/******************************************************************************
*
* Copyright (C) 2013 - 2015 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xil_errata.h
*
* @addtogroup a9_errata Cortex A9 Processor and pl310 Errata Support
* @{
* Various ARM errata are handled in the standalone BSP. The implementation for
* errata handling follows ARM guidelines and is based on the open source Linux
* support for these errata.
*
* @note
* The errata handling is enabled by default. To disable handling of all the
* errata globally, un-define the macro ENABLE_ARM_ERRATA in xil_errata.h. To
* disable errata on a per-erratum basis, un-define relevant macros in
* xil_errata.h.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who  Date     Changes
* ----- ---- -------- -----------------------------------------------
* 1.00a srt  04/18/13 First release
* 6.6   mus  12/07/17 Removed errata 753970, It fixes CR#989132.
* </pre>
*
******************************************************************************/
#ifndef XIL_ERRATA_H
#define XIL_ERRATA_H

/**
 * @name errata_definitions
 *
 * The errata conditions handled in the standalone BSP are listed below
 * @{
 */

#define ENABLE_ARM_ERRATA 1

#ifdef ENABLE_ARM_ERRATA

/**
 *  Errata No: 	 742230
 *  Description: DMB operation may be faulty
 */
#define CONFIG_ARM_ERRATA_742230 1

/**
 *  Errata No: 	 743622
 *  Description: Faulty hazard checking in the Store Buffer may lead
 *	         	 to data corruption.
 */
#define CONFIG_ARM_ERRATA_743622 1

/**
 *  Errata No: 	 775420
 *  Description: A data cache maintenance operation which aborts,
 *		 		 might lead to deadlock
 */
#define CONFIG_ARM_ERRATA_775420 1

/**
 *  Errata No: 	 794073
 *  Description: Speculative instruction fetches with MMU disabled
 *               might not comply with architectural requirements
 */
#define CONFIG_ARM_ERRATA_794073 1


/** PL310 L2 Cache Errata */

/**
 *  Errata No: 	 588369
 *  Description: Clean & Invalidate maintenance operations do not
 *	   	 		 invalidate clean lines
 */
#define CONFIG_PL310_ERRATA_588369 1

/**
 *  Errata No: 	 727915
 *  Description: Background Clean and Invalidate by Way operation
 *		 can cause data corruption
 */
#define CONFIG_PL310_ERRATA_727915 1

/*@}*/
#endif  /* ENABLE_ARM_ERRATA */

#endif  /* XIL_ERRATA_H */
/**
* @} End of "addtogroup a9_errata".
*/