/* --COPYRIGHT--,BSD
 * Copyright (c) 2014, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * --/COPYRIGHT--*/
//*****************************************************************************
//
// pmm.h - Driver for the PMM Module.
//
//*****************************************************************************

#ifndef __MSP430WARE_PMM_H__
#define __MSP430WARE_PMM_H__

#include "inc/hw_memmap.h"

#ifdef __MSP430_HAS_PMM_FRAM__

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
// The following are values that can be passed to the mask parameter for
// functions: PMM_clearInterrupt(), and PMM_getInterruptStatus() as well as
// returned by the PMM_getInterruptStatus() function.
//
//*****************************************************************************
#define PMM_BOR_INTERRUPT                                             PMMBORIFG
#define PMM_RST_INTERRUPT                                             PMMRSTIFG
#define PMM_POR_INTERRUPT                                             PMMPORIFG
#define PMM_SVSH_INTERRUPT                                              SVSHIFG
#define PMM_LPM5_INTERRUPT                                           PMMLPM5IFG
#define PMM_ALL                                                          (0xA7)

//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************

//*****************************************************************************
//
//! \brief Enables the low power reset. SVSH does not reset device, but
//! triggers a system NMI
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_enableLowPowerReset(void);

//*****************************************************************************
//
//! \brief Disables the low power reset. SVSH resets device.
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_disableLowPowerReset(void);

//*****************************************************************************
//
//! \brief Enables the high-side SVS circuitry
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_enableSVSH(void);

//*****************************************************************************
//
//! \brief Disables the high-side SVS circuitry
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_disableSVSH(void);

//*****************************************************************************
//
//! \brief Makes the low-dropout voltage regulator (LDO) remain ON when going
//! into LPM 3/4.
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_turnOnRegulator(void);

//*****************************************************************************
//
//! \brief Turns OFF the low-dropout voltage regulator (LDO) when going into
//! LPM3/4, thus the system will enter LPM3.5 or LPM4.5 respectively
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_turnOffRegulator(void);

//*****************************************************************************
//
//! \brief Calling this function will trigger a software Power On Reset (POR).
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_trigPOR(void);

//*****************************************************************************
//
//! \brief Calling this function will trigger a software Brown Out Rest (BOR).
//!
//!
//! Modified bits of \b PMMCTL0 register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_trigBOR(void);

//*****************************************************************************
//
//! \brief Clears interrupt flags for the PMM
//!
//! \param mask is the mask for specifying the required flag
//!        Mask value is the logical OR of any of the following:
//!        - \b PMM_BOR_INTERRUPT - Software BOR interrupt
//!        - \b PMM_RST_INTERRUPT - RESET pin interrupt
//!        - \b PMM_POR_INTERRUPT - Software POR interrupt
//!        - \b PMM_SVSH_INTERRUPT - SVS high side interrupt
//!        - \b PMM_LPM5_INTERRUPT - LPM5 indication
//!        - \b PMM_ALL - All interrupts
//!
//! Modified bits of \b PMMCTL0 register and bits of \b PMMIFG register.
//!
//! \return None
//
//*****************************************************************************
extern void PMM_clearInterrupt(uint16_t mask);

//*****************************************************************************
//
//! \brief Returns interrupt status
//!
//! \param mask is the mask for specifying the required flag
//!        Mask value is the logical OR of any of the following:
//!        - \b PMM_BOR_INTERRUPT - Software BOR interrupt
//!        - \b PMM_RST_INTERRUPT - RESET pin interrupt
//!        - \b PMM_POR_INTERRUPT - Software POR interrupt
//!        - \b PMM_SVSH_INTERRUPT - SVS high side interrupt
//!        - \b PMM_LPM5_INTERRUPT - LPM5 indication
//!        - \b PMM_ALL - All interrupts
//!
//! \return Logical OR of any of the following:
//!         - \b PMM_BOR_INTERRUPT Software BOR interrupt
//!         - \b PMM_RST_INTERRUPT RESET pin interrupt
//!         - \b PMM_POR_INTERRUPT Software POR interrupt
//!         - \b PMM_SVSH_INTERRUPT SVS high side interrupt
//!         - \b PMM_LPM5_INTERRUPT LPM5 indication
//!         - \b PMM_ALL All interrupts
//!         \n indicating  the status of the selected  interrupt flags
//
//*****************************************************************************
extern uint16_t PMM_getInterruptStatus(uint16_t mask);

//*****************************************************************************
//
//! \brief Unlock LPM5
//!
//! LPMx.5 configuration is not locked and defaults to its reset condition.
//! Disable the GPIO power-on default high-impedance mode to activate
//! previously configured port settings.
//!
//!
//! \return None
//
//*****************************************************************************
extern void PMM_unlockLPM5(void);

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif
#endif // __MSP430WARE_PMM_H__