/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2018 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _BOARD_H_
#define _BOARD_H_

#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_gpio.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "LPC54018-IoT-Module"

#define BOARD_EXTCLKINRATE (0)

/*! @brief The UART to use for debug messages. */
/* TODO: rename UART to USART */
#ifndef BOARD_DEBUG_UART_TYPE
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#endif

#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetFlexCommClkFreq(0U)
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
#define BOARD_UART_IRQ FLEXCOMM0_IRQn
/* TODO: obsolete */
#define BOARD_DEBUG_SPI_CLK_FREQ 12000000

#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200
#endif /* BOARD_DEBUG_UART_BAUDRATE */

#define BOARD_ACCEL_I2C_BASEADDR I2C2
#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000

#define BOARD_CODEC_I2C_BASEADDR I2C2
#define BOARD_CODEC_I2C_INSTANCE 2U
#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000

/*! @brief The ENET PHY address. */
#define BOARD_ENET0_PHY_ADDRESS (0x00U) /* Phy address of enet port 0. */

#ifndef BOARD_LED1_GPIO
#define BOARD_LED1_GPIO GPIO
#endif
#define BOARD_LED1_GPIO_PORT 3U
#ifndef BOARD_LED1_GPIO_PIN
#define BOARD_LED1_GPIO_PIN 14U
#endif

#ifndef BOARD_LED2_GPIO
#define BOARD_LED2_GPIO GPIO
#endif
#define BOARD_LED2_GPIO_PORT 3U
#ifndef BOARD_LED2_GPIO_PIN
#define BOARD_LED2_GPIO_PIN 3U
#endif
#ifndef BOARD_LED3_GPIO
#define BOARD_LED3_GPIO GPIO
#endif
#define BOARD_LED3_GPIO_PORT 3U
#ifndef BOARD_LED3_GPIO_PIN
#define BOARD_LED3_GPIO_PIN 13U
#endif

#ifndef BOARD_SW1_GPIO
#define BOARD_SW1_GPIO GPIO
#endif
#define BOARD_SW1_GPIO_PORT 0U
#ifndef BOARD_SW1_GPIO_PIN
#define BOARD_SW1_GPIO_PIN 4U
#endif
#define BOARD_SW1_NAME "SW1"
#define BOARD_SW3_IRQ PIN_INT0_IRQn
#define BOARD_SW3_IRQ_HANDLER PIN_INT0_IRQHandler

#ifndef BOARD_SW2_GPIO
#define BOARD_SW2_GPIO GPIO
#endif
#define BOARD_SW2_GPIO_PORT 0U
#ifndef BOARD_SW2_GPIO_PIN
#define BOARD_SW2_GPIO_PIN 6U
#endif
#define BOARD_SW2_NAME "SW2"
#define BOARD_SW2_IRQ PIN_INT0_IRQn
#define BOARD_SW2_IRQ_HANDLER PIN_INT0_IRQHandler

#ifndef BOARD_SW3_GPIO
#define BOARD_SW3_GPIO GPIO
#endif
#define BOARD_SW3_GPIO_PORT 0U
#ifndef BOARD_SW3_GPIO_PIN
#define BOARD_SW3_GPIO_PIN 5U
#endif
#define BOARD_SW3_NAME "SW3"
#define BOARD_SW3_IRQ PIN_INT0_IRQn
#define BOARD_SW3_IRQ_HANDLER PIN_INT0_IRQHandler
#define BOARD_SW3_GPIO_PININT_INDEX 0

#ifndef BOARD_SW4_GPIO
#define BOARD_SW4_GPIO GPIO
#endif
#ifndef BOARD_SW4_GPIO_PORT
#define BOARD_SW4_GPIO_PORT 0U
#endif
#ifndef BOARD_SW4_GPIO_PIN
#define BOARD_SW4_GPIO_PIN 4U
#endif
#define BOARD_SW4_NAME "SW4"
#define BOARD_SW4_IRQ PIN_INT0_IRQn
#define BOARD_SW4_IRQ_HANDLER PIN_INT0_IRQHandler
#define BOARD_SW4_GPIO_PININT_INDEX 0

#ifndef BOARD_SW5_GPIO
#define BOARD_SW5_GPIO GPIO
#endif
#ifndef BOARD_SW5_GPIO_PORT
#define BOARD_SW5_GPIO_PORT 1U
#endif
#ifndef BOARD_SW5_GPIO_PIN
#define BOARD_SW5_GPIO_PIN 1U
#endif
#define BOARD_SW5_NAME "SW5"
#define BOARD_SW5_IRQ PIN_INT1_IRQn
#define BOARD_SW5_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW5_GPIO_PININT_INDEX 0

#define BOARD_SDIF_BASEADDR SDIF
#define BOARD_SDIF_CLK_FREQ CLOCK_GetSdioClkFreq()
#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
#define BOARD_SDIF_IRQ SDIO_IRQn

#define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360
#define BOARD_SD_CARD_DETECT_PIN 10
#define BOARD_SD_CARD_DETECT_PORT 2
#define BOARD_SD_CARD_DETECT_GPIO GPIO
#define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD

#define BOARD_SDIF_CD_GPIO_INIT()                                                                    \
    {                                                                                                \
        CLOCK_EnableClock(kCLOCK_Gpio2);                                                             \
        GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \
                     &(gpio_pin_config_t){kGPIO_DigitalInput, 0U});                                  \
    }
#define BOARD_SDIF_CD_STATUS() \
    GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN)

/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U

#define LED1_INIT(output)                                                    \
    GPIO_PinInit(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, BOARD_LED1_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
#define LED1_ON() \
    GPIO_PortClear(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Turn on target LED1 */
#define LED1_OFF() \
    GPIO_PortSet(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Turn off target LED1 */
#define LED1_TOGGLE() \
    GPIO_PortToggle(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Toggle on target LED1 */
#define LED2_INIT(output)                                                    \
    GPIO_PinInit(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, BOARD_LED2_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED2 */
#define LED2_ON() \
    GPIO_PortClear(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Turn on target LED2 */
#define LED2_OFF() \
    GPIO_PortSet(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Turn off target LED2 */
#define LED2_TOGGLE() \
    GPIO_PortToggle(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Toggle on target LED2 */

#define LED3_INIT(output)                                                    \
    GPIO_PinInit(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, BOARD_LED3_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED3 */
#define LED3_ON() \
    GPIO_PortClear(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Turn on target LED3 */
#define LED3_OFF() \
    GPIO_PortSet(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Turn off target LED3 */
#define LED3_TOGGLE() \
    GPIO_PortToggle(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Toggle on target LED3 */

#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*******************************************************************************
 * API
 ******************************************************************************/

status_t BOARD_InitDebugConsole(void);
void BOARD_InitSDRAM(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_I2C_Send(I2C_Type *base,
                        uint8_t deviceAddress,
                        uint32_t subAddress,
                        uint8_t subaddressSize,
                        uint8_t *txBuff,
                        uint8_t txBuffSize);
status_t BOARD_I2C_Receive(I2C_Type *base,
                           uint8_t deviceAddress,
                           uint32_t subAddress,
                           uint8_t subaddressSize,
                           uint8_t *rxBuff,
                           uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */

#if defined(__cplusplus)
}
#endif /* __cplusplus */

#endif /* _BOARD_H_ */