/*
 * -------------------------------------------
 *    CC3220 SDK - v0.10.00.00 
 * -------------------------------------------
 *
 *  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ 
 *  
 *  Redistribution and use in source and binary forms, with or without 
 *  modification, are permitted provided that the following conditions 
 *  are met:
 *
 *    Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the 
 *    documentation and/or other materials provided with the   
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *  
 */
//*****************************************************************************
//
//  cpu.c
//
//  Instruction wrappers for special CPU instructions needed by the
//
//
//*****************************************************************************
#include "cpu.h"

//*****************************************************************************
//
// Wrapper function for the CPSID instruction.  Returns the state of PRIMASK
// on entry.
//
//*****************************************************************************
#if defined(gcc)
unsigned long __attribute__((naked))
CPUcpsid(void)
{
    unsigned long ulRet;

    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsid   i\n"
          "    dsb      \n"
          "    isb      \n"
          "    bx      lr\n"
          : "=r" (ulRet));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ulRet);
}
#endif
#if defined(ewarm)
unsigned long
CPUcpsid(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsid   i\n"
          "    dsb      \n"
          "    isb      \n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(ccs)
unsigned long
CPUcpsid(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsid   i\n"
          "    dsb      \n"
          "    isb      \n"
          "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function returning the state of PRIMASK (indicating whether
// interrupts are enabled or disabled).
//
//*****************************************************************************
#if defined(gcc)
unsigned long __attribute__((naked))
CPUprimask(void)
{
    unsigned long ulRet;

    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    bx      lr\n"
          : "=r" (ulRet));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ulRet);
}
#endif
#if defined(ewarm)
unsigned long
CPUprimask(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(ccs)
unsigned long
CPUprimask(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function for the CPSIE instruction.  Returns the state of PRIMASK
// on entry.
//
//*****************************************************************************
#if defined(gcc)
unsigned long __attribute__((naked))
CPUcpsie(void)
{
    unsigned long ulRet;

    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsie   i\n"
          "    dsb      \n"
          "    isb      \n"
          "    bx      lr\n"
          : "=r" (ulRet));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ulRet);
}
#endif
#if defined(ewarm)
unsigned long
CPUcpsie(void)
{
    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsie   i\n"
          "    dsb      \n"
          "    isb      \n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(ccs)
unsigned long
CPUcpsie(void)
{
    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
          "    cpsie   i\n"
          "    dsb      \n"
          "    isb      \n"
          "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function for the WFI instruction.
//
//*****************************************************************************
#if defined(gcc)
void __attribute__((naked))
CPUwfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    dsb      \n"
          "    isb      \n"
          "    wfi      \n"
          "    bx      lr\n");
}
#endif
#if defined(ewarm)
void
CPUwfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    dsb      \n"
          "    isb      \n"
          "    wfi      \n");
}
#endif
#if defined(ccs)
void
CPUwfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    dsb      \n"
          "    isb      \n"
          "    wfi      \n");
}
#endif

//*****************************************************************************
//
// Wrapper function for writing the BASEPRI register.
//
//*****************************************************************************
#if defined(gcc)
void __attribute__((naked))
CPUbasepriSet(unsigned long ulNewBasepri)
{

    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n"
          "    dsb      \n"
          "    isb      \n"
          "    bx      lr\n");
}
#endif
#if defined(ewarm)
void
CPUbasepriSet(unsigned long ulNewBasepri)
{
    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n"
          "    dsb      \n"
          "    isb      \n");
}
#endif
#if defined(ccs)
void
CPUbasepriSet(unsigned long ulNewBasepri)
{
    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n"
          "    dsb      \n"
          "    isb      \n");
}
#endif

//*****************************************************************************
//
// Wrapper function for reading the BASEPRI register.
//
//*****************************************************************************
#if defined(gcc)
unsigned long __attribute__((naked))
CPUbasepriGet(void)
{
    unsigned long ulRet;

    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n"
          "    bx      lr\n"
          : "=r" (ulRet));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ulRet);
}
#endif
#if defined(ewarm)
unsigned long
CPUbasepriGet(void)
{
    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(ccs)
unsigned long
CPUbasepriGet(void)
{
    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n"
          "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif