/**
  ******************************************************************************
  * @file    stm32h7xx_hal_def.h
  * @author  MCD Application Team
  * @brief   This file contains HAL common defines, enumeration, macros and
  *          structures definitions.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_DEF
#define STM32H7xx_HAL_DEF

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx.h"
//#include "Legacy/stm32_hal_legacy.h"
#include <stddef.h>
#include <math.h>

/* Exported types ------------------------------------------------------------*/

/**
  * @brief  HAL Status structures definition
  */
typedef enum
{
  HAL_OK       = 0x00,
  HAL_ERROR    = 0x01,
  HAL_BUSY     = 0x02,
  HAL_TIMEOUT  = 0x03
} HAL_StatusTypeDef;

/**
  * @brief  HAL Lock structures definition
  */
typedef enum
{
  HAL_UNLOCKED = 0x00,
  HAL_LOCKED   = 0x01
} HAL_LockTypeDef;

/* Exported macro ------------------------------------------------------------*/

#define HAL_MAX_DELAY      0xFFFFFFFFU

#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)

#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
                        do{                                                      \
                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
                          } while(0)

#define UNUSED(x) ((void)(x))

/** @brief Reset the Handle's State field.
  * @param __HANDLE__: specifies the Peripheral Handle.
  * @note  This macro can be used for the following purpose:
  *          - When the Handle is declared as local variable; before passing it as parameter
  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
  *            to set to 0 the Handle's "State" field.
  *            Otherwise, "State" field may have any random value and the first time the function
  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
  *            (i.e. HAL_PPP_MspInit() will not be executed).
  *          - When there is a need to reconfigure the low level hardware: instead of calling
  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
  * @retval None
  */
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)

#if (USE_RTOS == 1)
  #error " USE_RTOS should be 0 in the current HAL release "
#else
  #define __HAL_LOCK(__HANDLE__)                                           \
                                do{                                        \
                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
                                    {                                      \
                                       return HAL_BUSY;                    \
                                    }                                      \
                                    else                                   \
                                    {                                      \
                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
                                    }                                      \
                                  }while (0)

  #define __HAL_UNLOCK(__HANDLE__)                                          \
                                  do{                                       \
                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
                                    }while (0)
#endif /* USE_RTOS */

#if  defined ( __GNUC__ )
  #ifndef __weak
    #define __weak   __attribute__((weak))
  #endif /* __weak */
  #ifndef __packed
    #define __packed __attribute__((__packed__))
  #endif /* __packed */
#endif /* __GNUC__ */


/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
#if defined   (__GNUC__)        /* GNU Compiler */
  #ifndef __ALIGN_END
    #define __ALIGN_END    __attribute__ ((aligned (4)))
  #endif /* __ALIGN_END */
  #ifndef __ALIGN_BEGIN
    #define __ALIGN_BEGIN
  #endif /* __ALIGN_BEGIN */
#else
  #ifndef __ALIGN_END
    #define __ALIGN_END
  #endif /* __ALIGN_END */
  #ifndef __ALIGN_BEGIN
    #if defined   (__CC_ARM)      /* ARM Compiler */
      #define __ALIGN_BEGIN    __align(4)
    #elif defined (__ICCARM__)    /* IAR Compiler */
      #define __ALIGN_BEGIN
    #endif /* __CC_ARM */
  #endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */

/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
#if defined   (__GNUC__)        /* GNU Compiler */
  #define ALIGN_32BYTES(buf)  buf __attribute__ ((aligned (32)))
#elif defined (__ICCARM__)    /* IAR Compiler */
  #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
#elif defined   (__CC_ARM)      /* ARM Compiler */
  #define ALIGN_32BYTES(buf) __align(32) buf
#endif

/**
  * @brief  __RAM_FUNC definition
  */
#if defined ( __CC_ARM   )
/* ARM Compiler
   ------------
   RAM functions are defined using the toolchain options.
   Functions that are executed in RAM should reside in a separate source module.
   Using the 'Options for File' dialog you can simply change the 'Code / Const'
   area of a module to a memory space in physical RAM.
   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
   dialog.
*/
#define __RAM_FUNC

#elif defined ( __ICCARM__ )
/* ICCARM Compiler
   ---------------
   RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc

#elif defined   (  __GNUC__  )
/* GNU Compiler
   ------------
  RAM functions are defined using a specific toolchain attribute
   "__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC __attribute__((section(".RamFunc")))

#endif

#ifdef __cplusplus
}
#endif

#endif /* STM32H7xx_HAL_DEF */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/