/* | |
* FreeRTOS Kernel V10.2.1 | |
* Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining a copy of | |
* this software and associated documentation files (the "Software"), to deal in | |
* the Software without restriction, including without limitation the rights to | |
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
* the Software, and to permit persons to whom the Software is furnished to do so, | |
* subject to the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included in all | |
* copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
* | |
* http://www.FreeRTOS.org | |
* http://aws.amazon.com/freertos | |
* | |
* 1 tab == 4 spaces! | |
*/ | |
#ifndef SEMAPHORE_H | |
#define SEMAPHORE_H | |
#ifndef INC_FREERTOS_H | |
#error "include FreeRTOS.h" must appear in source files before "include semphr.h" | |
#endif | |
#include "queue.h" | |
typedef QueueHandle_t SemaphoreHandle_t; | |
#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( uint8_t ) 1U ) | |
#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( uint8_t ) 0U ) | |
#define semGIVE_BLOCK_TIME ( ( TickType_t ) 0U ) | |
/** | |
* semphr. h | |
* <pre>vSemaphoreCreateBinary( SemaphoreHandle_t xSemaphore )</pre> | |
* | |
* In many usage scenarios it is faster and more memory efficient to use a | |
* direct to task notification in place of a binary semaphore! | |
* http://www.freertos.org/RTOS-task-notifications.html | |
* | |
* This old vSemaphoreCreateBinary() macro is now deprecated in favour of the | |
* xSemaphoreCreateBinary() function. Note that binary semaphores created using | |
* the vSemaphoreCreateBinary() macro are created in a state such that the | |
* first call to 'take' the semaphore would pass, whereas binary semaphores | |
* created using xSemaphoreCreateBinary() are created in a state such that the | |
* the semaphore must first be 'given' before it can be 'taken'. | |
* | |
* <i>Macro</i> that implements a semaphore by using the existing queue mechanism. | |
* The queue length is 1 as this is a binary semaphore. The data size is 0 | |
* as we don't want to actually store any data - we just want to know if the | |
* queue is empty or full. | |
* | |
* This type of semaphore can be used for pure synchronisation between tasks or | |
* between an interrupt and a task. The semaphore need not be given back once | |
* obtained, so one task/interrupt can continuously 'give' the semaphore while | |
* another continuously 'takes' the semaphore. For this reason this type of | |
* semaphore does not use a priority inheritance mechanism. For an alternative | |
* that does use priority inheritance see xSemaphoreCreateMutex(). | |
* | |
* @param xSemaphore Handle to the created semaphore. Should be of type SemaphoreHandle_t. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore = NULL; | |
void vATask( void * pvParameters ) | |
{ | |
// Semaphore cannot be used before a call to vSemaphoreCreateBinary (). | |
// This is a macro so pass the variable in directly. | |
vSemaphoreCreateBinary( xSemaphore ); | |
if( xSemaphore != NULL ) | |
{ | |
// The semaphore was created successfully. | |
// The semaphore can now be used. | |
} | |
} | |
</pre> | |
* \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) | |
#define vSemaphoreCreateBinary( xSemaphore ) \ | |
{ \ | |
( xSemaphore ) = xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ); \ | |
if( ( xSemaphore ) != NULL ) \ | |
{ \ | |
( void ) xSemaphoreGive( ( xSemaphore ) ); \ | |
} \ | |
} | |
#endif | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateBinary( void )</pre> | |
* | |
* Creates a new binary semaphore instance, and returns a handle by which the | |
* new semaphore can be referenced. | |
* | |
* In many usage scenarios it is faster and more memory efficient to use a | |
* direct to task notification in place of a binary semaphore! | |
* http://www.freertos.org/RTOS-task-notifications.html | |
* | |
* Internally, within the FreeRTOS implementation, binary semaphores use a block | |
* of memory, in which the semaphore structure is stored. If a binary semaphore | |
* is created using xSemaphoreCreateBinary() then the required memory is | |
* automatically dynamically allocated inside the xSemaphoreCreateBinary() | |
* function. (see http://www.freertos.org/a00111.html). If a binary semaphore | |
* is created using xSemaphoreCreateBinaryStatic() then the application writer | |
* must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a | |
* binary semaphore to be created without using any dynamic memory allocation. | |
* | |
* The old vSemaphoreCreateBinary() macro is now deprecated in favour of this | |
* xSemaphoreCreateBinary() function. Note that binary semaphores created using | |
* the vSemaphoreCreateBinary() macro are created in a state such that the | |
* first call to 'take' the semaphore would pass, whereas binary semaphores | |
* created using xSemaphoreCreateBinary() are created in a state such that the | |
* the semaphore must first be 'given' before it can be 'taken'. | |
* | |
* This type of semaphore can be used for pure synchronisation between tasks or | |
* between an interrupt and a task. The semaphore need not be given back once | |
* obtained, so one task/interrupt can continuously 'give' the semaphore while | |
* another continuously 'takes' the semaphore. For this reason this type of | |
* semaphore does not use a priority inheritance mechanism. For an alternative | |
* that does use priority inheritance see xSemaphoreCreateMutex(). | |
* | |
* @return Handle to the created semaphore, or NULL if the memory required to | |
* hold the semaphore's data structures could not be allocated. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore = NULL; | |
void vATask( void * pvParameters ) | |
{ | |
// Semaphore cannot be used before a call to xSemaphoreCreateBinary(). | |
// This is a macro so pass the variable in directly. | |
xSemaphore = xSemaphoreCreateBinary(); | |
if( xSemaphore != NULL ) | |
{ | |
// The semaphore was created successfully. | |
// The semaphore can now be used. | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateBinary xSemaphoreCreateBinary | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateBinary() xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ) | |
#endif | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateBinaryStatic( StaticSemaphore_t *pxSemaphoreBuffer )</pre> | |
* | |
* Creates a new binary semaphore instance, and returns a handle by which the | |
* new semaphore can be referenced. | |
* | |
* NOTE: In many usage scenarios it is faster and more memory efficient to use a | |
* direct to task notification in place of a binary semaphore! | |
* http://www.freertos.org/RTOS-task-notifications.html | |
* | |
* Internally, within the FreeRTOS implementation, binary semaphores use a block | |
* of memory, in which the semaphore structure is stored. If a binary semaphore | |
* is created using xSemaphoreCreateBinary() then the required memory is | |
* automatically dynamically allocated inside the xSemaphoreCreateBinary() | |
* function. (see http://www.freertos.org/a00111.html). If a binary semaphore | |
* is created using xSemaphoreCreateBinaryStatic() then the application writer | |
* must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a | |
* binary semaphore to be created without using any dynamic memory allocation. | |
* | |
* This type of semaphore can be used for pure synchronisation between tasks or | |
* between an interrupt and a task. The semaphore need not be given back once | |
* obtained, so one task/interrupt can continuously 'give' the semaphore while | |
* another continuously 'takes' the semaphore. For this reason this type of | |
* semaphore does not use a priority inheritance mechanism. For an alternative | |
* that does use priority inheritance see xSemaphoreCreateMutex(). | |
* | |
* @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t, | |
* which will then be used to hold the semaphore's data structure, removing the | |
* need for the memory to be allocated dynamically. | |
* | |
* @return If the semaphore is created then a handle to the created semaphore is | |
* returned. If pxSemaphoreBuffer is NULL then NULL is returned. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore = NULL; | |
StaticSemaphore_t xSemaphoreBuffer; | |
void vATask( void * pvParameters ) | |
{ | |
// Semaphore cannot be used before a call to xSemaphoreCreateBinary(). | |
// The semaphore's data structures will be placed in the xSemaphoreBuffer | |
// variable, the address of which is passed into the function. The | |
// function's parameter is not NULL, so the function will not attempt any | |
// dynamic memory allocation, and therefore the function will not return | |
// return NULL. | |
xSemaphore = xSemaphoreCreateBinary( &xSemaphoreBuffer ); | |
// Rest of task code goes here. | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateBinaryStatic xSemaphoreCreateBinaryStatic | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateBinaryStatic( pxStaticSemaphore ) xQueueGenericCreateStatic( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticSemaphore, queueQUEUE_TYPE_BINARY_SEMAPHORE ) | |
#endif /* configSUPPORT_STATIC_ALLOCATION */ | |
/** | |
* semphr. h | |
* <pre>xSemaphoreTake( | |
* SemaphoreHandle_t xSemaphore, | |
* TickType_t xBlockTime | |
* )</pre> | |
* | |
* <i>Macro</i> to obtain a semaphore. The semaphore must have previously been | |
* created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or | |
* xSemaphoreCreateCounting(). | |
* | |
* @param xSemaphore A handle to the semaphore being taken - obtained when | |
* the semaphore was created. | |
* | |
* @param xBlockTime The time in ticks to wait for the semaphore to become | |
* available. The macro portTICK_PERIOD_MS can be used to convert this to a | |
* real time. A block time of zero can be used to poll the semaphore. A block | |
* time of portMAX_DELAY can be used to block indefinitely (provided | |
* INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h). | |
* | |
* @return pdTRUE if the semaphore was obtained. pdFALSE | |
* if xBlockTime expired without the semaphore becoming available. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore = NULL; | |
// A task that creates a semaphore. | |
void vATask( void * pvParameters ) | |
{ | |
// Create the semaphore to guard a shared resource. | |
xSemaphore = xSemaphoreCreateBinary(); | |
} | |
// A task that uses the semaphore. | |
void vAnotherTask( void * pvParameters ) | |
{ | |
// ... Do other things. | |
if( xSemaphore != NULL ) | |
{ | |
// See if we can obtain the semaphore. If the semaphore is not available | |
// wait 10 ticks to see if it becomes free. | |
if( xSemaphoreTake( xSemaphore, ( TickType_t ) 10 ) == pdTRUE ) | |
{ | |
// We were able to obtain the semaphore and can now access the | |
// shared resource. | |
// ... | |
// We have finished accessing the shared resource. Release the | |
// semaphore. | |
xSemaphoreGive( xSemaphore ); | |
} | |
else | |
{ | |
// We could not obtain the semaphore and can therefore not access | |
// the shared resource safely. | |
} | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreTake xSemaphoreTake | |
* \ingroup Semaphores | |
*/ | |
#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueSemaphoreTake( ( xSemaphore ), ( xBlockTime ) ) | |
/** | |
* semphr. h | |
* xSemaphoreTakeRecursive( | |
* SemaphoreHandle_t xMutex, | |
* TickType_t xBlockTime | |
* ) | |
* | |
* <i>Macro</i> to recursively obtain, or 'take', a mutex type semaphore. | |
* The mutex must have previously been created using a call to | |
* xSemaphoreCreateRecursiveMutex(); | |
* | |
* configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this | |
* macro to be available. | |
* | |
* This macro must not be used on mutexes created using xSemaphoreCreateMutex(). | |
* | |
* A mutex used recursively can be 'taken' repeatedly by the owner. The mutex | |
* doesn't become available again until the owner has called | |
* xSemaphoreGiveRecursive() for each successful 'take' request. For example, | |
* if a task successfully 'takes' the same mutex 5 times then the mutex will | |
* not be available to any other task until it has also 'given' the mutex back | |
* exactly five times. | |
* | |
* @param xMutex A handle to the mutex being obtained. This is the | |
* handle returned by xSemaphoreCreateRecursiveMutex(); | |
* | |
* @param xBlockTime The time in ticks to wait for the semaphore to become | |
* available. The macro portTICK_PERIOD_MS can be used to convert this to a | |
* real time. A block time of zero can be used to poll the semaphore. If | |
* the task already owns the semaphore then xSemaphoreTakeRecursive() will | |
* return immediately no matter what the value of xBlockTime. | |
* | |
* @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime | |
* expired without the semaphore becoming available. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xMutex = NULL; | |
// A task that creates a mutex. | |
void vATask( void * pvParameters ) | |
{ | |
// Create the mutex to guard a shared resource. | |
xMutex = xSemaphoreCreateRecursiveMutex(); | |
} | |
// A task that uses the mutex. | |
void vAnotherTask( void * pvParameters ) | |
{ | |
// ... Do other things. | |
if( xMutex != NULL ) | |
{ | |
// See if we can obtain the mutex. If the mutex is not available | |
// wait 10 ticks to see if it becomes free. | |
if( xSemaphoreTakeRecursive( xSemaphore, ( TickType_t ) 10 ) == pdTRUE ) | |
{ | |
// We were able to obtain the mutex and can now access the | |
// shared resource. | |
// ... | |
// For some reason due to the nature of the code further calls to | |
// xSemaphoreTakeRecursive() are made on the same mutex. In real | |
// code these would not be just sequential calls as this would make | |
// no sense. Instead the calls are likely to be buried inside | |
// a more complex call structure. | |
xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ); | |
xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ); | |
// The mutex has now been 'taken' three times, so will not be | |
// available to another task until it has also been given back | |
// three times. Again it is unlikely that real code would have | |
// these calls sequentially, but instead buried in a more complex | |
// call structure. This is just for illustrative purposes. | |
xSemaphoreGiveRecursive( xMutex ); | |
xSemaphoreGiveRecursive( xMutex ); | |
xSemaphoreGiveRecursive( xMutex ); | |
// Now the mutex can be taken by other tasks. | |
} | |
else | |
{ | |
// We could not obtain the mutex and can therefore not access | |
// the shared resource safely. | |
} | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive | |
* \ingroup Semaphores | |
*/ | |
#if( configUSE_RECURSIVE_MUTEXES == 1 ) | |
#define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) ) | |
#endif | |
/** | |
* semphr. h | |
* <pre>xSemaphoreGive( SemaphoreHandle_t xSemaphore )</pre> | |
* | |
* <i>Macro</i> to release a semaphore. The semaphore must have previously been | |
* created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or | |
* xSemaphoreCreateCounting(). and obtained using sSemaphoreTake(). | |
* | |
* This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for | |
* an alternative which can be used from an ISR. | |
* | |
* This macro must also not be used on semaphores created using | |
* xSemaphoreCreateRecursiveMutex(). | |
* | |
* @param xSemaphore A handle to the semaphore being released. This is the | |
* handle returned when the semaphore was created. | |
* | |
* @return pdTRUE if the semaphore was released. pdFALSE if an error occurred. | |
* Semaphores are implemented using queues. An error can occur if there is | |
* no space on the queue to post a message - indicating that the | |
* semaphore was not first obtained correctly. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore = NULL; | |
void vATask( void * pvParameters ) | |
{ | |
// Create the semaphore to guard a shared resource. | |
xSemaphore = vSemaphoreCreateBinary(); | |
if( xSemaphore != NULL ) | |
{ | |
if( xSemaphoreGive( xSemaphore ) != pdTRUE ) | |
{ | |
// We would expect this call to fail because we cannot give | |
// a semaphore without first "taking" it! | |
} | |
// Obtain the semaphore - don't block if the semaphore is not | |
// immediately available. | |
if( xSemaphoreTake( xSemaphore, ( TickType_t ) 0 ) ) | |
{ | |
// We now have the semaphore and can access the shared resource. | |
// ... | |
// We have finished accessing the shared resource so can free the | |
// semaphore. | |
if( xSemaphoreGive( xSemaphore ) != pdTRUE ) | |
{ | |
// We would not expect this call to fail because we must have | |
// obtained the semaphore to get here. | |
} | |
} | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreGive xSemaphoreGive | |
* \ingroup Semaphores | |
*/ | |
#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( QueueHandle_t ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK ) | |
/** | |
* semphr. h | |
* <pre>xSemaphoreGiveRecursive( SemaphoreHandle_t xMutex )</pre> | |
* | |
* <i>Macro</i> to recursively release, or 'give', a mutex type semaphore. | |
* The mutex must have previously been created using a call to | |
* xSemaphoreCreateRecursiveMutex(); | |
* | |
* configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this | |
* macro to be available. | |
* | |
* This macro must not be used on mutexes created using xSemaphoreCreateMutex(). | |
* | |
* A mutex used recursively can be 'taken' repeatedly by the owner. The mutex | |
* doesn't become available again until the owner has called | |
* xSemaphoreGiveRecursive() for each successful 'take' request. For example, | |
* if a task successfully 'takes' the same mutex 5 times then the mutex will | |
* not be available to any other task until it has also 'given' the mutex back | |
* exactly five times. | |
* | |
* @param xMutex A handle to the mutex being released, or 'given'. This is the | |
* handle returned by xSemaphoreCreateMutex(); | |
* | |
* @return pdTRUE if the semaphore was given. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xMutex = NULL; | |
// A task that creates a mutex. | |
void vATask( void * pvParameters ) | |
{ | |
// Create the mutex to guard a shared resource. | |
xMutex = xSemaphoreCreateRecursiveMutex(); | |
} | |
// A task that uses the mutex. | |
void vAnotherTask( void * pvParameters ) | |
{ | |
// ... Do other things. | |
if( xMutex != NULL ) | |
{ | |
// See if we can obtain the mutex. If the mutex is not available | |
// wait 10 ticks to see if it becomes free. | |
if( xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ) == pdTRUE ) | |
{ | |
// We were able to obtain the mutex and can now access the | |
// shared resource. | |
// ... | |
// For some reason due to the nature of the code further calls to | |
// xSemaphoreTakeRecursive() are made on the same mutex. In real | |
// code these would not be just sequential calls as this would make | |
// no sense. Instead the calls are likely to be buried inside | |
// a more complex call structure. | |
xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ); | |
xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ); | |
// The mutex has now been 'taken' three times, so will not be | |
// available to another task until it has also been given back | |
// three times. Again it is unlikely that real code would have | |
// these calls sequentially, it would be more likely that the calls | |
// to xSemaphoreGiveRecursive() would be called as a call stack | |
// unwound. This is just for demonstrative purposes. | |
xSemaphoreGiveRecursive( xMutex ); | |
xSemaphoreGiveRecursive( xMutex ); | |
xSemaphoreGiveRecursive( xMutex ); | |
// Now the mutex can be taken by other tasks. | |
} | |
else | |
{ | |
// We could not obtain the mutex and can therefore not access | |
// the shared resource safely. | |
} | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive | |
* \ingroup Semaphores | |
*/ | |
#if( configUSE_RECURSIVE_MUTEXES == 1 ) | |
#define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( ( xMutex ) ) | |
#endif | |
/** | |
* semphr. h | |
* <pre> | |
xSemaphoreGiveFromISR( | |
SemaphoreHandle_t xSemaphore, | |
BaseType_t *pxHigherPriorityTaskWoken | |
)</pre> | |
* | |
* <i>Macro</i> to release a semaphore. The semaphore must have previously been | |
* created with a call to xSemaphoreCreateBinary() or xSemaphoreCreateCounting(). | |
* | |
* Mutex type semaphores (those created using a call to xSemaphoreCreateMutex()) | |
* must not be used with this macro. | |
* | |
* This macro can be used from an ISR. | |
* | |
* @param xSemaphore A handle to the semaphore being released. This is the | |
* handle returned when the semaphore was created. | |
* | |
* @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set | |
* *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task | |
* to unblock, and the unblocked task has a priority higher than the currently | |
* running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then | |
* a context switch should be requested before the interrupt is exited. | |
* | |
* @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL. | |
* | |
* Example usage: | |
<pre> | |
\#define LONG_TIME 0xffff | |
\#define TICKS_TO_WAIT 10 | |
SemaphoreHandle_t xSemaphore = NULL; | |
// Repetitive task. | |
void vATask( void * pvParameters ) | |
{ | |
for( ;; ) | |
{ | |
// We want this task to run every 10 ticks of a timer. The semaphore | |
// was created before this task was started. | |
// Block waiting for the semaphore to become available. | |
if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE ) | |
{ | |
// It is time to execute. | |
// ... | |
// We have finished our task. Return to the top of the loop where | |
// we will block on the semaphore until it is time to execute | |
// again. Note when using the semaphore for synchronisation with an | |
// ISR in this manner there is no need to 'give' the semaphore back. | |
} | |
} | |
} | |
// Timer ISR | |
void vTimerISR( void * pvParameters ) | |
{ | |
static uint8_t ucLocalTickCount = 0; | |
static BaseType_t xHigherPriorityTaskWoken; | |
// A timer tick has occurred. | |
// ... Do other time functions. | |
// Is it time for vATask () to run? | |
xHigherPriorityTaskWoken = pdFALSE; | |
ucLocalTickCount++; | |
if( ucLocalTickCount >= TICKS_TO_WAIT ) | |
{ | |
// Unblock the task by releasing the semaphore. | |
xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken ); | |
// Reset the count so we release the semaphore again in 10 ticks time. | |
ucLocalTickCount = 0; | |
} | |
if( xHigherPriorityTaskWoken != pdFALSE ) | |
{ | |
// We can force a context switch here. Context switching from an | |
// ISR uses port specific syntax. Check the demo task for your port | |
// to find the syntax required. | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR | |
* \ingroup Semaphores | |
*/ | |
#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGiveFromISR( ( QueueHandle_t ) ( xSemaphore ), ( pxHigherPriorityTaskWoken ) ) | |
/** | |
* semphr. h | |
* <pre> | |
xSemaphoreTakeFromISR( | |
SemaphoreHandle_t xSemaphore, | |
BaseType_t *pxHigherPriorityTaskWoken | |
)</pre> | |
* | |
* <i>Macro</i> to take a semaphore from an ISR. The semaphore must have | |
* previously been created with a call to xSemaphoreCreateBinary() or | |
* xSemaphoreCreateCounting(). | |
* | |
* Mutex type semaphores (those created using a call to xSemaphoreCreateMutex()) | |
* must not be used with this macro. | |
* | |
* This macro can be used from an ISR, however taking a semaphore from an ISR | |
* is not a common operation. It is likely to only be useful when taking a | |
* counting semaphore when an interrupt is obtaining an object from a resource | |
* pool (when the semaphore count indicates the number of resources available). | |
* | |
* @param xSemaphore A handle to the semaphore being taken. This is the | |
* handle returned when the semaphore was created. | |
* | |
* @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set | |
* *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task | |
* to unblock, and the unblocked task has a priority higher than the currently | |
* running task. If xSemaphoreTakeFromISR() sets this value to pdTRUE then | |
* a context switch should be requested before the interrupt is exited. | |
* | |
* @return pdTRUE if the semaphore was successfully taken, otherwise | |
* pdFALSE | |
*/ | |
#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueReceiveFromISR( ( QueueHandle_t ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) ) | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateMutex( void )</pre> | |
* | |
* Creates a new mutex type semaphore instance, and returns a handle by which | |
* the new mutex can be referenced. | |
* | |
* Internally, within the FreeRTOS implementation, mutex semaphores use a block | |
* of memory, in which the mutex structure is stored. If a mutex is created | |
* using xSemaphoreCreateMutex() then the required memory is automatically | |
* dynamically allocated inside the xSemaphoreCreateMutex() function. (see | |
* http://www.freertos.org/a00111.html). If a mutex is created using | |
* xSemaphoreCreateMutexStatic() then the application writer must provided the | |
* memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created | |
* without using any dynamic memory allocation. | |
* | |
* Mutexes created using this function can be accessed using the xSemaphoreTake() | |
* and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and | |
* xSemaphoreGiveRecursive() macros must not be used. | |
* | |
* This type of semaphore uses a priority inheritance mechanism so a task | |
* 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the | |
* semaphore it is no longer required. | |
* | |
* Mutex type semaphores cannot be used from within interrupt service routines. | |
* | |
* See xSemaphoreCreateBinary() for an alternative implementation that can be | |
* used for pure synchronisation (where one task or interrupt always 'gives' the | |
* semaphore and another always 'takes' the semaphore) and from within interrupt | |
* service routines. | |
* | |
* @return If the mutex was successfully created then a handle to the created | |
* semaphore is returned. If there was not enough heap to allocate the mutex | |
* data structures then NULL is returned. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
void vATask( void * pvParameters ) | |
{ | |
// Semaphore cannot be used before a call to xSemaphoreCreateMutex(). | |
// This is a macro so pass the variable in directly. | |
xSemaphore = xSemaphoreCreateMutex(); | |
if( xSemaphore != NULL ) | |
{ | |
// The semaphore was created successfully. | |
// The semaphore can now be used. | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateMutex xSemaphoreCreateMutex | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX ) | |
#endif | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateMutexStatic( StaticSemaphore_t *pxMutexBuffer )</pre> | |
* | |
* Creates a new mutex type semaphore instance, and returns a handle by which | |
* the new mutex can be referenced. | |
* | |
* Internally, within the FreeRTOS implementation, mutex semaphores use a block | |
* of memory, in which the mutex structure is stored. If a mutex is created | |
* using xSemaphoreCreateMutex() then the required memory is automatically | |
* dynamically allocated inside the xSemaphoreCreateMutex() function. (see | |
* http://www.freertos.org/a00111.html). If a mutex is created using | |
* xSemaphoreCreateMutexStatic() then the application writer must provided the | |
* memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created | |
* without using any dynamic memory allocation. | |
* | |
* Mutexes created using this function can be accessed using the xSemaphoreTake() | |
* and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and | |
* xSemaphoreGiveRecursive() macros must not be used. | |
* | |
* This type of semaphore uses a priority inheritance mechanism so a task | |
* 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the | |
* semaphore it is no longer required. | |
* | |
* Mutex type semaphores cannot be used from within interrupt service routines. | |
* | |
* See xSemaphoreCreateBinary() for an alternative implementation that can be | |
* used for pure synchronisation (where one task or interrupt always 'gives' the | |
* semaphore and another always 'takes' the semaphore) and from within interrupt | |
* service routines. | |
* | |
* @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t, | |
* which will be used to hold the mutex's data structure, removing the need for | |
* the memory to be allocated dynamically. | |
* | |
* @return If the mutex was successfully created then a handle to the created | |
* mutex is returned. If pxMutexBuffer was NULL then NULL is returned. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
StaticSemaphore_t xMutexBuffer; | |
void vATask( void * pvParameters ) | |
{ | |
// A mutex cannot be used before it has been created. xMutexBuffer is | |
// into xSemaphoreCreateMutexStatic() so no dynamic memory allocation is | |
// attempted. | |
xSemaphore = xSemaphoreCreateMutexStatic( &xMutexBuffer ); | |
// As no dynamic memory allocation was performed, xSemaphore cannot be NULL, | |
// so there is no need to check it. | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateMutexStatic xSemaphoreCreateMutexStatic | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateMutexStatic( pxMutexBuffer ) xQueueCreateMutexStatic( queueQUEUE_TYPE_MUTEX, ( pxMutexBuffer ) ) | |
#endif /* configSUPPORT_STATIC_ALLOCATION */ | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateRecursiveMutex( void )</pre> | |
* | |
* Creates a new recursive mutex type semaphore instance, and returns a handle | |
* by which the new recursive mutex can be referenced. | |
* | |
* Internally, within the FreeRTOS implementation, recursive mutexs use a block | |
* of memory, in which the mutex structure is stored. If a recursive mutex is | |
* created using xSemaphoreCreateRecursiveMutex() then the required memory is | |
* automatically dynamically allocated inside the | |
* xSemaphoreCreateRecursiveMutex() function. (see | |
* http://www.freertos.org/a00111.html). If a recursive mutex is created using | |
* xSemaphoreCreateRecursiveMutexStatic() then the application writer must | |
* provide the memory that will get used by the mutex. | |
* xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to | |
* be created without using any dynamic memory allocation. | |
* | |
* Mutexes created using this macro can be accessed using the | |
* xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The | |
* xSemaphoreTake() and xSemaphoreGive() macros must not be used. | |
* | |
* A mutex used recursively can be 'taken' repeatedly by the owner. The mutex | |
* doesn't become available again until the owner has called | |
* xSemaphoreGiveRecursive() for each successful 'take' request. For example, | |
* if a task successfully 'takes' the same mutex 5 times then the mutex will | |
* not be available to any other task until it has also 'given' the mutex back | |
* exactly five times. | |
* | |
* This type of semaphore uses a priority inheritance mechanism so a task | |
* 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the | |
* semaphore it is no longer required. | |
* | |
* Mutex type semaphores cannot be used from within interrupt service routines. | |
* | |
* See xSemaphoreCreateBinary() for an alternative implementation that can be | |
* used for pure synchronisation (where one task or interrupt always 'gives' the | |
* semaphore and another always 'takes' the semaphore) and from within interrupt | |
* service routines. | |
* | |
* @return xSemaphore Handle to the created mutex semaphore. Should be of type | |
* SemaphoreHandle_t. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
void vATask( void * pvParameters ) | |
{ | |
// Semaphore cannot be used before a call to xSemaphoreCreateMutex(). | |
// This is a macro so pass the variable in directly. | |
xSemaphore = xSemaphoreCreateRecursiveMutex(); | |
if( xSemaphore != NULL ) | |
{ | |
// The semaphore was created successfully. | |
// The semaphore can now be used. | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateRecursiveMutex xSemaphoreCreateRecursiveMutex | |
* \ingroup Semaphores | |
*/ | |
#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) ) | |
#define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX ) | |
#endif | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateRecursiveMutexStatic( StaticSemaphore_t *pxMutexBuffer )</pre> | |
* | |
* Creates a new recursive mutex type semaphore instance, and returns a handle | |
* by which the new recursive mutex can be referenced. | |
* | |
* Internally, within the FreeRTOS implementation, recursive mutexs use a block | |
* of memory, in which the mutex structure is stored. If a recursive mutex is | |
* created using xSemaphoreCreateRecursiveMutex() then the required memory is | |
* automatically dynamically allocated inside the | |
* xSemaphoreCreateRecursiveMutex() function. (see | |
* http://www.freertos.org/a00111.html). If a recursive mutex is created using | |
* xSemaphoreCreateRecursiveMutexStatic() then the application writer must | |
* provide the memory that will get used by the mutex. | |
* xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to | |
* be created without using any dynamic memory allocation. | |
* | |
* Mutexes created using this macro can be accessed using the | |
* xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The | |
* xSemaphoreTake() and xSemaphoreGive() macros must not be used. | |
* | |
* A mutex used recursively can be 'taken' repeatedly by the owner. The mutex | |
* doesn't become available again until the owner has called | |
* xSemaphoreGiveRecursive() for each successful 'take' request. For example, | |
* if a task successfully 'takes' the same mutex 5 times then the mutex will | |
* not be available to any other task until it has also 'given' the mutex back | |
* exactly five times. | |
* | |
* This type of semaphore uses a priority inheritance mechanism so a task | |
* 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the | |
* semaphore it is no longer required. | |
* | |
* Mutex type semaphores cannot be used from within interrupt service routines. | |
* | |
* See xSemaphoreCreateBinary() for an alternative implementation that can be | |
* used for pure synchronisation (where one task or interrupt always 'gives' the | |
* semaphore and another always 'takes' the semaphore) and from within interrupt | |
* service routines. | |
* | |
* @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t, | |
* which will then be used to hold the recursive mutex's data structure, | |
* removing the need for the memory to be allocated dynamically. | |
* | |
* @return If the recursive mutex was successfully created then a handle to the | |
* created recursive mutex is returned. If pxMutexBuffer was NULL then NULL is | |
* returned. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
StaticSemaphore_t xMutexBuffer; | |
void vATask( void * pvParameters ) | |
{ | |
// A recursive semaphore cannot be used before it is created. Here a | |
// recursive mutex is created using xSemaphoreCreateRecursiveMutexStatic(). | |
// The address of xMutexBuffer is passed into the function, and will hold | |
// the mutexes data structures - so no dynamic memory allocation will be | |
// attempted. | |
xSemaphore = xSemaphoreCreateRecursiveMutexStatic( &xMutexBuffer ); | |
// As no dynamic memory allocation was performed, xSemaphore cannot be NULL, | |
// so there is no need to check it. | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateRecursiveMutexStatic xSemaphoreCreateRecursiveMutexStatic | |
* \ingroup Semaphores | |
*/ | |
#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) ) | |
#define xSemaphoreCreateRecursiveMutexStatic( pxStaticSemaphore ) xQueueCreateMutexStatic( queueQUEUE_TYPE_RECURSIVE_MUTEX, pxStaticSemaphore ) | |
#endif /* configSUPPORT_STATIC_ALLOCATION */ | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateCounting( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount )</pre> | |
* | |
* Creates a new counting semaphore instance, and returns a handle by which the | |
* new counting semaphore can be referenced. | |
* | |
* In many usage scenarios it is faster and more memory efficient to use a | |
* direct to task notification in place of a counting semaphore! | |
* http://www.freertos.org/RTOS-task-notifications.html | |
* | |
* Internally, within the FreeRTOS implementation, counting semaphores use a | |
* block of memory, in which the counting semaphore structure is stored. If a | |
* counting semaphore is created using xSemaphoreCreateCounting() then the | |
* required memory is automatically dynamically allocated inside the | |
* xSemaphoreCreateCounting() function. (see | |
* http://www.freertos.org/a00111.html). If a counting semaphore is created | |
* using xSemaphoreCreateCountingStatic() then the application writer can | |
* instead optionally provide the memory that will get used by the counting | |
* semaphore. xSemaphoreCreateCountingStatic() therefore allows a counting | |
* semaphore to be created without using any dynamic memory allocation. | |
* | |
* Counting semaphores are typically used for two things: | |
* | |
* 1) Counting events. | |
* | |
* In this usage scenario an event handler will 'give' a semaphore each time | |
* an event occurs (incrementing the semaphore count value), and a handler | |
* task will 'take' a semaphore each time it processes an event | |
* (decrementing the semaphore count value). The count value is therefore | |
* the difference between the number of events that have occurred and the | |
* number that have been processed. In this case it is desirable for the | |
* initial count value to be zero. | |
* | |
* 2) Resource management. | |
* | |
* In this usage scenario the count value indicates the number of resources | |
* available. To obtain control of a resource a task must first obtain a | |
* semaphore - decrementing the semaphore count value. When the count value | |
* reaches zero there are no free resources. When a task finishes with the | |
* resource it 'gives' the semaphore back - incrementing the semaphore count | |
* value. In this case it is desirable for the initial count value to be | |
* equal to the maximum count value, indicating that all resources are free. | |
* | |
* @param uxMaxCount The maximum count value that can be reached. When the | |
* semaphore reaches this value it can no longer be 'given'. | |
* | |
* @param uxInitialCount The count value assigned to the semaphore when it is | |
* created. | |
* | |
* @return Handle to the created semaphore. Null if the semaphore could not be | |
* created. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
void vATask( void * pvParameters ) | |
{ | |
SemaphoreHandle_t xSemaphore = NULL; | |
// Semaphore cannot be used before a call to xSemaphoreCreateCounting(). | |
// The max value to which the semaphore can count should be 10, and the | |
// initial value assigned to the count should be 0. | |
xSemaphore = xSemaphoreCreateCounting( 10, 0 ); | |
if( xSemaphore != NULL ) | |
{ | |
// The semaphore was created successfully. | |
// The semaphore can now be used. | |
} | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) ) | |
#endif | |
/** | |
* semphr. h | |
* <pre>SemaphoreHandle_t xSemaphoreCreateCountingStatic( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount, StaticSemaphore_t *pxSemaphoreBuffer )</pre> | |
* | |
* Creates a new counting semaphore instance, and returns a handle by which the | |
* new counting semaphore can be referenced. | |
* | |
* In many usage scenarios it is faster and more memory efficient to use a | |
* direct to task notification in place of a counting semaphore! | |
* http://www.freertos.org/RTOS-task-notifications.html | |
* | |
* Internally, within the FreeRTOS implementation, counting semaphores use a | |
* block of memory, in which the counting semaphore structure is stored. If a | |
* counting semaphore is created using xSemaphoreCreateCounting() then the | |
* required memory is automatically dynamically allocated inside the | |
* xSemaphoreCreateCounting() function. (see | |
* http://www.freertos.org/a00111.html). If a counting semaphore is created | |
* using xSemaphoreCreateCountingStatic() then the application writer must | |
* provide the memory. xSemaphoreCreateCountingStatic() therefore allows a | |
* counting semaphore to be created without using any dynamic memory allocation. | |
* | |
* Counting semaphores are typically used for two things: | |
* | |
* 1) Counting events. | |
* | |
* In this usage scenario an event handler will 'give' a semaphore each time | |
* an event occurs (incrementing the semaphore count value), and a handler | |
* task will 'take' a semaphore each time it processes an event | |
* (decrementing the semaphore count value). The count value is therefore | |
* the difference between the number of events that have occurred and the | |
* number that have been processed. In this case it is desirable for the | |
* initial count value to be zero. | |
* | |
* 2) Resource management. | |
* | |
* In this usage scenario the count value indicates the number of resources | |
* available. To obtain control of a resource a task must first obtain a | |
* semaphore - decrementing the semaphore count value. When the count value | |
* reaches zero there are no free resources. When a task finishes with the | |
* resource it 'gives' the semaphore back - incrementing the semaphore count | |
* value. In this case it is desirable for the initial count value to be | |
* equal to the maximum count value, indicating that all resources are free. | |
* | |
* @param uxMaxCount The maximum count value that can be reached. When the | |
* semaphore reaches this value it can no longer be 'given'. | |
* | |
* @param uxInitialCount The count value assigned to the semaphore when it is | |
* created. | |
* | |
* @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t, | |
* which will then be used to hold the semaphore's data structure, removing the | |
* need for the memory to be allocated dynamically. | |
* | |
* @return If the counting semaphore was successfully created then a handle to | |
* the created counting semaphore is returned. If pxSemaphoreBuffer was NULL | |
* then NULL is returned. | |
* | |
* Example usage: | |
<pre> | |
SemaphoreHandle_t xSemaphore; | |
StaticSemaphore_t xSemaphoreBuffer; | |
void vATask( void * pvParameters ) | |
{ | |
SemaphoreHandle_t xSemaphore = NULL; | |
// Counting semaphore cannot be used before they have been created. Create | |
// a counting semaphore using xSemaphoreCreateCountingStatic(). The max | |
// value to which the semaphore can count is 10, and the initial value | |
// assigned to the count will be 0. The address of xSemaphoreBuffer is | |
// passed in and will be used to hold the semaphore structure, so no dynamic | |
// memory allocation will be used. | |
xSemaphore = xSemaphoreCreateCounting( 10, 0, &xSemaphoreBuffer ); | |
// No memory allocation was attempted so xSemaphore cannot be NULL, so there | |
// is no need to check its value. | |
} | |
</pre> | |
* \defgroup xSemaphoreCreateCountingStatic xSemaphoreCreateCountingStatic | |
* \ingroup Semaphores | |
*/ | |
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) | |
#define xSemaphoreCreateCountingStatic( uxMaxCount, uxInitialCount, pxSemaphoreBuffer ) xQueueCreateCountingSemaphoreStatic( ( uxMaxCount ), ( uxInitialCount ), ( pxSemaphoreBuffer ) ) | |
#endif /* configSUPPORT_STATIC_ALLOCATION */ | |
/** | |
* semphr. h | |
* <pre>void vSemaphoreDelete( SemaphoreHandle_t xSemaphore );</pre> | |
* | |
* Delete a semaphore. This function must be used with care. For example, | |
* do not delete a mutex type semaphore if the mutex is held by a task. | |
* | |
* @param xSemaphore A handle to the semaphore to be deleted. | |
* | |
* \defgroup vSemaphoreDelete vSemaphoreDelete | |
* \ingroup Semaphores | |
*/ | |
#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( QueueHandle_t ) ( xSemaphore ) ) | |
/** | |
* semphr.h | |
* <pre>TaskHandle_t xSemaphoreGetMutexHolder( SemaphoreHandle_t xMutex );</pre> | |
* | |
* If xMutex is indeed a mutex type semaphore, return the current mutex holder. | |
* If xMutex is not a mutex type semaphore, or the mutex is available (not held | |
* by a task), return NULL. | |
* | |
* Note: This is a good way of determining if the calling task is the mutex | |
* holder, but not a good way of determining the identity of the mutex holder as | |
* the holder may change between the function exiting and the returned value | |
* being tested. | |
*/ | |
#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) ) | |
/** | |
* semphr.h | |
* <pre>TaskHandle_t xSemaphoreGetMutexHolderFromISR( SemaphoreHandle_t xMutex );</pre> | |
* | |
* If xMutex is indeed a mutex type semaphore, return the current mutex holder. | |
* If xMutex is not a mutex type semaphore, or the mutex is available (not held | |
* by a task), return NULL. | |
* | |
*/ | |
#define xSemaphoreGetMutexHolderFromISR( xSemaphore ) xQueueGetMutexHolderFromISR( ( xSemaphore ) ) | |
/** | |
* semphr.h | |
* <pre>UBaseType_t uxSemaphoreGetCount( SemaphoreHandle_t xSemaphore );</pre> | |
* | |
* If the semaphore is a counting semaphore then uxSemaphoreGetCount() returns | |
* its current count value. If the semaphore is a binary semaphore then | |
* uxSemaphoreGetCount() returns 1 if the semaphore is available, and 0 if the | |
* semaphore is not available. | |
* | |
*/ | |
#define uxSemaphoreGetCount( xSemaphore ) uxQueueMessagesWaiting( ( QueueHandle_t ) ( xSemaphore ) ) | |
#endif /* SEMAPHORE_H */ | |