/*
 * FreeRTOS Kernel V10.3.0
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

	.extern ulRegTest1LoopCounter
	.extern ulRegTest2LoopCounter

	.global vRegTest1Implementation
	.global vRegTest2Implementation

/*-----------------------------------------------------------*/

/* Constants to define the additional registers found on the Pulpino RI5KY. */
#define lpstart0 	0x7b0
#define lpend0 		0x7b1
#define lpcount0 	0x7b2
#define lpstart1 	0x7b4
#define lpend1 		0x7b5
#define lpcount1 	0x7b6

/*-----------------------------------------------------------*/

/*
 * The register check tasks are described in the comments at the top of
 * main_full.c.
 */

.align( 4 )
vRegTest1Implementation:

	/* Fill the additional registers with known values. */
	li t0, 0xaa
	csrw lpstart0, t0
	li t0, 0xab
	csrw lpstart1, t0
	li t0, 0xac
	csrw lpend0, t0
	li t0, 0xad
	csrw lpend1, t0
	li t0, 0xae
	csrw lpcount0, t0
	li t0, 0xaf
	csrw lpcount1, t0

	/* Fill the core registers with known values. */
	li x5, 0x5
	li x6, 0x6
	li x7, 0x7
	li x8, 0x8
	li x9, 0x9
	li x10, 0xa
	li x11, 0xb
	li x12, 0xc
	li x13, 0xd
	li x14, 0xe
	li x15, 0xf
	li x16, 0x10
	li x17, 0x11
	li x18, 0x12
	li x19, 0x13
	li x20, 0x14
	li x21, 0x15
	li x22, 0x16
	li x23, 0x17
	li x24, 0x18
	li x25, 0x19
	li x26, 0x1a
	li x27, 0x1b
	li x28, 0x1c
	li x29, 0x1d
	li x30, 0x1e

reg1_loop:

	/* Check each register still contains the expected known value.
	vRegTest1Implementation uses x31 as the temporary, vRegTest2Implementation
	uses x5 as the temporary. */
	li x31, 0x5
	bne x31, x5, reg1_error_loop
	li x31, 0x6
	bne x31, x6, reg1_error_loop
	li x31, 0x7
	bne x31, x7, reg1_error_loop
	li x31, 0x8
	bne x31, x8, reg1_error_loop
	li x31, 0x9
	bne x31, x9, reg1_error_loop
	li x31, 0xa
	bne x31, x10, reg1_error_loop
	li x31, 0xb
	bne x31, x11, reg1_error_loop
	li x31, 0xc
	bne x31, x12, reg1_error_loop
	li x31, 0xd
	bne x31, x13, reg1_error_loop
	li x31, 0xe
	bne x31, x14, reg1_error_loop
	li x31, 0xf
	bne x31, x15, reg1_error_loop
	li x31, 0x10
	bne x31, x16, reg1_error_loop
	li x31, 0x11
	bne x31, x17, reg1_error_loop
	li x31, 0x12
	bne x31, x18, reg1_error_loop
	li x31, 0x13
	bne x31, x19, reg1_error_loop
	li x31, 0x14
	bne x31, x20, reg1_error_loop
	li x31, 0x15
	bne x31, x21, reg1_error_loop
	li x31, 0x16
	bne x31, x22, reg1_error_loop
	li x31, 0x17
	bne x31, x23, reg1_error_loop
	li x31, 0x18
	bne x31, x24, reg1_error_loop
	li x31, 0x19
	bne x31, x25, reg1_error_loop
	li x31, 0x1a
	bne x31, x26, reg1_error_loop
	li x31, 0x1b
	bne x31, x27, reg1_error_loop
	li x31, 0x1c
	bne x31, x28, reg1_error_loop
	li x31, 0x1d
	bne x31, x29, reg1_error_loop
	li x31, 0x1e
	bne x31, x30, reg1_error_loop

	/* Check additional chip specific registers still contain the expected
	values. */
	csrr x30, lpstart0
	li x31, 0xaa
	bne x30, x31, reg1_error_loop
	csrr x30, lpstart1
	li x31, 0xab
	bne x30, x31, reg1_error_loop
	csrr x30, lpend0
	li x31, 0xac
	bne x30, x31, reg1_error_loop
	csrr x30, lpend1
	li x31, 0xad
	bne x30, x31, reg1_error_loop
	csrr x30, lpcount0
	li x31, 0xae
	bne x30, x31, reg1_error_loop
	csrr x30, lpcount1
	li x31, 0xaf
	bne x30, x31, reg1_error_loop

	/* Everything passed, increment the loop counter. */
	lw x31, ulRegTest1LoopCounterConst
	lw x30, 0(x31)
	addi x30, x30, 1
	sw x30, 0(x31)

	/* Restore clobbered register reading for next loop. */
	li x30, 0x1e

	/* Yield to increase code coverage. */
	ecall

	/* Start again. */
	jal reg1_loop

reg1_error_loop:
	/* Jump here if a register contains an uxpected value.  This stops the loop
	counter being incremented so the check task knows an error was found. */
	ebreak
	jal reg1_error_loop

.align( 4 )
ulRegTest1LoopCounterConst: .word ulRegTest1LoopCounter

/*-----------------------------------------------------------*/

.align( 4 )
vRegTest2Implementation:

	/* Fill the additional registers with known values. */
	li t0, 0x1aa
	csrw lpstart0, t0
	li t0, 0x1ab
	csrw lpstart1, t0
	li t0, 0x1ac
	csrw lpend0, t0
	li t0, 0x1ad
	csrw lpend1, t0
	li t0, 0x1ae
	csrw lpcount0, t0
	li t0, 0x1af
	csrw lpcount1, t0

	/* Fill the core registers with known values. */
	li x6, 0x61
	li x7, 0x71
	li x8, 0x81
	li x9, 0x91
	li x10, 0xa1
	li x11, 0xb1
	li x12, 0xc1
	li x13, 0xd1
	li x14, 0xe1
	li x15, 0xf1
	li x16, 0x20
	li x17, 0x21
	li x18, 0x22
	li x19, 0x23
	li x20, 0x24
	li x21, 0x25
	li x22, 0x26
	li x23, 0x27
	li x24, 0x28
	li x25, 0x29
	li x26, 0x2a
	li x27, 0x2b
	li x28, 0x2c
	li x29, 0x2d
	li x30, 0x2e
	li x31, 0x2f

Reg2_loop:

	/* Check each register still contains the expected known value.
	vRegTest2Implementation uses x5 as the temporary, vRegTest1Implementation
	uses x31 as the temporary. */
	li x5, 0x61
	bne x5, x6, reg2_error_loop
	li x5, 0x71
	bne x5, x7, reg2_error_loop
	li x5, 0x81
	bne x5, x8, reg2_error_loop
	li x5, 0x91
	bne x5, x9, reg2_error_loop
	li x5, 0xa1
	bne x5, x10, reg2_error_loop
	li x5, 0xb1
	bne x5, x11, reg2_error_loop
	li x5, 0xc1
	bne x5, x12, reg2_error_loop
	li x5, 0xd1
	bne x5, x13, reg2_error_loop
	li x5, 0xe1
	bne x5, x14, reg2_error_loop
	li x5, 0xf1
	bne x5, x15, reg2_error_loop
	li x5, 0x20
	bne x5, x16, reg2_error_loop
	li x5, 0x21
	bne x5, x17, reg2_error_loop
	li x5, 0x22
	bne x5, x18, reg2_error_loop
	li x5, 0x23
	bne x5, x19, reg2_error_loop
	li x5, 0x24
	bne x5, x20, reg2_error_loop
	li x5, 0x25
	bne x5, x21, reg2_error_loop
	li x5, 0x26
	bne x5, x22, reg2_error_loop
	li x5, 0x27
	bne x5, x23, reg2_error_loop
	li x5, 0x28
	bne x5, x24, reg2_error_loop
	li x5, 0x29
	bne x5, x25, reg2_error_loop
	li x5, 0x2a
	bne x5, x26, reg2_error_loop
	li x5, 0x2b
	bne x5, x27, reg2_error_loop
	li x5, 0x2c
	bne x5, x28, reg2_error_loop
	li x5, 0x2d
	bne x5, x29, reg2_error_loop
	li x5, 0x2e
	bne x5, x30, reg2_error_loop
	li x5, 0x2f
	bne x5, x31, reg2_error_loop

	/* Check additional chip specific registers still contain the expected
	values. */
	csrr x5, lpstart0
	li x6, 0x1aa
	bne x5, x6, reg2_error_loop
	csrr x5, lpstart1
	li x6, 0x1ab
	bne x5, x6, reg2_error_loop
	csrr x5, lpend0
	li x6, 0x1ac
	bne x5, x6, reg2_error_loop
	csrr x5, lpend1
	li x6, 0x1ad
	bne x5, x6, reg2_error_loop
	csrr x5, lpcount0
	li x6, 0x1ae
	bne x5, x6, reg2_error_loop
	csrr x5, lpcount1
	li x6, 0x1af
	bne x5, x6, reg2_error_loop

	/* Everything passed, increment the loop counter. */
	lw x5, ulRegTest2LoopCounterConst
	lw x6, 0(x5)
	addi x6, x6, 1
	sw x6, 0(x5)

	/* Restore clobbered register reading for next loop. */
	li x6, 0x61

	/* Start again. */
	jal Reg2_loop

reg2_error_loop:
	/* Jump here if a register contains an uxpected value.  This stops the loop
	counter being incremented so the check task knows an error was found. */
	ebreak
	jal reg2_error_loop

.align( 4 )
ulRegTest2LoopCounterConst: .word ulRegTest2LoopCounter