/*
 * Copyright (c) 2015-2016, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/** ============================================================================
 *  @file       I2CCC32XX.h
 *
 *  @brief      I2C driver implementation for a CC32XX I2C controller.
 *
 *  The I2C header file should be included in an application as follows:
 *  @code
 *  #include <ti/drivers/I2C.h>
 *  #include <ti/drivers/i2c/I2CCC32XX.h>
 *  @endcode
 *
 *  Refer to @ref I2C.h for a complete description of APIs and usage.
 *
 *  ============================================================================
 */

#ifndef ti_drivers_i2c_I2CCC32XX__include
#define ti_drivers_i2c_I2CCC32XX__include

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include <stdbool.h>

#include <ti/drivers/I2C.h>
#include <ti/drivers/dpl/HwiP.h>
#include <ti/drivers/dpl/SemaphoreP.h>
#include <ti/drivers/Power.h>

/* macros defining possible I2C signal pin mux options */
#define I2CCC32XX_PIN_01_I2C_SCL  0x100 /*!< PIN 1 is used for I2C_SCL */
#define I2CCC32XX_PIN_02_I2C_SDA  0x101 /*!< PIN 2 is used for I2C_SDA */
#define I2CCC32XX_PIN_03_I2C_SCL  0x502 /*!< PIN 3 is used for I2C_SCL */
#define I2CCC32XX_PIN_04_I2C_SDA  0x503 /*!< PIN 4 is used for I2C_SDA */
#define I2CCC32XX_PIN_05_I2C_SCL  0x504 /*!< PIN 5 is used for I2C_SCL */
#define I2CCC32XX_PIN_06_I2C_SDA  0x505 /*!< PIN 6 is used for I2C_SDA */
#define I2CCC32XX_PIN_16_I2C_SCL  0x90F /*!< PIN 16 is used for I2C_SCL */
#define I2CCC32XX_PIN_17_I2C_SDA  0x910 /*!< PIN 17 is used for I2C_SDA */

/**
 *  @addtogroup I2C_STATUS
 *  I2CCC32XX_STATUS_* macros are command codes only defined in the
 *  I2CCC32XX.h driver implementation and need to:
 *  @code
 *  #include <ti/drivers/i2c/I2CCC32XX.h>
 *  @endcode
 *  @{
 */

/* Add I2CCC32XX_STATUS_* macros here */

/** @}*/

/**
 *  @addtogroup I2C_CMD
 *  I2CCC32XX_CMD_* macros are command codes only defined in the
 *  I2CCC32XX.h driver implementation and need to:
 *  @code
 *  #include <ti/drivers/i2c/I2CCC32XX.h>
 *  @endcode
 *  @{
 */

/* Add I2CCC32XX_CMD_* macros here */

/** @}*/

/* I2C function table pointer */
extern const I2C_FxnTable I2CCC32XX_fxnTable;

/*!
 *  @cond NODOC
 *  I2CCC32XX mode
 *
 *  This enum defines the state of the I2C driver's state machine.
 */
typedef enum I2CCC32XX_Mode {
    /*! I2C is idle, and not performing a transaction */
    I2CCC32XX_IDLE_MODE = 0,
    /*! I2C is currently performing a write operation */
    I2CCC32XX_WRITE_MODE,
    /*! I2C is currently performing a read operation */
    I2CCC32XX_READ_MODE,
    /*! I2C error has occurred */
    I2CCC32XX_ERROR = 0xFF
} I2CCC32XX_Mode;
/*! @endcond */

/*!
 *  @brief  I2CCC32XX Hardware attributes
 *
 *  The baseAddr and intNum fields define the base address and interrupt number
 *  of the I2C peripheral.  These values are used by driverlib APIs and
 *  therefore must be populated by driverlib macro definitions. These
 *  definitions are found in the header files:
 *      - inc/hw_memmap.h
 *      - inc/hw_ints.h
 *
 *  intPriority is the I2C peripheral's interrupt priority.
 *  This driver uses the ti.dpl interface instead of making OS calls directly,
 *  and the corresponding HwiP port handles the interrupt priority in an
 *  OS-specific way.  For example, in the case of the TI-RTOS kernel port,
 *  the intPriority is passed unmodified to Hwi_create() provided by the
 *  ti.sysbios.family.arm.m3.Hwi module; so the documentation for the
 *  ti.sysbios.family.arm.m3.Hwi module should be referenced for a description
 *  of usage of priority.
 *
 *  clkPin and dataPin define the pin multiplexing to be used for the SCL and
 *  SDA pins, respectively.  Macro values defined in this header file should
 *  be used for these fields.
 *
 *  A sample structure is shown below:
 *  @code
 *  const I2CCC32XX_HWAttrsV1 i2cCC32XXHWAttrs[] = {
 *      {
 *          .baseAddr = I2CA0_BASE,
 *          .intNum = INT_I2CA0,
 *          .intPriority = (~0),
 *          .clkPin = I2CCC32XX_PIN_01_I2C_SCL,
 *          .dataPin = I2CCC32XX_PIN_02_I2C_SDA,
 *      }
 *  };
 *  @endcode
 */
typedef struct I2CCC32XX_HWAttrsV1 {
    /*! I2C Peripheral's base address */
    unsigned int baseAddr;
    /*! I2C Peripheral's interrupt vector */
    unsigned int intNum;
    /*! I2C Peripheral's interrupt priority */
    unsigned int intPriority;
    /*! I2C clock pin configuration */
    uint16_t clkPin;
    /*! I2C data pin configuration */
    uint16_t dataPin;
} I2CCC32XX_HWAttrsV1;

/*!
 *  @cond NODOC
 *  I2CCC32XX Object.  Applications must not access any member variables of
 *  this structure!
 */
typedef struct I2CCC32XX_Object {
    SemaphoreP_Handle   mutex;            /* Grants exclusive access to I2C */
    SemaphoreP_Handle   transferComplete; /* Signals I2C transfer completion */

    HwiP_Handle         hwiHandle;

    I2C_TransferMode    transferMode;        /* Blocking or Callback mode */
    I2C_CallbackFxn     transferCallbackFxn; /* Callback function pointer */

    volatile I2CCC32XX_Mode mode;            /* Stores the I2C state */

    I2C_Transaction    *currentTransaction; /* Pointer to current transaction */

    uint8_t            *writeBufIdx;    /* Internal inc. writeBuf index */
    size_t              writeCountIdx;  /* Internal dec. writeCounter */

    uint8_t            *readBufIdx;     /* Internal inc. readBuf index */
    size_t              readCountIdx;   /* Internal dec. readCounter */

    /* I2C transaction pointers for I2C_MODE_CALLBACK */
    I2C_Transaction    *headPtr;        /* Head ptr for queued transactions */
    I2C_Transaction    *tailPtr;        /* Tail ptr for queued transactions */

    bool                isOpen;         /* Flag to indicate module is open */

    Power_NotifyObj     notifyObj;      /* For notification of wake from LPDS */
    I2C_BitRate         bitRate;        /* I2C bus bit rate */
} I2CCC32XX_Object;
/*! @endcond */

#ifdef __cplusplus
}
#endif

#endif /* ti_drivers_i2c_I2CCC32XX__include */