/*
 * Copyright 2017 - 2018 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */
#ifndef _FSL_DEBUG_CONSOLE_CONF_H_
#define _FSL_DEBUG_CONSOLE_CONF_H_

/****************Debug console configuration********************/

/*! @brief If Non-blocking mode is needed, please define it at project setting,
* otherwise blocking mode is the default transfer mode.
* Warning: If you want to use non-blocking transfer,please make sure the corresponding
* IO interrupt is enable, otherwise there is no output.
* And non-blocking is combine with buffer, no matter bare-metal or rtos.
*/
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
/*! @brief define the transmit buffer length which is used to store the multi task log, buffer is enabled automatically
* when
* non-blocking transfer is using,
* This value will affect the RAM's ultilization, should be set per paltform's capability and software requirement.
* If it is configured too small, log maybe missed , because the log will not be
* buffered if the buffer is full, and the print will return immediately with -1.
* And this value should be multiple of 4 to meet memory alignment.
*
*/
#ifndef DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN
#define DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN (512U)
#endif /* DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN */

/*! @brief define the receive buffer length which is used to store the user input, buffer is enabled automatically when
* non-blocking transfer is using,
* This value will affect the RAM's ultilization, should be set per paltform's capability and software requirement.
* If it is configured too small, log maybe missed, because buffer will be overwrited if buffer is too small.
* And this value should be multiple of 4 to meet memory alignment.
*
*/
#ifndef DEBUG_CONSOLE_RECEIVE_BUFFER_LEN
#define DEBUG_CONSOLE_RECEIVE_BUFFER_LEN (512U)
#endif /* DEBUG_CONSOLE_RECEIVE_BUFFER_LEN */

#else
#define DEBUG_CONSOLE_TRANSFER_BLOCKING
#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */

/*!@ brief Whether enable the RX function
* If the macro is zero, the receive function of the debug console is disabled.
*/
#ifndef DEBUG_CONSOLE_RX_ENABLE
#define DEBUG_CONSOLE_RX_ENABLE (1U)
#endif /* DEBUG_CONSOLE_RX_ENABLE */

/*!@ brief define the MAX log length debug console support , that is when you call printf("log", x);, the log
* length can not bigger than this value.
* This macro decide the local log buffer length, the buffer locate at stack, the stack maybe overflow if
* the buffer is too big and current task stack size not big enough.
*/
#ifndef DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN
#define DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN (128U)
#endif /* DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN */

/*!@ brief define the buffer support buffer scanf log length, that is when you call scanf("log", &x);, the log
* length can not bigger than this value.
* As same as the DEBUG_CONSOLE_BUFFER_PRINTF_MAX_LOG_LEN.
*/
#ifndef DEBUG_CONSOLE_SCANF_MAX_LOG_LEN
#define DEBUG_CONSOLE_SCANF_MAX_LOG_LEN (20U)
#endif /* DEBUG_CONSOLE_SCANF_MAX_LOG_LEN */

/*! @brief Debug console synchronization
* User should not change these macro for synchronization mode, but add the
* corresponding synchronization mechanism per different software environment.
* Such as, if another RTOS is used,
* add:
*  #define DEBUG_CONSOLE_SYNCHRONIZATION_XXXX 3
* in this configuration file and implement the synchronization in fsl.log.c.
*/
/*! @brief synchronization for baremetal software */
#define DEBUG_CONSOLE_SYNCHRONIZATION_BM 0
/*! @brief synchronization for freertos software */
#define DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS 1

/*! @brief RTOS synchronization mechanism disable
* If not defined, default is enable, to avoid multitask log print mess.
* If other RTOS is used, you can implement the RTOS's specific synchronization mechanism in fsl.log.c
* If synchronization is disabled, log maybe messed on terminal.
*/
#ifndef DEBUG_CONSOLE_DISABLE_RTOS_SYNCHRONIZATION
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
#ifdef FSL_RTOS_FREE_RTOS
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS
#else
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
#endif /* FSL_RTOS_FREE_RTOS */
#else
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */
#endif /* DEBUG_CONSOLE_DISABLE_RTOS_SYNCHRONIZATION */

/*! @brief echo function support
* If you want to use the echo function,please define DEBUG_CONSOLE_ENABLE_ECHO
* at your project setting.
*/
#ifndef DEBUG_CONSOLE_ENABLE_ECHO
#define DEBUG_CONSOLE_ENABLE_ECHO_FUNCTION 0
#else
#define DEBUG_CONSOLE_ENABLE_ECHO_FUNCTION 1
#endif /* DEBUG_CONSOLE_ENABLE_ECHO */

/*********************************************************************/

/***************Debug console other configuration*********************/
/*! @brief Definition to printf the float number. */
#ifndef PRINTF_FLOAT_ENABLE
#define PRINTF_FLOAT_ENABLE 0U
#endif /* PRINTF_FLOAT_ENABLE */

/*! @brief Definition to scanf the float number. */
#ifndef SCANF_FLOAT_ENABLE
#define SCANF_FLOAT_ENABLE 0U
#endif /* SCANF_FLOAT_ENABLE */

/*! @brief Definition to support advanced format specifier for printf. */
#ifndef PRINTF_ADVANCED_ENABLE
#define PRINTF_ADVANCED_ENABLE 0U
#endif /* PRINTF_ADVANCED_ENABLE */

/*! @brief Definition to support advanced format specifier for scanf. */
#ifndef SCANF_ADVANCED_ENABLE
#define SCANF_ADVANCED_ENABLE 0U
#endif /* SCANF_ADVANCED_ENABLE */

/*! @brief Definition to select virtual com(USB CDC) as the debug console. */
#ifndef BOARD_USE_VIRTUALCOM
#define BOARD_USE_VIRTUALCOM 0U
#endif
/*******************************************************************/

#endif /* _FSL_DEBUG_CONSOLE_CONF_H_ */