Demo/MB96340_Softune/FreeRTOS_96348hs_SK16FX100PMC/Src/FreeRTOSConfig.h

/*
	FreeRTOS.org V5.2.0 - Copyright (C) 2003-2009 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify it 
	under the terms of the GNU General Public License (version 2) as published
	by the Free Software Foundation and modified by the FreeRTOS exception.

	FreeRTOS.org is distributed in the hope that it will be useful,	but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
	more details.

	You should have received a copy of the GNU General Public License along 
	with FreeRTOS.org; if not, write to the Free Software Foundation, Inc., 59 
	Temple Place, Suite 330, Boston, MA  02111-1307  USA.

	A special exception to the GPL is included to allow you to distribute a 
	combined work that includes FreeRTOS.org without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details.


	***************************************************************************
	*                                                                         *
	* Get the FreeRTOS eBook!  See http://www.FreeRTOS.org/Documentation      *
	*                                                                         *
	* This is a concise, step by step, 'hands on' guide that describes both   *
	* general multitasking concepts and FreeRTOS specifics. It presents and   *
	* explains numerous examples that are written using the FreeRTOS API.     *
	* Full source code for all the examples is provided in an accompanying    *
	* .zip file.                                                              *
	*                                                                         *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
*/

#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

/* Device specific includes. */
#include "mb96348hs.h"

/* 
 * The below define should be same as the option selected by the Memory 
 * Model (Project->Setup Project->C Compiler->Category->Target Depend ) 
 *
 * Valid settings here include:
 * ------- Memory models ---------      Data	  Code
 * portSMALL							16 Bit    16 Bit
 * portMEDIUM							16 Bit    24 Bit
 * portCOMPACT							24 Bit    16 Bit
 * portLARGE							24 Bit    24 Bit
 */
#define configMEMMODEL portMEDIUM

/* Demo specific definition - set this to 1 if you want to include the task
that writes trace and debug information to the UART.  If it is set to 0 then
the ComTest tasks will be included in place of the trace task. */
#define INCLUDE_TraceListTasks		0

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
 *----------------------------------------------------------*/
#define configUSE_PREEMPTION		1
#define configUSE_IDLE_HOOK			1
#define configUSE_TICK_HOOK			0
#define configMINIMAL_STACK_SIZE	( ( unsigned portSHORT ) 180 ) /* This can be greatly reduced when using the small or medium memory model. */
#define configCPU_CLOCK_HZ			( ( unsigned portLONG ) 56000000 )	/* Clock setup from start.asm in the demo application. */
#define configCLKP1_CLOCK_HZ		( ( unsigned portLONG ) 56000000 )	/* Clock setup from start.asm in the demo application. */
#define configTICK_RATE_HZ			( (portTickType) 1000 )
#define configMAX_PRIORITIES		( ( unsigned portBASE_TYPE ) 6 )
#define configTOTAL_HEAP_SIZE		( (size_t) (20000) )
#define configMAX_TASK_NAME_LEN		( 20 )
#define configUSE_16_BIT_TICKS		1
#define configIDLE_SHOULD_YIELD		1
#define configUSE_MUTEXES			1
#define configUSE_TRACE_FACILITY	1

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES			1
#define configMAX_CO_ROUTINE_PRIORITIES ( 4 )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet			1
#define INCLUDE_uxTaskPriorityGet			1
#define INCLUDE_vTaskDelete					1
#define INCLUDE_vTaskCleanUpResources		1
#define INCLUDE_vTaskSuspend				1
#define INCLUDE_vResumeFromISR				1
#define INCLUDE_vTaskDelayUntil				1
#define INCLUDE_vTaskDelay					1
#define INCLUDE_xTaskGetSchedulerState		1
#define INCLUDE_xTaskGetCurrentTaskHandle	1


#define configKERNEL_INTERRUPT_PRIORITY 6

#endif /* FREERTOS_CONFIG_H */