/*
	FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify it 
	under the terms of the GNU General Public License (version 2) as published
	by the Free Software Foundation and modified by the FreeRTOS exception.

	FreeRTOS.org is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
	more details.

	You should have received a copy of the GNU General Public License along 
	with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59 
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.

	A special exception to the GPL is included to allow you to distribute a 
	combined work that includes FreeRTOS.org without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details.


	***************************************************************************
	*                                                                         *
	* Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/

/*
Changes from V1.2.3

	+ The function xPortInitMinimal() has been renamed to 
	  xSerialPortInitMinimal() and the function xPortInit() has been renamed
	  to xSerialPortInit().

Changes from V2.0.0

	+ Delay periods are now specified using variables and constants of
	  portTickType rather than unsigned portLONG.
	+ xQueueReceiveFromISR() used in place of xQueueReceive() within the ISR.

Changes from V2.6.0

	+ Replaced the inb() and outb() functions with direct memory
	  access.  This allows the port to be built with the 20050414 build of
	  WinAVR.
*/

/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER. */


#include <stdlib.h>
#include <avr/interrupt.h>
#include "FreeRTOS.h"
#include "queue.h"
#include "task.h"
#include "serial.h"

#define serBAUD_DIV_CONSTANT			( ( unsigned portLONG ) 16 )

/* Constants for writing to UCSRB. */
#define serRX_INT_ENABLE				( ( unsigned portCHAR ) 0x80 )
#define serRX_ENABLE					( ( unsigned portCHAR ) 0x10 )
#define serTX_ENABLE					( ( unsigned portCHAR ) 0x08 )
#define serTX_INT_ENABLE				( ( unsigned portCHAR ) 0x20 )

/* Constants for writing to UCSRC. */
#define serUCSRC_SELECT					( ( unsigned portCHAR ) 0x80 )
#define serEIGHT_DATA_BITS				( ( unsigned portCHAR ) 0x06 )

static xQueueHandle xRxedChars; 
static xQueueHandle xCharsForTx; 

#define vInterruptOn()										\
{															\
	unsigned portCHAR ucByte;								\
															\
	ucByte = UCSRB;											\
	ucByte |= serTX_INT_ENABLE;								\
	UCSRB = ucByte;											\
}																				
/*-----------------------------------------------------------*/

#define vInterruptOff()										\
{															\
	unsigned portCHAR ucInByte;								\
															\
	ucInByte = UCSRB;										\
	ucInByte &= ~serTX_INT_ENABLE;							\
	UCSRB = ucInByte;										\
}
/*-----------------------------------------------------------*/

xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned portLONG ulBaudRateCounter;
unsigned portCHAR ucByte;

	portENTER_CRITICAL();
	{
		/* Create the queues used by the com test task. */
		xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );
		xCharsForTx = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) );

		/* Calculate the baud rate register value from the equation in the
		data sheet. */
		ulBaudRateCounter = ( configCPU_CLOCK_HZ / ( serBAUD_DIV_CONSTANT * ulWantedBaud ) ) - ( unsigned portLONG ) 1;

		/* Set the baud rate. */	
		ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );	
		UBRRL = ucByte;

		ulBaudRateCounter >>= ( unsigned portLONG ) 8;
		ucByte = ( unsigned portCHAR ) ( ulBaudRateCounter & ( unsigned portLONG ) 0xff );	
		UBRRH = ucByte;

		/* Enable the Rx interrupt.  The Tx interrupt will get enabled
		later. Also enable the Rx and Tx. */
		UCSRB = ( serRX_INT_ENABLE | serRX_ENABLE | serTX_ENABLE );

		/* Set the data bits to 8. */
		UCSRC = ( serUCSRC_SELECT | serEIGHT_DATA_BITS );
	}
	portEXIT_CRITICAL();
	
	/* Unlike other ports, this serial code does not allow for more than one
	com port.  We therefore don't return a pointer to a port structure and can
	instead just return NULL. */
	return NULL;
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime )
{
	/* Only one port is supported. */
	( void ) pxPort;

	/* Get the next character from the buffer.  Return false if no characters
	are available, or arrive before xBlockTime expires. */
	if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) )
	{
		return pdTRUE;
	}
	else
	{
		return pdFALSE;
	}
}
/*-----------------------------------------------------------*/

signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime )
{
	/* Only one port is supported. */
	( void ) pxPort;

	/* Return false if after the block time there is no room on the Tx queue. */
	if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
	{
		return pdFAIL;
	}

	vInterruptOn();

	return pdPASS;
}
/*-----------------------------------------------------------*/

void vSerialClose( xComPortHandle xPort )
{
unsigned portCHAR ucByte;

	/* The parameter is not used. */
	( void ) xPort;

	/* Turn off the interrupts.  We may also want to delete the queues and/or
	re-install the original ISR. */

	portENTER_CRITICAL();
	{
		vInterruptOff();
		ucByte = UCSRB;
		ucByte &= ~serRX_INT_ENABLE;
		UCSRB = ucByte;
	}
	portEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/

SIGNAL( SIG_UART_RECV )
{
signed portCHAR cChar;
signed portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;

	/* Get the character and post it on the queue of Rxed characters.
	If the post causes a task to wake force a context switch as the woken task
	may have a higher priority than the task we have interrupted. */
	cChar = UDR;

	xQueueSendFromISR( xRxedChars, &cChar, &xHigherPriorityTaskWoken );

	if( xHigherPriorityTaskWoken != pdFALSE )
	{
		taskYIELD();
	}
}
/*-----------------------------------------------------------*/

SIGNAL( SIG_UART_DATA )
{
signed portCHAR cChar, cTaskWoken;

	if( xQueueReceiveFromISR( xCharsForTx, &cChar, &cTaskWoken ) == pdTRUE )
	{
		/* Send the next character queued for Tx. */
		UDR = cChar;
	}
	else
	{
		/* Queue empty, nothing to send. */
		vInterruptOff();
	}
}