/*
 * Copyright 2017-2018 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _BOARD_H_
#define _BOARD_H_

#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_reset.h"
#include "fsl_gpio.h"
#include "fsl_iocon.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "LPCXpresso5500"

/*! @brief The UART to use for debug messages. */
/* TODO: rename UART to USART */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_Flexcomm0
#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
#define BOARD_UART_IRQ FLEXCOMM0_IRQn

#define BOARD_ACCEL_I2C_BASEADDR I2C4
#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000

#define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART1
#define BOARD_DEBUG_UART_INSTANCE_CORE1 1U
#define BOARD_DEBUG_UART_CLK_FREQ_CORE1 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kFRO12M_to_FLEXCOMM1
#define BOARD_DEBUG_UART_RST_CORE1 kFC1_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC_CORE1 kCLOCK_Flexcomm1
#define BOARD_UART_IRQ_HANDLER_CORE1 FLEXCOMM1_IRQHandler
#define BOARD_UART_IRQ_CORE1 FLEXCOMM1_IRQn

#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE */

#ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1
#define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */

#define BOARD_CODEC_I2C_BASEADDR I2C4
#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000

#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIO
#endif
#define BOARD_LED_RED_GPIO_PORT 1U
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 6U
#endif

#ifndef BOARD_LED_BLUE_GPIO
#define BOARD_LED_BLUE_GPIO GPIO
#endif
#define BOARD_LED_BLUE_GPIO_PORT 1U
#ifndef BOARD_LED_BLUE_GPIO_PIN
#define BOARD_LED_BLUE_GPIO_PIN 4U
#endif

#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIO
#endif
#define BOARD_LED_GREEN_GPIO_PORT 1U
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 7U
#endif

#ifndef BOARD_SW1_GPIO
#define BOARD_SW1_GPIO GPIO
#endif
#define BOARD_SW1_GPIO_PORT 0U
#ifndef BOARD_SW1_GPIO_PIN
#define BOARD_SW1_GPIO_PIN 5U
#endif
#define BOARD_SW1_NAME "SW1"
#define BOARD_SW1_IRQ PIN_INT0_IRQn
#define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler

#ifndef BOARD_SW2_GPIO
#define BOARD_SW2_GPIO GPIO
#endif
#define BOARD_SW2_GPIO_PORT 1U
#ifndef BOARD_SW2_GPIO_PIN
#define BOARD_SW2_GPIO_PIN 18U
#endif
#define BOARD_SW2_NAME "SW2"
#define BOARD_SW2_IRQ PIN_INT1_IRQn
#define BOARD_SW2_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW2_GPIO_PININT_INDEX 1

#ifndef BOARD_SW3_GPIO
#define BOARD_SW3_GPIO GPIO
#endif
#define BOARD_SW3_GPIO_PORT 1U
#ifndef BOARD_SW3_GPIO_PIN
#define BOARD_SW3_GPIO_PIN 9U
#endif
#define BOARD_SW3_NAME "SW3"
#define BOARD_SW3_IRQ PIN_INT1_IRQn
#define BOARD_SW3_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW3_GPIO_PININT_INDEX 1

#define BOARD_SDIF_BASEADDR SDIF
#define BOARD_SDIF_CLKSRC kCLOCK_SDio
#define BOARD_SDIF_CLK_FREQ CLOCK_GetFreq(kCLOCK_SDio)
#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
#define BOARD_SDIF_IRQ SDIO_IRQn
#define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360
#define BOARD_SD_CARD_DETECT_PIN 17
#define BOARD_SD_CARD_DETECT_PORT 0
#define BOARD_SD_CARD_DETECT_GPIO GPIO
#define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD

#define BOARD_SDIF_CD_GPIO_INIT()                                                                    \
    {                                                                                                \
        CLOCK_EnableClock(kCLOCK_Gpio2);                                                             \
        GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \
                     &(gpio_pin_config_t){kGPIO_DigitalInput, 0U});                                  \
    }
#define BOARD_SDIF_CD_STATUS() \
    GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN)

/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U

#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK

#define LED_RED_INIT(output)                                                          \
    {                                                                                 \
    IOCON_PinMuxSet(IOCON, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN,           \
        (IOCON_PIO_FUNC0 |IOCON_PIO_MODE_INACT |IOCON_PIO_SLEW_STANDARD |IOCON_PIO_INV_DI |IOCON_PIO_DIGITAL_EN |IOCON_PIO_OPENDRAIN_DI));  \
    GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */  \
    }
#define LED_RED_ON()                                            \
    GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
                   1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_RED_OFF()                                                                        \
    GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT,                                \
                 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED1 \ \ \ \ \ \ \ \ \ \ \
                                                            */
#define LED_RED_TOGGLE()                                         \
    GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
                    1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED1 */

#define LED_BLUE_INIT(output)                                                            \
    {                                                                                    \
    IOCON_PinMuxSet(IOCON, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN,            \
        (IOCON_PIO_FUNC0 |IOCON_PIO_MODE_INACT |IOCON_PIO_SLEW_STANDARD |IOCON_PIO_INV_DI |IOCON_PIO_DIGITAL_EN |IOCON_PIO_OPENDRAIN_DI));  \
    GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */  \
    }
#define LED_BLUE_ON()                                             \
    GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
                   1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_BLUE_OFF()                                          \
    GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
                 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_BLUE_TOGGLE()                                          \
    GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
                    1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED1 */

#define LED_GREEN_INIT(output)                                                              \
    GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
                 &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
#define LED_GREEN_ON()                                              \
    GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
                   1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_GREEN_OFF()                                           \
    GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
                 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_GREEN_TOGGLE()                                           \
    GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
                    1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED1 */

/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITGT202SHIELD_PWRON_GPIO GPIO
#define BOARD_INITGT202SHIELD_PWRON_PORT 1U
#define BOARD_INITGT202SHIELD_PWRON_PIN 8U

#define BOARD_INITGT202SHIELD_IRQ_GPIO GPIO
#define BOARD_INITGT202SHIELD_IRQ_PORT 1U
#define BOARD_INITGT202SHIELD_IRQ_PIN 9U

/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO
#define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U
#define BOARD_INITSILEX2401SHIELD_PWRON_PIN 7U

#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO
#define BOARD_INITSILEX2401SHIELD_IRQ_PORT 0U
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 15U

#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*******************************************************************************
 * API
 ******************************************************************************/

void BOARD_InitDebugConsole(void);
void BOARD_InitDebugConsole_Core1(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_I2C_Send(I2C_Type *base,
                        uint8_t deviceAddress,
                        uint32_t subAddress,
                        uint8_t subaddressSize,
                        uint8_t *txBuff,
                        uint8_t txBuffSize);
status_t BOARD_I2C_Receive(I2C_Type *base,
                           uint8_t deviceAddress,
                           uint32_t subAddress,
                           uint8_t subaddressSize,
                           uint8_t *rxBuff,
                           uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */

#if defined(__cplusplus)
}
#endif /* __cplusplus */

#endif /* _BOARD_H_ */