bit Timers is somewhat device specific, and these complex and highly configurable Timers are often used to generate phase correct PWM timing (for example) and they would be wasted as a simple System Tick.
+
+The port also provides support for the 3 byte program counter devices __ATmega2560__ and __ATmega2561__. Specific to these two devices the `EIND` register need to be preserved during a context switch. Also, due to a limitation in GCC, the scheduler needs to reside in the lower 128kB of flash for both of these devices. This is achieved by adding the `.lowtext` section attribute to the function prototype.
+
+To build generic Microchip (AVR) ATmega support the similarities across the family must be considered, and differences respected. Some comments on the strategy follow.
+
+<h3>System Tick</h3>
+
+The Microchip (AVR) ATmega family has limited Timer and Pin capabilities, and is designed to be used in physical applications, controlling hardware with PWM and recognising level and edge voltage changes. It does this mainly through the use of 16-bit Timers (for generating phase correct PWM by up/down counting), and Pins attached to Interrupts. The 8-bit Timers are also attached to Pins, and they can be used for more simple timing tasks, requiring only a single counting direction.
+
+The Timers not attached to Pins (and therefore not impacting the application of the device) are some 16-bit Timers (very device dependent, eg Timer3 on 1284p), The RTC Timer, and the Watch Dog Timer.
+
+The Watch Dog Timer is configured identically across most of the ATmega devices. It comes in two variants. 1. Old style (eg ATmega32) which does not have an Interrupt capability, and hence on these old devices cannot be used as the System Tick. and 2. New style enhanced WDT, which can generate an Interrupt, and is available on every relevant device.
+
+Using the Watch Dog Timer (WDT) to generate the System Tick does not impact its use as a watch dog. It can be configured to generate a System Tick interrupt, and then one period later to Reset the device if the interrupt is not serviced.
+
+Configuration and usage of the WDT is covered in `<avr/wdt.h>` which was revised in avr-libc 2.0.0.
+
+Two additional WDT functions are provided in `port.c`, which extend avr-libc functions to enable the WDT Interrupt without enabling Reset `wdt_interrupt_enable()`, and to enable both the Interrupt and the Reset `wdt_interrupt_reset_enable()`.
+
+<h3>3 Byte PC Devices</h3>
+
+The ATtiny, ATmega, ATxmega families can optionally support both 3 byte PC and 3 byte RAM addresses. However, focusing on just the ATmega family only two devices have a large Flash requiring them to use 3 byte PC. These are the __ATmega2560__ and __ATmega2561__. This PR provides support for these two devices in two ways.
+
+ - providing `portSAVE_CONTEXT()` and `portRESTORE_CONTEXT` saving both the __RAMPZ__ and __EIND__ registers.
+ - providing a `portTASK_FUNCTION_PROTO()` with the linker attribute `.lowtext` which is used to ensure that the scheduler and relevant functions remain in the lower 128kB of Flash.
+
+For devices which can support __XRAM__ and have the __RAMPZ__ register, this register is also preserved during the context switch.
+
+<h3>Interrupt Nesting</h3>
+
+The ATmega family does not support interrupt nesting, having only one interrupt priority. This means that when the Scheduler is running, interrupts are normally disabled.
+
+When a very time critical process is running, based on microsecond timing generated by one of the Timers, it is important to re-enable interrupts as early as possible in processing a Yield. Fortunately, this is supported through the use of the `NO_BLOCK` decorator when defining the Interrupt Service Routine.
+
+The `NO_BLOCK` decorator will enable the global interrupt early in the handling of an ISR (in this case for the Scheduler), and enable interrupts to be nested. Using this method, I've been able to successfully implement an [Audio Synthesiser](https://feilipu.me/2015/06/02/goldilocks-analogue-synthesizer/) with less than 83 microseconds for each cycle, whilst still running the Scheduler to handle display and input.
+
+Using `NO_BLOCK` is optional, and should only be done if a critical Timer should interrupt the Scheduler.
+
+<h3>Heap Management</h3>
+
+Most users of FreeRTOS will choose to manage their own heap using one of the pre-allocated heap management algorithms, but for those that choose to use `heap_3.c`, the wrappered `malloc()` method, there is an issue that needs to be addressed.
+
+The avr-libc library assumes that the stack will always be above the heap, and does a check for this when responding to a `malloc()` request. This is not the case when Tasks are running, as their stack is located in the early allocated heap address ranges which will be below free heap memory, and so the `malloc()` request will fail even though heap space is available.
+
+To avoid this issue causing `pvPort_Malloc()` to failing, the user needs to issue this tuning statement BEFORE they use the heap, or use the `xTaskCreate()` API.
+
+```c
+if( __malloc_heap_end == 0 )
+    __malloc_heap_end = (char *)(RAMEND - __malloc_margin);
+```
+Unfortunately in the repository there is nowhere sensible to include this statement as it should be included early in the `main()` function.
+
+For devices which can support __XRAM__ the user will need to tune the location of stack and heap according to their own requirements.
+
+<h3>Supported Devices</h3>
+
+ATmega devices with __ENHANCED WDT__ Interrupt capability - will use WDT.
+
+ - ATmega8U2/16U2/32U2 -> 2kB RAM
+ - ATmega16U4/32U4 - Arduino Leonardo -> 2.5kB RAM
+ - ATmega48PB/88PB/168PB/328PB - Arduino Uno -> 2kB RAM
+ - ATmega164PA/324PA/644PA/1284P - Goldilocks -> __16kB RAM__
+ - ATmega324PB -> 2kB RAM
+ - ATmega640/1280/2560/1281/2561 - Arduino Mega -> __8kB RAM + XRAM__
+
+ATmega devices without enhanced __WDT__ Interrupt capability - will use a 8-bit or 16-bit Timer.
+
+ - ATmega8A/16A/32A/64A/128A -> 4kB RAM
+ - ATmega165A/165PA/325A/325PA/3250A/3250PA/645A/645P/6450A/6450P -> 4kB RAM
+ - ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P -> 4kB RAM
+ - ATmega808/809/1608/1609/3208/3209/4808/4809 - megaAVR 0-Series -> 6kB RAM
+