/* ----------------------------------------------------------------------------
 *         SAM Software Package License
 * ----------------------------------------------------------------------------
 * Copyright (c) 2012, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following condition is met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef _SAMA5_UART_COMPONENT_
#define _SAMA5_UART_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR Universal Asynchronous Receiver Transmitter */
/* ============================================================================= */
/** \addtogroup SAMA5_UART Universal Asynchronous Receiver Transmitter */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Uart hardware registers */
typedef struct {
  WoReg UART_CR;   /**< \brief (Uart Offset: 0x0000) Control Register */
  RwReg UART_MR;   /**< \brief (Uart Offset: 0x0004) Mode Register */
  WoReg UART_IER;  /**< \brief (Uart Offset: 0x0008) Interrupt Enable Register */
  WoReg UART_IDR;  /**< \brief (Uart Offset: 0x000C) Interrupt Disable Register */
  RoReg UART_IMR;  /**< \brief (Uart Offset: 0x0010) Interrupt Mask Register */
  RoReg UART_SR;   /**< \brief (Uart Offset: 0x0014) Status Register */
  RoReg UART_RHR;  /**< \brief (Uart Offset: 0x0018) Receive Holding Register */
  WoReg UART_THR;  /**< \brief (Uart Offset: 0x001C) Transmit Holding Register */
  RwReg UART_BRGR; /**< \brief (Uart Offset: 0x0020) Baud Rate Generator Register */
} Uart;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- UART_CR : (UART Offset: 0x0000) Control Register -------- */
#define UART_CR_RSTRX (0x1u << 2) /**< \brief (UART_CR) Reset Receiver */
#define UART_CR_RSTTX (0x1u << 3) /**< \brief (UART_CR) Reset Transmitter */
#define UART_CR_RXEN (0x1u << 4) /**< \brief (UART_CR) Receiver Enable */
#define UART_CR_RXDIS (0x1u << 5) /**< \brief (UART_CR) Receiver Disable */
#define UART_CR_TXEN (0x1u << 6) /**< \brief (UART_CR) Transmitter Enable */
#define UART_CR_TXDIS (0x1u << 7) /**< \brief (UART_CR) Transmitter Disable */
#define UART_CR_RSTSTA (0x1u << 8) /**< \brief (UART_CR) Reset Status Bits */
/* -------- UART_MR : (UART Offset: 0x0004) Mode Register -------- */
#define UART_MR_PAR_Pos 9
#define UART_MR_PAR_Msk (0x7u << UART_MR_PAR_Pos) /**< \brief (UART_MR) Parity Type */
#define   UART_MR_PAR_EVEN (0x0u << 9) /**< \brief (UART_MR) Even parity */
#define   UART_MR_PAR_ODD (0x1u << 9) /**< \brief (UART_MR) Odd parity */
#define   UART_MR_PAR_SPACE (0x2u << 9) /**< \brief (UART_MR) Space: parity forced to 0 */
#define   UART_MR_PAR_MARK (0x3u << 9) /**< \brief (UART_MR) Mark: parity forced to 1 */
#define   UART_MR_PAR_NO (0x4u << 9) /**< \brief (UART_MR) No parity */
#define UART_MR_CHMODE_Pos 14
#define UART_MR_CHMODE_Msk (0x3u << UART_MR_CHMODE_Pos) /**< \brief (UART_MR) Channel Mode */
#define   UART_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (UART_MR) Normal Mode */
#define   UART_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (UART_MR) Automatic Echo */
#define   UART_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (UART_MR) Local Loopback */
#define   UART_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (UART_MR) Remote Loopback */
/* -------- UART_IER : (UART Offset: 0x0008) Interrupt Enable Register -------- */
#define UART_IER_RXRDY (0x1u << 0) /**< \brief (UART_IER) Enable RXRDY Interrupt */
#define UART_IER_TXRDY (0x1u << 1) /**< \brief (UART_IER) Enable TXRDY Interrupt */
#define UART_IER_OVRE (0x1u << 5) /**< \brief (UART_IER) Enable Overrun Error Interrupt */
#define UART_IER_FRAME (0x1u << 6) /**< \brief (UART_IER) Enable Framing Error Interrupt */
#define UART_IER_PARE (0x1u << 7) /**< \brief (UART_IER) Enable Parity Error Interrupt */
#define UART_IER_TXEMPTY (0x1u << 9) /**< \brief (UART_IER) Enable TXEMPTY Interrupt */
/* -------- UART_IDR : (UART Offset: 0x000C) Interrupt Disable Register -------- */
#define UART_IDR_RXRDY (0x1u << 0) /**< \brief (UART_IDR) Disable RXRDY Interrupt */
#define UART_IDR_TXRDY (0x1u << 1) /**< \brief (UART_IDR) Disable TXRDY Interrupt */
#define UART_IDR_OVRE (0x1u << 5) /**< \brief (UART_IDR) Disable Overrun Error Interrupt */
#define UART_IDR_FRAME (0x1u << 6) /**< \brief (UART_IDR) Disable Framing Error Interrupt */
#define UART_IDR_PARE (0x1u << 7) /**< \brief (UART_IDR) Disable Parity Error Interrupt */
#define UART_IDR_TXEMPTY (0x1u << 9) /**< \brief (UART_IDR) Disable TXEMPTY Interrupt */
/* -------- UART_IMR : (UART Offset: 0x0010) Interrupt Mask Register -------- */
#define UART_IMR_RXRDY (0x1u << 0) /**< \brief (UART_IMR) Mask RXRDY Interrupt */
#define UART_IMR_TXRDY (0x1u << 1) /**< \brief (UART_IMR) Disable TXRDY Interrupt */
#define UART_IMR_OVRE (0x1u << 5) /**< \brief (UART_IMR) Mask Overrun Error Interrupt */
#define UART_IMR_FRAME (0x1u << 6) /**< \brief (UART_IMR) Mask Framing Error Interrupt */
#define UART_IMR_PARE (0x1u << 7) /**< \brief (UART_IMR) Mask Parity Error Interrupt */
#define UART_IMR_TXEMPTY (0x1u << 9) /**< \brief (UART_IMR) Mask TXEMPTY Interrupt */
/* -------- UART_SR : (UART Offset: 0x0014) Status Register -------- */
#define UART_SR_RXRDY (0x1u << 0) /**< \brief (UART_SR) Receiver Ready */
#define UART_SR_TXRDY (0x1u << 1) /**< \brief (UART_SR) Transmitter Ready */
#define UART_SR_OVRE (0x1u << 5) /**< \brief (UART_SR) Overrun Error */
#define UART_SR_FRAME (0x1u << 6) /**< \brief (UART_SR) Framing Error */
#define UART_SR_PARE (0x1u << 7) /**< \brief (UART_SR) Parity Error */
#define UART_SR_TXEMPTY (0x1u << 9) /**< \brief (UART_SR) Transmitter Empty */
/* -------- UART_RHR : (UART Offset: 0x0018) Receive Holding Register -------- */
#define UART_RHR_RXCHR_Pos 0
#define UART_RHR_RXCHR_Msk (0xffu << UART_RHR_RXCHR_Pos) /**< \brief (UART_RHR) Received Character */
/* -------- UART_THR : (UART Offset: 0x001C) Transmit Holding Register -------- */
#define UART_THR_TXCHR_Pos 0
#define UART_THR_TXCHR_Msk (0xffu << UART_THR_TXCHR_Pos) /**< \brief (UART_THR) Character to be Transmitted */
#define UART_THR_TXCHR(value) ((UART_THR_TXCHR_Msk & ((value) << UART_THR_TXCHR_Pos)))
/* -------- UART_BRGR : (UART Offset: 0x0020) Baud Rate Generator Register -------- */
#define UART_BRGR_CD_Pos 0
#define UART_BRGR_CD_Msk (0xffffu << UART_BRGR_CD_Pos) /**< \brief (UART_BRGR) Clock Divisor */
#define UART_BRGR_CD(value) ((UART_BRGR_CD_Msk & ((value) << UART_BRGR_CD_Pos)))

/*@}*/


#endif /* _SAMA5_UART_COMPONENT_ */