/*
 * Copyright (c) 2015-2016, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/** ============================================================================
 *  @file       UARTCC32XX.h
 *
 *  @brief      UART driver implementation for a CC32XX UART controller
 *
 *  The UART header file should be included in an application as follows:
 *  @code
 *  #include <ti/drivers/UART.h>
 *  #include <ti/drivers/uart/UARTCC32XX.h>
 *  @endcode
 *
 *  Refer to @ref UART.h for a complete description of APIs & example of use.
 *
 *  # Stack requirements #
 *  The UARTCC32XX driver is (ring) buffered driver, and stores data it may
 *  have already received in a user-supplied background buffer.
 *  @sa ::UARTCC32XX_HWAttrsV1
 *
 *  While permitted, it is STRONGLY suggested to avoid implementations where
 *  you call UART_read() within its own callback function (when in
 *  UART_MODE_CALLBACK).  Doing so, will require additional (task and system)
 *  stack for each nested UART_read() call.
 *
 *  Tool chain | Number of bytes per nested UART_read() call
 *  ---------- | ------------------------------------------------
 *  GNU        |  96 bytes + callback function stack requirements
 *  IAR        |  40 bytes + callback function stack requirements
 *  TI         |  80 bytes + callback function stack requirements
 *
 *  It is important to note a potential worst case scenario:
 *      A full ring buffer with data; say 32 bytes
 *      The callback function calls UART_read() with a size of 1 (byte)
 *      No other variables are allocated in the callback function
 *      No other function calls are made in the callback function
 *
 *  As a result, you need an additional task and system stack of:
 *  32 bytes  * (80 bytes for TI + 0 bytes by the callback function) = 2.5kB
 *
 *  # Device Specific Pin Mode Macros #
 *  This header file contains pin mode definitions used to specify the
 *  UART TX and RX pin assignment in the UARTCC32XX_HWAttrsV1 structure.
 *  Please refer to the CC32XX Techincal Reference Manual for details on pin
 *  multiplexing.  The bits in the pin mode macros are as follows:
 *  The lower 8 bits of the macro refer to the pin, offset by 1, to match
 *  driverlib pin defines.  For example, UARTCC32XX_PIN_01_UART1_TX & 0xff = 0,
 *  which equals PIN_01 in driverlib pin.h.  By matching the PIN_xx defines in
 *  driverlib pin.h, we can pass the pin directly to the driverlib functions.
 *  The upper 8 bits of the macro correspond to the pin mux confg mode
 *  value for the pin to operate in the UART mode.  For example, pin 1 is
 *  configured with mode 7 to operate as UART1 TX.
 *
 *  ============================================================================
 */

#ifndef ti_drivers_uart_UARTCC32XX__include
#define ti_drivers_uart_UARTCC32XX__include

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include <stdbool.h>

#include <ti/drivers/dpl/ClockP.h>
#include <ti/drivers/dpl/HwiP.h>
#include <ti/drivers/dpl/SemaphoreP.h>
#include <ti/drivers/Power.h>
#include <ti/drivers/UART.h>
#include <ti/drivers/utils/RingBuf.h>


#define UARTCC32XX_PIN_01_UART1_TX  0x700
#define UARTCC32XX_PIN_02_UART1_RX  0x701
#define UARTCC32XX_PIN_03_UART0_TX  0x702
#define UARTCC32XX_PIN_04_UART0_RX  0x703
#define UARTCC32XX_PIN_07_UART1_TX  0x506
#define UARTCC32XX_PIN_08_UART1_RX  0x507
#define UARTCC32XX_PIN_16_UART1_TX  0x20F
#define UARTCC32XX_PIN_17_UART1_RX  0x210
#define UARTCC32XX_PIN_45_UART0_RX  0x92C
#define UARTCC32XX_PIN_45_UART1_RX  0x22C
#define UARTCC32XX_PIN_53_UART0_TX  0x934
#define UARTCC32XX_PIN_55_UART0_TX  0x336
#define UARTCC32XX_PIN_55_UART1_TX  0x636
#define UARTCC32XX_PIN_57_UART0_RX  0x338
#define UARTCC32XX_PIN_57_UART1_RX  0x638
#define UARTCC32XX_PIN_58_UART1_TX  0x639
#define UARTCC32XX_PIN_59_UART1_RX  0x63A
#define UARTCC32XX_PIN_62_UART0_TX  0xB3D


/**
 *  @addtogroup UART_STATUS
 *  UARTCC32XX_STATUS_* macros are command codes only defined in the
 *  UARTCC32XX.h driver implementation and need to:
 *  @code
 *  #include <ti/drivers/uart/UARTCC32XX.h>
 *  @endcode
 *  @{
 */

/* Add UARTCC32XX_STATUS_* macros here */

/** @}*/

/**
 *  @addtogroup UART_CMD
 *  UARTCC32XX_CMD_* macros are command codes only defined in the
 *  UARTCC32XX.h driver implementation and need to:
 *  @code
 *  #include <ti/drivers/uart/UARTCC32XX.h>
 *  @endcode
 *  @{
 */

/*!
 * @brief Command used by UART_control to determines
 * whether the UART transmitter is busy or not
 *
 * With this command code, @b arg is a pointer to a @c bool.
 * @b *arg contains @c true if the UART is transmitting,
 * else @c false if all transmissions are complete.
 */
#define UARTCC32XX_CMD_IS_BUSY                  (UART_CMD_RESERVED + 0)


/*!
 * @brief Command used by UART_control to determines
 * if there are any characters in the receive FIFO
 *
 * With this command code, @b arg is a pointer to a @c bool.
 * @b *arg contains @c true if there is data in the receive FIFO,
 * or @c false if there is no data in the receive FIFO.
 */
#define UARTCC32XX_CMD_IS_RX_DATA_AVAILABLE     (UART_CMD_RESERVED + 1)


/*!
 * @brief Command used by UART_control to determines
 * if there is any space in the transmit FIFO
 *
 * With this command code, @b arg is a pointer to a @c bool.
 * @b *arg contains @c true if there is space available in the transmit FIFO,
 * or @c false if there is no space available in the transmit FIFO.
 */
#define UARTCC32XX_CMD_IS_TX_SPACE_AVAILABLE    (UART_CMD_RESERVED + 2)


/** @}*/

/* UART function table pointer */
extern const UART_FxnTable UARTCC32XX_fxnTable;

/*!
 *  @brief Complement set of read functions to be used by the UART ISR and
 *         UARTCC32XX_read(). Internal use only.
 *
 *  These functions are solely intended for the UARTCC32XX driver, and should
 *  not be used by the application.
 *  The UARTCC32XX_FxnSet is a pair of complement functions that are design to
 *  operate with one another in a task context and in an ISR context. The
 *  readTaskFxn is called by UARTCC32XX_read() to drain a circular buffer,
 *  whereas the readIsrFxn is used by the UARTCC32XX_hwiIntFxn to fill up the
 *  circular buffer.
 *
 *  readTaskFxn:    Function called by UART read
 *                  These variables are set and avilalable for use to the
 *                  readTaskFxn.
 *                  object->readBuf = buffer; //Pointer to a user buffer
 *                  object->readSize = size;  //Desired no. of bytes to read
 *                  object->readCount = size; //Remaining no. of bytes to read
 *
 *  readIsrFxn:     The required ISR counterpart to readTaskFxn
 */
typedef struct UARTCC32XX_FxnSet {
    bool (*readIsrFxn)  (UART_Handle handle);
    int  (*readTaskFxn) (UART_Handle handle);
} UARTCC32XX_FxnSet;

/*!
 *  @brief      UARTCC32XX Hardware attributes
 *
 *  The fields, baseAddr, intNum, and flowControl, are used by driverlib
 *  APIs and therefore must be populated by
 *  driverlib macro definitions. For CC32XXWare these definitions are found in:
 *      - inc/hw_memmap.h
 *      - inc/hw_ints.h
 *      - driverlib/uart.h
 *
 *  intPriority is the UART peripheral's interrupt priority, as defined by the
 *  underlying OS.  It is passed unmodified to the underlying OS's interrupt
 *  handler creation code, so you need to refer to the OS documentation
 *  for usage.  For example, for SYS/BIOS applications, refer to the
 *  ti.sysbios.family.arm.m3.Hwi documentation for SYS/BIOS usage of
 *  interrupt priorities.  If the driver uses the ti.dpl interface
 *  instead of making OS calls directly, then the HwiP port handles the
 *  interrupt priority in an OS specific way.  In the case of the SYS/BIOS
 *  port, intPriority is passed unmodified to Hwi_create().
 *
 *  A sample structure is shown below:
 *  @code
 *  unsigned char uartCC32XXRingBuffer[2][32];
 *
 *  const UARTCC32XX_HWAttrsV1 uartCC32XXHWAttrs[] = {
 *      {
 *          .baseAddr = UARTA0_BASE,
 *          .intNum = INT_UARTA0,
 *          .intPriority = (~0),
 *          .flowControl = UART_FLOWCONTROL_NONE,
 *          .ringBufPtr  = uartCC32XXRingBuffer[0],
 *          .ringBufSize = sizeof(uartCC32XXRingBuffer[0]),
 *          .rxPin = UARTCC32XX_PIN_57_UART0_RX,
 *          .txPin = UARTCC32XX_PIN_55_UART0_TX
 *      },
 *      {
 *          .baseAddr = UARTA1_BASE,
 *          .intNum = INT_UARTA1,
 *          .intPriority = (~0),
 *          .flowControl = UART_FLOWCONTROL_TX | UART_FLOWCONTROL_RX,
 *          .ringBufPtr  = uartCC32XXRingBuffer[1],
 *          .ringBufSize = sizeof(uartCC32XXRingBuffer[1]),
 *          .rxPin = UARTCC32XX_PIN_08_UART1_RX,
 *          .txPin = UARTCC32XX_PIN_07_UART1_TX
 *      },
 *  };
 *  @endcode
 */
typedef struct UARTCC32XX_HWAttrsV1 {
    /*! UART Peripheral's base address */
    unsigned int    baseAddr;
    /*! UART Peripheral's interrupt vector */
    unsigned int    intNum;
    /*! UART Peripheral's interrupt priority */
    unsigned int    intPriority;
    /*! Hardware flow control setting defined by driverlib */
    uint32_t        flowControl;
    /*! Pointer to an application ring buffer */
    unsigned char  *ringBufPtr;
    /*! Size of ringBufPtr */
    size_t          ringBufSize;
    /*! UART RX pin assignment */
    uint16_t        rxPin;
    /*! UART TX pin assignment */
    uint16_t        txPin;
} UARTCC32XX_HWAttrsV1;

/*!
 *  @brief      UARTCC32XX Object
 *
 *  The application must not access any member variables of this structure!
 */
typedef struct UARTCC32XX_Object {
    /* UART state variable */
    struct {
        bool             opened:1;         /* Has the obj been opened */
        UART_Mode        readMode:1;       /* Mode for all read calls */
        UART_Mode        writeMode:1;      /* Mode for all write calls */
        UART_DataMode    readDataMode:1;   /* Type of data being read */
        UART_DataMode    writeDataMode:1;  /* Type of data being written */
        UART_ReturnMode  readReturnMode:1; /* Receive return mode */
        UART_Echo        readEcho:1;       /* Echo received data back */
        /*
         * Flag to determine if a timeout has occurred when the user called
         * UART_read(). This flag is set by the timeoutClk clock object.
         */
        bool             bufTimeout:1;
        /*
         * Flag to determine when an ISR needs to perform a callback; in both
         * UART_MODE_BLOCKING or UART_MODE_CALLBACK
         */
        bool             callCallback:1;
        /*
         * Flag to determine if the ISR is in control draining the ring buffer
         * when in UART_MODE_CALLBACK
         */
        bool             drainByISR:1;
        /* Flag to keep the state of the read Power constraints */
        bool             rxEnabled:1;
        /* Flag to keep the state of the write Power constraints */
        bool             txEnabled:1;
    } state;

    HwiP_Handle          hwiHandle;        /* Hwi handle for interrupts */
    ClockP_Handle        timeoutClk;       /* Clock object to for timeouts */
    uint32_t             baudRate;         /* Baud rate for UART */
    UART_LEN             dataLength;       /* Data length for UART */
    UART_STOP            stopBits;         /* Stop bits for UART */
    UART_PAR             parityType;       /* Parity bit type for UART */

    /* UART read variables */
    RingBuf_Object       ringBuffer;       /* local circular buffer object */
    /* A complement pair of read functions for both the ISR and UART_read() */
    UARTCC32XX_FxnSet    readFxns;
    unsigned char       *readBuf;          /* Buffer data pointer */
    size_t               readSize;         /* Desired number of bytes to read */
    size_t               readCount;        /* Number of bytes left to read */
    SemaphoreP_Handle    readSem;          /* UART read semaphore */
    unsigned int         readTimeout;      /* Timeout for read semaphore */
    UART_Callback        readCallback;     /* Pointer to read callback */

    /* UART write variables */
    const unsigned char *writeBuf;         /* Buffer data pointer */
    size_t               writeSize;        /* Desired number of bytes to write*/
    size_t               writeCount;       /* Number of bytes left to write */
    SemaphoreP_Handle    writeSem;         /* UART write semaphore*/
    unsigned int         writeTimeout;     /* Timeout for write semaphore */
    UART_Callback        writeCallback;    /* Pointer to write callback */
    unsigned int         writeEmptyClkTimeout; /* TX FIFO timeout tick count */

    /* For Power management */
    ClockP_Handle        txFifoEmptyClk;   /* UART TX FIFO empty clock */
    Power_NotifyObj      postNotify;       /* LPDS wake-up notify object */
    unsigned int         powerMgrId;       /* Determined from base address */
} UARTCC32XX_Object, *UARTCC32XX_Handle;

#ifdef __cplusplus
}
#endif

#endif /* ti_drivers_uart_UARTCC32XX__include */