/**
  ******************************************************************************
  * @file    stm32h745i_discovery_qspi.h
  * @author  MCD Application Team
  * @brief   This file contains the common defines and functions prototypes for
  *          the stm32H745i_discovery_qspi.c driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/** @addtogroup BSP
  * @{
  */

/** @addtogroup STM32H745I_DISCOVERY
  * @{
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32H745I_DISCOVERY_QSPI_H
#define __STM32H745I_DISCOVERY_QSPI_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
#include "../Components/mt25tl01g/mt25tl01g.h"

/** @addtogroup STM32H745I_DISCOVERY_QSPI
  * @{
  */
 
/* Exported constants --------------------------------------------------------*/
/** @defgroup STM32H745I_DISCOVERY_QSPI_Exported_Constants Exported Constants
  * @{
  */

/* QSPI Error codes */
#define QSPI_OK            ((uint8_t)0x00)
#define QSPI_ERROR         ((uint8_t)0x01)
#define QSPI_BUSY          ((uint8_t)0x02)
#define QSPI_NOT_SUPPORTED ((uint8_t)0x04)
#define QSPI_SUSPENDED     ((uint8_t)0x08)


/* Definition for QSPI clock resources */
#define QSPI_CLK_ENABLE()              __HAL_RCC_QSPI_CLK_ENABLE()
#define QSPI_CLK_DISABLE()             __HAL_RCC_QSPI_CLK_DISABLE()
#define QSPI_CLK_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOF_CLK_ENABLE()
#define QSPI_BK1_CS_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOG_CLK_ENABLE()
#define QSPI_BK1_D0_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOD_CLK_ENABLE()
#define QSPI_BK1_D1_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOF_CLK_ENABLE()
#define QSPI_BK1_D2_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOF_CLK_ENABLE()
#define QSPI_BK1_D3_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOF_CLK_ENABLE()
#define QSPI_BK2_CS_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOG_CLK_ENABLE()
#define QSPI_BK2_D0_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOH_CLK_ENABLE()
#define QSPI_BK2_D1_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOH_CLK_ENABLE()
#define QSPI_BK2_D2_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOG_CLK_ENABLE()
#define QSPI_BK2_D3_GPIO_CLK_ENABLE()  __HAL_RCC_GPIOG_CLK_ENABLE()


#define QSPI_FORCE_RESET()         __HAL_RCC_QSPI_FORCE_RESET()
#define QSPI_RELEASE_RESET()       __HAL_RCC_QSPI_RELEASE_RESET()

/* Definition for QSPI Pins */
#define QSPI_CLK_PIN               GPIO_PIN_10
#define QSPI_CLK_GPIO_PORT         GPIOF
/* Bank 1 */
#define QSPI_BK1_CS_PIN            GPIO_PIN_6
#define QSPI_BK1_CS_GPIO_PORT      GPIOG
#define QSPI_BK1_D0_PIN            GPIO_PIN_11
#define QSPI_BK1_D0_GPIO_PORT      GPIOD
#define QSPI_BK1_D1_PIN            GPIO_PIN_9
#define QSPI_BK1_D1_GPIO_PORT      GPIOF
#define QSPI_BK1_D2_PIN            GPIO_PIN_7
#define QSPI_BK1_D2_GPIO_PORT      GPIOF
#define QSPI_BK1_D3_PIN            GPIO_PIN_6
#define QSPI_BK1_D3_GPIO_PORT      GPIOF

/* Bank 2 */
#define QSPI_BK2_CS_PIN            GPIO_PIN_6
#define QSPI_BK2_CS_GPIO_PORT      GPIOG
#define QSPI_BK2_D0_PIN            GPIO_PIN_2
#define QSPI_BK2_D0_GPIO_PORT      GPIOH
#define QSPI_BK2_D1_PIN            GPIO_PIN_3
#define QSPI_BK2_D1_GPIO_PORT      GPIOH
#define QSPI_BK2_D2_PIN            GPIO_PIN_9
#define QSPI_BK2_D2_GPIO_PORT      GPIOG
#define QSPI_BK2_D3_PIN            GPIO_PIN_14
#define QSPI_BK2_D3_GPIO_PORT      GPIOG


/* MT25TL01G Micron memory */
/* Size of the flash */
#define QSPI_FLASH_SIZE            26     /* Address bus width to access whole memory space */
#define QSPI_PAGE_SIZE             256

/* QSPI Base Address */
#define QSPI_BASE_ADDRESS          0x90000000

/**
  * @}
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup STM32H745I_DISCOVERY_QSPI_Exported_Types Exported Types
  * @{
  */
/* QSPI Info */
typedef struct {
  uint32_t FlashSize;          /*!< Size of the flash */
  uint32_t EraseSectorSize;    /*!< Size of sectors for the erase operation */
  uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */
  uint32_t ProgPageSize;       /*!< Size of pages for the program operation */
  uint32_t ProgPagesNumber;    /*!< Number of pages for the program operation */
} QSPI_Info;

/**
  * @}
  */


/* Exported functions --------------------------------------------------------*/
/** @addtogroup STM32H745I_DISCOVERY_QSPI_Exported_Functions
  * @{
  */
uint8_t BSP_QSPI_Init       (void);
uint8_t BSP_QSPI_DeInit     (void);
uint8_t BSP_QSPI_Read       (uint8_t* pData, uint32_t ReadAddr, uint32_t Size);
uint8_t BSP_QSPI_Write      (uint8_t* pData, uint32_t WriteAddr, uint32_t Size);
uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress);
uint8_t BSP_QSPI_Erase_Chip (void);
uint8_t BSP_QSPI_GetStatus  (void);
uint8_t BSP_QSPI_GetInfo    (QSPI_Info* pInfo);
uint8_t BSP_QSPI_EnableMemoryMappedMode(void);

/* These functions can be modified in case the current settings
   need to be changed for specific application needs */
void BSP_QSPI_MspInit(QSPI_HandleTypeDef *hqspi, void *Params);
void BSP_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi, void *Params);

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32H745I_DISCOVERY_QSPI_H */
/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/