/**
 * \file
 *
 * \brief Chip-specific PLL definitions.
 *
 * Copyright (c) 2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifndef CHIP_PLL_H_INCLUDED
#define CHIP_PLL_H_INCLUDED

#include <osc.h>

/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
extern "C" {
#endif
/**INDENT-ON**/
/// @endcond

/**
 * \weakgroup pll_group
 * @{
 */

#define PLL_OUTPUT_MIN_HZ       160000000
#define PLL_OUTPUT_MAX_HZ       500000000

#define PLL_INPUT_MIN_HZ        3000000
#define PLL_INPUT_MAX_HZ        32000000

#define NR_PLLS             2
#define PLLA_ID             0
#define UPLL_ID             1   //!< USB UTMI PLL.

#define PLL_UPLL_HZ     480000000

#define PLL_COUNT   0x3fU

enum pll_source {
	PLL_SRC_MAINCK_4M_RC   = OSC_MAINCK_4M_RC,  //!< Internal 4MHz RC oscillator.
	PLL_SRC_MAINCK_8M_RC   = OSC_MAINCK_8M_RC,  //!< Internal 8MHz RC oscillator.
	PLL_SRC_MAINCK_12M_RC  = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator.
	PLL_SRC_MAINCK_XTAL    = OSC_MAINCK_XTAL,   //!< External crystal oscillator.
	PLL_SRC_MAINCK_BYPASS  = OSC_MAINCK_BYPASS, //!< External bypass oscillator.
	PLL_NR_SOURCES,                             //!< Number of PLL sources.
};

struct pll_config {
	uint32_t ctrl;
};

#define pll_get_default_rate(pll_id)                                     \
	((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE)                      \
			* CONFIG_PLL##pll_id##_MUL)                      \
			/ CONFIG_PLL##pll_id##_DIV)

/* Force UTMI PLL parameters (Hardware defined) */
#ifdef CONFIG_PLL1_SOURCE
# undef CONFIG_PLL1_SOURCE
#endif
#ifdef CONFIG_PLL1_MUL
# undef CONFIG_PLL1_MUL
#endif
#ifdef CONFIG_PLL1_DIV
# undef CONFIG_PLL1_DIV
#endif
#define CONFIG_PLL1_SOURCE  PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL1_MUL     0
#define CONFIG_PLL1_DIV     0

/**
 * \note The SAMV71 PLL hardware interprets mul as mul+1. For readability the
 * hardware mul+1 is hidden in this implementation. Use mul as mul effective
 * value.
 */
static inline void pll_config_init(struct pll_config *p_cfg,
		enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul)
{
	uint32_t vco_hz;

	Assert(e_src < PLL_NR_SOURCES);

	if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */
		p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT);
	} else { /* PLLA */
	/* Calculate internal VCO frequency */
	vco_hz = osc_get_rate(e_src) / ul_div;
	Assert(vco_hz >= PLL_INPUT_MIN_HZ);
	Assert(vco_hz <= PLL_INPUT_MAX_HZ);

	vco_hz *= ul_mul;
	Assert(vco_hz >= PLL_OUTPUT_MIN_HZ);
	Assert(vco_hz <= PLL_OUTPUT_MAX_HZ);

	/* PMC hardware will automatically make it mul+1 */
		p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div)  \
		| CKGR_PLLAR_PLLACOUNT(PLL_COUNT);
	}
}

#define pll_config_defaults(cfg, pll_id)                                 \
	pll_config_init(cfg,                                             \
			CONFIG_PLL##pll_id##_SOURCE,                     \
			CONFIG_PLL##pll_id##_DIV,                        \
			CONFIG_PLL##pll_id##_MUL)

static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id)
{
	Assert(ul_pll_id < NR_PLLS);

	if (ul_pll_id == PLLA_ID) {
		p_cfg->ctrl = PMC->CKGR_PLLAR;
	} else {
		p_cfg->ctrl = PMC->CKGR_UCKR;
	}
}

static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id)
{
	Assert(ul_pll_id < NR_PLLS);

	if (ul_pll_id == PLLA_ID) {
		pmc_disable_pllack(); // Always stop PLL first!
		PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
	} else {
		PMC->CKGR_UCKR = p_cfg->ctrl;
	}
}

static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id)
{
	Assert(ul_pll_id < NR_PLLS);

	if (ul_pll_id == PLLA_ID) {
		pmc_disable_pllack(); // Always stop PLL first!
		PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
	} else {
		PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
	}
}

/**
 * \note This will only disable the selected PLL, not the underlying oscillator (mainck).
 */
static inline void pll_disable(uint32_t ul_pll_id)
{
	Assert(ul_pll_id < NR_PLLS);

	if (ul_pll_id == PLLA_ID) {
		pmc_disable_pllack();
	} else {
		PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN;
	}
}

static inline uint32_t pll_is_locked(uint32_t ul_pll_id)
{
	Assert(ul_pll_id < NR_PLLS);

	if (ul_pll_id == PLLA_ID) {
	return pmc_is_locked_pllack();
	} else {
		return pmc_is_locked_upll();
	}
}

static inline void pll_enable_source(enum pll_source e_src)
{
	switch (e_src) {
	case PLL_SRC_MAINCK_4M_RC:
	case PLL_SRC_MAINCK_8M_RC:
	case PLL_SRC_MAINCK_12M_RC:
	case PLL_SRC_MAINCK_XTAL:
	case PLL_SRC_MAINCK_BYPASS:
		osc_enable(e_src);
		osc_wait_ready(e_src);
		break;

	default:
		Assert(false);
		break;
	}
}

static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
{
	struct pll_config pllcfg;

	if (pll_is_locked(ul_pll_id)) {
		return; // Pll already running
	}
	switch (ul_pll_id) {
#ifdef CONFIG_PLL0_SOURCE
	case 0:
		pll_enable_source(CONFIG_PLL0_SOURCE);
		pll_config_init(&pllcfg,
				CONFIG_PLL0_SOURCE,
				CONFIG_PLL0_DIV,
				CONFIG_PLL0_MUL);
		break;
#endif
#ifdef CONFIG_PLL1_SOURCE
	case 1:
		pll_enable_source(CONFIG_PLL1_SOURCE);
		pll_config_init(&pllcfg,
				CONFIG_PLL1_SOURCE,
				CONFIG_PLL1_DIV,
				CONFIG_PLL1_MUL);
		break;
#endif
	default:
		Assert(false);
		break;
	}
	pll_enable(&pllcfg, ul_pll_id);
	while (!pll_is_locked(ul_pll_id));
}

//! @}

/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
}
#endif
/**INDENT-ON**/
/// @endcond

#endif /* CHIP_PLL_H_INCLUDED */